From: Alexey Starikovskiy <aystarik@gmail.com>
To: Shaohua Li <shaohua.li@intel.com>
Cc: linux-acpi@vger.kernel.org, lenb@kernel.org
Subject: Re: [PATCH 1/3] Add a generic API for _OSC
Date: Tue, 27 Oct 2009 18:52:45 +0300 [thread overview]
Message-ID: <4AE7174D.8090007@gmail.com> (raw)
In-Reply-To: <20091027063637.GA22237@sli10-desk.sh.intel.com>
Hi Shaohua,
Could you also make it take a spec string as argument, not a prepared
byte buffer?
Regards,
Alex.
Shaohua Li пишет:
> Add an API to execute _OSC. A lot of devices can have this method, so add a
> generic API.
>
> Signed-off-by: Shaohua Li <shaohua.li@intel.com>
> ---
> drivers/acpi/bus.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/acpi.h | 9 ++++++
> 2 files changed, 81 insertions(+)
>
> Index: linux/drivers/acpi/bus.c
> ===================================================================
> --- linux.orig/drivers/acpi/bus.c 2009-10-27 13:50:24.000000000 +0800
> +++ linux/drivers/acpi/bus.c 2009-10-27 14:02:30.000000000 +0800
> @@ -344,6 +344,78 @@ bool acpi_bus_can_wakeup(acpi_handle han
>
> EXPORT_SYMBOL(acpi_bus_can_wakeup);
>
> +acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context)
> +{
> + acpi_status status;
> + struct acpi_object_list input;
> + union acpi_object in_params[4];
> + union acpi_object *out_obj;
> + u32 errors;
> +
> + if (!context)
> + return AE_ERROR;
> + context->ret.length = ACPI_ALLOCATE_BUFFER;
> + context->ret.pointer = NULL;
> +
> + /* Setting up input parameters */
> + input.count = 4;
> + input.pointer = in_params;
> + in_params[0].type = ACPI_TYPE_BUFFER;
> + in_params[0].buffer.length = 16;
> + in_params[0].buffer.pointer = context->uuid;
> + in_params[1].type = ACPI_TYPE_INTEGER;
> + in_params[1].integer.value = context->rev;
> + in_params[2].type = ACPI_TYPE_INTEGER;
> + in_params[2].integer.value = context->cap.length/sizeof(u32);
> + in_params[3].type = ACPI_TYPE_BUFFER;
> + in_params[3].buffer.length = context->cap.length;
> + in_params[3].buffer.pointer = context->cap.pointer;
> +
> + status = acpi_evaluate_object(handle, "_OSC", &input, &context->ret);
> + if (ACPI_FAILURE(status))
> + return status;
> +
> + /* return buffer should have the same length as cap buffer */
> + if (context->ret.length != context->cap.length)
> + return AE_NULL_OBJECT;
> +
> + out_obj = context->ret.pointer;
> + if (out_obj->type != ACPI_TYPE_BUFFER) {
> + printk(KERN_DEBUG "_OSC evaluation returned wrong type\n");
> + status = AE_TYPE;
> + goto out_kfree;
> + }
> + /* Need to ignore the bit0 in result code */
> + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
> + if (errors) {
> + if (errors & OSC_REQUEST_ERROR)
> + printk(KERN_DEBUG "_OSC request failed\n");
> + if (errors & OSC_INVALID_UUID_ERROR)
> + printk(KERN_DEBUG "_OSC invalid UUID\n");
> + if (errors & OSC_INVALID_REVISION_ERROR)
> + printk(KERN_DEBUG "_OSC invalid revision\n");
> + if (errors & OSC_CAPABILITIES_MASK_ERROR) {
> + if (((u32 *)context->cap.pointer)[OSC_QUERY_TYPE]
> + & OSC_QUERY_ENABLE)
> + goto out_success;
> + printk(KERN_DEBUG
> + "Firmware did not grant requested _OSC control\n");
> + status = AE_SUPPORT;
> + goto out_kfree;
> + }
> + status = AE_ERROR;
> + goto out_kfree;
> + }
> +out_success:
> + return AE_OK;
> +
> +out_kfree:
> + kfree(context->ret.pointer);
> + context->ret.pointer = NULL;
> + return status;
> +}
> +EXPORT_SYMBOL(acpi_run_osc);
> +
> /* --------------------------------------------------------------------------
> Event Management
> -------------------------------------------------------------------------- */
> Index: linux/include/linux/acpi.h
> ===================================================================
> --- linux.orig/include/linux/acpi.h 2009-10-27 13:50:24.000000000 +0800
> +++ linux/include/linux/acpi.h 2009-10-27 13:50:35.000000000 +0800
> @@ -253,6 +253,13 @@ void __init acpi_old_suspend_ordering(vo
> void __init acpi_s4_no_nvs(void);
> #endif /* CONFIG_PM_SLEEP */
>
> +struct acpi_osc_context {
> + u8 *uuid;
> + int rev;
> + struct acpi_buffer cap; /* arg2/arg3 */
> + struct acpi_buffer ret; /* free by caller if success */
> +};
> +
> #define OSC_QUERY_TYPE 0
> #define OSC_SUPPORT_TYPE 1
> #define OSC_CONTROL_TYPE 2
> @@ -265,6 +272,8 @@ void __init acpi_s4_no_nvs(void);
> #define OSC_INVALID_REVISION_ERROR 8
> #define OSC_CAPABILITIES_MASK_ERROR 16
>
> +acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context);
> +
> /* _OSC DW1 Definition (OS Support Fields) */
> #define OSC_EXT_PCI_CONFIG_SUPPORT 1
> #define OSC_ACTIVE_STATE_PWR_SUPPORT 2
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-10-27 15:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-27 6:36 [PATCH 1/3] Add a generic API for _OSC Shaohua Li
2009-10-27 7:59 ` Kenji Kaneshige
2009-10-27 15:07 ` Bjorn Helgaas
2009-10-28 3:02 ` Kenji Kaneshige
2009-10-27 15:52 ` Alexey Starikovskiy [this message]
2009-10-28 2:19 ` Shaohua Li
2009-10-28 8:02 ` Alexey Starikovskiy
2009-10-28 8:47 ` Shaohua Li
2009-10-28 10:54 ` Alexey Starikovskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AE7174D.8090007@gmail.com \
--to=aystarik@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=shaohua.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox