From: Oliver Schinagl <oliver@schinagl.nl>
To: linux-acpi@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [Bug 42502] PROBLEM: USB 1.1 (and up) not working on AMD R900 Series chipset
Date: Wed, 19 Oct 2011 10:59:22 +0200 [thread overview]
Message-ID: <4E9E916A.4050007@schinagl.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 341 bytes --]
I've updated the BIOS to the latest version supplied by the manufacturer
and ran 2 new dmesges. I diffed them (stripped of timestamps) with the
original ones. It did not solve or influence USB support on a 64bit
kernel in any way. So still USB less on this specific board.
I'd update the bugreport, but the bugzilla is still offline :(
[-- Attachment #2: dmesg.64.diff --]
[-- Type: text/x-patch, Size: 29128 bytes --]
--- dmesg64.v1 2011-10-18 19:30:12.968540175 +0200
+++ dmesg64.v2 2011-10-18 19:30:22.620418836 +0200
@@ -6,18 +6,18 @@
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bd94d000 (usable)
- BIOS-e820: 00000000bd94d000 - 00000000bd99c000 (ACPI NVS)
- BIOS-e820: 00000000bd99c000 - 00000000bd9a4000 (ACPI data)
- BIOS-e820: 00000000bd9a4000 - 00000000bdadc000 (reserved)
- BIOS-e820: 00000000bdadc000 - 00000000bdaed000 (ACPI NVS)
- BIOS-e820: 00000000bdaed000 - 00000000bdb00000 (reserved)
- BIOS-e820: 00000000bdb00000 - 00000000bdb02000 (ACPI NVS)
- BIOS-e820: 00000000bdb02000 - 00000000bdb0b000 (reserved)
- BIOS-e820: 00000000bdb0b000 - 00000000bdb11000 (ACPI NVS)
- BIOS-e820: 00000000bdb11000 - 00000000bdb70000 (reserved)
- BIOS-e820: 00000000bdb70000 - 00000000bdd73000 (ACPI NVS)
- BIOS-e820: 00000000bdd73000 - 00000000bdf00000 (usable)
+ BIOS-e820: 0000000000100000 - 00000000bd94e000 (usable)
+ BIOS-e820: 00000000bd94e000 - 00000000bd99d000 (ACPI NVS)
+ BIOS-e820: 00000000bd99d000 - 00000000bd9a6000 (ACPI data)
+ BIOS-e820: 00000000bd9a6000 - 00000000bdade000 (reserved)
+ BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS)
+ BIOS-e820: 00000000bdaef000 - 00000000bdb02000 (reserved)
+ BIOS-e820: 00000000bdb02000 - 00000000bdb04000 (ACPI NVS)
+ BIOS-e820: 00000000bdb04000 - 00000000bdb0d000 (reserved)
+ BIOS-e820: 00000000bdb0d000 - 00000000bdb13000 (ACPI NVS)
+ BIOS-e820: 00000000bdb13000 - 00000000bdb75000 (reserved)
+ BIOS-e820: 00000000bdb75000 - 00000000bdd78000 (ACPI NVS)
+ BIOS-e820: 00000000bdd78000 - 00000000bdf00000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
@@ -29,7 +29,7 @@
BIOS-e820: 0000000100001000 - 0000000240000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
- DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0503 05/30/2011
+ DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0705 08/22/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
@@ -42,10 +42,10 @@
D1000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
- 0 base 000000000000 mask FFFF00000000 write-back
- 1 base 0000BDF00000 mask FFFFFFF00000 uncachable
- 2 base 0000BE000000 mask FFFFFE000000 uncachable
- 3 base 0000C0000000 mask FFFFC0000000 uncachable
+ 0 base 000000000000 mask FFFF80000000 write-back
+ 1 base 000080000000 mask FFFFC0000000 write-back
+ 2 base 0000BDF00000 mask FFFFFFF00000 uncachable
+ 3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
@@ -66,15 +66,15 @@
kernel direct mapping tables up to 240000000 @ bdeff000-bdf00000
RAMDISK: 7f738000 - 80000000
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
- ACPI: XSDT 00000000bd99c068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
- ACPI: FACP 00000000bd9a2a68 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: XSDT 00000000bd99d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: FACP 00000000bd9a4038 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557)
- ACPI: DSDT 00000000bd99c140 06924 (v02 ALASKA A M I 00000000 INTL 20051117)
- ACPI: FACS 00000000bdb0bf80 00040
- ACPI: APIC 00000000bd9a2b60 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
- ACPI: MCFG 00000000bd9a2c00 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
- ACPI: HPET 00000000bd9a2c40 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
- ACPI: SSDT 00000000bd9a2c78 00DDA (v01 AMD POWERNOW 00000001 AMD 00000001)
+ ACPI: DSDT 00000000bd99d140 06EF1 (v02 ALASKA A M I 00000000 INTL 20051117)
+ ACPI: FACS 00000000bdb0df80 00040
+ ACPI: APIC 00000000bd9a4130 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: MCFG 00000000bd9a41d0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
+ ACPI: HPET 00000000bd9a4210 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
+ ACPI: SSDT 00000000bd9a4248 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
@@ -89,15 +89,15 @@
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009d
- 0: 0x00000100 -> 0x000bd94d
- 0: 0x000bdd73 -> 0x000bdf00
+ 0: 0x00000100 -> 0x000bd94e
+ 0: 0x000bdd78 -> 0x000bdf00
0: 0x00100001 -> 0x00240000
- On node 0 totalpages: 2087526
+ On node 0 totalpages: 2087522
DMA zone: 56 pages used for memmap
DMA zone: 7 pages reserved
DMA zone: 3918 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 758546 pages, LIFO batch:31
+ DMA32 zone: 758542 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292799 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
@@ -128,16 +128,16 @@
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- PM: Registered nosave memory: 00000000bd94d000 - 00000000bd99c000
- PM: Registered nosave memory: 00000000bd99c000 - 00000000bd9a4000
- PM: Registered nosave memory: 00000000bd9a4000 - 00000000bdadc000
- PM: Registered nosave memory: 00000000bdadc000 - 00000000bdaed000
- PM: Registered nosave memory: 00000000bdaed000 - 00000000bdb00000
- PM: Registered nosave memory: 00000000bdb00000 - 00000000bdb02000
- PM: Registered nosave memory: 00000000bdb02000 - 00000000bdb0b000
- PM: Registered nosave memory: 00000000bdb0b000 - 00000000bdb11000
- PM: Registered nosave memory: 00000000bdb11000 - 00000000bdb70000
- PM: Registered nosave memory: 00000000bdb70000 - 00000000bdd73000
+ PM: Registered nosave memory: 00000000bd94e000 - 00000000bd99d000
+ PM: Registered nosave memory: 00000000bd99d000 - 00000000bd9a6000
+ PM: Registered nosave memory: 00000000bd9a6000 - 00000000bdade000
+ PM: Registered nosave memory: 00000000bdade000 - 00000000bdaef000
+ PM: Registered nosave memory: 00000000bdaef000 - 00000000bdb02000
+ PM: Registered nosave memory: 00000000bdb02000 - 00000000bdb04000
+ PM: Registered nosave memory: 00000000bdb04000 - 00000000bdb0d000
+ PM: Registered nosave memory: 00000000bdb0d000 - 00000000bdb13000
+ PM: Registered nosave memory: 00000000bdb13000 - 00000000bdb75000
+ PM: Registered nosave memory: 00000000bdb75000 - 00000000bdd78000
PM: Registered nosave memory: 00000000bdf00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
@@ -161,14 +161,14 @@
PERCPU: Embedded 28 pages/cpu @ffff8800bd600000 s84416 r8192 d22080 u262144
pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055263
+ Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055259
Policy zone: Normal
Kernel command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/64bit/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/64bit/linux
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ f8000000 size 64 MB
- Memory: 8145952k/9437184k available (5940k kernel code, 1087080k absent, 204152k reserved, 5017k data, 956k init)
+ Memory: 8145936k/9437184k available (5940k kernel code, 1087096k absent, 204152k reserved, 5017k data, 956k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
@@ -181,8 +181,8 @@
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
- Detected 3211.088 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.17 BogoMIPS (lpj=32110880)
+ Detected 3211.052 MHz processor.
+ Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.10 BogoMIPS (lpj=32110520)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
@@ -227,12 +227,12 @@
Switch to broadcast mode on CPU4
#5
Brought up 6 CPUs
- Total of 6 processors activated (38530.17 BogoMIPS).
+ Total of 6 processors activated (38530.08 BogoMIPS).
Switch to broadcast mode on CPU5
Switch to broadcast mode on CPU0
devtmpfs: initialized
print_constraints: dummy:
- Time: 23:05:30 Date: 09/07/11
+ Time: 15:04:26 Date: 10/16/11
NET: Registered protocol family 16
node 0 link 0: io port [d000, ffff]
TOM: 00000000c0000000 aka 3072M
@@ -245,15 +245,18 @@
bus: 00 index 2 [mem 0xf0000000-0xffffffff]
bus: 00 index 3 [mem 0x240000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
- Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
+ Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
+ mtrr: your CPUs had inconsistent fixed MTRR settings
+ mtrr: probably your BIOS does not setup all CPUs.
+ mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
- ACPI: Executed 3 blocks of module-level executable AML code
+ ACPI: Executed 2 blocks of module-level executable AML code
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349)
ACPI: Interpreter enabled
@@ -261,8 +264,8 @@
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
Freeing initrd memory: 8992k freed
+ ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
@@ -341,15 +344,15 @@
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
- pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
+ pci 0000:02:00.0: reg 18: [mem 0xd4004000-0xd4004fff 64bit pref]
+ pci 0000:02:00.0: reg 20: [mem 0xd4000000-0xd4003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
@@ -358,10 +361,12 @@
pci 0000:00:07.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:04:05.0: [4444:0016] type 0 class 0x000400
+ pci 0000:04:05.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
@@ -394,7 +399,7 @@
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
- reserve RAM buffer: 00000000bd94d000 - 00000000bfffffff
+ reserve RAM buffer: 00000000bd94e000 - 00000000bfffffff
reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
@@ -404,6 +409,12 @@
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
+ Switched to NOHz mode on CPU #5
+ Switched to NOHz mode on CPU #0
+ Switched to NOHz mode on CPU #4
+ Switched to NOHz mode on CPU #1
+ Switched to NOHz mode on CPU #2
+ Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
@@ -414,14 +425,8 @@
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
- Switched to NOHz mode on CPU #0
- Switched to NOHz mode on CPU #5
pnp 00:00: [mem 0xc0000000-0xffffffff window]
- Switched to NOHz mode on CPU #1
pnp 00:00: [mem 0x00000000 window]
- Switched to NOHz mode on CPU #3
- Switched to NOHz mode on CPU #4
- Switched to NOHz mode on CPU #2
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
@@ -546,7 +551,7 @@
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem disabled]
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
@@ -554,7 +559,7 @@
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
- pci 0000:00:14.4: bridge window [mem pref disabled]
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
@@ -572,8 +577,9 @@
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
+ pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
@@ -599,7 +605,7 @@
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
- type=2000 audit(1315436729.210:1): initialized
+ type=2000 audit(1318777524.880:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
@@ -641,23 +647,23 @@
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
- ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
- ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
+ ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
- ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
- ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
+ ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
@@ -668,10 +674,10 @@
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
+ ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
@@ -680,21 +686,21 @@
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
- ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
- ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
+ ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
- Refined TSC clocksource calibration: 3210.781 MHz.
- Switching to clocksource tsc
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
+ Refined TSC clocksource calibration: 3210.779 MHz.
+ Switching to clocksource tsc
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
@@ -715,8 +721,8 @@
powernow-k8: 3 : pstate 3 (800 MHz)
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
- Magic number: 11:497:99
- rtc_cmos 00:05: setting system clock to 2011-09-07 23:05:31 UTC (1315436731)
+ Magic number: 15:330:83
+ rtc_cmos 00:05: setting system clock to 2011-10-16 15:05:26 UTC (1318777526)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 956k freed
@@ -733,28 +739,6 @@
vga16fb: mapped to 0xffff8800000a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
- usb 3-1: new high speed USB device using ehci_hcd and address 2
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: new high speed USB device using ehci_hcd and address 3
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: new high speed USB device using ehci_hcd and address 4
- usb 3-1: device not accepting address 4, error -32
- usb 3-1: new high speed USB device using ehci_hcd and address 5
- usb 3-1: device not accepting address 5, error -32
- hub 3-0:1.0: unable to enumerate USB device on port 1
- usb 7-1: new full speed USB device using ohci_hcd and address 2
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: new full speed USB device using ohci_hcd and address 3
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: new full speed USB device using ohci_hcd and address 4
- usb 7-1: device not accepting address 4, error -32
- usb 7-1: new full speed USB device using ohci_hcd and address 5
- usb 7-1: device not accepting address 5, error -32
- hub 7-0:1.0: unable to enumerate USB device on port 1
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
@@ -772,12 +756,18 @@
r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:02:00.0: irq 72 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72
+ r8169 0000:02:00.0: PCI INT A disabled
+ r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+ r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
+ r8169 0000:02:00.0: setting latency timer to 64
+ r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
+ r8169 0000:02:00.0: irq 72 for MSI/MSI-X
+ r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- usbcore: deregistering interface driver usb-storage
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
@@ -797,13 +787,11 @@
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+ ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
- ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+ ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
@@ -811,6 +799,8 @@
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
+ ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
@@ -818,24 +808,10 @@
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- ata5.00: ATA-7: HDS725050KLA360, K2AOAH0A, max UDMA/133
- ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata5.00: configured for UDMA/133
- scsi 4:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5
- sd 4:0:0:0: Attached scsi generic sg2 type 0
- sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 4:0:0:0: [sdc] Write Protect is off
- sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
sd 1:0:0:0: [sdb] Attached SCSI disk
- sdc: sdc1 sdc2 sdc4
- sd 4:0:0:0: [sdc] Attached SCSI disk
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
NTFS driver 2.1.30 [Flags: R/O MODULE].
Btrfs loaded
JFS: nTxBlock = 8192, nTxLock = 65536
@@ -883,12 +859,6 @@
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
@@ -904,14 +874,28 @@
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts:
-
-
+ EXT3-fs (md126): error: couldn't mount because of unsupported optional features (240)
+ EXT2-fs (md126): error: couldn't mount because of unsupported optional features (240)
+ EXT4-fs (md126): mounted filesystem with ordered data mode. Opts:
+ usb 3-2: new high speed USB device using ehci_hcd and address 2
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: new high speed USB device using ehci_hcd and address 3
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: new high speed USB device using ehci_hcd and address 4
+ usb 3-2: device not accepting address 4, error -32
+ usb 3-2: new high speed USB device using ehci_hcd and address 5
+ usb 3-2: device not accepting address 5, error -32
+ hub 3-0:1.0: unable to enumerate USB device on port 2
+ usb 7-2: new full speed USB device using ohci_hcd and address 2
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: new full speed USB device using ohci_hcd and address 3
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: new full speed USB device using ohci_hcd and address 4
+ usb 7-2: device not accepting address 4, error -32
+ usb 7-2: new full speed USB device using ohci_hcd and address 5
+ usb 7-2: device not accepting address 5, error -32
+ hub 7-0:1.0: unable to enumerate USB device on port 2
[-- Attachment #3: dmesg.32.diff --]
[-- Type: text/x-patch, Size: 37984 bytes --]
--- dmesg_32.v2 2011-10-19 10:22:14.284864445 +0200
+++ dmesg_32.v1 2011-10-19 10:21:55.828850426 +0200
@@ -1,22 +1,22 @@
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
- Linux version 2.6.38-11-generic-pae (buildd@rothera) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 (Ubuntu 2.6.38-11.48-generic-pae 2.6.38.8)
+ Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bd94d000 (usable)
- BIOS-e820: 00000000bd94d000 - 00000000bd99c000 (ACPI NVS)
- BIOS-e820: 00000000bd99c000 - 00000000bd9a4000 (ACPI data)
- BIOS-e820: 00000000bd9a4000 - 00000000bdadc000 (reserved)
- BIOS-e820: 00000000bdadc000 - 00000000bdaed000 (ACPI NVS)
- BIOS-e820: 00000000bdaed000 - 00000000bdb00000 (reserved)
- BIOS-e820: 00000000bdb00000 - 00000000bdb02000 (ACPI NVS)
- BIOS-e820: 00000000bdb02000 - 00000000bdb0b000 (reserved)
- BIOS-e820: 00000000bdb0b000 - 00000000bdb11000 (ACPI NVS)
- BIOS-e820: 00000000bdb11000 - 00000000bdb70000 (reserved)
- BIOS-e820: 00000000bdb70000 - 00000000bdd73000 (ACPI NVS)
- BIOS-e820: 00000000bdd73000 - 00000000bdf00000 (usable)
+ BIOS-e820: 0000000000100000 - 00000000bd94e000 (usable)
+ BIOS-e820: 00000000bd94e000 - 00000000bd99d000 (ACPI NVS)
+ BIOS-e820: 00000000bd99d000 - 00000000bd9a6000 (ACPI data)
+ BIOS-e820: 00000000bd9a6000 - 00000000bdade000 (reserved)
+ BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS)
+ BIOS-e820: 00000000bdaef000 - 00000000bdb02000 (reserved)
+ BIOS-e820: 00000000bdb02000 - 00000000bdb04000 (ACPI NVS)
+ BIOS-e820: 00000000bdb04000 - 00000000bdb0d000 (reserved)
+ BIOS-e820: 00000000bdb0d000 - 00000000bdb13000 (ACPI NVS)
+ BIOS-e820: 00000000bdb13000 - 00000000bdb75000 (reserved)
+ BIOS-e820: 00000000bdb75000 - 00000000bdd78000 (ACPI NVS)
+ BIOS-e820: 00000000bdd78000 - 00000000bdf00000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
@@ -26,12 +26,13 @@
BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100001000 - 0000000240000000 (usable)
- NX (Execute Disable) protection: active
+ Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
+ NX (Execute Disable) protection: approximated by x86 segment limits
DMI 2.7 present.
- DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0503 05/30/2011
+ DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0705 08/22/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x240000 max_arch_pfn = 0x1000000
+ last_pfn = 0xbdf00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
@@ -40,10 +41,10 @@
D1000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
- 0 base 000000000000 mask FFFF00000000 write-back
- 1 base 0000BDF00000 mask FFFFFFF00000 uncachable
- 2 base 0000BE000000 mask FFFFFE000000 uncachable
- 3 base 0000C0000000 mask FFFFC0000000 uncachable
+ 0 base 000000000000 mask FFFF80000000 write-back
+ 1 base 000080000000 mask FFFFC0000000 write-back
+ 2 base 0000BDF00000 mask FFFFFFF00000 uncachable
+ 3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
@@ -51,47 +52,48 @@
TOM2: 0000000240000000 aka 9216M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bdf00000 - 0000000100000000 (usable) ==> (reserved)
- initial memory mapped : 0 - 01e00000
- init_memory_mapping: 0000000000000000-0000000037bfe000
- 0000000000 - 0000200000 page 4k
- 0000200000 - 0037a00000 page 2M
- 0037a00000 - 0037bfe000 page 4k
- kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000
- RAMDISK: 366c6000 - 3735b000
+ initial memory mapped : 0 - 01c00000
+ init_memory_mapping: 0000000000000000-00000000377fe000
+ 0000000000 - 0000400000 page 4k
+ 0000400000 - 0037400000 page 2M
+ 0037400000 - 00377fe000 page 4k
+ kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
+ RAMDISK: 7f862000 - 80000000
+ Allocated new RAMDISK: 37060000 - 377fdfc7
+ Move RAMDISK from 000000007f862000 - 000000007fffffc6 to 37060000 - 377fdfc6
ACPI: RSDP 000f0450 00024 (v02 ALASKA)
- ACPI: XSDT bd99c068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
- ACPI: FACP bd9a2a68 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: XSDT bd99d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: FACP bd9a4038 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557)
- ACPI: DSDT bd99c140 06924 (v02 ALASKA A M I 00000000 INTL 20051117)
- ACPI: FACS bdb0bf80 00040
- ACPI: APIC bd9a2b60 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
- ACPI: MCFG bd9a2c00 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
- ACPI: HPET bd9a2c40 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
- ACPI: SSDT bd9a2c78 00DDA (v01 AMD POWERNOW 00000001 AMD 00000001)
+ ACPI: DSDT bd99d140 06EF1 (v02 ALASKA A M I 00000000 INTL 20051117)
+ ACPI: FACS bdb0df80 00040
+ ACPI: APIC bd9a4130 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: MCFG bd9a41d0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
+ ACPI: HPET bd9a4210 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
+ ACPI: SSDT bd9a4248 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
- 8324MB HIGHMEM available.
- 891MB LOWMEM available.
- mapped low ram: 0 - 37bfe000
- low ram: 0 - 37bfe000
+ 2151MB HIGHMEM available.
+ 887MB LOWMEM available.
+ mapped low ram: 0 - 377fe000
+ low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x00037bfe
- HighMem 0x00037bfe -> 0x00240000
+ Normal 0x00001000 -> 0x000377fe
+ HighMem 0x000377fe -> 0x000bdf00
Movable zone start PFN for each node
- early_node_map[4] active PFN ranges
+ early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
- 0: 0x00000100 -> 0x000bd94d
- 0: 0x000bdd73 -> 0x000bdf00
- 0: 0x00100001 -> 0x00240000
- On node 0 totalpages: 2087526
- free_area_init_node: node 0, pgdat c17bac40, node_mem_map f1ec6200
+ 0: 0x00000100 -> 0x000bd94e
+ 0: 0x000bdd78 -> 0x000bdf00
+ On node 0 totalpages: 776803
+ free_area_init_node: node 0, pgdat c1784100, node_mem_map f589f200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
- Normal zone: 1752 pages used for memmap
- Normal zone: 222502 pages, LIFO batch:31
- HighMem zone: 16649 pages used for memmap
- HighMem zone: 1842642 pages, LIFO batch:31
+ Normal zone: 1744 pages used for memmap
+ Normal zone: 221486 pages, LIFO batch:31
+ HighMem zone: 4303 pages used for memmap
+ HighMem zone: 545289 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
@@ -124,43 +126,41 @@
Allocating PCI resources starting at bdf00000 (gap: bdf00000:3a100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u262144
- pcpu-alloc: s32320 r0 d20928 u262144 alloc=1*2097152
+ PERCPU: Embedded 13 pages/cpu @f5400000 s28800 r0 d24448 u524288
+ pcpu-alloc: s28800 r0 d24448 u524288 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2069093
- Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic-pae root=UUID=6d351741-09db-4c02-8a37-6d7910d9d4da ro quiet splash vt.handoff=7
+ Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770724
+ Kernel command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/linux
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
- allocated 47185600 bytes of page_cgroup
+ allocated 15559360 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Initializing HighMem for node 0 (00037bfe:00240000)
- Memory: 8206480k/9437184k available (5351k kernel code, 143624k reserved, 2597k data, 720k init, 7437164k highmem)
+ Initializing HighMem for node 0 (000377fe:000bdf00)
+ Memory: 3049236k/3111936k available (5188k kernel code, 57976k reserved, 2540k data, 700k init, 2198368k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- .init : 0xc17c4000 - 0xc1878000 ( 720 kB)
- .data : 0xc1539e95 - 0xc17c35c0 (2597 kB)
- .text : 0xc1000000 - 0xc1539e95 (5351 kB)
+ pkmap : 0xff800000 - 0xffc00000 (4096 kB)
+ vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
+ lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
+ .init : 0xc178d000 - 0xc183c000 ( 700 kB)
+ .data : 0xc15112a1 - 0xc178c480 (2540 kB)
+ .text : 0xc1000000 - 0xc15112a1 (5188 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304 nr_irqs:1288 16
- CPU 0 irqstacks, hard=f740a000 soft=f740c000
+ CPU 0 irqstacks, hard=f400a000 soft=f400c000
Extended CMOS year: 2000
- spurious 8259A interrupt: IRQ7.
- vt handoff: transparent VT on vt#7
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
- Detected 3210.863 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.72 BogoMIPS (lpj=12843452)
+ Detected 3210.741 MHz processor.
+ Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.48 BogoMIPS (lpj=12842964)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
@@ -179,7 +179,7 @@
mce: CPU supports 6 MCE banks
using C1E aware idle routine
ACPI: Core revision 20110112
- ftrace: allocating 24259 entries in 48 pages
+ ftrace: allocating 23640 entries in 47 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
@@ -191,33 +191,33 @@
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
- CPU 1 irqstacks, hard=f74ae000 soft=f74b8000
+ CPU 1 irqstacks, hard=f40ae000 soft=f40b8000
Booting Node 0, Processors #1
Initializing CPU#1
System has AMD C1E enabled
Switch to broadcast mode on CPU1
- CPU 2 irqstacks, hard=f74e2000 soft=f74e4000
+ CPU 2 irqstacks, hard=f40e2000 soft=f40e4000
#2
Initializing CPU#2
Switch to broadcast mode on CPU2
- CPU 3 irqstacks, hard=f74ee000 soft=f74f0000
+ CPU 3 irqstacks, hard=f40ee000 soft=f40f0000
#3
Initializing CPU#3
Switch to broadcast mode on CPU3
- CPU 4 irqstacks, hard=f7506000 soft=f7508000
+ CPU 4 irqstacks, hard=f4106000 soft=f4108000
#4
Initializing CPU#4
Switch to broadcast mode on CPU4
- CPU 5 irqstacks, hard=f7526000 soft=f7528000
+ CPU 5 irqstacks, hard=f4126000 soft=f4128000
#5
Initializing CPU#5
Brought up 6 CPUs
- Total of 6 processors activated (38529.53 BogoMIPS).
+ Total of 6 processors activated (38529.97 BogoMIPS).
Switch to broadcast mode on CPU5
Switch to broadcast mode on CPU0
devtmpfs: initialized
print_constraints: dummy:
- Time: 22:52:03 Date: 09/07/11
+ Time: 14:56:27 Date: 10/16/11
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [d000, ffff]
@@ -229,7 +229,6 @@
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xc0000000-0xdfffffff]
bus: 00 index 2 [mem 0xf0000000-0xffffffff]
- bus: 00 index 3 [mem 0x240000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
@@ -237,9 +236,12 @@
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
+ mtrr: your CPUs had inconsistent fixed MTRR settings
+ mtrr: probably your BIOS does not setup all CPUs.
+ mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
- ACPI: Executed 3 blocks of module-level executable AML code
+ ACPI: Executed 2 blocks of module-level executable AML code
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349)
ACPI: Interpreter enabled
@@ -327,27 +329,30 @@
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
- pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
+ pci 0000:02:00.0: reg 18: [mem 0xd4004000-0xd4004fff 64bit pref]
+ pci 0000:02:00.0: reg 20: [mem 0xd4000000-0xd4003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
+ Freeing initrd memory: 7800k freed
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:04:05.0: [4444:0016] type 0 class 0x000400
+ pci 0000:04:05.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
@@ -381,7 +386,7 @@
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
- reserve RAM buffer: 00000000bd94d000 - 00000000bfffffff
+ reserve RAM buffer: 00000000bd94e000 - 00000000bfffffff
reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
@@ -390,12 +395,12 @@
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
- Switched to NOHz mode on CPU #1
- Switched to NOHz mode on CPU #3
- Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #5
- Switched to NOHz mode on CPU #0
+ Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #4
+ Switched to NOHz mode on CPU #0
+ Switched to NOHz mode on CPU #3
+ Switched to NOHz mode on CPU #1
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
@@ -427,7 +432,7 @@
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
- pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
+ pnp 00:02: [io 0x0000-0xffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
@@ -468,9 +473,9 @@
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
+ pnp 00:03: [io 0x0000-0xffffffff disabled]
pnp 00:03: [io 0x0290-0x02af]
- pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
+ pnp 00:03: [io 0x0000-0xffffffff disabled]
system 00:03: [io 0x0290-0x02af] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
@@ -516,9 +521,9 @@
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
+ pnp 00:0d: [mem 0x00000000-0xffffffff disabled]
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
+ pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
pnp 00:0e: [mem 0xfec20000-0xfec200ff]
system 00:0e: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
@@ -534,7 +539,7 @@
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem disabled]
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
@@ -542,7 +547,7 @@
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
- pci 0000:00:14.4: bridge window [mem pref disabled]
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
@@ -560,8 +565,9 @@
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
+ pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
@@ -578,18 +584,17 @@
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
- Freeing initrd memory: 12884k freed
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
cpufreq-nforce2: No nForce2 chipset.
audit: initializing netlink socket (disabled)
- type=2000 audit(1315435924.524:1): initialized
+ type=2000 audit(1318777072.293:1): initialized
highmem bounce pool size: 64 pages
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
+ HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.16)
- msgmni has been set to 1527
+ msgmni has been set to 1677
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
@@ -628,23 +633,23 @@
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
- ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
- ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
+ ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
- ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
- ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
+ ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
@@ -655,10 +660,10 @@
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
+ ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
@@ -667,10 +672,10 @@
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
- ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
- ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
+ ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
@@ -711,230 +716,49 @@
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
- Magic number: 11:218:906
- rtc_cmos 00:05: setting system clock to 2011-09-07 22:52:05 UTC (1315435925)
+ Magic number: 15:601:940
+ rtc_cmos 00:05: setting system clock to 2011-10-16 14:57:54 UTC (1318777074)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
- Freeing unused kernel memory: 720k freed
- Write protecting the kernel text: 5352k
- Write protecting the kernel read-only data: 2192k
- NX-protecting the kernel data: 4888k
- <30>udev[76]: starting version 167
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- md: linear personality registered for level -1
- md: multipath personality registered for level -4
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- xhci_hcd 0000:03:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
- xhci_hcd 0000:03:00.0: setting latency timer to 64
- xhci_hcd 0000:03:00.0: xHCI Host Controller
- xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
- async_tx: api initialized (async)
- xor: automatically using best checksumming function: pIII_sse
+ Freeing unused kernel memory: 700k freed
+ Write protecting the kernel text: 5192k
+ Write protecting the kernel read-only data: 2148k
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:02:00.0: irq 72 for MSI/MSI-X
- r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8438000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72
- ahci 0000:00:11.0: version 3.0
- ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
- ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
- ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
- ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
- ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
- ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
- pIII_sse : 12815.000 MB/sec
- xor: using function: pIII_sse (12815.000 MB/sec)
- usb 3-2: new high speed USB device using ehci_hcd and address 2
- xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe900000
- xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 79 for MSI/MSI-X
- usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
- xHCI xhci_add_endpoint called for root hub
- xHCI xhci_check_bandwidth called for root hub
- hub 8-0:1.0: USB hub found
- hub 8-0:1.0: 4 ports detected
- Refined TSC clocksource calibration: 3210.781 MHz.
+ input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
+ r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf800e000, 14:da:e9:03:e9:b7, XID 0c900880 IRQ 72
+ Refined TSC clocksource calibration: 3210.793 MHz.
Switching to clocksource tsc
- usbcore: registered new interface driver uas
- ata6: SATA link down (SStatus 0 SControl 300)
- ata4: SATA link down (SStatus 0 SControl 300)
- ata3: SATA link down (SStatus 0 SControl 300)
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata5.00: ATA-7: HDS725050KLA360, K2AOAH0A, max UDMA/133
- ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata5.00: configured for UDMA/133
- ata1.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
- ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
- ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- ata2.00: configured for UDMA/133
- scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
- sd 1:0:0:0: [sdb] Write Protect is off
- sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- scsi 4:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5
- sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 4:0:0:0: Attached scsi generic sg2 type 0
- sd 4:0:0:0: [sdc] Write Protect is off
- sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
- sd 0:0:0:0: [sda] Attached SCSI disk
- sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
- sd 1:0:0:0: [sdb] Attached SCSI disk
- sdc: sdc1 sdc2 sdc4
- sd 4:0:0:0: [sdc] Attached SCSI disk
+ vga16fb: initializing
+ vga16fb: mapped to 0xc00a0000
+ Console: switching to colour frame buffer device 80x30
+ fb0: VGA16 VGA frame buffer device
Initializing USB Mass Storage driver...
- scsi6 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
- raid6: int32x1 1564 MB/s
- md: bind<sdb3>
- md: bind<sdb4>
- md: bind<sdb5>
- raid6: int32x2 1621 MB/s
- md: bind<sdb6>
- raid6: int32x4 1233 MB/s
- raid6: int32x8 954 MB/s
- raid6: mmxx1 2958 MB/s
- raid6: mmxx2 5559 MB/s
- raid6: sse1x1 2490 MB/s
- raid6: sse1x2 3934 MB/s
- raid6: sse2x1 4696 MB/s
- raid6: sse2x2 7811 MB/s
- raid6: using algorithm sse2x2 (7811 MB/s)
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- md: raid10 personality registered for level 10
- md: bind<sda6>
- bio: create slab <bio-1> at 1
- md/raid10:md124: active with 2 out of 2 devices
- md124: detected capacity change from 0 to 233556410368
- md124: unknown partition table
- EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- md: bind<sda4>
- md/raid10:md126: active with 2 out of 2 devices
- md126: detected capacity change from 0 to 17453285376
- md: bind<sda5>
- md: md123 stopped.
- md: unbind<sda5>
- md: export_rdev(sda5)
- md: array md127 already has disks!
- scsi 6:0:0:0: Direct-Access WG Corner Office 8.02 PQ: 0 ANSI: 0 CCS
- sd 6:0:0:0: Attached scsi generic sg3 type 0
- sd 6:0:0:0: [sdd] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
- sd 6:0:0:0: [sdd] Write Protect is off
- sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 08
- sd 6:0:0:0: [sdd] Assuming drive cache: write through
- sd 6:0:0:0: [sdd] Assuming drive cache: write through
- sdd: sdd1
- sd 6:0:0:0: [sdd] Assuming drive cache: write through
- sd 6:0:0:0: [sdd] Attached SCSI removable disk
- <30>udev[376]: starting version 167
- <30>udev[392]: renamed network interface eth0 to eth2
- md126: unknown partition table
- Adding 4000180k swap on /dev/sdc4. Priority:-1 extents:1 across:4000180k
- type=1400 audit(1315435938.465:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=523 comm="apparmor_parser"
- type=1400 audit(1315435938.465:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=532 comm="apparmor_parser"
- type=1400 audit(1315435938.465:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser"
- type=1400 audit(1315435938.465:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
- type=1400 audit(1315435938.465:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser"
- type=1400 audit(1315435938.465:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser"
- md: bind<sda5>
- md/raid10:md125: active with 2 out of 2 devices
- md125: detected capacity change from 0 to 34907881472
- md125: unknown partition table
- md: bind<sda3>
- md/raid1:md127: active with 2 out of 2 mirrors
- md127: detected capacity change from 0 to 1090453504
- md127: unknown partition table
- lp: driver loaded but no devices found
- piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
- SP5100 TCO timer: mmio address 0xbafe00 already in use
- input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
- fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- Disabling lock debugging due to kernel taint
- [fglrx] Maximum main memory to use for locked dma buffers: 3769 MBytes.
- [fglrx] vendor: 1002 device: 6758 count: 1
- [fglrx] ioport: bar 4, base 0xe000, size: 0x100
- pci 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
- pci 0000:01:00.0: setting latency timer to 64
- [fglrx] Kernel PAT support is enabled
- [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
- HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- hda-intel: Enable sync_write for AMD chipset
- hda_codec: ALC887-VD: BIOS auto-probing.
- input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
- HDA Intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
- HDA Intel 0000:01:00.1: irq 80 for MSI/MSI-X
- HDA Intel 0000:01:00.1: setting latency timer to 64
- hda-intel: Enable sync_write for AMD chipset
- EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
- input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
- type=1400 audit(1315435941.709:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1005 comm="apparmor_parser"
- type=1400 audit(1315435941.709:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1010 comm="apparmor_parser"
- type=1400 audit(1315435941.709:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1010 comm="apparmor_parser"
- type=1400 audit(1315435941.709:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1009 comm="apparmor_parser"
- r8169 0000:02:00.0: eth2: link down
- r8169 0000:02:00.0: eth2: link down
- ADDRCONF(NETDEV_UP): eth2: link is not ready
- ppdev: user-space parallel port driver
- fglrx_pci 0000:01:00.0: irq 81 for MSI/MSI-X
- [fglrx] Firegl kernel thread PID: 1375
- [fglrx] Firegl kernel thread PID: 1376
- [fglrx] Firegl kernel thread PID: 1377
- [fglrx] IRQ 81 Enabled
- [fglrx] Gart USWC size:1280 M.
- [fglrx] Gart cacheable size:508 M.
- [fglrx] Reserved FB block: Shared offset:0, size:1000000
- [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
- [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
- EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
- EXT4-fs (sdc2): re-mounted. Opts: commit=0
- r8169 0000:02:00.0: eth2: link up
- ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
- hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
- EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
- EXT4-fs (sdc2): re-mounted. Opts: commit=0
- eth2: no IPv6 routers present
- usb 3-2: USB disconnect, address 2
- usb 4-1: new full speed USB device using ohci_hcd and address 2
- input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input6
- generic-usb 0003:1532:0101.0001: input,hidraw0: USB HID v10.01 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input0
- input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input7
- generic-usb 0003:1532:0101.0002: input,hidraw1: USB HID v10.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input1
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
-
-
-
+ Intel ISA PCIC probe: not found.
+ r8169 0000:02:00.0: eth0: link down
+ r8169 0000:02:00.0: eth0: link down
+ ADDRCONF(NETDEV_UP): eth0: link is not ready
+ r8169 0000:02:00.0: eth0: link down
+ ADDRCONF(NETDEV_UP): eth0: link is not ready
+ r8169 0000:02:00.0: eth0: link up
+ ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+ usb 3-2: new high speed USB device using ehci_hcd and address 2
+ scsi0 : usb-storage 3-2:1.0
+ scsi 0:0:0:0: Direct-Access Ut163 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
+ sd 0:0:0:0: Attached scsi generic sg0 type 0
+ sd 0:0:0:0: [sda] 983808 512-byte logical blocks: (503 MB/480 MiB)
+ sd 0:0:0:0: [sda] Write Protect is off
+ sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
+ sd 0:0:0:0: [sda] Asking for cache data failed
+ sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sd 0:0:0:0: [sda] Asking for cache data failed
+ sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sda: sda1
+ sd 0:0:0:0: [sda] Asking for cache data failed
+ sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sd 0:0:0:0: [sda] Attached SCSI removable disk
next reply other threads:[~2011-10-19 8:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-19 8:59 Oliver Schinagl [this message]
2011-10-19 15:39 ` [Bug 42502] PROBLEM: USB 1.1 (and up) not working on AMD R900 Series chipset Bjorn Helgaas
2011-10-20 7:01 ` oliver
2011-11-28 20:45 ` Oliver Schinagl
[not found] <bug-42502-20552@https.bugzilla.kernel.org/>
[not found] ` <201109072200.p87M0G5V011358@demeter1.kernel.org>
2011-09-08 0:00 ` Oliver Schinagl
2011-09-13 17:54 ` Bjorn Helgaas
2011-09-22 18:17 ` Oliver Schinagl
2011-09-22 18:17 ` Oliver Schinagl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9E916A.4050007@schinagl.nl \
--to=oliver@schinagl.nl \
--cc=bhelgaas@google.com \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox