Re: BUG: blank screen - unless keyboard/synaptic combo

linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* Re: BUG: blank screen - unless keyboard/synaptic combo
       [not found] <4A12FCB2.6090409@gmail.com>
@ 2009-05-21 22:58 ` Niel Lambrechts
  2009-05-22  3:39   ` Zhang Rui
  0 siblings, 1 reply; 6+ messages in thread
From: Niel Lambrechts @ 2009-05-21 22:58 UTC (permalink / raw)
  To: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org

[-- Attachment #1: Type: text/plain, Size: 1776 bytes --]

Cc's added, attached lspci output.

On 05/19/2009 08:38 PM, Niel Lambrechts wrote:
> I have a strange problem in that during a resume from hibernate my
> text console (or X) remains blank - that is, until I simultaneously
> press a keyboard key and touch the synaptic pad. It is not sufficient
> to press just one or the other, it needs to be done simultaneously and
> it resumes fine after doing this.

I have tried quite hard to overcome this issue. All of the following hibernation 
tests I tried involved booting into a text console, without ever starting X. 
With each test I still had a blank screen upon resume, and each time it was 
fully recoverable by pressing any keyboard key/synaptic pad touch combo.

1. Disabling a CPU core - NO CHANGE.
Based on a "multi-processor concurrency" fix mentioned on the web (Ubuntu bug 
#272307).

2. Upgrade BIOS to latest level - NO CHANGE.
BIOS 6FET70WW, released 04/17/2009.

3. Switching to ATI Mobility Radeon HD 3650 graphics card. NO CHANGE.
My Lenovo W500 has "switchable graphics" BIOS option, and I tried this test with 
both the integrated or the above-mentioned card without difference.
_This result seems quite interesting to me, as if it could be some type of bus 
related freeze where the keyboard/synaptic combo plays a role._

4. Disabling BIOS Options - NO CHANGE.
Enabling/disabling security chip features + TXT features.
Disabling fingerprint reader.
Disabling memory security feature.

5. Kernel options - NO CHANGE.
ACPI debugging - I enabled CONFIG_ACPI_DEBUG, but did not see any messages 
generated when I pressed a keyboard key + synaptic mousepad combo that recovers 
the console.
FIRMWARE_EDID - still testing this.

Any suggestions on anything else I could try would be most welcome...!

Thanks,
Niel


[-- Attachment #2: lspci-vvv.txt --]
[-- Type: text/plain, Size: 54331 bytes --]

linux-7vph:~ # lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
        Subsystem: Lenovo Device 20e0                                                        
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-                                                                                        
        Latency: 0                                                                                
        Capabilities: [e0] Vendor Specific Information <?>                                        
        Kernel driver in use: agpgart-intel                                                       
        Kernel modules: intel-agp                                                                 

00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])                                                  
        Subsystem: Lenovo Device 2114                                                             
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0                                                                                
        Interrupt: pin A routed to IRQ 31                                                         
        Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]                         
        Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]                           
        Region 4: I/O ports at 1800 [size=8]                                                      
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+           
                Address: fee0300c  Data: 41e9                                                     
        Capabilities: [d0] Power Management version 3                                             
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       

00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)                                                                                       
        Subsystem: Lenovo Device 2114                                                             
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0                                                                                
        Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M]                         
        Capabilities: [d0] Power Management version 3                                             
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       

00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)                                                                                                 
        Subsystem: Lenovo Device 20e6                                                             
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+                                                                                        
        Latency: 0                                                                                
        Interrupt: pin A routed to IRQ 11                                                         
        Region 0: Memory at fc226800 (64-bit, non-prefetchable) [size=16]                         
        Capabilities: [50] Power Management version 3                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-           
                Address: 0000000000000000  Data: 0000                                             

00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
        Subsystem: Lenovo Device 20ee                                                     
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0                                                                                
        Interrupt: pin A routed to IRQ 29                                                         
        Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=128K]                       
        Region 1: Memory at fc025000 (32-bit, non-prefetchable) [size=4K]                         
        Region 2: I/O ports at 1840 [size=32]                                                     
        Capabilities: [c8] Power Management version 2                                             
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-                                       
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+           
                Address: 00000000fee0300c  Data: 41e1                                             
        Capabilities: [e0] PCIe advanced features <?>                                             
        Kernel driver in use: e1000e                                                              
        Kernel modules: e1000e                                                                    

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])                                                                                  
        Subsystem: Lenovo Device 20f0                                                             
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin A routed to IRQ 20                                                         
        Region 4: I/O ports at 1860 [size=32]                                                     
        Capabilities: [50] PCIe advanced features <?>                                             
        Kernel modules: uhci-hcd                                                                  

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])                                                                                  
        Subsystem: Lenovo Device 20f0                                                             
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin B routed to IRQ 21                                                         
        Region 4: I/O ports at 1880 [size=32]                                                     
        Capabilities: [50] PCIe advanced features <?>                                             
        Kernel modules: uhci-hcd                                                                  

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])                                                                                  
        Subsystem: Lenovo Device 20f0                                                             
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin C routed to IRQ 22                                                         
        Region 4: I/O ports at 18a0 [size=32]                                                     
        Capabilities: [50] PCIe advanced features <?>                                             
        Kernel modules: uhci-hcd                                                                  

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])                                                                                 
        Subsystem: Lenovo Device 20f1                                                             
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin D routed to IRQ 23                                                         
        Region 0: Memory at fc226c00 (32-bit, non-prefetchable) [size=1K]                         
        Capabilities: [50] Power Management version 2                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)      
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [58] Debug port: BAR=1 offset=00a0                                          
        Capabilities: [98] PCIe advanced features <?>                                             
        Kernel modules: ehci-hcd                                                                  

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
        Subsystem: Lenovo Device 20f2                                                    
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0, Cache Line Size: 64 bytes                                                     
        Interrupt: pin B routed to IRQ 17                                                         
        Region 0: Memory at fc020000 (64-bit, non-prefetchable) [size=16K]                        
        Capabilities: [50] Power Management version 2                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)       
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-           
                Address: 0000000000000000  Data: 0000                                             
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00                  
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us             
                        ExtTag- RBE- FLReset+                                                     
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+                              
                        MaxPayload 128 bytes, MaxReadReq 128 bytes                                
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-               
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us 
                        ClockPM- Suprise- LLActRep- BwNot-                                        
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-                                
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                            
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Virtual Channel <?>                                                   
        Capabilities: [130] Root Complex Link <?>                                                 
        Kernel driver in use: HDA Intel                                                           
        Kernel modules: snd-hda-intel                                                             

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])                                                                                 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0, Cache Line Size: 64 bytes                                                     
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0                              
        I/O behind bridge: 0000f000-00000fff                                                      
        Memory behind bridge: fff00000-000fffff                                                   
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff                      
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-                                                                                              
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                             
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                               
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00                                 
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us             
                        ExtTag- RBE+ FLReset-                                                     
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-                              
                        MaxPayload 128 bytes, MaxReadReq 128 bytes                                
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-               
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us   
                        ClockPM- Suprise- LLActRep+ BwNot-                                        
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-                   
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                            
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+                 
                        Slot #  0, PowerLimit 6.500000; Interlock- NoCompl-                       
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-           
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-               
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-              
                        Changed: MRL- PresDet- LinkState-                                         
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-           
                RootCap: CRSVisible-                                                              
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-                                   
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+           
                Address: fee0100c  Data: 4169                                                     
        Capabilities: [90] Subsystem: Lenovo Device 20f3                                          
        Capabilities: [a0] Power Management version 2                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [100] Virtual Channel <?>                                                   
        Capabilities: [180] Root Complex Link <?>                                                 
        Kernel driver in use: pcieport-driver                                                     
        Kernel modules: shpchp                                                                    

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])                                                                                 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0, Cache Line Size: 64 bytes                                                     
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0                              
        I/O behind bridge: 0000f000-00000fff                                                      
        Memory behind bridge: f4300000-f43fffff                                                   
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff                      
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-                                                                                              
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                             
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                               
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00                                 
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us             
                        ExtTag- RBE+ FLReset-                                                     
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-                              
                        MaxPayload 128 bytes, MaxReadReq 128 bytes                                
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-               
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us 
                        ClockPM- Suprise- LLActRep+ BwNot-                                        
                LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+                 
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                            
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+                 
                        Slot #  1, PowerLimit 6.500000; Interlock- NoCompl-                       
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-           
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-               
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-              
                        Changed: MRL- PresDet+ LinkState+                                         
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-           
                RootCap: CRSVisible-                                                              
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-                                   
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+           
                Address: fee0100c  Data: 4171                                                     
        Capabilities: [90] Subsystem: Lenovo Device 20f3                                          
        Capabilities: [a0] Power Management version 2                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [100] Virtual Channel <?>                                                   
        Capabilities: [180] Root Complex Link <?>                                                 
        Kernel driver in use: pcieport-driver                                                     
        Kernel modules: shpchp                                                                    

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])                                                                                 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0, Cache Line Size: 64 bytes                                                     
        Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0                              
        I/O behind bridge: 00002000-00002fff                                                      
        Memory behind bridge: f8000000-f9ffffff                                                   
        Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff                      
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-                                                                                              
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                             
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                               
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00                                 
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us             
                        ExtTag- RBE+ FLReset-                                                     
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-                              
                        MaxPayload 128 bytes, MaxReadReq 128 bytes                                
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-               
                LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us   
                        ClockPM- Suprise- LLActRep+ BwNot-                                        
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-             
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                            
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+                 
                        Slot #  3, PowerLimit 6.500000; Interlock- NoCompl-                       
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-           
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-               
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-              
                        Changed: MRL- PresDet- LinkState-                                         
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-           
                RootCap: CRSVisible-                                                              
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-                                   
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+           
                Address: fee0100c  Data: 4179                                                     
        Capabilities: [90] Subsystem: Lenovo Device 20f3                                          
        Capabilities: [a0] Power Management version 2                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [100] Virtual Channel <?>                                                   
        Capabilities: [180] Root Complex Link <?>                                                 
        Kernel driver in use: pcieport-driver                                                     
        Kernel modules: shpchp                                                                    

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])                                                                                 
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0, Cache Line Size: 64 bytes                                                     
        Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0                              
        I/O behind bridge: 00003000-00003fff                                                      
        Memory behind bridge: fa000000-fbffffff                                                   
        Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff                      
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-                                                                                              
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                             
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                               
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00                                 
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us             
                        ExtTag- RBE+ FLReset-                                                     
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-                              
                        MaxPayload 128 bytes, MaxReadReq 128 bytes                                
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-               
                LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us   
                        ClockPM- Suprise- LLActRep+ BwNot-                                        
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-             
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                            
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+                 
                        Slot #  4, PowerLimit 6.500000; Interlock- NoCompl-                       
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-           
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-               
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-              
                        Changed: MRL- PresDet- LinkState-                                         
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-           
                RootCap: CRSVisible-                                                              
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-                                   
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+           
                Address: fee0100c  Data: 4181                                                     
        Capabilities: [90] Subsystem: Lenovo Device 20f3                                          
        Capabilities: [a0] Power Management version 2                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [100] Virtual Channel <?>                                                   
        Capabilities: [180] Root Complex Link <?>                                                 
        Kernel driver in use: pcieport-driver                                                     
        Kernel modules: shpchp                                                                    

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])                                                                                  
        Subsystem: Lenovo Device 20f0                                                             
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin A routed to IRQ 16                                                         
        Region 4: I/O ports at 18c0 [size=32]                                                     
        Capabilities: [50] PCIe advanced features <?>                                             
        Kernel modules: uhci-hcd                                                                  

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])                                                                                  
        Subsystem: Lenovo Device 20f0                                                             
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin B routed to IRQ 17                                                         
        Region 4: I/O ports at 18e0 [size=32]                                                     
        Capabilities: [50] PCIe advanced features <?>                                             
        Kernel modules: uhci-hcd                                                                  

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])                                                                                  
        Subsystem: Lenovo Device 20f0                                                             
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin C routed to IRQ 18                                                         
        Region 4: I/O ports at 1c00 [size=32]                                                     
        Capabilities: [50] PCIe advanced features <?>                                             
        Kernel modules: uhci-hcd                                                                  

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])                                                                                 
        Subsystem: Lenovo Device 20f1                                                             
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin D routed to IRQ 19                                                         
        Region 0: Memory at fc227000 (32-bit, non-prefetchable) [size=1K]                         
        Capabilities: [50] Power Management version 2                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)      
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [58] Debug port: BAR=1 offset=00a0                                          
        Capabilities: [98] PCIe advanced features <?>                                             
        Kernel modules: ehci-hcd                                                                  

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])                                                                                            
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0                                                                                
        Bus: primary=00, secondary=15, subordinate=18, sec-latency=32                             
        I/O behind bridge: 00004000-00007fff                                                      
        Memory behind bridge: f4800000-f7ffffff                                                   
        Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff                      
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-                                                                                            
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-                             
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                               
        Capabilities: [50] Subsystem: Lenovo Device 20f4                                          

00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
        Subsystem: Lenovo Device 20f5                                          
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Latency: 0                                                                                
        Capabilities: [e0] Vendor Specific Information <?>                                        
        Kernel modules: iTCO_wdt                                                                  

00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])                                                                                          
        Subsystem: Lenovo Device 20f8                                                             
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Latency: 0                                                                                
        Interrupt: pin B routed to IRQ 28                                                         
        Region 0: I/O ports at 1c48 [size=8]                                                      
        Region 1: I/O ports at 183c [size=4]                                                      
        Region 2: I/O ports at 1c40 [size=8]                                                      
        Region 3: I/O ports at 1838 [size=4]                                                      
        Region 4: I/O ports at 1c20 [size=32]                                                     
        Region 5: Memory at fc226000 (32-bit, non-prefetchable) [size=2K]                         
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+          
                Address: fee0100c  Data: 4189                                                     
        Capabilities: [70] Power Management version 3                                             
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [a8] SATA HBA <?>                                                           
        Capabilities: [b0] PCIe advanced features <?>                                             
        Kernel driver in use: ahci                                                                
        Kernel modules: ahci                                                                      

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
        Subsystem: Lenovo Device 20f9                                          
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Interrupt: pin A routed to IRQ 23                                                         
        Region 0: Memory at fc227400 (64-bit, non-prefetchable) [size=256]                        
        Region 4: I/O ports at 1c60 [size=32]                                                     
        Kernel driver in use: i801_smbus                                                          
        Kernel modules: i2c-i801                                                                  

03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
        Subsystem: Intel Corporation Device 1011                     
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                        
        Latency: 0, Cache Line Size: 64 bytes                                                     
        Interrupt: pin A routed to IRQ 30                                                         
        Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]                         
        Capabilities: [c8] Power Management version 3                                             
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                       
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+           
                Address: 00000000fee0100c  Data: 41b9                                             
        Capabilities: [e0] Express (v1) Endpoint, MSI 00                                          
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited       
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+                           
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-                     
                        MaxPayload 128 bytes, MaxReadReq 128 bytes                                
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-               
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
                        ClockPM+ Suprise- LLActRep- BwNot-                                        
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+             
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-                            
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Advanced Error Reporting                                              
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-                                                                                  
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-                                                                                  
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-                                                                                  
                CESta:  RxErr- BadTLP+ BadDLLP- Rollover- Timeout+ NonFatalErr+                   
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+                   
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-                   
        Capabilities: [140] Device Serial Number a0-33-b2-ff-ff-ea-16-00                          
        Kernel driver in use: iwlagn                                                              
        Kernel modules: iwlagn                                                                    

15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
        Subsystem: Lenovo Device 20c6                   
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Latency: 32, Cache Line Size: 64 bytes                                                    
        Interrupt: pin A routed to IRQ 16                                                         
        Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]                         
        Bus: primary=15, secondary=16, subordinate=17, sec-latency=176                            
        Memory window 0: f0000000-f3fff000 (prefetchable)                                         
        Memory window 1: 80000000-83fff000 (prefetchable)                                         
        I/O window 0: 00004000-000040ff                                                           
        I/O window 1: 00004400-000044ff                                                           
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+                     
        16-bit legacy interface ports at 0001                                                     
        Kernel modules: yenta_socket                                                              

15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI])                                                                                                 
        Subsystem: Lenovo Device 20c7                                                             
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes                            
        Interrupt: pin B routed to IRQ 17                                                         
        Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]                         
        Capabilities: [dc] Power Management version 2                                             
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=2 PME+                                       
        Kernel driver in use: ohci1394                                                            
        Kernel modules: ohci1394                                                                  

15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
        Subsystem: Lenovo Device 20c8                                                     
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Latency: 32, Cache Line Size: 64 bytes                                                    
        Interrupt: pin C routed to IRQ 11                                                         
        Region 0: Memory at f4801800 (32-bit, non-prefetchable) [size=256]                        
        Capabilities: [80] Power Management version 2                                             
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-                                       

15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11)
        Subsystem: Lenovo Device 20c9                                      
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-                                                                                       
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-                                                                                      
        Latency: 32, Cache Line Size: 64 bytes                                                    
        Interrupt: pin C routed to IRQ 11                                                         
        Region 0: Memory at f4801c00 (32-bit, non-prefetchable) [size=256]                        
        Capabilities: [80] Power Management version 2                                             
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)        
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-                                       

15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
        Subsystem: Lenovo Device 20ca
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 11
        Region 0: Memory at f4802000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
        Subsystem: Lenovo Device 20cb
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 11
        Region 0: Memory at f4802400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: BUG: blank screen - unless keyboard/synaptic combo
  2009-05-21 22:58 ` BUG: blank screen - unless keyboard/synaptic combo Niel Lambrechts
@ 2009-05-22  3:39   ` Zhang Rui
  2009-05-22 18:12     ` Niel Lambrechts
  0 siblings, 1 reply; 6+ messages in thread
From: Zhang Rui @ 2009-05-22  3:39 UTC (permalink / raw)
  To: Niel Lambrechts; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org

is this a regression or it exists on all the kernel you've tried?
please remote login the box after resume, and get the output of
"xrandr --verbose".

thanks,
rui

On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote:
> Cc's added, attached lspci output.
> 
> On 05/19/2009 08:38 PM, Niel Lambrechts wrote:
> > I have a strange problem in that during a resume from hibernate my
> > text console (or X) remains blank - that is, until I simultaneously
> > press a keyboard key and touch the synaptic pad. It is not sufficient
> > to press just one or the other, it needs to be done simultaneously and
> > it resumes fine after doing this.
> 
> I have tried quite hard to overcome this issue. All of the following hibernation 
> tests I tried involved booting into a text console, without ever starting X. 
> With each test I still had a blank screen upon resume, and each time it was 
> fully recoverable by pressing any keyboard key/synaptic pad touch combo.
> 
> 1. Disabling a CPU core - NO CHANGE.
> Based on a "multi-processor concurrency" fix mentioned on the web (Ubuntu bug 
> #272307).
> 
> 2. Upgrade BIOS to latest level - NO CHANGE.
> BIOS 6FET70WW, released 04/17/2009.
> 
> 3. Switching to ATI Mobility Radeon HD 3650 graphics card. NO CHANGE.
> My Lenovo W500 has "switchable graphics" BIOS option, and I tried this test with 
> both the integrated or the above-mentioned card without difference.
> _This result seems quite interesting to me, as if it could be some type of bus 
> related freeze where the keyboard/synaptic combo plays a role._
> 
> 4. Disabling BIOS Options - NO CHANGE.
> Enabling/disabling security chip features + TXT features.
> Disabling fingerprint reader.
> Disabling memory security feature.
> 
> 5. Kernel options - NO CHANGE.
> ACPI debugging - I enabled CONFIG_ACPI_DEBUG, but did not see any messages 
> generated when I pressed a keyboard key + synaptic mousepad combo that recovers 
> the console.
> FIRMWARE_EDID - still testing this.
> 
> Any suggestions on anything else I could try would be most welcome...!
> 
> Thanks,
> Niel
> 


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: BUG: blank screen - unless keyboard/synaptic combo
  2009-05-22  3:39   ` Zhang Rui
@ 2009-05-22 18:12     ` Niel Lambrechts
  2009-05-25  5:58       ` Zhang Rui
  0 siblings, 1 reply; 6+ messages in thread
From: Niel Lambrechts @ 2009-05-22 18:12 UTC (permalink / raw)
  To: Zhang Rui; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org

(fixed top posting)

On 05/22/2009 05:39 AM, Zhang Rui wrote:
> On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote:
>    
>> Cc's added, attached lspci output.
>>
>> On 05/19/2009 08:38 PM, Niel Lambrechts wrote:
>>      
>>> I have a strange problem in that during a resume from hibernate my
>>> text console (or X) remains blank - that is, until I simultaneously
>>> press a keyboard key and touch the synaptic pad. It is not sufficient
>>> to press just one or the other, it needs to be done simultaneously and
>>> it resumes fine after doing this.
>>>        
> is this a regression or it exists on all the kernel you've tried?
>    
Hi Zhang,

It is not a recent regression, all of the kernels I tried back to 2.6.28 
shows the same problem. The test results I posted last night was with 
2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong 
since I could not bisect that far back (I am using EXT4 and have too 
many issues to bisect that far back).

> please remote login the box after resume, and get the output of
> "xrandr --verbose".
>    

When I resume from suspend to RAM there is no problem.

When I resume from hibernate, my laptop actually remains unusable until 
I do the combination of things I mentioned. I cannot log in from remote 
or even ping the laptop, except if I first press the mentioned key 
combo. Before this, the display is either entirely blank or sometimes 
there is a white cursor in the top left corner.

The blank screen happens in runlevel 3 without X or "i915" loaded - I'm 
not sure but I suppose you want the "xrandr" output for another reason. 
It is interesting that it happens regardless of whether I am using Intel 
integrated graphics or Mobility Radeon HD 3650 (my laptop has both and I 
can enable one at a time). I boot the system with vga=791 and it is 
using vesafb for console.

I attached the output you asked for below after hibernating an Xorg 
session, but this is from just after pressing the combo as I could not 
log in over the network with the laptop in the blank state.

Thanks,
Niel


niella@linux-7vph:> xrandr --verbose
Screen 0: minimum 320 x 200, current 1600 x 1024, maximum 3840 x 1200
VGA disconnected 1600x1024+0+0 (0x3d) normal (normal left inverted right 
x axis y axis) 0mm x 0mm
         Identifier: 0x3b
         Timestamp:  184631
         Subpixel:   unknown
         Clones:
         CRTC:       0
         CRTCs:      0 1
         Transform:  1.000000 0.000000 0.000000
                     0.000000 1.000000 0.000000
                     0.000000 0.000000 1.000000
                    filter:
   1600x1024 (0x3d)  136.4MHz *current
         h: width  1600 start 1704 end 1872 total 2144 skew    0 clock   
63.6KHz
         v: height 1024 start 1025 end 1028 total 1060           clock   
60.0Hz
LVDS connected 1600x1024+0+0 (0x3d) normal (normal left inverted right x 
axis y axis) 331mm x 207mm
         Identifier: 0x3c
         Timestamp:  184631
         Subpixel:   horizontal rgb
         Clones:
         CRTC:       1
         CRTCs:      1
         Transform:  1.000000 0.000000 0.000000
                     0.000000 1.000000 0.000000
                     0.000000 0.000000 1.000000
                    filter:
         EDID_DATA:
                 00ffffffffffff0030ae554000000000
                 0011010380211578ea87f594574f8c27
                 27505400000001010101010101010101
                 0101010101018c41807a71b011403020
                 33004bcf100000197434802071b01440
                 302026004bcf100000190000000f00d1
                 0a32d10a281101004ca35532000000fe
                 004c544e31353455322d4c30350a0011
         PANEL_FITTING:  full_aspect
                 supported: center       full_aspect  full
         BACKLIGHT_CONTROL:      combination
                 supported: native       legacy       combination  kernel
         BACKLIGHT: 4722 (0x00001272)    range:  (0,4722)
   1600x1024 (0x3d)  136.4MHz *current +preferred
         h: width  1600 start 1704 end 1872 total 2144 skew    0 clock   
63.6KHz
         v: height 1024 start 1025 end 1028 total 1060           clock   
60.0Hz
   1920x1200 (0x3e)  167.8MHz -HSync -VSync +preferred
         h: width  1920 start 1968 end 2000 total 2298 skew    0 clock   
73.0KHz
         v: height 1200 start 1203 end 1206 total 1217           clock   
60.0Hz
   1920x1200 (0x3f)  134.3MHz -HSync -VSync
         h: width  1920 start 1968 end 2000 total 2208 skew    0 clock   
60.8KHz
         v: height 1200 start 1202 end 1208 total 1220           clock   
49.8Hz
   1600x1200 (0x40)  162.0MHz +HSync +VSync
         h: width  1600 start 1664 end 1856 total 2160 skew    0 clock   
75.0KHz
         v: height 1200 start 1201 end 1204 total 1250           clock   
60.0Hz
   1400x1050 (0x41)  122.0MHz +HSync +VSync
         h: width  1400 start 1488 end 1640 total 1880 skew    0 clock   
64.9KHz
         v: height 1050 start 1052 end 1064 total 1082           clock   
60.0Hz
   1280x1024 (0x42)  108.0MHz +HSync +VSync
         h: width  1280 start 1328 end 1440 total 1688 skew    0 clock   
64.0KHz
         v: height 1024 start 1025 end 1028 total 1066           clock   
60.0Hz
   1280x960 (0x43)  108.0MHz +HSync +VSync
         h: width  1280 start 1376 end 1488 total 1800 skew    0 clock   
60.0KHz
         v: height  960 start  961 end  964 total 1000           clock   
60.0Hz
   1024x768 (0x44)   65.0MHz -HSync -VSync
         h: width  1024 start 1048 end 1184 total 1344 skew    0 clock   
48.4KHz
         v: height  768 start  771 end  777 total  806           clock   
60.0Hz
   800x600 (0x45)   40.0MHz +HSync +VSync
         h: width   800 start  840 end  968 total 1056 skew    0 clock   
37.9KHz
         v: height  600 start  601 end  605 total  628           clock   
60.3Hz
   800x600 (0x46)   36.0MHz +HSync +VSync
         h: width   800 start  824 end  896 total 1024 skew    0 clock   
35.2KHz
         v: height  600 start  601 end  603 total  625           clock   
56.2Hz
   640x480 (0x47)   25.2MHz -HSync -VSync
         h: width   640 start  656 end  752 total  800 skew    0 clock   
31.5KHz
         v: height  480 start  490 end  492 total  525           clock   
59.9Hz


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: BUG: blank screen - unless keyboard/synaptic combo
  2009-05-22 18:12     ` Niel Lambrechts
@ 2009-05-25  5:58       ` Zhang Rui
  2009-05-25  6:35         ` Niel Lambrechts
  0 siblings, 1 reply; 6+ messages in thread
From: Zhang Rui @ 2009-05-25  5:58 UTC (permalink / raw)
  To: Niel Lambrechts; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org

please attach the dmesg output after S4 resume.

thanks,
rui

On Sat, 2009-05-23 at 02:12 +0800, Niel Lambrechts wrote:
> (fixed top posting)
> 
> On 05/22/2009 05:39 AM, Zhang Rui wrote:
> > On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote:
> >    
> >> Cc's added, attached lspci output.
> >>
> >> On 05/19/2009 08:38 PM, Niel Lambrechts wrote:
> >>      
> >>> I have a strange problem in that during a resume from hibernate my
> >>> text console (or X) remains blank - that is, until I simultaneously
> >>> press a keyboard key and touch the synaptic pad. It is not sufficient
> >>> to press just one or the other, it needs to be done simultaneously and
> >>> it resumes fine after doing this.
> >>>        
> > is this a regression or it exists on all the kernel you've tried?
> >    
> Hi Zhang,
> 
> It is not a recent regression, all of the kernels I tried back to 2.6.28 
> shows the same problem. The test results I posted last night was with 
> 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong 
> since I could not bisect that far back (I am using EXT4 and have too 
> many issues to bisect that far back).
> 
> > please remote login the box after resume, and get the output of
> > "xrandr --verbose".
> >    
> 
> When I resume from suspend to RAM there is no problem.
> 
> When I resume from hibernate, my laptop actually remains unusable until 
> I do the combination of things I mentioned. I cannot log in from remote 
> or even ping the laptop, except if I first press the mentioned key 
> combo. Before this, the display is either entirely blank or sometimes 
> there is a white cursor in the top left corner.
> 
> The blank screen happens in runlevel 3 without X or "i915" loaded - I'm 
> not sure but I suppose you want the "xrandr" output for another reason. 
> It is interesting that it happens regardless of whether I am using Intel 
> integrated graphics or Mobility Radeon HD 3650 (my laptop has both and I 
> can enable one at a time). I boot the system with vga=791 and it is 
> using vesafb for console.
> 
> I attached the output you asked for below after hibernating an Xorg 
> session, but this is from just after pressing the combo as I could not 
> log in over the network with the laptop in the blank state.
> 
> Thanks,
> Niel
> 
> 
> niella@linux-7vph:> xrandr --verbose
> Screen 0: minimum 320 x 200, current 1600 x 1024, maximum 3840 x 1200
> VGA disconnected 1600x1024+0+0 (0x3d) normal (normal left inverted right 
> x axis y axis) 0mm x 0mm
>          Identifier: 0x3b
>          Timestamp:  184631
>          Subpixel:   unknown
>          Clones:
>          CRTC:       0
>          CRTCs:      0 1
>          Transform:  1.000000 0.000000 0.000000
>                      0.000000 1.000000 0.000000
>                      0.000000 0.000000 1.000000
>                     filter:
>    1600x1024 (0x3d)  136.4MHz *current
>          h: width  1600 start 1704 end 1872 total 2144 skew    0 clock   
> 63.6KHz
>          v: height 1024 start 1025 end 1028 total 1060           clock   
> 60.0Hz
> LVDS connected 1600x1024+0+0 (0x3d) normal (normal left inverted right x 
> axis y axis) 331mm x 207mm
>          Identifier: 0x3c
>          Timestamp:  184631
>          Subpixel:   horizontal rgb
>          Clones:
>          CRTC:       1
>          CRTCs:      1
>          Transform:  1.000000 0.000000 0.000000
>                      0.000000 1.000000 0.000000
>                      0.000000 0.000000 1.000000
>                     filter:
>          EDID_DATA:
>                  00ffffffffffff0030ae554000000000
>                  0011010380211578ea87f594574f8c27
>                  27505400000001010101010101010101
>                  0101010101018c41807a71b011403020
>                  33004bcf100000197434802071b01440
>                  302026004bcf100000190000000f00d1
>                  0a32d10a281101004ca35532000000fe
>                  004c544e31353455322d4c30350a0011
>          PANEL_FITTING:  full_aspect
>                  supported: center       full_aspect  full
>          BACKLIGHT_CONTROL:      combination
>                  supported: native       legacy       combination  kernel
>          BACKLIGHT: 4722 (0x00001272)    range:  (0,4722)
>    1600x1024 (0x3d)  136.4MHz *current +preferred
>          h: width  1600 start 1704 end 1872 total 2144 skew    0 clock   
> 63.6KHz
>          v: height 1024 start 1025 end 1028 total 1060           clock   
> 60.0Hz
>    1920x1200 (0x3e)  167.8MHz -HSync -VSync +preferred
>          h: width  1920 start 1968 end 2000 total 2298 skew    0 clock   
> 73.0KHz
>          v: height 1200 start 1203 end 1206 total 1217           clock   
> 60.0Hz
>    1920x1200 (0x3f)  134.3MHz -HSync -VSync
>          h: width  1920 start 1968 end 2000 total 2208 skew    0 clock   
> 60.8KHz
>          v: height 1200 start 1202 end 1208 total 1220           clock   
> 49.8Hz
>    1600x1200 (0x40)  162.0MHz +HSync +VSync
>          h: width  1600 start 1664 end 1856 total 2160 skew    0 clock   
> 75.0KHz
>          v: height 1200 start 1201 end 1204 total 1250           clock   
> 60.0Hz
>    1400x1050 (0x41)  122.0MHz +HSync +VSync
>          h: width  1400 start 1488 end 1640 total 1880 skew    0 clock   
> 64.9KHz
>          v: height 1050 start 1052 end 1064 total 1082           clock   
> 60.0Hz
>    1280x1024 (0x42)  108.0MHz +HSync +VSync
>          h: width  1280 start 1328 end 1440 total 1688 skew    0 clock   
> 64.0KHz
>          v: height 1024 start 1025 end 1028 total 1066           clock   
> 60.0Hz
>    1280x960 (0x43)  108.0MHz +HSync +VSync
>          h: width  1280 start 1376 end 1488 total 1800 skew    0 clock   
> 60.0KHz
>          v: height  960 start  961 end  964 total 1000           clock   
> 60.0Hz
>    1024x768 (0x44)   65.0MHz -HSync -VSync
>          h: width  1024 start 1048 end 1184 total 1344 skew    0 clock   
> 48.4KHz
>          v: height  768 start  771 end  777 total  806           clock   
> 60.0Hz
>    800x600 (0x45)   40.0MHz +HSync +VSync
>          h: width   800 start  840 end  968 total 1056 skew    0 clock   
> 37.9KHz
>          v: height  600 start  601 end  605 total  628           clock   
> 60.3Hz
>    800x600 (0x46)   36.0MHz +HSync +VSync
>          h: width   800 start  824 end  896 total 1024 skew    0 clock   
> 35.2KHz
>          v: height  600 start  601 end  603 total  625           clock   
> 56.2Hz
>    640x480 (0x47)   25.2MHz -HSync -VSync
>          h: width   640 start  656 end  752 total  800 skew    0 clock   
> 31.5KHz
>          v: height  480 start  490 end  492 total  525           clock   
> 59.9Hz
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: BUG: blank screen - unless keyboard/synaptic combo
  2009-05-25  5:58       ` Zhang Rui
@ 2009-05-25  6:35         ` Niel Lambrechts
  2009-06-01  5:08           ` Niel Lambrechts
  0 siblings, 1 reply; 6+ messages in thread
From: Niel Lambrechts @ 2009-05-25  6:35 UTC (permalink / raw)
  To: Zhang Rui; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org

[-- Attachment #1: Type: text/plain, Size: 7030 bytes --]

Attached - this was using 2.6.30-rc6 and Xorg. Please let me know if you 
would also like dmesg output for when I do a console based resume.

Regards,
Niel

On 05/25/2009 07:58 AM, Zhang Rui wrote:
> please attach the dmesg output after S4 resume.
>
> thanks,
> rui
>
> On Sat, 2009-05-23 at 02:12 +0800, Niel Lambrechts wrote:
>    
>> (fixed top posting)
>>
>> On 05/22/2009 05:39 AM, Zhang Rui wrote:
>>      
>>> On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote:
>>>
>>>        
>>>> Cc's added, attached lspci output.
>>>>
>>>> On 05/19/2009 08:38 PM, Niel Lambrechts wrote:
>>>>
>>>>          
>>>>> I have a strange problem in that during a resume from hibernate my
>>>>> text console (or X) remains blank - that is, until I simultaneously
>>>>> press a keyboard key and touch the synaptic pad. It is not sufficient
>>>>> to press just one or the other, it needs to be done simultaneously and
>>>>> it resumes fine after doing this.
>>>>>
>>>>>            
>>> is this a regression or it exists on all the kernel you've tried?
>>>
>>>        
>> Hi Zhang,
>>
>> It is not a recent regression, all of the kernels I tried back to 2.6.28
>> shows the same problem. The test results I posted last night was with
>> 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong
>> since I could not bisect that far back (I am using EXT4 and have too
>> many issues to bisect that far back).
>>
>>      
>>> please remote login the box after resume, and get the output of
>>> "xrandr --verbose".
>>>
>>>        
>> When I resume from suspend to RAM there is no problem.
>>
>> When I resume from hibernate, my laptop actually remains unusable until
>> I do the combination of things I mentioned. I cannot log in from remote
>> or even ping the laptop, except if I first press the mentioned key
>> combo. Before this, the display is either entirely blank or sometimes
>> there is a white cursor in the top left corner.
>>
>> The blank screen happens in runlevel 3 without X or "i915" loaded - I'm
>> not sure but I suppose you want the "xrandr" output for another reason.
>> It is interesting that it happens regardless of whether I am using Intel
>> integrated graphics or Mobility Radeon HD 3650 (my laptop has both and I
>> can enable one at a time). I boot the system with vga=791 and it is
>> using vesafb for console.
>>
>> I attached the output you asked for below after hibernating an Xorg
>> session, but this is from just after pressing the combo as I could not
>> log in over the network with the laptop in the blank state.
>>
>> Thanks,
>> Niel
>>
>>
>> niella@linux-7vph:>  xrandr --verbose
>> Screen 0: minimum 320 x 200, current 1600 x 1024, maximum 3840 x 1200
>> VGA disconnected 1600x1024+0+0 (0x3d) normal (normal left inverted right
>> x axis y axis) 0mm x 0mm
>>           Identifier: 0x3b
>>           Timestamp:  184631
>>           Subpixel:   unknown
>>           Clones:
>>           CRTC:       0
>>           CRTCs:      0 1
>>           Transform:  1.000000 0.000000 0.000000
>>                       0.000000 1.000000 0.000000
>>                       0.000000 0.000000 1.000000
>>                      filter:
>>     1600x1024 (0x3d)  136.4MHz *current
>>           h: width  1600 start 1704 end 1872 total 2144 skew    0 clock
>> 63.6KHz
>>           v: height 1024 start 1025 end 1028 total 1060           clock
>> 60.0Hz
>> LVDS connected 1600x1024+0+0 (0x3d) normal (normal left inverted right x
>> axis y axis) 331mm x 207mm
>>           Identifier: 0x3c
>>           Timestamp:  184631
>>           Subpixel:   horizontal rgb
>>           Clones:
>>           CRTC:       1
>>           CRTCs:      1
>>           Transform:  1.000000 0.000000 0.000000
>>                       0.000000 1.000000 0.000000
>>                       0.000000 0.000000 1.000000
>>                      filter:
>>           EDID_DATA:
>>                   00ffffffffffff0030ae554000000000
>>                   0011010380211578ea87f594574f8c27
>>                   27505400000001010101010101010101
>>                   0101010101018c41807a71b011403020
>>                   33004bcf100000197434802071b01440
>>                   302026004bcf100000190000000f00d1
>>                   0a32d10a281101004ca35532000000fe
>>                   004c544e31353455322d4c30350a0011
>>           PANEL_FITTING:  full_aspect
>>                   supported: center       full_aspect  full
>>           BACKLIGHT_CONTROL:      combination
>>                   supported: native       legacy       combination  kernel
>>           BACKLIGHT: 4722 (0x00001272)    range:  (0,4722)
>>     1600x1024 (0x3d)  136.4MHz *current +preferred
>>           h: width  1600 start 1704 end 1872 total 2144 skew    0 clock
>> 63.6KHz
>>           v: height 1024 start 1025 end 1028 total 1060           clock
>> 60.0Hz
>>     1920x1200 (0x3e)  167.8MHz -HSync -VSync +preferred
>>           h: width  1920 start 1968 end 2000 total 2298 skew    0 clock
>> 73.0KHz
>>           v: height 1200 start 1203 end 1206 total 1217           clock
>> 60.0Hz
>>     1920x1200 (0x3f)  134.3MHz -HSync -VSync
>>           h: width  1920 start 1968 end 2000 total 2208 skew    0 clock
>> 60.8KHz
>>           v: height 1200 start 1202 end 1208 total 1220           clock
>> 49.8Hz
>>     1600x1200 (0x40)  162.0MHz +HSync +VSync
>>           h: width  1600 start 1664 end 1856 total 2160 skew    0 clock
>> 75.0KHz
>>           v: height 1200 start 1201 end 1204 total 1250           clock
>> 60.0Hz
>>     1400x1050 (0x41)  122.0MHz +HSync +VSync
>>           h: width  1400 start 1488 end 1640 total 1880 skew    0 clock
>> 64.9KHz
>>           v: height 1050 start 1052 end 1064 total 1082           clock
>> 60.0Hz
>>     1280x1024 (0x42)  108.0MHz +HSync +VSync
>>           h: width  1280 start 1328 end 1440 total 1688 skew    0 clock
>> 64.0KHz
>>           v: height 1024 start 1025 end 1028 total 1066           clock
>> 60.0Hz
>>     1280x960 (0x43)  108.0MHz +HSync +VSync
>>           h: width  1280 start 1376 end 1488 total 1800 skew    0 clock
>> 60.0KHz
>>           v: height  960 start  961 end  964 total 1000           clock
>> 60.0Hz
>>     1024x768 (0x44)   65.0MHz -HSync -VSync
>>           h: width  1024 start 1048 end 1184 total 1344 skew    0 clock
>> 48.4KHz
>>           v: height  768 start  771 end  777 total  806           clock
>> 60.0Hz
>>     800x600 (0x45)   40.0MHz +HSync +VSync
>>           h: width   800 start  840 end  968 total 1056 skew    0 clock
>> 37.9KHz
>>           v: height  600 start  601 end  605 total  628           clock
>> 60.3Hz
>>     800x600 (0x46)   36.0MHz +HSync +VSync
>>           h: width   800 start  824 end  896 total 1024 skew    0 clock
>> 35.2KHz
>>           v: height  600 start  601 end  603 total  625           clock
>> 56.2Hz
>>     640x480 (0x47)   25.2MHz -HSync -VSync
>>           h: width   640 start  656 end  752 total  800 skew    0 clock
>> 31.5KHz
>>           v: height  480 start  490 end  492 total  525           clock
>> 59.9Hz
>>
>>      
>
>    

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 62490 bytes --]

Linux version 2.6.30-rc6-pae (niella@linux-7vph) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #52 SMP Sat May 23 03:12:27 SAST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007c6a1000 (usable)
 BIOS-e820: 000000007c6a1000 - 000000007c6a7000 (reserved)
 BIOS-e820: 000000007c6a7000 - 000000007c7b7000 (usable)
 BIOS-e820: 000000007c7b7000 - 000000007c80f000 (reserved)
 BIOS-e820: 000000007c80f000 - 000000007c8c7000 (usable)
 BIOS-e820: 000000007c8c7000 - 000000007c8d2000 (ACPI NVS)
 BIOS-e820: 000000007c8d2000 - 000000007c8d5000 (ACPI data)
 BIOS-e820: 000000007c8d5000 - 000000007c8d9000 (reserved)
 BIOS-e820: 000000007c8d9000 - 000000007c8dd000 (ACPI NVS)
 BIOS-e820: 000000007c8dd000 - 000000007c8e0000 (reserved)
 BIOS-e820: 000000007c8e0000 - 000000007c907000 (ACPI NVS)
 BIOS-e820: 000000007c907000 - 000000007c908000 (ACPI data)
 BIOS-e820: 000000007c908000 - 000000007cb0f000 (reserved)
 BIOS-e820: 000000007cb0f000 - 000000007cb9f000 (ACPI NVS)
 BIOS-e820: 000000007cb9f000 - 000000007cbff000 (ACPI data)
 BIOS-e820: 000000007cbff000 - 000000007cc00000 (usable)
 BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x7cc00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DBFFF uncachable
  DC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 07D000000 mask FFF000000 uncachable
  1 base 07E000000 mask FFE000000 uncachable
  2 base 000000000 mask F80000000 write-back
  3 base 07CE00000 mask FFFE00000 uncachable
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 37a36000 - 37fef772
Allocated new RAMDISK: 0050e000 - 00ac7772
Move RAMDISK from 0000000037a36000 - 0000000037fef771 to 0050e000 - 00ac7771
ACPI: RSDP 000f6490 00024 (v02 LENOVO)
ACPI: XSDT 7cb4a1df 00094 (v01 LENOVO TP-6F    00003000  LTP 00000000)
ACPI: FACP 7cb4a300 000F4 (v03 LENOVO TP-6F    00003000 LNVO 00000001)
ACPI: DSDT 7cb4a6db 0F48F (v01 LENOVO TP-6F    00003000 MSFT 03000000)
ACPI: FACS 7cb8e000 00040
ACPI: SSDT 7cb4a4b4 00227 (v01 LENOVO TP-6F    00003000 MSFT 03000000)
ACPI: ECDT 7cb59b6a 00052 (v01 LENOVO TP-6F    00003000 LNVO 00000001)
ACPI: APIC 7cb59bbc 00078 (v01 LENOVO TP-6F    00003000 LNVO 00000001)
ACPI: MCFG 7cb59c34 0003C (v01 LENOVO TP-6F    00003000 LNVO 00000001)
ACPI: HPET 7cb59c70 00038 (v01 LENOVO TP-6F    00003000 LNVO 00000001)
ACPI: SLIC 7cb59dc2 00176 (v01 LENOVO TP-6F    00003000  LTP 00000000)
ACPI: BOOT 7cb59f38 00028 (v01 LENOVO TP-6F    00003000  LTP 00000001)
ACPI: ASF! 7cb59f60 000A0 (v16 LENOVO TP-6F    00003000 PTL  00000001)
ACPI: SSDT 7cb8d213 0054F (v01 LENOVO TP-6F    00003000 INTL 20050513)
ACPI: TCPA 7c907000 00032 (v00                 00000000      00000000)
ACPI: SSDT 7c8d4000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: SSDT 7c8d3000 00274 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 7c8d2000 00242 (v01  PmRef    ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1108MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000050a558]    TEXT DATA BSS ==> [0000100000 - 000050a558]
  #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
  #5 [000050b000 - 000050d16c]              BRK ==> [000050b000 - 000050d16c]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [000050e000 - 0000ac7772]      NEW RAMDISK ==> [000050e000 - 0000ac7772]
  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f64d0] f64d0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0007cc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
    0: 0x00000000 -> 0x0000009e
    0: 0x00000100 -> 0x0007c6a1
    0: 0x0007c6a7 -> 0x0007c7b7
    0: 0x0007c80f -> 0x0007c8c7
    0: 0x0007cbff -> 0x0007cc00
On node 0 totalpages: 509960
free_area_init_node: node 0, pgdat c0428380, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3966 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2217 pages used for memmap
  HighMem zone: 280515 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f000000:61000000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages at c1fa2000, static data 21532 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 505967
Kernel command line: root=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part6 resume=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part5 splash=silent showopts vga=791
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:384
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2526.363 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0007cc00)
Memory: 2011976k/2043904k available (2071k kernel code, 27028k reserved, 1245k data, 328k init, 1130928k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff82000 - 0xfffff000   ( 500 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc0444000 - 0xc0496000   ( 328 kB)
      .data : 0xc0305fc6 - 0xc043d54c   (1245 kB)
      .text : 0xc0100000 - 0xc0305fc6   (2071 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5052.72 BogoMIPS (lpj=10105452)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5054.04 BogoMIPS (lpj=10108096)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10106.77 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
net_namespace: 1000 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf4400000-0xf47fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf4200000-0xf42fffff]
pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xfc000000-0xfc01ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfc025000-0xfc025fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc020000-0xfc023fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f]
pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf4300000-0xf4301fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf4300000-0xf43fffff]
pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf4800000-0xf4800fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf4801000-0xf48017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:15:00.2: reg 10 32bit mmio: [0xf4801800-0xf48018ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: reg 10 32bit mmio: [0xf4801c00-0xf4801cff]
pci 0000:15:00.3: supports D1 D2
pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: reg 10 32bit mmio: [0xf4802000-0xf48020ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: reg 10 32bit mmio: [0xf4802400-0xf48024ff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4800000-0xf7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7effffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11ff has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
system 00:02: ioport range 0x1680-0x169f has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xf4300000-0xf43fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
pci 0000:00:1c.3:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f40fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4:   IO window: 0x3000-0x3fff
pci 0000:00:1c.4:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000f4100000-0x000000f41fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0:   IO window: 0x004000-0x0040ff
pci 0000:15:00.0:   IO window: 0x004400-0x0044ff
pci 0000:15:00.0:   PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:15:00.0:   MEM window: 0x80000000-0x83ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0:   IO window: 0x4000-0x7fff
pci 0000:00:1e.0:   MEM window: 0xf4800000-0xf7ffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000f0000000-0x000000f3ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 1 mem: [0xf4300000-0xf43fffff]
pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
pci_bus 0000:0d: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
pci_bus 0000:15: resource 0 io:  [0x4000-0x7fff]
pci_bus 0000:15: resource 1 mem: [0xf4800000-0xf7ffffff]
pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:16: resource 0 io:  [0x4000-0x40ff]
pci_bus 0000:16: resource 1 io:  [0x4400-0x44ff]
pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 5861k freed
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1243081993.900:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1733
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 32704k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
r3964: Philips r3964 Driver $Revision: 1.10 $
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
registered taskstats version 1
Freeing unused kernel memory: 328k freed
Write protecting the kernel text: 2072k
Write protecting the kernel read-only data: 1032k
ACPI: SSDT 7c8d7c20 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7c8d5020 0087A (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset
 [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7c8d6ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 7c8d6f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset
 [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (40 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (33 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 28
ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
ata3: DUMMY
ata4: DUMMY
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
Clocksource tsc unstable (delta = -273369387 ns)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: HITACHI HTS722020K9SA00  FDE, DC4LC75A, max UDMA/133
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 t4
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72202 DC4L PQ: 0 ANSI: 5
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0x1e frozen
ata2: SError: { CommWake DevExch }
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata2.00: configured for UDMA/133
ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 t4
ata2: irq_stat 0x40000001
ata2: EH complete
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U20N  HX10 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
Driver 'sd' needs updating - please use bus_type methods
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 <<6>usb usb1: Product: EHCI Host Controller
 sda5 sda6<6>usb usb1: Manufacturer: Linux 2.6.30-rc6-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30-rc6-pae ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PM: Starting manual resume from disk
Monitor-Mwait will be used to enter C-3 state
EXT4-fs: barriers enabled
kjournald2 starting: pid 655, dev sda6:8, commit interval 5 seconds
EXT4 FS on sda6, internal journal on sda6:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda6 with ordered data mode
EXT4 (no)acl options not supported
udevd version 128 started
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Mobile IntelÂ® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
sd 0:0:0:0: Attached scsi generic sg0 type 0
iTCO_vendor_support: vendor-support=0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: WMI: Mapper loaded
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button [SLPB]
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:95:93:ec
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
cfg80211: Calling CRDA for country: US
HDA Intel 0000:00:1b.0: setting latency timer to 64
ACPI: AC Adapter [AC] (on-line)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Non-volatile memory driver v1.3
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input7
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input8
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f4801000-f48017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input10
ACPI: Battery Slot [BAT0] (battery present)
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 6FET70WW (3.00 ), EC 7VHT14WW-1.03
thinkpad_acpi: Lenovo ThinkPad W500, model 40622XG
thinkpad_acpi: radio switch found; radios are enabled
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=0 allowed=0
scsi_eh_1: flush finish cmd: f404b380
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input11
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: f404bd40
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: f3dfdec0
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=0 allowed=0
scsi_eh_1: flush finish cmd: f404bec0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: e40769c0
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
cfg80211: Regulatory domain changed to country: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
	(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: e40769c0
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
phy0: Selected rate control algorithm 'iwl-agn-rs'
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00016c00006a3b88]
usbcore: registered new interface driver snd-usb-audio
Adding 2099328k swap on /dev/sda5.  Priority:-1 extents:1 across:2099328k 
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
fuse init (API version 7.11)
platform microcode: firmware: requesting intel-ucode/06-17-06
platform microcode: firmware: requesting intel-ucode/06-17-06
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
iwlagn 0000:03:00.0: loaded firmware version 5.4.1.16
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: no IPv6 routers present
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 31 for MSI/MSI-X
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input12
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x10
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
iwlagn 0000:03:00.0: index 0 not used in uCode key table.
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: disassociating by local choice (reason=3)
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated (Reason: 1)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: disassociating by local choice (reason=3)
wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1d:92:1d:1e:8e
wlan0: authenticated
wlan0: associate with AP 00:1d:92:1d:1e:8e
wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1)
wlan0: associated
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.101 DST=202.177.16.121 LEN=58 TOS=0x00 PREC=0x00 TTL=64 ID=53182 DF PROTO=TCP SPT=33810 DPT=119 WINDOW=360 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A000604909F61AC39) 
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.101 DST=202.177.16.121 LEN=58 TOS=0x00 PREC=0x00 TTL=64 ID=53183 DF PROTO=TCP SPT=33810 DPT=119 WINDOW=360 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A00065C509F61AC39) 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: BUG: blank screen - unless keyboard/synaptic combo
  2009-05-25  6:35         ` Niel Lambrechts
@ 2009-06-01  5:08           ` Niel Lambrechts
  0 siblings, 0 replies; 6+ messages in thread
From: Niel Lambrechts @ 2009-06-01  5:08 UTC (permalink / raw)
  To: Zhang Rui; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org

Niel Lambrechts wrote:
>>>>> c's added, attached lspci output.
>>>>>
>>>>> On 05/19/2009 08:38 PM, Niel Lambrechts wrote:
>>>>>
>>>>>         
>>>>>> I have a strange problem in that during a resume from hibernate my
>>>>>> text console (or X) remains blank - that is, until I simultaneously
>>>>>> press a keyboard key and touch the synaptic pad. It is not
>>>>>> sufficient
>>>>>> to press just one or the other, it needs to be done
>>>>>> simultaneously and
>>>>>> it resumes fine after doing this.
>>>>>>
>>>>>>            
>>>> is this a regression or it exists on all the kernel you've tried?
>>>>
>>>>        
>>> Hi Zhang,
>>>
>>> It is not a recent regression, all of the kernels I tried back to
>>> 2.6.28
>>> shows the same problem. The test results I posted last night was with
>>> 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong
>>> since I could not bisect that far back (I am using EXT4 and have too
>>> many issues to bisect that far back).
>>>
>>>     
>>>> please remote login the box after resume, and get the output of
>>>> "xrandr --verbose".
>>>>
>>>>        
>>> When I resume from suspend to RAM there is no problem.
>>>
>>> When I resume from hibernate, my laptop actually remains unusable until
>>> I do the combination of things I mentioned. I cannot log in from remote
>>> or even ping the laptop, except if I first press the mentioned key
>>> combo. Before this, the display is either entirely blank or sometimes
>>> there is a white cursor in the top left corner.
>>>
>>> The blank screen happens in runlevel 3 without X or "i915" loaded - I'm
>>> not sure but I suppose you want the "xrandr" output for another reason.
>>> It is interesting that it happens regardless of whether I am using
>>> Intel
>>> integrated graphics or Mobility Radeon HD 3650 (my laptop has both
>>> and I
>>> can enable one at a time). I boot the system with vga=791 and it is
>>> using vesafb for console.
>>>
>>> I attached the output you asked for below after hibernating an Xorg
>>> session, but this is from just after pressing the combo as I could not
>>> log in over the network with the laptop in the blank state.
>>>
>>> Thanks,
>>> Niel
Hi,

I've noticed that the screen only remains blank when I specify vga=xxx
(I normally use vga=791) as a boot option, in other words when using vesafb.

The blank screen on resume after hibernate consistently does not happen
if I boot without it, and I tested with kernels from 2.6.28.

Any idea who can help with this?

Regards,
Niel

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2009-06-01  5:08 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <4A12FCB2.6090409@gmail.com>
2009-05-21 22:58 ` BUG: blank screen - unless keyboard/synaptic combo Niel Lambrechts
2009-05-22  3:39   ` Zhang Rui
2009-05-22 18:12     ` Niel Lambrechts
2009-05-25  5:58       ` Zhang Rui
2009-05-25  6:35         ` Niel Lambrechts
2009-06-01  5:08           ` Niel Lambrechts

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).