* Re: [3.1-rc6] kmalloc(64) leak from IDE [not found] ` <20110922202337.GB32661@hostway.ca> @ 2011-09-23 7:21 ` Borislav Petkov 2011-09-23 15:58 ` Bernd Schubert 0 siblings, 1 reply; 6+ messages in thread From: Borislav Petkov @ 2011-09-23 7:21 UTC (permalink / raw) To: Simon Kirby; +Cc: linux-kernel, linux-acpi On Thu, Sep 22, 2011 at 01:23:37PM -0700, Simon Kirby wrote: > Yes, that seems to have made it stop complaining about the IDE path. Good, thanks for testing. It would be great if you left it running for a couple of days like this to see whether there aren't any other issues with the patch. I'll send it with a proper description to Dave soonish since this is a real bug. > All I see from kmemleak now is: Yep, not IDE-related. Adding linux-acpi. > unreferenced object 0xe7481a00 (size 256): > comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) > hex dump (first 32 bytes): > 00 00 00 28 ff ff ef ff 60 78 4e e7 00 02 00 00 ...(....`xN..... > 47 01 f8 0c f8 0c 01 08 00 00 00 00 0c 03 00 00 G............... > backtrace: > [<c1495c47>] kmemleak_alloc+0x27/0x50 > [<c10b3563>] __kmalloc+0xf3/0x1c0 > [<c149e0b0>] pci_acpi_scan_root+0x11e/0x272 > [<c149916b>] acpi_pci_root_add+0x163/0x256 > [<c12adddc>] acpi_device_probe+0x3a/0xf4 > [<c1302e38>] driver_probe_device+0x68/0x160 > [<c1302fb9>] __driver_attach+0x89/0x90 > [<c1302718>] bus_for_each_dev+0x48/0x70 > [<c1302cc9>] driver_attach+0x19/0x20 > [<c130213f>] bus_add_driver+0x17f/0x240 > [<c1303345>] driver_register+0x65/0x120 > [<c12af273>] acpi_bus_register_driver+0x3a/0x3f > [<c16d421f>] acpi_pci_root_init+0x1b/0x2a > [<c1001030>] do_one_initcall+0x30/0x160 > [<c16b920b>] kernel_init+0x78/0x10c > [<c14a1b76>] kernel_thread_helper+0x6/0xd > unreferenced object 0xe74e7860 (size 16): > comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) > hex dump (first 16 bytes): > 50 43 49 20 42 75 73 20 30 30 30 30 3a 30 30 00 PCI Bus 0000:00. > backtrace: > [<c1495c47>] kmemleak_alloc+0x27/0x50 > [<c10b3563>] __kmalloc+0xf3/0x1c0 > [<c1290cce>] kvasprintf+0x2e/0x50 > [<c1290d01>] kasprintf+0x11/0x20 > [<c149e0da>] pci_acpi_scan_root+0x148/0x272 > [<c149916b>] acpi_pci_root_add+0x163/0x256 > [<c12adddc>] acpi_device_probe+0x3a/0xf4 > [<c1302e38>] driver_probe_device+0x68/0x160 > [<c1302fb9>] __driver_attach+0x89/0x90 > [<c1302718>] bus_for_each_dev+0x48/0x70 > [<c1302cc9>] driver_attach+0x19/0x20 > [<c130213f>] bus_add_driver+0x17f/0x240 > [<c1303345>] driver_register+0x65/0x120 > [<c12af273>] acpi_bus_register_driver+0x3a/0x3f > [<c16d421f>] acpi_pci_root_init+0x1b/0x2a > [<c1001030>] do_one_initcall+0x30/0x160 > > ...which is probably a separate, non-recurring leak. > > > Also, I'm sure you know IDE is deprecated, so what are the chances of > > moving this box to libata? Also, can you send me your .config pls? > > Yeah, I was going to get around to that eventually. :) Config (and > earlier kmemleak output) here: http://0x.ca/sim/ref/3.1-rc6-blue/ Ok, thanks. -- Regards/Gruss, Boris. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [3.1-rc6] kmalloc(64) leak from IDE 2011-09-23 7:21 ` [3.1-rc6] kmalloc(64) leak from IDE Borislav Petkov @ 2011-09-23 15:58 ` Bernd Schubert 2011-09-23 16:08 ` Bjorn Helgaas 0 siblings, 1 reply; 6+ messages in thread From: Bernd Schubert @ 2011-09-23 15:58 UTC (permalink / raw) To: linux-kernel; +Cc: linux-acpi On 09/23/2011 09:21 AM, Borislav Petkov wrote: > On Thu, Sep 22, 2011 at 01:23:37PM -0700, Simon Kirby wrote: >> Yes, that seems to have made it stop complaining about the IDE path. > > Good, thanks for testing. It would be great if you left it running for > a couple of days like this to see whether there aren't any other issues > with the patch. I'll send it with a proper description to Dave soonish > since this is a real bug. > >> All I see from kmemleak now is: > > Yep, not IDE-related. Adding linux-acpi. > >> unreferenced object 0xe7481a00 (size 256): >> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >> hex dump (first 32 bytes): >> 00 00 00 28 ff ff ef ff 60 78 4e e7 00 02 00 00 ...(....`xN..... >> 47 01 f8 0c f8 0c 01 08 00 00 00 00 0c 03 00 00 G............... >> backtrace: >> [<c1495c47>] kmemleak_alloc+0x27/0x50 >> [<c10b3563>] __kmalloc+0xf3/0x1c0 >> [<c149e0b0>] pci_acpi_scan_root+0x11e/0x272 >> [<c149916b>] acpi_pci_root_add+0x163/0x256 >> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >> [<c1302e38>] driver_probe_device+0x68/0x160 >> [<c1302fb9>] __driver_attach+0x89/0x90 >> [<c1302718>] bus_for_each_dev+0x48/0x70 >> [<c1302cc9>] driver_attach+0x19/0x20 >> [<c130213f>] bus_add_driver+0x17f/0x240 >> [<c1303345>] driver_register+0x65/0x120 >> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >> [<c1001030>] do_one_initcall+0x30/0x160 >> [<c16b920b>] kernel_init+0x78/0x10c >> [<c14a1b76>] kernel_thread_helper+0x6/0xd >> unreferenced object 0xe74e7860 (size 16): >> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >> hex dump (first 16 bytes): >> 50 43 49 20 42 75 73 20 30 30 30 30 3a 30 30 00 PCI Bus 0000:00. >> backtrace: >> [<c1495c47>] kmemleak_alloc+0x27/0x50 >> [<c10b3563>] __kmalloc+0xf3/0x1c0 >> [<c1290cce>] kvasprintf+0x2e/0x50 >> [<c1290d01>] kasprintf+0x11/0x20 >> [<c149e0da>] pci_acpi_scan_root+0x148/0x272 >> [<c149916b>] acpi_pci_root_add+0x163/0x256 >> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >> [<c1302e38>] driver_probe_device+0x68/0x160 >> [<c1302fb9>] __driver_attach+0x89/0x90 >> [<c1302718>] bus_for_each_dev+0x48/0x70 >> [<c1302cc9>] driver_attach+0x19/0x20 >> [<c130213f>] bus_add_driver+0x17f/0x240 >> [<c1303345>] driver_register+0x65/0x120 >> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >> [<c1001030>] do_one_initcall+0x30/0x160 >> >> ...which is probably a separate, non-recurring leak. >> >>> Also, I'm sure you know IDE is deprecated, so what are the chances of >>> moving this box to libata? Also, can you send me your .config pls? >> >> Yeah, I was going to get around to that eventually. :) Config (and >> earlier kmemleak output) here: http://0x.ca/sim/ref/3.1-rc6-blue/ > > Ok, thanks. > I think I reported those already some time ago: https://lkml.org/lkml/2011/6/21/95 Cheers, Bernd ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [3.1-rc6] kmalloc(64) leak from IDE 2011-09-23 15:58 ` Bernd Schubert @ 2011-09-23 16:08 ` Bjorn Helgaas 2011-09-23 16:34 ` Bernd Schubert 0 siblings, 1 reply; 6+ messages in thread From: Bjorn Helgaas @ 2011-09-23 16:08 UTC (permalink / raw) To: Bernd Schubert; +Cc: linux-kernel, linux-acpi On Fri, Sep 23, 2011 at 9:58 AM, Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> wrote: > On 09/23/2011 09:21 AM, Borislav Petkov wrote: >> >> On Thu, Sep 22, 2011 at 01:23:37PM -0700, Simon Kirby wrote: >>> >>> Yes, that seems to have made it stop complaining about the IDE path. >> >> Good, thanks for testing. It would be great if you left it running for >> a couple of days like this to see whether there aren't any other issues >> with the patch. I'll send it with a proper description to Dave soonish >> since this is a real bug. >> >>> All I see from kmemleak now is: >> >> Yep, not IDE-related. Adding linux-acpi. > > >> >>> unreferenced object 0xe7481a00 (size 256): >>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>> hex dump (first 32 bytes): >>> 00 00 00 28 ff ff ef ff 60 78 4e e7 00 02 00 00 ...(....`xN..... >>> 47 01 f8 0c f8 0c 01 08 00 00 00 00 0c 03 00 00 G............... >>> backtrace: >>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>> [<c149e0b0>] pci_acpi_scan_root+0x11e/0x272 >>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>> [<c1302e38>] driver_probe_device+0x68/0x160 >>> [<c1302fb9>] __driver_attach+0x89/0x90 >>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>> [<c1302cc9>] driver_attach+0x19/0x20 >>> [<c130213f>] bus_add_driver+0x17f/0x240 >>> [<c1303345>] driver_register+0x65/0x120 >>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>> [<c1001030>] do_one_initcall+0x30/0x160 >>> [<c16b920b>] kernel_init+0x78/0x10c >>> [<c14a1b76>] kernel_thread_helper+0x6/0xd >>> unreferenced object 0xe74e7860 (size 16): >>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>> hex dump (first 16 bytes): >>> 50 43 49 20 42 75 73 20 30 30 30 30 3a 30 30 00 PCI Bus 0000:00. >>> backtrace: >>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>> [<c1290cce>] kvasprintf+0x2e/0x50 >>> [<c1290d01>] kasprintf+0x11/0x20 >>> [<c149e0da>] pci_acpi_scan_root+0x148/0x272 >>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>> [<c1302e38>] driver_probe_device+0x68/0x160 >>> [<c1302fb9>] __driver_attach+0x89/0x90 >>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>> [<c1302cc9>] driver_attach+0x19/0x20 >>> [<c130213f>] bus_add_driver+0x17f/0x240 >>> [<c1303345>] driver_register+0x65/0x120 >>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>> [<c1001030>] do_one_initcall+0x30/0x160 >>> >>> ...which is probably a separate, non-recurring leak. >>> >>>> Also, I'm sure you know IDE is deprecated, so what are the chances of >>>> moving this box to libata? Also, can you send me your .config pls? >>> >>> Yeah, I was going to get around to that eventually. :) Config (and >>> earlier kmemleak output) here: http://0x.ca/sim/ref/3.1-rc6-blue/ >> >> Ok, thanks. >> > > I think I reported those already some time ago: > > https://lkml.org/lkml/2011/6/21/95 Rats. And you even posted a patch (https://lkml.org/lkml/2011/6/21/132). I was cc'd, but unfortunately to an old email address that no longer works. I'll follow up on it and make sure it's fixed (probably in 3.2 since it's minor and we're so late in 3.1). Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [3.1-rc6] kmalloc(64) leak from IDE 2011-09-23 16:08 ` Bjorn Helgaas @ 2011-09-23 16:34 ` Bernd Schubert 2011-09-23 16:40 ` Bjorn Helgaas 0 siblings, 1 reply; 6+ messages in thread From: Bernd Schubert @ 2011-09-23 16:34 UTC (permalink / raw) To: Bjorn Helgaas; +Cc: linux-kernel, linux-acpi On 09/23/2011 06:08 PM, Bjorn Helgaas wrote: > On Fri, Sep 23, 2011 at 9:58 AM, Bernd Schubert > <bernd.schubert@itwm.fraunhofer.de> wrote: >> On 09/23/2011 09:21 AM, Borislav Petkov wrote: >>> >>> On Thu, Sep 22, 2011 at 01:23:37PM -0700, Simon Kirby wrote: >>>> >>>> Yes, that seems to have made it stop complaining about the IDE path. >>> >>> Good, thanks for testing. It would be great if you left it running for >>> a couple of days like this to see whether there aren't any other issues >>> with the patch. I'll send it with a proper description to Dave soonish >>> since this is a real bug. >>> >>>> All I see from kmemleak now is: >>> >>> Yep, not IDE-related. Adding linux-acpi. >> >> >>> >>>> unreferenced object 0xe7481a00 (size 256): >>>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>>> hex dump (first 32 bytes): >>>> 00 00 00 28 ff ff ef ff 60 78 4e e7 00 02 00 00 ...(....`xN..... >>>> 47 01 f8 0c f8 0c 01 08 00 00 00 00 0c 03 00 00 G............... >>>> backtrace: >>>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>>> [<c149e0b0>] pci_acpi_scan_root+0x11e/0x272 >>>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>>> [<c1302e38>] driver_probe_device+0x68/0x160 >>>> [<c1302fb9>] __driver_attach+0x89/0x90 >>>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>>> [<c1302cc9>] driver_attach+0x19/0x20 >>>> [<c130213f>] bus_add_driver+0x17f/0x240 >>>> [<c1303345>] driver_register+0x65/0x120 >>>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>>> [<c1001030>] do_one_initcall+0x30/0x160 >>>> [<c16b920b>] kernel_init+0x78/0x10c >>>> [<c14a1b76>] kernel_thread_helper+0x6/0xd >>>> unreferenced object 0xe74e7860 (size 16): >>>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>>> hex dump (first 16 bytes): >>>> 50 43 49 20 42 75 73 20 30 30 30 30 3a 30 30 00 PCI Bus 0000:00. >>>> backtrace: >>>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>>> [<c1290cce>] kvasprintf+0x2e/0x50 >>>> [<c1290d01>] kasprintf+0x11/0x20 >>>> [<c149e0da>] pci_acpi_scan_root+0x148/0x272 >>>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>>> [<c1302e38>] driver_probe_device+0x68/0x160 >>>> [<c1302fb9>] __driver_attach+0x89/0x90 >>>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>>> [<c1302cc9>] driver_attach+0x19/0x20 >>>> [<c130213f>] bus_add_driver+0x17f/0x240 >>>> [<c1303345>] driver_register+0x65/0x120 >>>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>>> [<c1001030>] do_one_initcall+0x30/0x160 >>>> >>>> ...which is probably a separate, non-recurring leak. >>>> >>>>> Also, I'm sure you know IDE is deprecated, so what are the chances of >>>>> moving this box to libata? Also, can you send me your .config pls? >>>> >>>> Yeah, I was going to get around to that eventually. :) Config (and >>>> earlier kmemleak output) here: http://0x.ca/sim/ref/3.1-rc6-blue/ >>> >>> Ok, thanks. >>> >> >> I think I reported those already some time ago: >> >> https://lkml.org/lkml/2011/6/21/95 > > Rats. And you even posted a patch > (https://lkml.org/lkml/2011/6/21/132). I was cc'd, but unfortunately > to an old email address that no longer works. I'll follow up on it > and make sure it's fixed (probably in 3.2 since it's minor and we're > so late in 3.1). Ah great, I thought you are simply too busy to look into it. We are all just changing our mail addresses too often :) Do you mind if I ping you directly once kernel.org is up again? We have a few test systems here, that fail to boot with recent kernels (just a system hard reset). The issue was introduced in between 2.6.27 and 2.6.32 and it is pci mmconfig related, probably due to a troublesome acpi bios. I filled a bugzilla some time ago and never got a responds on it. But I also need to update it with my latest finding... Thanks, Bernd ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [3.1-rc6] kmalloc(64) leak from IDE 2011-09-23 16:34 ` Bernd Schubert @ 2011-09-23 16:40 ` Bjorn Helgaas 2011-09-23 17:49 ` Bernd Schubert 0 siblings, 1 reply; 6+ messages in thread From: Bjorn Helgaas @ 2011-09-23 16:40 UTC (permalink / raw) To: Bernd Schubert; +Cc: linux-kernel, linux-acpi On Fri, Sep 23, 2011 at 10:34 AM, Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> wrote: > On 09/23/2011 06:08 PM, Bjorn Helgaas wrote: >> >> On Fri, Sep 23, 2011 at 9:58 AM, Bernd Schubert >> <bernd.schubert@itwm.fraunhofer.de> wrote: >>> >>> On 09/23/2011 09:21 AM, Borislav Petkov wrote: >>>> >>>> On Thu, Sep 22, 2011 at 01:23:37PM -0700, Simon Kirby wrote: >>>>> >>>>> Yes, that seems to have made it stop complaining about the IDE path. >>>> >>>> Good, thanks for testing. It would be great if you left it running for >>>> a couple of days like this to see whether there aren't any other issues >>>> with the patch. I'll send it with a proper description to Dave soonish >>>> since this is a real bug. >>>> >>>>> All I see from kmemleak now is: >>>> >>>> Yep, not IDE-related. Adding linux-acpi. >>> >>> >>>> >>>>> unreferenced object 0xe7481a00 (size 256): >>>>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>>>> hex dump (first 32 bytes): >>>>> 00 00 00 28 ff ff ef ff 60 78 4e e7 00 02 00 00 ...(....`xN..... >>>>> 47 01 f8 0c f8 0c 01 08 00 00 00 00 0c 03 00 00 G............... >>>>> backtrace: >>>>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>>>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>>>> [<c149e0b0>] pci_acpi_scan_root+0x11e/0x272 >>>>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>>>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>>>> [<c1302e38>] driver_probe_device+0x68/0x160 >>>>> [<c1302fb9>] __driver_attach+0x89/0x90 >>>>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>>>> [<c1302cc9>] driver_attach+0x19/0x20 >>>>> [<c130213f>] bus_add_driver+0x17f/0x240 >>>>> [<c1303345>] driver_register+0x65/0x120 >>>>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>>>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>>>> [<c1001030>] do_one_initcall+0x30/0x160 >>>>> [<c16b920b>] kernel_init+0x78/0x10c >>>>> [<c14a1b76>] kernel_thread_helper+0x6/0xd >>>>> unreferenced object 0xe74e7860 (size 16): >>>>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>>>> hex dump (first 16 bytes): >>>>> 50 43 49 20 42 75 73 20 30 30 30 30 3a 30 30 00 PCI Bus 0000:00. >>>>> backtrace: >>>>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>>>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>>>> [<c1290cce>] kvasprintf+0x2e/0x50 >>>>> [<c1290d01>] kasprintf+0x11/0x20 >>>>> [<c149e0da>] pci_acpi_scan_root+0x148/0x272 >>>>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>>>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>>>> [<c1302e38>] driver_probe_device+0x68/0x160 >>>>> [<c1302fb9>] __driver_attach+0x89/0x90 >>>>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>>>> [<c1302cc9>] driver_attach+0x19/0x20 >>>>> [<c130213f>] bus_add_driver+0x17f/0x240 >>>>> [<c1303345>] driver_register+0x65/0x120 >>>>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>>>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>>>> [<c1001030>] do_one_initcall+0x30/0x160 >>>>> >>>>> ...which is probably a separate, non-recurring leak. >>>>> >>>>>> Also, I'm sure you know IDE is deprecated, so what are the chances of >>>>>> moving this box to libata? Also, can you send me your .config pls? >>>>> >>>>> Yeah, I was going to get around to that eventually. :) Config (and >>>>> earlier kmemleak output) here: http://0x.ca/sim/ref/3.1-rc6-blue/ >>>> >>>> Ok, thanks. >>>> >>> >>> I think I reported those already some time ago: >>> >>> https://lkml.org/lkml/2011/6/21/95 >> >> Rats. And you even posted a patch >> (https://lkml.org/lkml/2011/6/21/132). I was cc'd, but unfortunately >> to an old email address that no longer works. I'll follow up on it >> and make sure it's fixed (probably in 3.2 since it's minor and we're >> so late in 3.1). > > Ah great, I thought you are simply too busy to look into it. We are all just > changing our mail addresses too often :) > > Do you mind if I ping you directly once kernel.org is up again? We have a > few test systems here, that fail to boot with recent kernels (just a system > hard reset). The issue was introduced in between 2.6.27 and 2.6.32 and it is > pci mmconfig related, probably due to a troublesome acpi bios. I filled a > bugzilla some time ago and never got a responds on it. But I also need to > update it with my latest finding... Please do, and you don't need to wait for kernel.org to come back (though it'd be good to include any bugzilla URLs if you know them). Just email me and copy linux-pci (since it seems PCI MMCONFIG-related), and we can try to make some progress. It's very important to fix regressions as quickly as possible. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [3.1-rc6] kmalloc(64) leak from IDE 2011-09-23 16:40 ` Bjorn Helgaas @ 2011-09-23 17:49 ` Bernd Schubert 0 siblings, 0 replies; 6+ messages in thread From: Bernd Schubert @ 2011-09-23 17:49 UTC (permalink / raw) To: Bjorn Helgaas, linux-kernel, linux-acpi On 09/23/2011 06:40 PM, Bjorn Helgaas wrote: > On Fri, Sep 23, 2011 at 10:34 AM, Bernd Schubert > <bernd.schubert@itwm.fraunhofer.de> wrote: >> On 09/23/2011 06:08 PM, Bjorn Helgaas wrote: >>> >>> On Fri, Sep 23, 2011 at 9:58 AM, Bernd Schubert >>> <bernd.schubert@itwm.fraunhofer.de> wrote: >>>> >>>> On 09/23/2011 09:21 AM, Borislav Petkov wrote: >>>>> >>>>> On Thu, Sep 22, 2011 at 01:23:37PM -0700, Simon Kirby wrote: >>>>>> >>>>>> Yes, that seems to have made it stop complaining about the IDE path. >>>>> >>>>> Good, thanks for testing. It would be great if you left it running for >>>>> a couple of days like this to see whether there aren't any other issues >>>>> with the patch. I'll send it with a proper description to Dave soonish >>>>> since this is a real bug. >>>>> >>>>>> All I see from kmemleak now is: >>>>> >>>>> Yep, not IDE-related. Adding linux-acpi. >>>> >>>> >>>>> >>>>>> unreferenced object 0xe7481a00 (size 256): >>>>>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>>>>> hex dump (first 32 bytes): >>>>>> 00 00 00 28 ff ff ef ff 60 78 4e e7 00 02 00 00 ...(....`xN..... >>>>>> 47 01 f8 0c f8 0c 01 08 00 00 00 00 0c 03 00 00 G............... >>>>>> backtrace: >>>>>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>>>>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>>>>> [<c149e0b0>] pci_acpi_scan_root+0x11e/0x272 >>>>>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>>>>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>>>>> [<c1302e38>] driver_probe_device+0x68/0x160 >>>>>> [<c1302fb9>] __driver_attach+0x89/0x90 >>>>>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>>>>> [<c1302cc9>] driver_attach+0x19/0x20 >>>>>> [<c130213f>] bus_add_driver+0x17f/0x240 >>>>>> [<c1303345>] driver_register+0x65/0x120 >>>>>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>>>>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>>>>> [<c1001030>] do_one_initcall+0x30/0x160 >>>>>> [<c16b920b>] kernel_init+0x78/0x10c >>>>>> [<c14a1b76>] kernel_thread_helper+0x6/0xd >>>>>> unreferenced object 0xe74e7860 (size 16): >>>>>> comm "swapper", pid 1, jiffies 4294892509 (age 515.560s) >>>>>> hex dump (first 16 bytes): >>>>>> 50 43 49 20 42 75 73 20 30 30 30 30 3a 30 30 00 PCI Bus 0000:00. >>>>>> backtrace: >>>>>> [<c1495c47>] kmemleak_alloc+0x27/0x50 >>>>>> [<c10b3563>] __kmalloc+0xf3/0x1c0 >>>>>> [<c1290cce>] kvasprintf+0x2e/0x50 >>>>>> [<c1290d01>] kasprintf+0x11/0x20 >>>>>> [<c149e0da>] pci_acpi_scan_root+0x148/0x272 >>>>>> [<c149916b>] acpi_pci_root_add+0x163/0x256 >>>>>> [<c12adddc>] acpi_device_probe+0x3a/0xf4 >>>>>> [<c1302e38>] driver_probe_device+0x68/0x160 >>>>>> [<c1302fb9>] __driver_attach+0x89/0x90 >>>>>> [<c1302718>] bus_for_each_dev+0x48/0x70 >>>>>> [<c1302cc9>] driver_attach+0x19/0x20 >>>>>> [<c130213f>] bus_add_driver+0x17f/0x240 >>>>>> [<c1303345>] driver_register+0x65/0x120 >>>>>> [<c12af273>] acpi_bus_register_driver+0x3a/0x3f >>>>>> [<c16d421f>] acpi_pci_root_init+0x1b/0x2a >>>>>> [<c1001030>] do_one_initcall+0x30/0x160 >>>>>> >>>>>> ...which is probably a separate, non-recurring leak. >>>>>> >>>>>>> Also, I'm sure you know IDE is deprecated, so what are the chances of >>>>>>> moving this box to libata? Also, can you send me your .config pls? >>>>>> >>>>>> Yeah, I was going to get around to that eventually. :) Config (and >>>>>> earlier kmemleak output) here: http://0x.ca/sim/ref/3.1-rc6-blue/ >>>>> >>>>> Ok, thanks. >>>>> >>>> >>>> I think I reported those already some time ago: >>>> >>>> https://lkml.org/lkml/2011/6/21/95 >>> >>> Rats. And you even posted a patch >>> (https://lkml.org/lkml/2011/6/21/132). I was cc'd, but unfortunately >>> to an old email address that no longer works. I'll follow up on it >>> and make sure it's fixed (probably in 3.2 since it's minor and we're >>> so late in 3.1). >> >> Ah great, I thought you are simply too busy to look into it. We are all just >> changing our mail addresses too often :) >> >> Do you mind if I ping you directly once kernel.org is up again? We have a >> few test systems here, that fail to boot with recent kernels (just a system >> hard reset). The issue was introduced in between 2.6.27 and 2.6.32 and it is >> pci mmconfig related, probably due to a troublesome acpi bios. I filled a >> bugzilla some time ago and never got a responds on it. But I also need to >> update it with my latest finding... > > Please do, and you don't need to wait for kernel.org to come back > (though it'd be good to include any bugzilla URLs if you know them). > Just email me and copy linux-pci (since it seems PCI > MMCONFIG-related), and we can try to make some progress. It's very > important to fix regressions as quickly as possible. Hmm, I tried to analyze it already and I don't have the text and attachments I sent to the bugzilla ready on my disk to send it again. So it would be really good if we could wait just a little bit longer (I posted it several months ago already). I also found some kind of workaround for us and need the systems right now for our own development... Thanks, Bernd ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-09-23 17:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20110922072643.GA27232@hostway.ca>
[not found] ` <20110922084811.GC17640@liondog.tnic>
[not found] ` <20110922202337.GB32661@hostway.ca>
2011-09-23 7:21 ` [3.1-rc6] kmalloc(64) leak from IDE Borislav Petkov
2011-09-23 15:58 ` Bernd Schubert
2011-09-23 16:08 ` Bjorn Helgaas
2011-09-23 16:34 ` Bernd Schubert
2011-09-23 16:40 ` Bjorn Helgaas
2011-09-23 17:49 ` Bernd Schubert
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox