* Re: ACPI problems, Dell XPS 15z laptop
[not found] ` <4EF7BDBC.9000406-stAJ6ESoqRxg9hUCZPvPmw@public.gmane.org>
@ 2011-12-27 1:42 ` Cristian Rodríguez
2012-01-05 0:19 ` Bjorn Helgaas
1 sibling, 0 replies; 4+ messages in thread
From: Cristian Rodríguez @ 2011-12-27 1:42 UTC (permalink / raw)
To: linux-acpi-u79uwXL29TY76Z2rM5mHXA,
opensuse-kernel-stAJ6ESoqRxg9hUCZPvPmw, Thomas Renninger
On 25/12/11 21:20, Cristian Rodríguez wrote:
> It is random, let's say, the USB port works twice every three boots.
Ok, now back to home after xmas, I have managed to boot the machine with
an external USB keyboard attached here is dmesg
problems booting:
Neither touchpad or keyboard works unless I boot with pci=noapci
0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5a28000 (usable)
[ 0.000000] BIOS-e820: 00000000b5a28000 - 00000000b6e29000 (reserved)
[ 0.000000] BIOS-e820: 00000000b6e29000 - 00000000b886a000 (usable)
[ 0.000000] BIOS-e820: 00000000b886a000 - 00000000b8ab3000 (reserved)
[ 0.000000] BIOS-e820: 00000000b8ab3000 - 00000000bac8f000 (usable)
[ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad2e000 (reserved)
[ 0.000000] BIOS-e820: 00000000bad2e000 - 00000000bad3d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bad3d000 - 00000000badfb000 (reserved)
[ 0.000000] BIOS-e820: 00000000badfb000 - 00000000badfd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000badfd000 - 00000000badff000 (reserved)
[ 0.000000] BIOS-e820: 00000000badff000 - 00000000bae02000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae02000 - 00000000bae0a000 (reserved)
[ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved)
[ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/00WW5M, BIOS
A08 12/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] Scan SMP from ffff88000009d800 for 1024 bytes.
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[ 0.000000] 0000000000 - 00bb000000 page 2M
[ 0.000000] kernel direct mapping tables up to bb000000 @
1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
[ 0.000000] 0100000000 - 023fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 23fe00000 @
bac85000-bac8f000
[ 0.000000] RAMDISK: 373d9000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09
00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000baff3000 08A57 (v02 DELL SNB-CPT
00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf40000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09
00000002 LOHR 00000001)
[ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc
00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl
00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafeb000 00846 (v01 PmRef Cpu0Ist
00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm
00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF
00000001 PTL 00000001)
[ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB
00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
[ 0.000000] NODE_DATA [000000023fdec000 - 000000023fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD ->
[ffff880237400000-ffff88023e3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000b5a28
[ 0.000000] 0: 0x000b6e29 -> 0x000b886a
[ 0.000000] 0: 0x000b8ab3 -> 0x000bac8f
[ 0.000000] 0: 0x000bafff -> 0x000bb000
[ 0.000000] 0: 0x00100000 -> 0x0023fe00
[ 0.000000] On node 0 totalpages: 2069459
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 740990 pages, LIFO batch:31
[ 0.000000] Normal zone: 17913 pages used for memmap
[ 0.000000] Normal zone: 1292295 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2,
APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2,
APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2,
APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2,
APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2,
APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2,
APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2,
APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2,
APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2,
APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2,
APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2,
APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2,
APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2,
APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2,
APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2,
APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b5a28000 -
00000000b6e29000
[ 0.000000] PM: Registered nosave memory: 00000000b886a000 -
00000000b8ab3000
[ 0.000000] PM: Registered nosave memory: 00000000bac8f000 -
00000000bad2e000
[ 0.000000] PM: Registered nosave memory: 00000000bad2e000 -
00000000bad3d000
[ 0.000000] PM: Registered nosave memory: 00000000bad3d000 -
00000000badfb000
[ 0.000000] PM: Registered nosave memory: 00000000badfb000 -
00000000badfd000
[ 0.000000] PM: Registered nosave memory: 00000000badfd000 -
00000000badff000
[ 0.000000] PM: Registered nosave memory: 00000000badff000 -
00000000bae02000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 -
00000000bae0a000
[ 0.000000] PM: Registered nosave memory: 00000000bae0a000 -
00000000bae1b000
[ 0.000000] PM: Registered nosave memory: 00000000bae1b000 -
00000000baf18000
[ 0.000000] PM: Registered nosave memory: 00000000baf18000 -
00000000baf1c000
[ 0.000000] PM: Registered nosave memory: 00000000baf1c000 -
00000000baf1f000
[ 0.000000] PM: Registered nosave memory: 00000000baf1f000 -
00000000baf9f000
[ 0.000000] PM: Registered nosave memory: 00000000baf9f000 -
00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 -
00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 -
00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 -
00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 -
00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap:
bfa00000:38600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79744
r8192 d22656 u262144
[ 0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2037205
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9
resume=/dev/system/swap splash=verbose clocksource=hpet hpet64
ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug
i8042.debug vga=0x31b
[ 0.000000] bootsplash: verbose mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8067344k/9435136k available (5935k kernel code,
1157300k absent, 210492k reserved, 7648k data, 944k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet timer0 configured in 64-bit mode
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2793.229 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5586.45 BogoMIPS (lpj=2793229)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000037] Security Framework initialized
[ 0.000049] AppArmor: AppArmor initialized
[ 0.000647] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.002144] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.002776] Mount-cache hash table entries: 256
[ 0.002859] Initializing cgroup subsys cpuacct
[ 0.002863] Initializing cgroup subsys memory
[ 0.002877] Initializing cgroup subsys devices
[ 0.002880] Initializing cgroup subsys freezer
[ 0.002882] Initializing cgroup subsys net_cls
[ 0.002884] Initializing cgroup subsys blkio
[ 0.002890] Initializing cgroup subsys perf_event
[ 0.002912] Disabled fast string operations
[ 0.002915] CPU: Physical Processor ID: 0
[ 0.002917] CPU: Processor Core ID: 0
[ 0.002921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002922] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.002927] mce: CPU supports 7 MCE banks
[ 0.002936] CPU0: Thermal monitoring handled by SMI
[ 0.002941] using mwait in idle threads.
[ 0.003584] ACPI: Core revision 20110623
[ 0.059768] Getting VERSION: 1060015
[ 0.059771] Getting VERSION: 1060015
[ 0.059773] Getting ID: 0
[ 0.059774] Getting ID: 0
[ 0.059783] DMAR: Host address width 36
[ 0.059786] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.059792] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
c0000020e60262 ecap f0101a
[ 0.059796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.059801] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
c9008020660262 ecap f0105a
[ 0.059804] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff
[ 0.059807] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
[ 0.059879] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.059881] HPET id 0 under DRHD base 0xfed91000
[ 0.059884] HPET id 0 under DRHD base 0xfed91000
[ 0.059886] HPET id 0 under DRHD base 0xfed91000
[ 0.059888] HPET id 0 under DRHD base 0xfed91000
[ 0.059890] HPET id 0 under DRHD base 0xfed91000
[ 0.059892] HPET id 0 under DRHD base 0xfed91000
[ 0.059894] HPET id 0 under DRHD base 0xfed91000
[ 0.059896] HPET id 0 under DRHD base 0xfed91000
[ 0.060143] Enabled IRQ remapping in x2apic mode
[ 0.060146] Enabling x2apic
[ 0.060148] Enabled x2apic
[ 0.060153] Switched APIC routing to cluster x2apic.
[ 0.060158] enabled ExtINT on CPU#0
[ 0.060404] ESR value before enabling vector: 0x00000080 after:
0x00000000
[ 0.060421] ENABLING IO-APIC IRQs
[ 0.060423] init IO_APIC IRQs
[ 0.060424] apic 2 pin 0 not connected
[ 0.060427] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.060431] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060436] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0
Active:0 Dest:1)
[ 0.060439] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060443] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0
Active:0 Dest:1)
[ 0.060446] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:33 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060450] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:1)
[ 0.060453] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060457] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0
Active:0 Dest:1)
[ 0.060460] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:35 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060465] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:1)
[ 0.060467] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:36 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060472] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:1)
[ 0.060475] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:37 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060479] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.060482] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060486] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1
Active:0 Dest:1)
[ 0.060489] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060493] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10
Mode:0 Active:0 Dest:1)
[ 0.060496] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3A Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060500] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11
Mode:0 Active:0 Dest:1)
[ 0.060503] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3B Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060507] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12
Mode:0 Active:0 Dest:1)
[ 0.060510] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060514] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13
Mode:0 Active:0 Dest:1)
[ 0.060517] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060521] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14
Mode:0 Active:0 Dest:1)
[ 0.060524] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3E Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060528] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15
Mode:0 Active:0 Dest:1)
[ 0.060531] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3F Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060535] apic 2 pin 16 not connected
[ 0.060536] apic 2 pin 17 not connected
[ 0.060537] apic 2 pin 18 not connected
[ 0.060538] apic 2 pin 19 not connected
[ 0.060538] apic 2 pin 20 not connected
[ 0.060539] apic 2 pin 21 not connected
[ 0.060540] apic 2 pin 22 not connected
[ 0.060541] apic 2 pin 23 not connected
[ 0.060679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070666] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.070671] Using local APIC timer interrupts.
[ 0.070671] calibrating APIC timer ...
[ 0.172123] ... lapic delta = 623574
[ 0.172125] ... PM-Timer delta = 357949
[ 0.172126] ... PM-Timer result ok
[ 0.172128] ..... delta 623574
[ 0.172130] ..... mult: 26786370
[ 0.172132] ..... calibration result: 99771
[ 0.172134] ..... CPU clock speed is 2793.0611 MHz.
[ 0.172136] ..... host bus clock speed is 99.0771 MHz.
[ 0.172144] Performance Events: PEBS fmt1+, SandyBridge events, Intel
PMU driver.
[ 0.172150] PEBS disabled due to CPU errata.
[ 0.172154] ... version: 3
[ 0.172155] ... bit width: 48
[ 0.172157] ... generic registers: 4
[ 0.172159] ... value mask: 0000ffffffffffff
[ 0.172162] ... max period: 000000007fffffff
[ 0.172164] ... fixed-purpose events: 3
[ 0.172166] ... event mask: 000000070000000f
[ 0.180330] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.188150] Booting Node 0, Processors #1
[ 0.188160] smpboot cpu 1: start_ip = 98000
[ 0.199162] masked ExtINT on CPU#1
[ 0.259011] Disabled fast string operations
[ 0.259023] CPU1: Thermal monitoring handled by SMI
[ 0.279047] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.285004] #2
[ 0.285010] smpboot cpu 2: start_ip = 98000
[ 0.296013] masked ExtINT on CPU#2
[ 0.355853] Disabled fast string operations
[ 0.355864] CPU2: Thermal monitoring handled by SMI
[ 0.375921] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.381847] #3
[ 0.381852] smpboot cpu 3: start_ip = 98000
[ 0.392852] masked ExtINT on CPU#3
[ 0.452696] Disabled fast string operations
[ 0.452707] CPU3: Thermal monitoring handled by SMI
[ 0.472765] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.474664] Brought up 4 CPUs
[ 0.474673] Total of 4 processors activated (22346.24 BogoMIPS).
[ 0.478171] devtmpfs: initialized
[ 0.478919] PM: Registering ACPI NVS region at bad2e000 (61440 bytes)
[ 0.478924] PM: Registering ACPI NVS region at badfb000 (8192 bytes)
[ 0.478927] PM: Registering ACPI NVS region at badff000 (12288 bytes)
[ 0.478930] PM: Registering ACPI NVS region at bae0a000 (69632 bytes)
[ 0.478934] PM: Registering ACPI NVS region at baf18000 (16384 bytes)
[ 0.478938] PM: Registering ACPI NVS region at baf1f000 (524288 bytes)
[ 0.479061] print_constraints: dummy:
[ 0.479091] RTC time: 1:23:20, date: 12/27/11
[ 0.479128] NET: Registered protocol family 16
[ 0.479269] ACPI: bus type pci registered
[ 0.479329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.479334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.489012] PCI: Using configuration type 1 for base access
[ 0.489769] bio: create slab <bio-0> at 0
[ 0.489840] ACPI: Added _OSI(Module Device)
[ 0.489843] ACPI: Added _OSI(Processor Device)
[ 0.489846] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489848] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.491351] ACPI: EC: Look up EC in DSDT
[ 0.492860] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.499730] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.500574] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst
00003001 INTL 20061109)
[ 0.500979] ACPI: Dynamic OEM Table Load:
[ 0.500982] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst
00003001 INTL 20061109)
[ 0.506049] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst
00003000 INTL 20061109)
[ 0.506495] ACPI: Dynamic OEM Table Load:
[ 0.506498] ACPI: SSDT (null) 00303 (v01 PmRef ApIst
00003000 INTL 20061109)
[ 0.508778] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst
00003000 INTL 20061109)
[ 0.509171] ACPI: Dynamic OEM Table Load:
[ 0.509173] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20061109)
[ 0.514717] ACPI: Interpreter enabled
[ 0.514722] ACPI: (supports S0 S3 S4 S5)
[ 0.514744] ACPI: Using IOAPIC for interrupt routing
[ 0.520280] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.520446] ACPI: No dock devices found.
[ 0.520448] HEST: Table not found.
[ 0.520451] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.520852] \_SB_.PCI0:_OSC invalid UUID
[ 0.520853] _OSC request data:1 8 1f
[ 0.520856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.521533] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.521537] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.521540] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.521544] pci_root PNP0A08:00: host bridge window [mem
0xbfa00000-0xfeafffff]
[ 0.521548] pci_root PNP0A08:00: host bridge window [mem
0xfed40000-0xfed44fff]
[ 0.521559] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.521591] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.521611] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.521613] pci 0000:00:01.0: PME# disabled
[ 0.521630] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[ 0.521639] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.521644] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.521648] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.521692] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.521714] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit]
[ 0.521774] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.521778] pci 0000:00:16.0: PME# disabled
[ 0.521808] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.521828] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff]
[ 0.521898] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.521902] pci 0000:00:1a.0: PME# disabled
[ 0.521925] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.521939] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit]
[ 0.521991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.521994] pci 0000:00:1b.0: PME# disabled
[ 0.522016] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.522075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.522079] pci 0000:00:1c.0: PME# disabled
[ 0.522103] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.522162] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.522166] pci 0000:00:1c.1: PME# disabled
[ 0.522190] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.522249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.522253] pci 0000:00:1c.3: PME# disabled
[ 0.522277] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.522335] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.522339] pci 0000:00:1c.4: PME# disabled
[ 0.522363] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 0.522422] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.522426] pci 0000:00:1c.5: PME# disabled
[ 0.522455] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.522475] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff]
[ 0.522544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.522548] pci 0000:00:1d.0: PME# disabled
[ 0.522571] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
[ 0.522685] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 0.522702] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.522710] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.522717] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.522725] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.522732] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.522740] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff]
[ 0.522770] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.522774] pci 0000:00:1f.2: PME# disabled
[ 0.522791] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.522805] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit]
[ 0.522826] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.522875] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300
[ 0.522882] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[ 0.522890] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.522898] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff
64bit pref]
[ 0.522903] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.522909] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.524596] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.524609] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.524616] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.524626] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 0.524698] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.524908] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280
[ 0.525049] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit]
[ 0.525618] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.525652] pci 0000:03:00.0: PME# disabled
[ 0.527703] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.527711] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff]
[ 0.527783] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
[ 0.527808] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit]
[ 0.527912] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.527917] pci 0000:04:00.0: PME# disabled
[ 0.529595] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.529614] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff]
[ 0.529692] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.529700] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.529769] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200
[ 0.529796] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit]
[ 0.529810] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f]
[ 0.529905] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.529910] pci 0000:06:00.0: PME# disabled
[ 0.531592] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.531606] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.531617] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.531674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.531763] 0000:00:1f[A] -> [21]
[ 0.531766] 0000:00:1f[B] -> [19]
[ 0.531769] 0000:00:1f[C] -> [18]
[ 0.531771] 0000:00:1f[D] -> [16]
[ 0.531773] 0000:00:1d[A] -> [23]
[ 0.531776] 0000:00:1a[A] -> [16]
[ 0.531778] 0000:00:1b[A] -> [22]
[ 0.531781] 0000:00:16[A] -> [16]
[ 0.531783] 0000:00:16[B] -> [19]
[ 0.531785] 0000:00:16[C] -> [18]
[ 0.531788] 0000:00:16[D] -> [17]
[ 0.531790] 0000:00:1c[A] -> [16]
[ 0.531792] 0000:00:1c[B] -> [17]
[ 0.531795] 0000:00:1c[C] -> [18]
[ 0.531797] 0000:00:1c[D] -> [19]
[ 0.531799] 0000:00:01[A] -> [16]
[ 0.531802] 0000:00:01[B] -> [17]
[ 0.531804] 0000:00:01[C] -> [18]
[ 0.531806] 0000:00:01[D] -> [19]
[ 0.531809] 0000:00:02[A] -> [16]
[ 0.531811] 0000:00:04[A] -> [16]
[ 0.531813] 0000:00:04[B] -> [17]
[ 0.531816] 0000:00:04[C] -> [18]
[ 0.531818] 0000:00:04[D] -> [19]
[ 0.531840] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.0 is a PCI bridge
[ 0.531846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.531874] 0000:02:00[A] -> [16]
[ 0.531877] 0000:02:00[B] -> [17]
[ 0.531879] 0000:02:00[C] -> [18]
[ 0.531882] 0000:02:00[D] -> [19]
[ 0.531890] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.1 is a PCI bridge
[ 0.531896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.531923] 0000:03:00[A] -> [17]
[ 0.531925] 0000:03:00[B] -> [18]
[ 0.531928] 0000:03:00[C] -> [19]
[ 0.531930] 0000:03:00[D] -> [16]
[ 0.531940] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.3 is a PCI bridge
[ 0.531945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.531972] 0000:04:00[A] -> [19]
[ 0.531974] 0000:04:00[B] -> [16]
[ 0.531977] 0000:04:00[C] -> [17]
[ 0.531979] 0000:04:00[D] -> [18]
[ 0.531988] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.4 is a PCI bridge
[ 0.531994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.532020] 0000:05:00[A] -> [16]
[ 0.532023] 0000:05:00[B] -> [17]
[ 0.532025] 0000:05:00[C] -> [18]
[ 0.532028] 0000:05:00[D] -> [19]
[ 0.532053] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.5 is a PCI bridge
[ 0.532058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.532085] 0000:06:00[A] -> [17]
[ 0.532087] 0000:06:00[B] -> [18]
[ 0.532090] 0000:06:00[C] -> [19]
[ 0.532092] 0000:06:00[D] -> [16]
[ 0.532109] pci_bind-0085 [00] pci_bind : Device
0000:00:01.0 is a PCI bridge
[ 0.532114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.532141] 0000:01:00[A] -> [16]
[ 0.532143] 0000:01:00[B] -> [17]
[ 0.532146] 0000:01:00[C] -> [18]
[ 0.532148] 0000:01:00[D] -> [19]
[ 0.532198] \_SB_.PCI0:_OSC invalid UUID
[ 0.532198] _OSC request data:1 1f 1f
[ 0.532201] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.532239] \_SB_.PCI0:_OSC invalid UUID
[ 0.532240] _OSC request data:1 0 1d
[ 0.532242] pci0000:00: ACPI _OSC request failed (AE_ERROR),
returned control mask: 0x1d
[ 0.532246] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.535536] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535572] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11
[ 0.535577] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12
14 15)
[ 0.535607] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535638] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9
[ 0.535642] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12
14 15) *9
[ 0.535671] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535699] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9
[ 0.535703] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12
14 15) *9
[ 0.535731] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535759] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10
[ 0.535763] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12
14 15)
[ 0.535790] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535818] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0
[ 0.535822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.535850] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535878] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0
[ 0.535882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.535911] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535939] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10
[ 0.535942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12
14 15)
[ 0.535970] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535998] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11
[ 0.536002] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12
14 15)
[ 0.536069] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.536078] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.536083] vgaarb: loaded
[ 0.536085] vgaarb: bridge control possible 0000:01:00.0
[ 0.536087] vgaarb: no bridge control possible 0000:00:02.0
[ 0.536179] SCSI subsystem initialized
[ 0.536213] libata version 3.00 loaded.
[ 0.536245] usbcore: registered new interface driver usbfs
[ 0.536257] usbcore: registered new interface driver hub
[ 0.536277] usbcore: registered new device driver usb
[ 0.536324] PCI: Using ACPI for IRQ routing
[ 0.537738] PCI: pci_cache_line_size set to 64 bytes
[ 0.537863] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.537865] reserve RAM buffer: 00000000b5a28000 - 00000000b7ffffff
[ 0.537867] reserve RAM buffer: 00000000b886a000 - 00000000bbffffff
[ 0.537871] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff
[ 0.537874] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.537876] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
[ 0.537947] NetLabel: Initializing
[ 0.537950] NetLabel: domain hash size = 128
[ 0.537952] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.537961] NetLabel: unlabeled traffic allowed by default
[ 0.537971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.537977] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.539993] Switching to clocksource hpet
[ 0.541903] AppArmor: AppArmor Filesystem Enabled
[ 0.541922] pnp: PnP ACPI init
[ 0.541934] ACPI: bus type pnp registered
[ 0.542307] pnp 00:00: [bus 00-3e]
[ 0.542310] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.542311] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.542313] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.542314] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.542316] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.542317] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.542318] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.542320] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.542321] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.542322] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.542324] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.542325] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.542326] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.542328] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.542329] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.542331] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.542332] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.542333] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.542335] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.542374] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.542387] pnp 00:01: [io 0x0000-0x001f]
[ 0.542389] pnp 00:01: [io 0x0081-0x0091]
[ 0.542390] pnp 00:01: [io 0x0093-0x009f]
[ 0.542391] pnp 00:01: [io 0x00c0-0x00df]
[ 0.542392] pnp 00:01: [dma 4]
[ 0.542409] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.542484] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.542501] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.542511] pnp 00:03: [io 0x00f0]
[ 0.542515] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13
Mode:0 Active:0 Dest:1)
[ 0.542519] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542525] pnp 00:03: [irq 13]
[ 0.542541] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.542550] pnp 00:04: [io 0x002e-0x002f]
[ 0.542551] pnp 00:04: [io 0x004e-0x004f]
[ 0.542553] pnp 00:04: [io 0x0061]
[ 0.542555] pnp 00:04: [io 0x0063]
[ 0.542556] pnp 00:04: [io 0x0065]
[ 0.542557] pnp 00:04: [io 0x0067]
[ 0.542558] pnp 00:04: [io 0x0068]
[ 0.542559] pnp 00:04: [io 0x006c]
[ 0.542560] pnp 00:04: [io 0x0070]
[ 0.542561] pnp 00:04: [io 0x0080]
[ 0.542562] pnp 00:04: [io 0x0092]
[ 0.542563] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.542564] pnp 00:04: [io 0x0680-0x069f]
[ 0.542566] pnp 00:04: [io 0x1000-0x1003]
[ 0.542567] pnp 00:04: [io 0x1004-0x1013]
[ 0.542568] pnp 00:04: [io 0xffff]
[ 0.542569] pnp 00:04: [io 0x0400-0x0453]
[ 0.542570] pnp 00:04: [io 0x0458-0x047f]
[ 0.542571] pnp 00:04: [io 0x0500-0x057f]
[ 0.542573] pnp 00:04: [io 0x164e-0x164f]
[ 0.542606] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.542610] system 00:04: [io 0x1000-0x1003] has been reserved
[ 0.542613] system 00:04: [io 0x1004-0x1013] has been reserved
[ 0.542616] system 00:04: [io 0xffff] has been reserved
[ 0.542619] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.542622] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.542625] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.542628] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.542631] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.542639] pnp 00:05: [io 0x0070-0x0077]
[ 0.542641] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.542644] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542649] pnp 00:05: [irq 8]
[ 0.542666] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.542692] pnp 00:06: [io 0x0454-0x0457]
[ 0.542721] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.542724] system 00:06: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.542760] pnp 00:07: [io 0x0060]
[ 0.542761] pnp 00:07: [io 0x0064]
[ 0.542763] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.542766] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542770] pnp 00:07: [irq 1]
[ 0.542788] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.542817] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12
Mode:0 Active:0 Dest:1)
[ 0.542820] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542824] pnp 00:08: [irq 12]
[ 0.542842] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13
(active)
[ 0.542954] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.542955] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[ 0.542957] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.542958] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.542959] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 0.542960] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.542962] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.542964] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.542965] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.542966] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.542968] pnp 00:09: [mem 0xfffff000-0xffffffff]
[ 0.542980] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because
it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.543006] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.543010] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.543013] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.543017] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.543020] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.543023] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.543027] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.543030] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.543033] system 00:09: [mem 0xff000000-0xffffffff] could not be
reserved
[ 0.543037] system 00:09: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.543047] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.543171] IOAPIC[0]: Set routing entry (2-20 -> 0x49 -> IRQ 20
Mode:0 Active:0 Dest:1)
[ 0.543174] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:49 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.543177] pnp 00:0a: [irq 20]
[ 0.543206] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
[ 0.543336] pnp: PnP ACPI: found 11 devices
[ 0.543338] ACPI: ACPI bus type pnp unregistered
[ 0.549778] pci 0000:01:00.0: no compatible bridge window for [mem
0xfff80000-0xffffffff pref]
[ 0.549785] PCI: max bus depth: 1 pci_try_num: 2
[ 0.549827] pci 0000:01:00.0: BAR 6: assigned [mem
0xf1000000-0xf107ffff pref]
[ 0.549831] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.549834] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.549838] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.549842] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 0.549847] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.549859] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.549865] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff]
[ 0.549874] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.549880] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff]
[ 0.549890] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.549896] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.549905] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.549909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.549915] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.549928] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:01.0[A] _PRT entry
[ 0.549937] IOAPIC[0]: Set routing entry (2-16 -> 0x51 -> IRQ 16
Mode:1 Active:1 Dest:1)
[ 0.549941] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:51 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.549944] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.549948] pci 0000:00:01.0: setting latency timer to 64
[ 0.549954] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.0[A] _PRT entry
[ 0.549959] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.549965] pci 0000:00:1c.0: setting latency timer to 64
[ 0.549971] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.1[B] _PRT entry
[ 0.549977] IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17
Mode:1 Active:1 Dest:1)
[ 0.549980] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:59 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.549983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.549988] pci 0000:00:1c.1: setting latency timer to 64
[ 0.549994] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.3[D] _PRT entry
[ 0.550001] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19
Mode:1 Active:1 Dest:1)
[ 0.550004] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:61 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.550006] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.550011] pci 0000:00:1c.3: setting latency timer to 64
[ 0.550017] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.4[A] _PRT entry
[ 0.550022] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.550027] pci 0000:00:1c.4: setting latency timer to 64
[ 0.550039] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.5[B] _PRT entry
[ 0.550044] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.550050] pci 0000:00:1c.5: setting latency timer to 64
[ 0.550053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.550054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.550056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.550057] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.550059] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.550060] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.550061] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.550063] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff
64bit pref]
[ 0.550064] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
[ 0.550066] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff]
[ 0.550067] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff]
[ 0.550069] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.550070] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff]
[ 0.550125] NET: Registered protocol family 2
[ 0.550318] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.551888] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.553016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.553157] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.553161] TCP reno registered
[ 0.553175] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.553205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.553308] NET: Registered protocol family 1
[ 0.553322] pci 0000:00:02.0: Boot video device
[ 0.553459] PCI: CLS 64 bytes, default 64
[ 0.553496] Unpacking initramfs...
[ 0.723042] Freeing initrd memory: 12380k freed
[ 0.724650] DMAR: No ATSR found
[ 0.724686] IOMMU 0 0xfed90000: using Queued invalidation
[ 0.724688] IOMMU 1 0xfed91000: using Queued invalidation
[ 0.724692] IOMMU: Setting RMRR:
[ 0.724704] IOMMU: Setting identity map for device 0000:00:02.0
[0xbb800000 - 0xbf9fffff]
[ 0.725062] IOMMU: Setting identity map for device 0000:00:1d.0
[0xbae1d000 - 0xbae33fff]
[ 0.725085] IOMMU: Setting identity map for device 0000:00:1a.0
[0xbae1d000 - 0xbae33fff]
[ 0.725099] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 0.725108] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0
- 0xffffff]
[ 0.725335] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 0.727095] audit: initializing netlink socket (disabled)
[ 0.727106] type=2000 audit(1324949000.518:1): initialized
[ 0.749859] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.765057] VFS: Disk quotas dquot_6.5.2
[ 0.765086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.765302] msgmni has been set to 15909
[ 0.765461] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.765486] io scheduler noop registered (default)
[ 0.765491] io scheduler deadline registered
[ 0.765508] io scheduler cfq registered
[ 0.765594] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.765617] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.765914] vesafb: mode is 1280x1024x32, linelength=5120, pages=11
[ 0.765917] vesafb: scrolling: redraw
[ 0.765920] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.767586] vesafb: framebuffer at 0xe0000000, mapped to
0xffffc90005800000, using 10240k, total 65472k
[ 0.767738] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 0.767739] bootsplash: silentjpeg size 109002 bytes
[ 0.777989] bootsplash: ...found (1280x1024, 40442 bytes, v3).
[ 0.778101] bootsplash: silentjpeg size 126037 bytes
[ 0.882677] Console: switching to colour frame buffer device 156x60
[ 0.962069] fb0: VESA VGA frame buffer device
[ 0.962474] intel_idle: MWAIT substates: 0x21120
[ 0.962475] intel_idle: v0.4 model 0x2A
[ 0.962476] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.962518] ERST: Table is not found!
[ 0.962842] GHES: HEST is not enabled!
[ 0.963242] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.084566] Non-volatile memory driver v1.3
[ 1.084937] Linux agpgart interface v0.103
[ 1.085368] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.086005] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
total, 262144K mappable
[ 1.087854] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.088547] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.089240] ahci 0000:00:1f.2: version 3.0
[ 1.089249] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1f.2[B] _PRT entry
[ 1.089987] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.090633] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.090657] ahci: SSS flag set, parallel bus scan disabled
[ 1.101254] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x13 impl SATA mode
[ 1.102014] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
pio slum part ems sxs apst
[ 1.102794] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.106635] scsi0 : ahci
[ 1.106935] scsi1 : ahci
[ 1.107220] scsi2 : ahci
[ 1.107497] scsi3 : ahci
[ 1.107773] scsi4 : ahci
[ 1.108048] scsi5 : ahci
[ 1.108376] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08100 irq 43
[ 1.109028] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08180 irq 43
[ 1.109687] ata3: DUMMY
[ 1.109906] ata4: DUMMY
[ 1.110126] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08300 irq 43
[ 1.110785] ata6: DUMMY
[ 1.111067] Fixed MDIO Bus: probed
[ 1.111378] arcnet loaded.
[ 1.111620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.112214] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1a.0[A] _PRT entry
[ 1.112956] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.113604] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.113607] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.114089] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.114781] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.141311] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.141329] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000
[ 1.173136] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.195461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.217783] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.240042] usb usb1: Product: EHCI Host Controller
[ 1.262192] usb usb1: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd
[ 1.284442] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.306584] hub 1-0:1.0: USB hub found
[ 1.328442] hub 1-0:1.0: 2 ports detected
[ 1.350123] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1d.0[A] _PRT entry
[ 1.372171] IOAPIC[0]: Set routing entry (2-23 -> 0x79 -> IRQ 23
Mode:1 Active:1 Dest:1)
[ 1.372176] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:79 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 1.372180] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.394153] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.394156] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.414770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.437965] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.460503] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[ 1.460548] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.464440] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.464459] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000
[ 1.473673] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.473717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.473718] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.473720] usb usb2: Product: EHCI Host Controller
[ 1.473721] usb usb2: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd
[ 1.473722] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.473841] hub 2-0:1.0: USB hub found
[ 1.473845] hub 2-0:1.0: 2 ports detected
[ 1.473918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.473931] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.753069] Initializing USB Mass Storage driver...
[ 1.753071] Refined TSC clocksource calibration: 2793.653 MHz.
[ 1.755293] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 256GB,
AXM08D1Q, max UDMA/133
[ 1.755295] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.755611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[ 1.757928] ata1.00: configured for UDMA/133
[ 1.854112] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.912671] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81
AXM0 PQ: 0 ANSI: 5
[ 1.912674] usbcore: registered new interface driver usb-storage
[ 1.912675] USB Mass Storage support registered.
[ 1.912682] usbcore: registered new interface driver ums-alauda
[ 1.912688] usbcore: registered new interface driver ums-cypress
[ 1.912694] usbcore: registered new interface driver ums-datafab
[ 1.912701] usbcore: registered new interface driver ums-freecom
[ 1.912707] usbcore: registered new interface driver ums-isd200
[ 1.912713] usbcore: registered new interface driver ums-jumpshot
[ 1.912718] usbcore: registered new interface driver ums-karma
[ 1.912724] usbcore: registered new interface driver ums-onetouch
[ 1.912730] usbcore: registered new interface driver ums-sddr09
[ 1.912736] usbcore: registered new interface driver ums-sddr55
[ 1.912741] usbcore: registered new interface driver ums-usbat
[ 1.912768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 1.912807] i8042: [0] 20 -> i8042 (command)
[ 1.913286] i8042: [0] 67 <- i8042 (return)
[ 1.913347] i8042: [1] 20 -> i8042 (command)
[ 1.913721] i8042: [1] 67 <- i8042 (return)
[ 1.913726] i8042: [1] 60 -> i8042 (command)
[ 1.913889] i8042: [1] 76 -> i8042 (parameter)
[ 1.914109] i8042: [1] d3 -> i8042 (command)
[ 1.914325] i8042: [1] 5a -> i8042 (parameter)
[ 1.914544] i8042: [1] 5a <- i8042 (return)
[ 1.914553] i8042: [2] a7 -> i8042 (command)
[ 1.914661] i8042: [2] 20 -> i8042 (command)
[ 1.914931] i8042: [2] 76 <- i8042 (return)
[ 1.914935] i8042: [2] a8 -> i8042 (command)
[ 1.915095] i8042: [2] 20 -> i8042 (command)
[ 1.915364] i8042: [2] 56 <- i8042 (return)
[ 1.915373] i8042: [3] 60 -> i8042 (command)
[ 1.915536] i8042: [3] 74 -> i8042 (parameter)
[ 1.915763] i8042: [3] d3 -> i8042 (command)
[ 1.915978] i8042: [3] f0 -> i8042 (parameter)
[ 1.916198] i8042: [3] f0 <- i8042 (return)
[ 1.916222] i8042: [4] d3 -> i8042 (command)
[ 1.916282] i8042: [4] 56 -> i8042 (parameter)
[ 1.916555] i8042: [4] 56 <- i8042 (return)
[ 1.916567] i8042: [4] d3 -> i8042 (command)
[ 1.916783] i8042: [4] a4 -> i8042 (parameter)
[ 1.917002] i8042: [4] a4 <- i8042 (return)
[ 1.917027] i8042: [5] 60 -> i8042 (command)
[ 1.917137] i8042: [5] 56 -> i8042 (parameter)
[ 1.917309] i8042: [5] 60 -> i8042 (command)
[ 1.917525] i8042: [5] 47 -> i8042 (parameter)
[ 1.917528] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.917552] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.917632] mousedev: PS/2 mouse device common for all mice
[ 1.917760] i8042: [5] f2 -> i8042 (kbd-data)
[ 1.917804] rtc_cmos 00:05: RTC can wake from S4
[ 1.917906] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.917932] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.918037] cpuidle: using governor ladder
[ 2.402856] i8042: [491] ed -> i8042 (kbd-data)
[ 2.402866] i8042: [491] fa <- i8042 (interrupt, 0, 12)
[ 2.402926] hpet1: lost 30 rtc interrupts
[ 2.403065] cpuidle: using governor menu
[ 2.403067] EFI Variables Facility v0.08 2004-May-17
[ 2.403295] usbcore: registered new interface driver usbhid
[ 2.403297] usbhid: USB HID core driver
[ 2.404035] i8042: [492] 00 -> i8042 (kbd-data)
[ 2.510920] i8042: [599] fa <- i8042 (interrupt, 0, 1)
[ 2.510940] i8042: [599] ed -> i8042 (kbd-data)
[ 2.511103] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 2.511126] TCP cubic registered
[ 2.511128] IPv6: Loaded, but administratively disabled, reboot
required to enable
[ 2.511144] lib80211: common routines for IEEE802.11 drivers
[ 2.511145] lib80211_crypt: registered algorithm 'NULL'
[ 2.511147] Registering the dns_resolver key type
[ 2.511162] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 2.511169]
[ 2.511169] printing PIC contents
[ 2.511173] ... PIC IMR: ffff
[ 2.511177] ... PIC IRR: 0c01
[ 2.511184] ... PIC ISR: 0000
[ 2.511187] ... PIC ELCR: 0e00
[ 2.643783] printing local APIC contents on CPU#0/0:
[ 2.643784] ... APIC ID: 00000000 (0)
[ 2.666176] ... APIC VERSION: 01060015
[ 2.688175] ... APIC TASKPRI: 00000000 (00)
[ 2.688176] ... APIC PROCPRI: 00000000
[ 2.688177] ... APIC LDR: 00000001
[ 2.688178] ... APIC SPIV: 000001ff
[ 2.688179] ... APIC ISR field:
[ 2.688180]
0000000000000000000000000000000000000000000000000000000000000000
[ 2.709866] i8042: [799] f4 -> i8042 (kbd-data)
[ 2.710552] ... APIC TMR field:
[ 2.710553]
0000000000000000000000000000000000000000000000000000000000000000
[ 2.732661] ... APIC IRR field:
[ 2.732662]
0000000002020000000200000000000000000000000000000000000000008000
[ 2.754421] ... APIC ESR: 00000000
[ 2.754422] ... APIC ICR: 000008fd
[ 2.754422] ... APIC ICR2: 00000040
[ 2.754423] ... APIC LVTT: 000000ef
[ 2.754424] ... APIC LVTPC: 00000400
[ 2.754425] ... APIC LVT0: 00010700
[ 2.754426] ... APIC LVT1: 00000400
[ 2.754427] ... APIC LVTERR: 000000fe
[ 2.754428] ... APIC TMICT: 000004c0
[ 2.754428] ... APIC TMCCT: 00000000
[ 2.754429] ... APIC TDCR: 00000003
[ 2.754430]
[ 2.775580] number of MP IRQ sources: 15.
[ 2.775582] number of IO-APIC #2 registers: 24.
[ 2.775583] testing the IO APIC.......................
[ 2.775623] i8042: [864] fa <- i8042 (interrupt, 0, 1)
[ 2.775695] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 2.775800] sd 0:0:0:0: [sda] Write Protect is off
[ 2.775802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.775812] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.786128] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.786130] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.815686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.820070] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133
[ 2.825187] ata2.00: configured for UDMA/133
[ 2.830643] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N
A101 PQ: 0 ANSI: 5
[ 2.995778]
[ 2.995813] i8042: [1085] d4 -> i8042 (command)
[ 2.995924] i8042: [1085] f2 -> i8042 (parameter)
[ 2.995926] hub 1-1:1.0: USB hub found
[ 2.996023] hub 1-1:1.0: 6 ports detected
[ 2.997464] sda: sda1 sda2
[ 2.999069] i8042: [1087] fa <- i8042 (interrupt, 1, 12)
[ 2.999923] i8042: [1088] 00 <- i8042 (interrupt, 1, 12)
[ 2.999939] i8042: [1089] 60 -> i8042 (command)
[ 3.000102] i8042: [1089] 45 -> i8042 (parameter)
[ 3.000317] i8042: [1089] 60 -> i8042 (command)
[ 3.000531] i8042: [1089] 47 -> i8042 (parameter)
[ 3.000767] i8042: [1089] d4 -> i8042 (command)
[ 3.000930] i8042: [1089] f2 -> i8042 (parameter)
[ 3.004925] i8042: [1089] fa <- i8042 (interrupt, 1, 12)
[ 3.005855] i8042: [1094] 00 <- i8042 (interrupt, 1, 12)
[ 3.005871] i8042: [1095] d4 -> i8042 (command)
[ 3.006034] i8042: [1095] f6 -> i8042 (parameter)
[ 3.009373] i8042: [1095] fa <- i8042 (interrupt, 1, 12)
[ 3.009391] i8042: [1099] d4 -> i8042 (command)
[ 3.009609] i8042: [1099] f3 -> i8042 (parameter)
[ 3.012027] i8042: [1099] fa <- i8042 (interrupt, 1, 12)
[ 3.012042] i8042: [1101] d4 -> i8042 (command)
[ 3.012206] i8042: [1101] 0a -> i8042 (parameter)
[ 3.015493] i8042: [1101] fa <- i8042 (interrupt, 1, 12)
[ 3.015508] i8042: [1105] d4 -> i8042 (command)
[ 3.015725] i8042: [1105] e8 -> i8042 (parameter)
[ 3.018010] i8042: [1105] fa <- i8042 (interrupt, 1, 12)
[ 3.018029] i8042: [1107] d4 -> i8042 (command)
[ 3.018192] i8042: [1107] 00 -> i8042 (parameter)
[ 3.020628] i8042: [1107] fa <- i8042 (interrupt, 1, 12)
[ 3.020643] i8042: [1110] d4 -> i8042 (command)
[ 3.020807] i8042: [1110] f3 -> i8042 (parameter)
[ 3.023287] i8042: [1110] fa <- i8042 (interrupt, 1, 12)
[ 3.023302] i8042: [1112] d4 -> i8042 (command)
[ 3.023465] i8042: [1112] 14 -> i8042 (parameter)
[ 3.026067] i8042: [1113] fa <- i8042 (interrupt, 1, 12)
[ 3.026083] i8042: [1115] d4 -> i8042 (command)
[ 3.026247] i8042: [1115] f3 -> i8042 (parameter)
[ 3.029425] i8042: [1115] fa <- i8042 (interrupt, 1, 12)
[ 3.029440] i8042: [1119] d4 -> i8042 (command)
[ 3.029708] i8042: [1119] 3c -> i8042 (parameter)
[ 3.031965] i8042: [1119] fa <- i8042 (interrupt, 1, 12)
[ 3.031981] i8042: [1121] d4 -> i8042 (command)
[ 3.032144] i8042: [1121] f3 -> i8042 (parameter)
[ 3.034971] i8042: [1121] fa <- i8042 (interrupt, 1, 12)
[ 3.034987] i8042: [1124] d4 -> i8042 (command)
[ 3.035149] i8042: [1124] 28 -> i8042 (parameter)
[ 3.037422] i8042: [1124] fa <- i8042 (interrupt, 1, 12)
[ 3.037436] i8042: [1127] d4 -> i8042 (command)
[ 3.037600] i8042: [1127] f3 -> i8042 (parameter)
[ 3.040473] i8042: [1127] fa <- i8042 (interrupt, 1, 12)
[ 3.040490] i8042: [1130] d4 -> i8042 (command)
[ 3.040757] i8042: [1130] 14 -> i8042 (parameter)
[ 3.043019] i8042: [1130] fa <- i8042 (interrupt, 1, 12)
[ 3.043034] i8042: [1132] d4 -> i8042 (command)
[ 3.043198] i8042: [1132] f3 -> i8042 (parameter)
[ 3.046227] i8042: [1132] fa <- i8042 (interrupt, 1, 12)
[ 3.046243] i8042: [1135] d4 -> i8042 (command)
[ 3.046408] i8042: [1135] 14 -> i8042 (parameter)
[ 3.048701] i8042: [1135] fa <- i8042 (interrupt, 1, 12)
[ 3.048718] i8042: [1138] d4 -> i8042 (command)
[ 3.048882] i8042: [1138] f3 -> i8042 (parameter)
[ 3.051911] i8042: [1138] fa <- i8042 (interrupt, 1, 12)
[ 3.051926] i8042: [1141] d4 -> i8042 (command)
[ 3.052194] i8042: [1141] 3c -> i8042 (parameter)
[ 3.054453] i8042: [1141] fa <- i8042 (interrupt, 1, 12)
[ 3.054467] i8042: [1144] d4 -> i8042 (command)
[ 3.054630] i8042: [1144] f3 -> i8042 (parameter)
[ 3.060839] i8042: [1144] fa <- i8042 (interrupt, 1, 12)
[ 3.060853] i8042: [1150] d4 -> i8042 (command)
[ 3.061069] i8042: [1150] 28 -> i8042 (parameter)
[ 3.063300] i8042: [1150] fa <- i8042 (interrupt, 1, 12)
[ 3.063316] i8042: [1153] d4 -> i8042 (command)
[ 3.063479] i8042: [1153] f3 -> i8042 (parameter)
[ 3.066150] i8042: [1153] fa <- i8042 (interrupt, 1, 12)
[ 3.066166] i8042: [1155] d4 -> i8042 (command)
[ 3.066329] i8042: [1155] 14 -> i8042 (parameter)
[ 3.068591] i8042: [1156] fa <- i8042 (interrupt, 1, 12)
[ 3.068608] i8042: [1158] d4 -> i8042 (command)
[ 3.068772] i8042: [1158] f3 -> i8042 (parameter)
[ 3.071764] i8042: [1158] fa <- i8042 (interrupt, 1, 12)
[ 3.071780] i8042: [1161] d4 -> i8042 (command)
[ 3.071943] i8042: [1161] 14 -> i8042 (parameter)
[ 3.074268] i8042: [1161] fa <- i8042 (interrupt, 1, 12)
[ 3.074285] i8042: [1164] d4 -> i8042 (command)
[ 3.074448] i8042: [1164] f2 -> i8042 (parameter)
[ 3.077037] i8042: [1164] fa <- i8042 (interrupt, 1, 12)
[ 3.077906] i8042: [1166] 00 <- i8042 (interrupt, 1, 12)
[ 3.077922] i8042: [1167] d4 -> i8042 (command)
[ 3.078085] i8042: [1167] e8 -> i8042 (parameter)
[ 3.080814] i8042: [1167] fa <- i8042 (interrupt, 1, 12)
[ 3.080830] i8042: [1170] d4 -> i8042 (command)
[ 3.081046] i8042: [1170] 00 -> i8042 (parameter)
[ 3.083272] i8042: [1170] fa <- i8042 (interrupt, 1, 12)
[ 3.083288] i8042: [1173] d4 -> i8042 (command)
[ 3.083555] i8042: [1173] e8 -> i8042 (parameter)
[ 3.085294] IO APIC #2......
[ 3.085295] .... register #00: 02000000
[ 3.085296] ....... : physical APIC id: 02
[ 3.085297] ....... : Delivery Type: 0
[ 3.085298] ....... : LTS : 0
[ 3.085299] .... register #01: 00170020
[ 3.085300] ....... : max redirection entries: 17
[ 3.085301] ....... : PRQ implemented: 0
[ 3.085302] ....... : IO APIC version: 20
[ 3.085302] .... IRQ redirection table:
[ 3.085303] NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:
[ 3.085308] 00 0000 0 1 0 0 0 0 0 0 00
[ 3.085313] 01 0011 1 0 0 0 0 0 0 0 01
[ 3.085318] 02 0001 1 0 0 0 0 0 0 0 02
[ 3.085323] 03 0002 1 0 0 0 0 0 0 0 03
[ 3.085328] 04 0003 1 0 0 0 0 0 0 0 04
[ 3.085333] 05 0004 1 0 0 0 0 0 0 0 05
[ 3.085342] 06 0005 1 0 0 0 0 0 0 0 06
[ 3.085347] 07 0006 1 0 0 0 0 0 0 0 07
[ 3.085352] 08 0010 1 0 0 0 0 0 0 0 08
[ 3.085356] 09 0008 1 0 1 0 0 0 0 0 09
[ 3.085363] 0a 0009 1 0 0 0 0 0 0 0 0A
[ 3.085368] 0b 000A 1 0 0 0 0 0 0 0 0B
[ 3.085373] 0c 0012 1 0 0 0 0 0 0 0 0C
[ 3.085378] 0d 000F 1 0 0 0 0 0 0 0 0D
[ 3.085383] 0e 000D 1 0 0 0 0 0 0 0 0E
[ 3.085388] 0f 000E 1 0 0 0 0 0 0 0 0F
[ 3.085393] 10 0014 1 0 1 0 1 0 0 0 10
[ 3.085398] 11 0015 1 1 1 0 1 0 0 0 11
[ 3.085402] 12 0000 0 1 0 0 0 0 0 0 00
[ 3.085407] 13 0016 1 1 1 0 1 0 0 0 13
[ 3.085412] 14 0013 1 0 0 0 0 0 0 0 14
[ 3.085417] 15 0000 0 1 0 0 0 0 0 0 00
[ 3.085421] 16 0000 0 1 0 0 0 0 0 0 00
[ 3.085426] 17 0019 1 0 1 0 1 0 0 0 17
[ 3.085428] IRQ to pin mappings:
[ 3.085429] IRQ0 -> 0:2
[ 3.085431] IRQ1 -> 0:1
[ 3.085432] IRQ3 -> 0:3
[ 3.085433] IRQ4 -> 0:4
[ 3.085435] IRQ5 -> 0:5
[ 3.085436] IRQ6 -> 0:6
[ 3.085437] IRQ7 -> 0:7
[ 3.085438] IRQ8 -> 0:8
[ 3.085440] IRQ9 -> 0:9
[ 3.085441] IRQ10 -> 0:10
[ 3.085443] IRQ11 -> 0:11
[ 3.085444] IRQ12 -> 0:12
[ 3.085445] IRQ13 -> 0:13
[ 3.085446] IRQ14 -> 0:14
[ 3.085448] IRQ15 -> 0:15
[ 3.085449] IRQ16 -> 0:16
[ 3.085450] IRQ17 -> 0:17
[ 3.085451] IRQ19 -> 0:19
[ 3.085453] IRQ20 -> 0:20
[ 3.085454] IRQ23 -> 0:23
[ 3.085455] .................................... done.
[ 3.085478] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.086479] i8042: [1175] fa <- i8042 (interrupt, 1, 12)
[ 3.086492] i8042: [1176] d4 -> i8042 (command)
[ 3.086656] i8042: [1176] 00 -> i8042 (parameter)
[ 3.089087] i8042: [1176] fa <- i8042 (interrupt, 1, 12)
[ 3.089102] i8042: [1178] d4 -> i8042 (command)
[ 3.089370] i8042: [1178] e8 -> i8042 (parameter)
[ 3.091996] i8042: [1178] fa <- i8042 (interrupt, 1, 12)
[ 3.092012] i8042: [1181] d4 -> i8042 (command)
[ 3.092227] i8042: [1181] 00 -> i8042 (parameter)
[ 3.094467] i8042: [1181] fa <- i8042 (interrupt, 1, 12)
[ 3.094483] i8042: [1184] d4 -> i8042 (command)
[ 3.094648] i8042: [1184] e8 -> i8042 (parameter)
[ 3.097145] i8042: [1184] fa <- i8042 (interrupt, 1, 12)
[ 3.097161] i8042: [1186] d4 -> i8042 (command)
[ 3.097427] i8042: [1186] 00 -> i8042 (parameter)
[ 3.099660] i8042: [1187] fa <- i8042 (interrupt, 1, 12)
[ 3.099675] i8042: [1189] d4 -> i8042 (command)
[ 3.099838] i8042: [1189] e9 -> i8042 (parameter)
[ 3.100250] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.102322] i8042: [1189] fa <- i8042 (interrupt, 1, 12)
[ 3.103328] i8042: [1192] 33 <- i8042 (interrupt, 1, 12)
[ 3.104331] i8042: [1193] cc <- i8042 (interrupt, 1, 12)
[ 3.105784] i8042: [1193] a3 <- i8042 (interrupt, 1, 12)
[ 3.105799] i8042: [1195] d4 -> i8042 (command)
[ 3.106067] i8042: [1195] f6 -> i8042 (parameter)
[ 3.108584] i8042: [1195] fa <- i8042 (interrupt, 1, 12)
[ 3.108600] i8042: [1198] d4 -> i8042 (command)
[ 3.108762] i8042: [1198] e8 -> i8042 (parameter)
[ 3.111662] i8042: [1198] fa <- i8042 (interrupt, 1, 12)
[ 3.111677] i8042: [1201] d4 -> i8042 (command)
[ 3.111945] i8042: [1201] 00 -> i8042 (parameter)
[ 3.114237] i8042: [1201] fa <- i8042 (interrupt, 1, 12)
[ 3.114254] i8042: [1204] d4 -> i8042 (command)
[ 3.114522] i8042: [1204] e6 -> i8042 (parameter)
[ 3.117199] i8042: [1204] fa <- i8042 (interrupt, 1, 12)
[ 3.117214] i8042: [1207] d4 -> i8042 (command)
[ 3.117378] i8042: [1207] e6 -> i8042 (parameter)
[ 3.119700] i8042: [1207] fa <- i8042 (interrupt, 1, 12)
[ 3.119715] i8042: [1209] d4 -> i8042 (command)
[ 3.119880] i8042: [1209] e6 -> i8042 (parameter)
[ 3.123090] i8042: [1209] fa <- i8042 (interrupt, 1, 12)
[ 3.123105] i8042: [1212] d4 -> i8042 (command)
[ 3.123320] i8042: [1212] e9 -> i8042 (parameter)
[ 3.125623] i8042: [1212] fa <- i8042 (interrupt, 1, 12)
[ 3.126956] i8042: [1215] 05 <- i8042 (interrupt, 1, 12)
[ 3.127832] i8042: [1216] 00 <- i8042 (interrupt, 1, 12)
[ 3.128715] i8042: [1216] 64 <- i8042 (interrupt, 1, 12)
[ 3.128731] i8042: [1218] d4 -> i8042 (command)
[ 3.128894] i8042: [1218] f6 -> i8042 (parameter)
[ 3.132087] i8042: [1218] fa <- i8042 (interrupt, 1, 12)
[ 3.132101] i8042: [1221] d4 -> i8042 (command)
[ 3.132265] i8042: [1221] f5 -> i8042 (parameter)
[ 3.134770] i8042: [1222] fa <- i8042 (interrupt, 1, 12)
[ 3.134786] i8042: [1224] d4 -> i8042 (command)
[ 3.134949] i8042: [1224] e6 -> i8042 (parameter)
[ 3.137759] i8042: [1224] fa <- i8042 (interrupt, 1, 12)
[ 3.137773] i8042: [1227] d4 -> i8042 (command)
[ 3.137935] i8042: [1227] e6 -> i8042 (parameter)
[ 3.140370] i8042: [1227] fa <- i8042 (interrupt, 1, 12)
[ 3.140385] i8042: [1230] d4 -> i8042 (command)
[ 3.140654] i8042: [1230] e6 -> i8042 (parameter)
[ 3.143061] i8042: [1230] fa <- i8042 (interrupt, 1, 12)
[ 3.143076] i8042: [1232] d4 -> i8042 (command)
[ 3.143291] i8042: [1232] e9 -> i8042 (parameter)
[ 3.145630] i8042: [1232] fa <- i8042 (interrupt, 1, 12)
[ 3.147022] i8042: [1235] 05 <- i8042 (interrupt, 1, 12)
[ 3.147898] i8042: [1236] 02 <- i8042 (interrupt, 1, 12)
[ 3.148782] i8042: [1236] 64 <- i8042 (interrupt, 1, 12)
[ 3.148796] i8042: [1238] d4 -> i8042 (command)
[ 3.148959] i8042: [1238] e8 -> i8042 (parameter)
[ 3.151988] PM: Checking hibernation image partition /dev/system/swap
[ 3.152061] i8042: [1241] fa <- i8042 (interrupt, 1, 12)
[ 3.152134] i8042: [1241] d4 -> i8042 (command)
[ 3.152298] i8042: [1242] 03 -> i8042 (parameter)
[ 3.154621] i8042: [1244] fa <- i8042 (interrupt, 1, 12)
[ 3.154707] i8042: [1244] d4 -> i8042 (command)
[ 3.154818] i8042: [1244] e6 -> i8042 (parameter)
[ 3.157874] i8042: [1247] fa <- i8042 (interrupt, 1, 12)
[ 3.157971] i8042: [1247] d4 -> i8042 (command)
[ 3.158134] i8042: [1247] e6 -> i8042 (parameter)
[ 3.160475] i8042: [1250] fa <- i8042 (interrupt, 1, 12)
[ 3.160558] i8042: [1250] d4 -> i8042 (command)
[ 3.160669] i8042: [1250] e6 -> i8042 (parameter)
[ 3.163664] i8042: [1253] fa <- i8042 (interrupt, 1, 12)
[ 3.163788] i8042: [1253] d4 -> i8042 (command)
[ 3.163900] i8042: [1253] e9 -> i8042 (parameter)
[ 3.167138] i8042: [1256] fa <- i8042 (interrupt, 1, 12)
[ 3.168005] i8042: [1257] 05 <- i8042 (interrupt, 1, 12)
[ 3.168892] i8042: [1258] 03 <- i8042 (interrupt, 1, 12)
[ 3.169776] i8042: [1259] 64 <- i8042 (interrupt, 1, 12)
[ 3.169856] i8042: [1259] d4 -> i8042 (command)
[ 3.169966] i8042: [1259] e8 -> i8042 (parameter)
[ 3.173330] i8042: [1263] fa <- i8042 (interrupt, 1, 12)
[ 3.173421] i8042: [1263] d4 -> i8042 (command)
[ 3.173639] i8042: [1263] 00 -> i8042 (parameter)
[ 3.175962] i8042: [1265] fa <- i8042 (interrupt, 1, 12)
[ 3.176044] i8042: [1265] d4 -> i8042 (command)
[ 3.176209] i8042: [1265] e6 -> i8042 (parameter)
[ 3.178726] i8042: [1268] fa <- i8042 (interrupt, 1, 12)
[ 3.178820] i8042: [1268] d4 -> i8042 (command)
[ 3.178931] i8042: [1268] e6 -> i8042 (parameter)
[ 3.181375] i8042: [1271] fa <- i8042 (interrupt, 1, 12)
[ 3.181499] i8042: [1271] d4 -> i8042 (command)
[ 3.182240] i8042: [1271] e6 -> i8042 (parameter)
[ 3.184747] i8042: [1274] fa <- i8042 (interrupt, 1, 12)
[ 3.184842] i8042: [1274] d4 -> i8042 (command)
[ 3.184954] i8042: [1274] e9 -> i8042 (parameter)
[ 3.187999] i8042: [1277] fa <- i8042 (interrupt, 1, 12)
[ 3.188866] i8042: [1278] 05 <- i8042 (interrupt, 1, 12)
[ 3.189767] i8042: [1279] 00 <- i8042 (interrupt, 1, 12)
[ 3.190756] i8042: [1280] 64 <- i8042 (interrupt, 1, 12)
[ 3.190841] i8042: [1280] d4 -> i8042 (command)
[ 3.190953] i8042: [1280] e1 -> i8042 (parameter)
[ 3.215928] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.237807] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.259900] hub 2-1:1.0: USB hub found
[ 3.281547] hub 2-1:1.0: 8 ports detected
[ 3.299961] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.389927] i8042: [1480] d4 -> i8042 (command)
[ 3.390091] i8042: [1480] 0a -> i8042 (parameter)
[ 3.398162] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[ 3.561936] usb 1-1.4: New USB device found, idVendor=0c45,
idProduct=642a
[ 3.583110] usb 1-1.4: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 3.589561] i8042: [1680] d4 -> i8042 (command)
[ 3.589671] i8042: [1680] f5 -> i8042 (parameter)
[ 3.604568] i8042: [1695] fa <- i8042 (interrupt, 1, 12)
[ 3.604573] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM
[ 3.604613] i8042: [1695] d4 -> i8042 (command)
[ 3.604725] i8042: [1695] f3 -> i8042 (parameter)
[ 3.626275] i8042: [1716] fa <- i8042 (interrupt, 1, 12)
[ 3.626278] usb 1-1.4: Manufacturer: CN0XRCWG724871ANS3CZA00
[ 3.626320] i8042: [1716] d4 -> i8042 (command)
[ 3.626484] i8042: [1716] 66 -> i8042 (parameter)
[ 3.648215] i8042: [1738] fe <- i8042 (interrupt, 1, 12)
[ 3.648259] i8042: [1738] d4 -> i8042 (command)
[ 3.648424] i8042: [1738] 88 -> i8042 (parameter)
[ 3.678465] i8042: [1769] d4 -> i8042 (command)
[ 3.678643] i8042: [1769] f3 -> i8042 (parameter)
[ 3.681134] i8042: [1771] fc <- i8042 (interrupt, 1, 12)
[ 3.681225] i8042: [1771] d4 -> i8042 (command)
[ 3.681336] i8042: [1771] f4 -> i8042 (parameter)
[ 3.684450] i8042: [1775] fa <- i8042 (interrupt, 1, 12)
[ 3.684574] i8042: [1775] d4 -> i8042 (command)
[ 3.684791] i8042: [1775] f6 -> i8042 (parameter)
[ 3.688413] i8042: [1779] fa <- i8042 (interrupt, 1, 12)
[ 3.688507] i8042: [1779] d4 -> i8042 (command)
[ 3.689512] i8042: [1779] ff -> i8042 (parameter)
[ 3.692089] i8042: [1782] fa <- i8042 (interrupt, 1, 12)
[ 3.726675] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[ 3.838521] usb 2-1.5: New USB device found, idVendor=8086,
idProduct=0189
[ 3.861231] usb 2-1.5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.892268] i8042: [1983] aa <- i8042 (interrupt, 1, 12)
[ 3.893135] i8042: [1984] 00 <- i8042 (interrupt, 1, 12)
[ 3.893215] i8042: [1984] d4 -> i8042 (command)
[ 3.893483] i8042: [1984] f3 -> i8042 (parameter)
[ 3.896588] i8042: [1987] fa <- i8042 (interrupt, 1, 12)
[ 3.896676] i8042: [1987] d4 -> i8042 (command)
[ 3.896787] i8042: [1987] c8 -> i8042 (parameter)
[ 3.899159] i8042: [1990] fa <- i8042 (interrupt, 1, 12)
[ 3.899238] i8042: [1990] d4 -> i8042 (command)
[ 3.899454] i8042: [1990] f3 -> i8042 (parameter)
[ 3.902540] i8042: [1993] fa <- i8042 (interrupt, 1, 12)
[ 3.902664] i8042: [1993] d4 -> i8042 (command)
[ 3.902775] i8042: [1993] 64 -> i8042 (parameter)
[ 3.905189] i8042: [1996] fa <- i8042 (interrupt, 1, 12)
[ 3.905283] i8042: [1996] d4 -> i8042 (command)
[ 3.905973] i8042: [1996] f3 -> i8042 (parameter)
[ 3.908560] i8042: [1999] fa <- i8042 (interrupt, 1, 12)
[ 3.908653] i8042: [1999] d4 -> i8042 (command)
[ 3.908765] i8042: [1999] 50 -> i8042 (parameter)
[ 3.911650] i8042: [2002] fa <- i8042 (interrupt, 1, 12)
[ 3.911743] i8042: [2002] d4 -> i8042 (command)
[ 3.911855] i8042: [2002] f2 -> i8042 (parameter)
[ 3.914438] i8042: [2005] fa <- i8042 (interrupt, 1, 12)
[ 3.915312] i8042: [2006] 03 <- i8042 (interrupt, 1, 12)
[ 3.915406] i8042: [2006] d4 -> i8042 (command)
[ 3.916096] i8042: [2006] f3 -> i8042 (parameter)
[ 3.918631] i8042: [2009] fa <- i8042 (interrupt, 1, 12)
[ 3.918752] i8042: [2009] d4 -> i8042 (command)
[ 3.918864] i8042: [2009] c8 -> i8042 (parameter)
[ 3.921832] i8042: [2012] fa <- i8042 (interrupt, 1, 12)
[ 3.921958] i8042: [2012] d4 -> i8042 (command)
[ 3.922122] i8042: [2012] f3 -> i8042 (parameter)
[ 3.924645] i8042: [2015] fa <- i8042 (interrupt, 1, 12)
[ 3.924738] i8042: [2015] d4 -> i8042 (command)
[ 3.924850] i8042: [2015] c8 -> i8042 (parameter)
[ 3.927376] i8042: [2018] fa <- i8042 (interrupt, 1, 12)
[ 3.927502] i8042: [2018] d4 -> i8042 (command)
[ 3.927667] i8042: [2018] f3 -> i8042 (parameter)
[ 3.930190] i8042: [2021] fa <- i8042 (interrupt, 1, 12)
[ 3.930313] i8042: [2021] d4 -> i8042 (command)
[ 3.931428] i8042: [2021] 50 -> i8042 (parameter)
[ 3.933733] i8042: [2024] fa <- i8042 (interrupt, 1, 12)
[ 3.933824] i8042: [2024] d4 -> i8042 (command)
[ 3.933936] i8042: [2024] f2 -> i8042 (parameter)
[ 3.936990] i8042: [2027] fa <- i8042 (interrupt, 1, 12)
[ 3.937836] i8042: [2028] 03 <- i8042 (interrupt, 1, 12)
[ 3.937931] i8042: [2028] d4 -> i8042 (command)
[ 3.938042] i8042: [2028] f3 -> i8042 (parameter)
[ 3.941461] i8042: [2032] fa <- i8042 (interrupt, 1, 12)
[ 3.941554] i8042: [2032] d4 -> i8042 (command)
[ 3.941770] i8042: [2032] c8 -> i8042 (parameter)
[ 3.944095] i8042: [2035] fa <- i8042 (interrupt, 1, 12)
[ 3.944219] i8042: [2035] d4 -> i8042 (command)
[ 3.944330] i8042: [2035] f3 -> i8042 (parameter)
[ 3.947216] i8042: [2038] fa <- i8042 (interrupt, 1, 12)
[ 3.947324] i8042: [2038] d4 -> i8042 (command)
[ 3.947488] i8042: [2038] 64 -> i8042 (parameter)
[ 3.949809] i8042: [2040] fa <- i8042 (interrupt, 1, 12)
[ 3.949903] i8042: [2040] d4 -> i8042 (command)
[ 3.950015] i8042: [2040] f3 -> i8042 (parameter)
[ 3.952817] i8042: [2043] fa <- i8042 (interrupt, 1, 12)
[ 3.952941] i8042: [2043] d4 -> i8042 (command)
[ 3.953053] i8042: [2043] 50 -> i8042 (parameter)
[ 3.955464] i8042: [2046] fa <- i8042 (interrupt, 1, 12)
[ 3.955589] i8042: [2046] d4 -> i8042 (command)
[ 3.955753] i8042: [2046] f2 -> i8042 (parameter)
[ 3.958834] i8042: [2049] fa <- i8042 (interrupt, 1, 12)
[ 3.959841] i8042: [2050] 03 <- i8042 (interrupt, 1, 12)
[ 3.959980] i8042: [2051] d4 -> i8042 (command)
[ 3.960092] i8042: [2051] f3 -> i8042 (parameter)
[ 3.963087] i8042: [2054] fa <- i8042 (interrupt, 1, 12)
[ 3.963213] i8042: [2054] d4 -> i8042 (command)
[ 3.963378] i8042: [2054] 64 -> i8042 (parameter)
[ 3.965850] i8042: [2056] fa <- i8042 (interrupt, 1, 12)
[ 3.965945] i8042: [2056] d4 -> i8042 (command)
[ 3.966056] i8042: [2056] e8 -> i8042 (parameter)
[ 3.968700] i8042: [2059] fa <- i8042 (interrupt, 1, 12)
[ 3.968794] i8042: [2059] d4 -> i8042 (command)
[ 3.968959] i8042: [2059] 03 -> i8042 (parameter)
[ 3.971304] i8042: [2062] fa <- i8042 (interrupt, 1, 12)
[ 3.971398] i8042: [2062] d4 -> i8042 (command)
[ 3.974350] i8042: [2062] e6 -> i8042 (parameter)
[ 3.976879] i8042: [2067] fa <- i8042 (interrupt, 1, 12)
[ 3.977018] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input1
[ 4.000810] i8042: [2091] d4 -> i8042 (command)
[ 4.000921] i8042: [2091] f4 -> i8042 (parameter)
[ 4.003458] i8042: [2094] fa <- i8042 (interrupt, 1, 12)
[ 4.003598] PM: Hibernation image not present or could not be loaded.
[ 4.003620] registered taskstats version 1
[ 4.035412] Magic number: 7:990:357
[ 4.059596] rtc_cmos 00:05: setting system clock to 2011-12-27
01:23:24 UTC (1324949004)
[ 4.085662] Freeing unused kernel memory: 944k freed
[ 4.110469] Write protecting the kernel read-only data: 12288k
[ 4.135741] Freeing unused kernel memory: 192k freed
[ 4.164739] Freeing unused kernel memory: 1944k freed
[ 4.241203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.266531] shpchp: shpcd_init: pci_register_driver = 0
[ 4.266533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.322294] udevd[131]: starting version 173
[ 4.356829] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.393554] ACPI: Power Button [PWRB]
[ 4.393740] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.393743] ACPI: Thermal Zone [TZ00] (54 C)
[ 4.393978] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.393981] ACPI: Thermal Zone [TZ01] (54 C)
[ 4.522579] pci_irq-0373 [00] pci_irq_lookup : Found
0000:04:00.0[A] _PRT entry
[ 4.522586] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 4.522610] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 4.522615] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 4.522627] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 3
[ 4.522834] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000
[ 4.522906] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 4.522913] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 4.522918] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 4.522924] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 4.522929] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 4.523002] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 4.523043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.523045] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.523047] usb usb3: Product: xHCI Host Controller
[ 4.523049] usb usb3: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd
[ 4.523050] usb usb3: SerialNumber: 0000:04:00.0
[ 4.523265] xHCI xhci_add_endpoint called for root hub
[ 4.523267] xHCI xhci_check_bandwidth called for root hub
[ 4.523328] hub 3-0:1.0: USB hub found
[ 4.523339] hub 3-0:1.0: 2 ports detected
[ 4.523379] ACPI: Sleep Button [SLPB]
[ 4.523426] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 4.523478] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 4.523488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 4
[ 4.524286] ACPI: Lid Switch [LID0]
[ 4.524340] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.524373] ACPI: Power Button [PWRF]
[ 4.526215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.526218] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.526220] usb usb4: Product: xHCI Host Controller
[ 4.526222] usb usb4: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd
[ 4.526223] usb usb4: SerialNumber: 0000:04:00.0
[ 4.526375] xHCI xhci_add_endpoint called for root hub
[ 4.526377] xHCI xhci_check_bandwidth called for root hub
[ 4.526439] hub 4-0:1.0: USB hub found
[ 4.526448] hub 4-0:1.0: 2 ports detected
[ 4.526942] [drm] Initialized drm 1.1.0 20060810
[ 4.531282] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:02.0[A] _PRT entry
[ 4.531289] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.531292] i915 0000:00:02.0: setting latency timer to 64
[ 5.368663] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 5.368666] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.368667] [drm] Driver supports precise vblank timestamp query.
[ 5.378777] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call
failed
[ 5.378819] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call
failed
[ 5.378837] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.378839] vgaarb: transferring owner from PCI:0000:00:02.0 to
PCI:0000:01:00.0
[ 5.569660] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 5.609793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.621761] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.633738] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.638365] usb 3-1: New USB device found, idVendor=04ca, idProduct=0027
[ 5.642881] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.647346] usb 3-1: Product: USB Multimedia Keyboard
[ 5.651787] usb 3-1: Manufacturer: Lite-On Technology Corp.
[ 5.656387] usb 3-1: ep 0x81 - rounding interval to 128 microframes,
ep desc says 192 microframes
[ 5.660984] usb 3-1: ep 0x82 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 5.680911] input: Lite-On Technology Corp. USB Multimedia Keyboard
as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input6
[ 5.685919] generic-usb 0003:04CA:0027.0001: input,hidraw0: USB HID
v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on
usb-0000:04:00.0-1/input0
[ 5.721562] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.728628] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.735543] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.740403] input: Lite-On Technology Corp. USB Multimedia Keyboard
as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input7
[ 5.745533] generic-usb 0003:04CA:0027.0002: input,hiddev0,hidraw1:
USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard]
on usb-0000:04:00.0-1/input1
[ 5.857203] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 5.876155] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.881610] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.886481] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608
[ 5.891212] usb 3-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 5.895947] usb 3-2: Product: USB2.0 Hub
[ 5.901665] hub 3-2:1.0: USB hub found
[ 5.906793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.911512] hub 3-2:1.0: 4 ports detected
[ 5.945622] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000)
[ 5.945624] fb: conflicting fb hw usage inteldrmfb vs VESA VGA -
removing generic driver
[ 5.950427] Console: switching to colour dummy device 80x25
[ 5.951515] fbcon: inteldrmfb (fb0) is primary device
[ 6.186212] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 6.200498] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.201158] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.201314] usb 3-2.4: New USB device found, idVendor=05e3,
idProduct=0608
[ 6.201321] usb 3-2.4: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 6.201327] usb 3-2.4: Product: USB2.0 Hub
[ 6.202290] hub 3-2.4:1.0: USB hub found
[ 6.202750] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.202925] hub 3-2.4:1.0: 4 ports detected
[ 6.313235] Console: switching to colour frame buffer device 236x63
[ 6.334979] fb0: inteldrmfb frame buffer device
[ 6.335054] drm: registered panic notifier
[ 6.335313] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 6.338677] acpi device:2e: registered as cooling_device4
[ 6.338816] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input8
[ 6.339007] ACPI: Video Device [PEGP] (multi-head: yes rom: yes
post: no)
[ 6.343258] acpi device:32: registered as cooling_device5
[ 6.343536] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 6.343717] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 6.343857] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 6.402163] Btrfs loaded
[ 6.443076] md: linear personality registered for level -1
[ 6.478910] device-mapper: uevent: version 1.0.3
[ 6.479053] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 6.482774] usb 3-2.4.4: new low-speed USB device number 5 using xhci_hcd
[ 6.501092] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.503088] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.504086] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.504375] usb 3-2.4.4: New USB device found, idVendor=046d,
idProduct=c063
[ 6.509607] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.514763] usb 3-2.4.4: Product: DELL USB Laser Mouse
[ 6.519906] usb 3-2.4.4: Manufacturer: DELL
[ 6.525207] usb 3-2.4.4: ep 0x81 - rounding interval to 64
microframes, ep desc says 80 microframes
[ 6.536487] input: DELL DELL USB Laser Mouse as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/input/input10
[ 6.542117] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID
v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:04:00.0-2.4.4/input0
[ 39.516864] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 39.516868] PM: Marking nosave pages: 00000000b5a28000 - 00000000b6e29000
[ 39.516926] PM: Marking nosave pages: 00000000b886a000 - 00000000b8ab3000
[ 39.516934] PM: Marking nosave pages: 00000000bac8f000 - 00000000bafff000
[ 39.516945] PM: Marking nosave pages: 00000000bb000000 - 0000000100000000
[ 39.517655] PM: Basic memory bitmaps created
[ 39.540690] PM: Basic memory bitmaps freed
[ 39.540694] video LNXVIDEO:00: Restoring backlight state
[ 39.540695] video LNXVIDEO:01: Restoring backlight state
[ 39.590164] PM: Starting manual resume from disk
[ 39.595666] PM: Hibernation image partition 253:3 present
[ 39.595669] PM: Looking for hibernation image.
[ 39.597171] PM: Image not found (code -22)
[ 39.597173] PM: Hibernation image not present or could not be loaded.
[ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1
transid 21081 /dev/mapper/system-root
[ 39.616353] btrfs: turning off barriers
[ 39.616356] btrfs: enabling auto defrag
[ 39.616357] btrfs: use lzo compression
[ 39.616358] btrfs: disk space caching is enabled
[ 39.661102] Btrfs detected SSD devices, enabling SSD mode
[ 40.401467] btrfs: turning off barriers
[ 40.407291] btrfs: enabling auto defrag
[ 40.407352] btrfs: use lzo compression
[ 40.418719] btrfs: disk space caching is enabled
[ 40.683437] systemd[1]: systemd 37 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 40.731811] systemd[1]: Set hostname to <xps15z.cristianrodriguez.net>.
[ 41.272117] udevd[606]: starting version 173
[ 41.435290] mei: module is from the staging directory, the quality is
unknown, you have been warned.
[ 41.435823] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:16.0[A] _PRT entry
[ 41.435829] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 41.435834] mei 0000:00:16.0: setting latency timer to 64
[ 41.435901] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 41.473031] iTCO_vendor_support: vendor-support=0
[ 41.477614] pci_irq-0373 [00] pci_irq_lookup : Found
0000:06:00.0[A] _PRT entry
[ 41.477622] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 41.477633] atl1c 0000:06:00.0: setting latency timer to 64
[ 41.487779] mtp-probe[752]: checking bus 3, device 2:
"/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1"
[ 41.497929] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1f.3[C] _PRT entry
[ 41.497940] IOAPIC[0]: Set routing entry (2-18 -> 0xb9 -> IRQ 18
Mode:1 Active:1 Dest:1)
[ 41.497946] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B9 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 41.497951] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 41.503468] mtp-probe[752]: bus: 3, device: 2 was not an MTP device
[ 41.508295] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 41.508873] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 41.528598] mtp-probe[776]: checking bus 3, device 5:
"/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4"
[ 41.533704] mtp-probe[776]: bus: 3, device: 5 was not an MTP device
[ 41.538647] btrfs: turning off barriers
[ 41.538650] btrfs: enabling auto defrag
[ 41.538653] btrfs: use lzo compression
[ 41.538653] btrfs: disk space caching is enabled
[ 41.559847] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 41.568681] mtp-probe[794]: checking bus 1, device 3:
"/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4"
[ 41.570805] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 41.578853] mtp-probe[794]: bus: 1, device: 3 was not an MTP device
[ 41.587647] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[ 41.593026] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 41.597648] Bluetooth: Core ver 2.16
[ 41.603983] NET: Registered protocol family 31
[ 41.608008] ACPI: AC Adapter [ADP0] (on-line)
[ 41.614610] Bluetooth: HCI device and connection manager initialized
[ 41.614613] Bluetooth: HCI socket layer initialized
[ 41.614615] Bluetooth: L2CAP socket layer initialized
[ 41.614622] Bluetooth: SCO socket layer initialized
[ 41.640484] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 41.643741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 41.646724] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 41.654637] microcode: Microcode Update Driver: v2.00
<tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[ 41.676921] ACPI: Deprecated procfs I/F for battery is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 41.681836] ACPI: Battery Slot [BAT0] (battery present)
[ 41.687239] wmi: Mapper loaded
[ 41.693494] Linux video capture interface: v2.00
[ 41.701454] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 41.701861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 41.701932] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 41.702023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 41.702161] usbcore: registered new interface driver btusb
[ 41.731287] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda caddy
[ 41.731291] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 41.733075] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 41.742658] cfg80211: Calling CRDA to update world regulatory domain
[ 41.755562] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 41.766095] uvcvideo: Found UVC 1.00 device
Laptop_Integrated_Webcam_2HDM (0c45:642a)
[ 41.772757] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 41.778771] Copyright(c) 2003-2011 Intel Corporation
[ 41.778833] input: Laptop_Integrated_Webcam_2HDM as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[ 41.778960] usbcore: registered new interface driver uvcvideo
[ 41.778962] USB Video Class driver (1.1.1)
[ 41.802479] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1b.0[A] _PRT entry
[ 41.807306] pci_irq-0373 [00] pci_irq_lookup : Found
0000:03:00.0[A] _PRT entry
[ 41.807313] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 41.807344] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 41.807397] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 41.807399] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057fc000
[ 41.807401] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 41.807630] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X
[ 41.807715] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R)
Advanced-N 6230 AGN, REV=0xB0
[ 41.807861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 41.823275] iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 41.823278] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 41.823280] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 41.823300] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[ 41.829386] ifup[893]: Service network not started and mode 'auto' ->
skipping
[ 41.852847] cfg80211: World regulatory domain updated:
[ 41.852849] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 41.852850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.852852] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 41.852853] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 41.852854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.852855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.920210] IOAPIC[0]: Set routing entry (2-22 -> 0xc9 -> IRQ 22
Mode:1 Active:1 Dest:1)
[ 41.920216] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:C9 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 41.920221] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 41.920290] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 41.920313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 41.920845] input: Dell WMI hotkeys as /devices/virtual/input/input13
[ 41.940703] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.1
build 33993
[ 41.940849] Registered led device: phy0-led
[ 41.964426] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 42.010557] ifup[964]: Service network not started and mode 'auto' ->
skipping
[ 42.174781] Adding 2097148k swap on /dev/mapper/system-swap.
Priority:0 extents:1 across:2097148k SS
[ 44.925951] ALSA hda_intel.c:812 azx_get_response timeout, switching
to polling mode: last cmd=0x000f0000
[ 45.437474] ALSA patch_realtek.c:1261 SKU: Nid=0x1d sku_cfg=0x40179a2d
[ 45.437477] ALSA patch_realtek.c:1263 SKU: port_connectivity=0x1
[ 45.437478] ALSA patch_realtek.c:1264 SKU: enable_pcbeep=0x1
[ 45.437480] ALSA patch_realtek.c:1265 SKU: check_sum=0x00000007
[ 45.437481] ALSA patch_realtek.c:1266 SKU: customization=0x0000009a
[ 45.437482] ALSA patch_realtek.c:1267 SKU: external_amp=0x5
[ 45.437483] ALSA patch_realtek.c:1268 SKU: platform_type=0x1
[ 45.437485] ALSA patch_realtek.c:1269 SKU: swap=0x0
[ 45.437486] ALSA patch_realtek.c:1270 SKU: override=0x1
[ 45.437895] ALSA hda_codec.c:4951 autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 45.437897] ALSA hda_codec.c:4955 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 45.437899] ALSA hda_codec.c:4959 hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 45.437900] ALSA hda_codec.c:4960 mono: mono_out=0x0
[ 45.437901] ALSA hda_codec.c:4964 inputs:
[ 45.437903] ALSA hda_codec.c:4968 Internal Mic=0x12
[ 45.437904] ALSA hda_codec.c:4968 Mic=0x18
[ 45.437905] ALSA hda_codec.c:4970
[ 45.439163] ALSA patch_realtek.c:1324 realtek: No valid SSID,
checking pincfg 0x40179a2d for NID 0x1d
[ 45.439165] ALSA patch_realtek.c:1340 realtek: Enabling init
ASM_ID=0x9a2d CODEC_ID=10ec0269
[ 45.443482] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 45.448591] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 45.453689] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 45.458609] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 45.710010] systemd-cryptsetup[1010]: Volume cr_sda2 already active.
[ 45.787497] systemd-fsck[1005]: /dev/sda1: limpio, 63/40000 ficheros,
137097/159744 bloques
[ 45.824455] device fsid 403609d3-a44c-4bb6-99c4-8be5430433e7 devid 1
transid 22126 /dev/mapper/system-home
[ 45.829949] btrfs: turning off barriers
[ 45.834896] btrfs: enabling auto defrag
[ 45.834957] btrfs: use lzo compression
[ 45.840735] EXT4-fs (sda1): barriers disabled
[ 45.849518] btrfs: disk space caching is enabled
[ 45.854628] EXT4-fs (sda1): mounted filesystem with writeback data
mode. Opts: acl,barrier=0,data=writeback,user_xattr
[ 45.869431] Btrfs detected SSD devices, enabling SSD mode
[ 47.174579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.174581] Bluetooth: BNEP filters: protocol multicast
[ 47.205249] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 47.215832] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 47.337233] Bluetooth: RFCOMM TTY layer initialized
[ 47.337238] Bluetooth: RFCOMM socket layer initialized
[ 47.337239] Bluetooth: RFCOMM ver 1.11
[ 47.505097] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 47.511590] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 47.635461] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X
[ 47.635523] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps
Full Duplex>
[ 47.648775] NET: Registered protocol family 17
[ 48.961311] EXT4-fs (sda1): re-mounted. Opts:
acl,barrier=0,data=writeback,user_xattr,commit=0
[ 96.852567] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 96.855107] wlan0: authenticated
[ 96.896863] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 96.903865] wlan0: RX AssocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 96.903869] wlan0: associated
[ 106.895705] wlan0: disassociating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 106.909897] cfg80211: Calling CRDA to update world regulatory domain
[ 106.912356] cfg80211: World regulatory domain updated:
[ 106.912359] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 106.912361] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 106.912363] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 106.912365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 106.912366] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 106.912367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 110.146828] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 110.149314] wlan0: authenticated
[ 110.154157] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 110.159155] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 110.159157] wlan0: associated
[ 120.042706] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 120.054236] cfg80211: Calling CRDA to update world regulatory domain
[ 120.056757] cfg80211: World regulatory domain updated:
[ 120.056761] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 120.056763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 120.056764] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 120.056766] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 120.056767] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 120.056769] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 138.190818] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 138.193402] wlan0: authenticated
[ 138.196754] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 138.201826] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 138.201840] wlan0: associated
[ 148.192646] wlan0: disassociating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 148.206339] cfg80211: Calling CRDA to update world regulatory domain
[ 148.208741] cfg80211: World regulatory domain updated:
[ 148.208744] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 148.208746] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 148.208748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 148.208749] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 148.208751] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 148.208752] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 151.443088] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 151.445498] wlan0: authenticated
[ 151.446657] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 151.451688] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 151.451691] wlan0: associated
[ 159.980012] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 159.992768] cfg80211: Calling CRDA to update world regulatory domain
[ 159.995101] cfg80211: World regulatory domain updated:
[ 159.995104] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 159.995106] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 159.995108] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 159.995109] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 159.995111] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 159.995112] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 172.519660] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 172.522038] wlan0: authenticated
[ 172.525229] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 172.530226] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 172.530229] wlan0: associated
root@xps15z:/home/crrodriguez # systemctl restart NetworkManager.service
root@xps15z:/home/crrodriguez # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc6-3-desktop (geeko@buildhost) (gcc
version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Dec 22 15:05:54 UTC 2011
(c4246bf)
[ 0.000000] Command line:
root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9
resume=/dev/system/swap splash=verbose clocksource=hpet hpet64
ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug
i8042.debug vga=0x31b
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5a28000 (usable)
[ 0.000000] BIOS-e820: 00000000b5a28000 - 00000000b6e29000 (reserved)
[ 0.000000] BIOS-e820: 00000000b6e29000 - 00000000b886a000 (usable)
[ 0.000000] BIOS-e820: 00000000b886a000 - 00000000b8ab3000 (reserved)
[ 0.000000] BIOS-e820: 00000000b8ab3000 - 00000000bac8f000 (usable)
[ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad2e000 (reserved)
[ 0.000000] BIOS-e820: 00000000bad2e000 - 00000000bad3d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bad3d000 - 00000000badfb000 (reserved)
[ 0.000000] BIOS-e820: 00000000badfb000 - 00000000badfd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000badfd000 - 00000000badff000 (reserved)
[ 0.000000] BIOS-e820: 00000000badff000 - 00000000bae02000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae02000 - 00000000bae0a000 (reserved)
[ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved)
[ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/00WW5M, BIOS
A08 12/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] Scan SMP from ffff88000009d800 for 1024 bytes.
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[ 0.000000] 0000000000 - 00bb000000 page 2M
[ 0.000000] kernel direct mapping tables up to bb000000 @
1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
[ 0.000000] 0100000000 - 023fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 23fe00000 @
bac85000-bac8f000
[ 0.000000] RAMDISK: 373d9000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09
00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000baff3000 08A57 (v02 DELL SNB-CPT
00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf40000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09
00000002 LOHR 00000001)
[ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc
00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl
00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafeb000 00846 (v01 PmRef Cpu0Ist
00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm
00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF
00000001 PTL 00000001)
[ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB
00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
[ 0.000000] NODE_DATA [000000023fdec000 - 000000023fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD ->
[ffff880237400000-ffff88023e3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000b5a28
[ 0.000000] 0: 0x000b6e29 -> 0x000b886a
[ 0.000000] 0: 0x000b8ab3 -> 0x000bac8f
[ 0.000000] 0: 0x000bafff -> 0x000bb000
[ 0.000000] 0: 0x00100000 -> 0x0023fe00
[ 0.000000] On node 0 totalpages: 2069459
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 740990 pages, LIFO batch:31
[ 0.000000] Normal zone: 17913 pages used for memmap
[ 0.000000] Normal zone: 1292295 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2,
APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2,
APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2,
APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2,
APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2,
APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2,
APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2,
APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2,
APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2,
APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2,
APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2,
APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2,
APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2,
APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2,
APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2,
APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b5a28000 -
00000000b6e29000
[ 0.000000] PM: Registered nosave memory: 00000000b886a000 -
00000000b8ab3000
[ 0.000000] PM: Registered nosave memory: 00000000bac8f000 -
00000000bad2e000
[ 0.000000] PM: Registered nosave memory: 00000000bad2e000 -
00000000bad3d000
[ 0.000000] PM: Registered nosave memory: 00000000bad3d000 -
00000000badfb000
[ 0.000000] PM: Registered nosave memory: 00000000badfb000 -
00000000badfd000
[ 0.000000] PM: Registered nosave memory: 00000000badfd000 -
00000000badff000
[ 0.000000] PM: Registered nosave memory: 00000000badff000 -
00000000bae02000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 -
00000000bae0a000
[ 0.000000] PM: Registered nosave memory: 00000000bae0a000 -
00000000bae1b000
[ 0.000000] PM: Registered nosave memory: 00000000bae1b000 -
00000000baf18000
[ 0.000000] PM: Registered nosave memory: 00000000baf18000 -
00000000baf1c000
[ 0.000000] PM: Registered nosave memory: 00000000baf1c000 -
00000000baf1f000
[ 0.000000] PM: Registered nosave memory: 00000000baf1f000 -
00000000baf9f000
[ 0.000000] PM: Registered nosave memory: 00000000baf9f000 -
00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 -
00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 -
00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 -
00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 -
00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap:
bfa00000:38600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79744
r8192 d22656 u262144
[ 0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2037205
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9
resume=/dev/system/swap splash=verbose clocksource=hpet hpet64
ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug
i8042.debug vga=0x31b
[ 0.000000] bootsplash: verbose mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8067344k/9435136k available (5935k kernel code,
1157300k absent, 210492k reserved, 7648k data, 944k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet timer0 configured in 64-bit mode
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2793.229 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5586.45 BogoMIPS (lpj=2793229)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000037] Security Framework initialized
[ 0.000049] AppArmor: AppArmor initialized
[ 0.000647] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.002144] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.002776] Mount-cache hash table entries: 256
[ 0.002859] Initializing cgroup subsys cpuacct
[ 0.002863] Initializing cgroup subsys memory
[ 0.002877] Initializing cgroup subsys devices
[ 0.002880] Initializing cgroup subsys freezer
[ 0.002882] Initializing cgroup subsys net_cls
[ 0.002884] Initializing cgroup subsys blkio
[ 0.002890] Initializing cgroup subsys perf_event
[ 0.002912] Disabled fast string operations
[ 0.002915] CPU: Physical Processor ID: 0
[ 0.002917] CPU: Processor Core ID: 0
[ 0.002921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002922] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.002927] mce: CPU supports 7 MCE banks
[ 0.002936] CPU0: Thermal monitoring handled by SMI
[ 0.002941] using mwait in idle threads.
[ 0.003584] ACPI: Core revision 20110623
[ 0.059768] Getting VERSION: 1060015
[ 0.059771] Getting VERSION: 1060015
[ 0.059773] Getting ID: 0
[ 0.059774] Getting ID: 0
[ 0.059783] DMAR: Host address width 36
[ 0.059786] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.059792] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
c0000020e60262 ecap f0101a
[ 0.059796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.059801] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
c9008020660262 ecap f0105a
[ 0.059804] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff
[ 0.059807] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
[ 0.059879] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.059881] HPET id 0 under DRHD base 0xfed91000
[ 0.059884] HPET id 0 under DRHD base 0xfed91000
[ 0.059886] HPET id 0 under DRHD base 0xfed91000
[ 0.059888] HPET id 0 under DRHD base 0xfed91000
[ 0.059890] HPET id 0 under DRHD base 0xfed91000
[ 0.059892] HPET id 0 under DRHD base 0xfed91000
[ 0.059894] HPET id 0 under DRHD base 0xfed91000
[ 0.059896] HPET id 0 under DRHD base 0xfed91000
[ 0.060143] Enabled IRQ remapping in x2apic mode
[ 0.060146] Enabling x2apic
[ 0.060148] Enabled x2apic
[ 0.060153] Switched APIC routing to cluster x2apic.
[ 0.060158] enabled ExtINT on CPU#0
[ 0.060404] ESR value before enabling vector: 0x00000080 after:
0x00000000
[ 0.060421] ENABLING IO-APIC IRQs
[ 0.060423] init IO_APIC IRQs
[ 0.060424] apic 2 pin 0 not connected
[ 0.060427] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.060431] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060436] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0
Active:0 Dest:1)
[ 0.060439] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060443] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0
Active:0 Dest:1)
[ 0.060446] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:33 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060450] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:1)
[ 0.060453] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060457] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0
Active:0 Dest:1)
[ 0.060460] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:35 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060465] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:1)
[ 0.060467] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:36 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060472] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:1)
[ 0.060475] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:37 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060479] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.060482] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060486] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1
Active:0 Dest:1)
[ 0.060489] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060493] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10
Mode:0 Active:0 Dest:1)
[ 0.060496] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3A Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060500] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11
Mode:0 Active:0 Dest:1)
[ 0.060503] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3B Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060507] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12
Mode:0 Active:0 Dest:1)
[ 0.060510] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060514] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13
Mode:0 Active:0 Dest:1)
[ 0.060517] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060521] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14
Mode:0 Active:0 Dest:1)
[ 0.060524] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3E Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060528] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15
Mode:0 Active:0 Dest:1)
[ 0.060531] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3F Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060535] apic 2 pin 16 not connected
[ 0.060536] apic 2 pin 17 not connected
[ 0.060537] apic 2 pin 18 not connected
[ 0.060538] apic 2 pin 19 not connected
[ 0.060538] apic 2 pin 20 not connected
[ 0.060539] apic 2 pin 21 not connected
[ 0.060540] apic 2 pin 22 not connected
[ 0.060541] apic 2 pin 23 not connected
[ 0.060679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070666] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.070671] Using local APIC timer interrupts.
[ 0.070671] calibrating APIC timer ...
[ 0.172123] ... lapic delta = 623574
[ 0.172125] ... PM-Timer delta = 357949
[ 0.172126] ... PM-Timer result ok
[ 0.172128] ..... delta 623574
[ 0.172130] ..... mult: 26786370
[ 0.172132] ..... calibration result: 99771
[ 0.172134] ..... CPU clock speed is 2793.0611 MHz.
[ 0.172136] ..... host bus clock speed is 99.0771 MHz.
[ 0.172144] Performance Events: PEBS fmt1+, SandyBridge events, Intel
PMU driver.
[ 0.172150] PEBS disabled due to CPU errata.
[ 0.172154] ... version: 3
[ 0.172155] ... bit width: 48
[ 0.172157] ... generic registers: 4
[ 0.172159] ... value mask: 0000ffffffffffff
[ 0.172162] ... max period: 000000007fffffff
[ 0.172164] ... fixed-purpose events: 3
[ 0.172166] ... event mask: 000000070000000f
[ 0.180330] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.188150] Booting Node 0, Processors #1
[ 0.188160] smpboot cpu 1: start_ip = 98000
[ 0.199162] masked ExtINT on CPU#1
[ 0.259011] Disabled fast string operations
[ 0.259023] CPU1: Thermal monitoring handled by SMI
[ 0.279047] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.285004] #2
[ 0.285010] smpboot cpu 2: start_ip = 98000
[ 0.296013] masked ExtINT on CPU#2
[ 0.355853] Disabled fast string operations
[ 0.355864] CPU2: Thermal monitoring handled by SMI
[ 0.375921] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.381847] #3
[ 0.381852] smpboot cpu 3: start_ip = 98000
[ 0.392852] masked ExtINT on CPU#3
[ 0.452696] Disabled fast string operations
[ 0.452707] CPU3: Thermal monitoring handled by SMI
[ 0.472765] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.474664] Brought up 4 CPUs
[ 0.474673] Total of 4 processors activated (22346.24 BogoMIPS).
[ 0.478171] devtmpfs: initialized
[ 0.478919] PM: Registering ACPI NVS region at bad2e000 (61440 bytes)
[ 0.478924] PM: Registering ACPI NVS region at badfb000 (8192 bytes)
[ 0.478927] PM: Registering ACPI NVS region at badff000 (12288 bytes)
[ 0.478930] PM: Registering ACPI NVS region at bae0a000 (69632 bytes)
[ 0.478934] PM: Registering ACPI NVS region at baf18000 (16384 bytes)
[ 0.478938] PM: Registering ACPI NVS region at baf1f000 (524288 bytes)
[ 0.479061] print_constraints: dummy:
[ 0.479091] RTC time: 1:23:20, date: 12/27/11
[ 0.479128] NET: Registered protocol family 16
[ 0.479269] ACPI: bus type pci registered
[ 0.479329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.479334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.489012] PCI: Using configuration type 1 for base access
[ 0.489769] bio: create slab <bio-0> at 0
[ 0.489840] ACPI: Added _OSI(Module Device)
[ 0.489843] ACPI: Added _OSI(Processor Device)
[ 0.489846] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489848] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.491351] ACPI: EC: Look up EC in DSDT
[ 0.492860] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.499730] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.500574] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst
00003001 INTL 20061109)
[ 0.500979] ACPI: Dynamic OEM Table Load:
[ 0.500982] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst
00003001 INTL 20061109)
[ 0.506049] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst
00003000 INTL 20061109)
[ 0.506495] ACPI: Dynamic OEM Table Load:
[ 0.506498] ACPI: SSDT (null) 00303 (v01 PmRef ApIst
00003000 INTL 20061109)
[ 0.508778] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst
00003000 INTL 20061109)
[ 0.509171] ACPI: Dynamic OEM Table Load:
[ 0.509173] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20061109)
[ 0.514717] ACPI: Interpreter enabled
[ 0.514722] ACPI: (supports S0 S3 S4 S5)
[ 0.514744] ACPI: Using IOAPIC for interrupt routing
[ 0.520280] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.520446] ACPI: No dock devices found.
[ 0.520448] HEST: Table not found.
[ 0.520451] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.520852] \_SB_.PCI0:_OSC invalid UUID
[ 0.520853] _OSC request data:1 8 1f
[ 0.520856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.521533] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.521537] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.521540] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.521544] pci_root PNP0A08:00: host bridge window [mem
0xbfa00000-0xfeafffff]
[ 0.521548] pci_root PNP0A08:00: host bridge window [mem
0xfed40000-0xfed44fff]
[ 0.521559] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.521591] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.521611] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.521613] pci 0000:00:01.0: PME# disabled
[ 0.521630] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[ 0.521639] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.521644] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.521648] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.521692] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.521714] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit]
[ 0.521774] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.521778] pci 0000:00:16.0: PME# disabled
[ 0.521808] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.521828] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff]
[ 0.521898] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.521902] pci 0000:00:1a.0: PME# disabled
[ 0.521925] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.521939] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit]
[ 0.521991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.521994] pci 0000:00:1b.0: PME# disabled
[ 0.522016] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.522075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.522079] pci 0000:00:1c.0: PME# disabled
[ 0.522103] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.522162] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.522166] pci 0000:00:1c.1: PME# disabled
[ 0.522190] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.522249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.522253] pci 0000:00:1c.3: PME# disabled
[ 0.522277] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.522335] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.522339] pci 0000:00:1c.4: PME# disabled
[ 0.522363] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 0.522422] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.522426] pci 0000:00:1c.5: PME# disabled
[ 0.522455] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.522475] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff]
[ 0.522544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.522548] pci 0000:00:1d.0: PME# disabled
[ 0.522571] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
[ 0.522685] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 0.522702] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.522710] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.522717] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.522725] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.522732] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.522740] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff]
[ 0.522770] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.522774] pci 0000:00:1f.2: PME# disabled
[ 0.522791] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.522805] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit]
[ 0.522826] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.522875] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300
[ 0.522882] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[ 0.522890] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.522898] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff
64bit pref]
[ 0.522903] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.522909] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.524596] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.524609] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.524616] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.524626] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 0.524698] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.524908] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280
[ 0.525049] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit]
[ 0.525618] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.525652] pci 0000:03:00.0: PME# disabled
[ 0.527703] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.527711] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff]
[ 0.527783] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
[ 0.527808] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit]
[ 0.527912] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.527917] pci 0000:04:00.0: PME# disabled
[ 0.529595] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.529614] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff]
[ 0.529692] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.529700] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.529769] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200
[ 0.529796] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit]
[ 0.529810] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f]
[ 0.529905] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.529910] pci 0000:06:00.0: PME# disabled
[ 0.531592] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.531606] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.531617] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.531674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.531763] 0000:00:1f[A] -> [21]
[ 0.531766] 0000:00:1f[B] -> [19]
[ 0.531769] 0000:00:1f[C] -> [18]
[ 0.531771] 0000:00:1f[D] -> [16]
[ 0.531773] 0000:00:1d[A] -> [23]
[ 0.531776] 0000:00:1a[A] -> [16]
[ 0.531778] 0000:00:1b[A] -> [22]
[ 0.531781] 0000:00:16[A] -> [16]
[ 0.531783] 0000:00:16[B] -> [19]
[ 0.531785] 0000:00:16[C] -> [18]
[ 0.531788] 0000:00:16[D] -> [17]
[ 0.531790] 0000:00:1c[A] -> [16]
[ 0.531792] 0000:00:1c[B] -> [17]
[ 0.531795] 0000:00:1c[C] -> [18]
[ 0.531797] 0000:00:1c[D] -> [19]
[ 0.531799] 0000:00:01[A] -> [16]
[ 0.531802] 0000:00:01[B] -> [17]
[ 0.531804] 0000:00:01[C] -> [18]
[ 0.531806] 0000:00:01[D] -> [19]
[ 0.531809] 0000:00:02[A] -> [16]
[ 0.531811] 0000:00:04[A] -> [16]
[ 0.531813] 0000:00:04[B] -> [17]
[ 0.531816] 0000:00:04[C] -> [18]
[ 0.531818] 0000:00:04[D] -> [19]
[ 0.531840] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.0 is a PCI bridge
[ 0.531846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.531874] 0000:02:00[A] -> [16]
[ 0.531877] 0000:02:00[B] -> [17]
[ 0.531879] 0000:02:00[C] -> [18]
[ 0.531882] 0000:02:00[D] -> [19]
[ 0.531890] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.1 is a PCI bridge
[ 0.531896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.531923] 0000:03:00[A] -> [17]
[ 0.531925] 0000:03:00[B] -> [18]
[ 0.531928] 0000:03:00[C] -> [19]
[ 0.531930] 0000:03:00[D] -> [16]
[ 0.531940] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.3 is a PCI bridge
[ 0.531945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.531972] 0000:04:00[A] -> [19]
[ 0.531974] 0000:04:00[B] -> [16]
[ 0.531977] 0000:04:00[C] -> [17]
[ 0.531979] 0000:04:00[D] -> [18]
[ 0.531988] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.4 is a PCI bridge
[ 0.531994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.532020] 0000:05:00[A] -> [16]
[ 0.532023] 0000:05:00[B] -> [17]
[ 0.532025] 0000:05:00[C] -> [18]
[ 0.532028] 0000:05:00[D] -> [19]
[ 0.532053] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.5 is a PCI bridge
[ 0.532058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.532085] 0000:06:00[A] -> [17]
[ 0.532087] 0000:06:00[B] -> [18]
[ 0.532090] 0000:06:00[C] -> [19]
[ 0.532092] 0000:06:00[D] -> [16]
[ 0.532109] pci_bind-0085 [00] pci_bind : Device
0000:00:01.0 is a PCI bridge
[ 0.532114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.532141] 0000:01:00[A] -> [16]
[ 0.532143] 0000:01:00[B] -> [17]
[ 0.532146] 0000:01:00[C] -> [18]
[ 0.532148] 0000:01:00[D] -> [19]
[ 0.532198] \_SB_.PCI0:_OSC invalid UUID
[ 0.532198] _OSC request data:1 1f 1f
[ 0.532201] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.532239] \_SB_.PCI0:_OSC invalid UUID
[ 0.532240] _OSC request data:1 0 1d
[ 0.532242] pci0000:00: ACPI _OSC request failed (AE_ERROR),
returned control mask: 0x1d
[ 0.532246] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.535536] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535572] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11
[ 0.535577] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12
14 15)
[ 0.535607] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535638] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9
[ 0.535642] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12
14 15) *9
[ 0.535671] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535699] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9
[ 0.535703] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12
14 15) *9
[ 0.535731] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535759] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10
[ 0.535763] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12
14 15)
[ 0.535790] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535818] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0
[ 0.535822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.535850] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535878] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0
[ 0.535882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.535911] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535939] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10
[ 0.535942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12
14 15)
[ 0.535970] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535998] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11
[ 0.536002] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12
14 15)
[ 0.536069] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.536078] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.536083] vgaarb: loaded
[ 0.536085] vgaarb: bridge control possible 0000:01:00.0
[ 0.536087] vgaarb: no bridge control possible 0000:00:02.0
[ 0.536179] SCSI subsystem initialized
[ 0.536213] libata version 3.00 loaded.
[ 0.536245] usbcore: registered new interface driver usbfs
[ 0.536257] usbcore: registered new interface driver hub
[ 0.536277] usbcore: registered new device driver usb
[ 0.536324] PCI: Using ACPI for IRQ routing
[ 0.537738] PCI: pci_cache_line_size set to 64 bytes
[ 0.537863] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.537865] reserve RAM buffer: 00000000b5a28000 - 00000000b7ffffff
[ 0.537867] reserve RAM buffer: 00000000b886a000 - 00000000bbffffff
[ 0.537871] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff
[ 0.537874] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.537876] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
[ 0.537947] NetLabel: Initializing
[ 0.537950] NetLabel: domain hash size = 128
[ 0.537952] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.537961] NetLabel: unlabeled traffic allowed by default
[ 0.537971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.537977] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.539993] Switching to clocksource hpet
[ 0.541903] AppArmor: AppArmor Filesystem Enabled
[ 0.541922] pnp: PnP ACPI init
[ 0.541934] ACPI: bus type pnp registered
[ 0.542307] pnp 00:00: [bus 00-3e]
[ 0.542310] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.542311] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.542313] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.542314] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.542316] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.542317] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.542318] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.542320] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.542321] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.542322] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.542324] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.542325] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.542326] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.542328] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.542329] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.542331] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.542332] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.542333] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.542335] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.542374] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.542387] pnp 00:01: [io 0x0000-0x001f]
[ 0.542389] pnp 00:01: [io 0x0081-0x0091]
[ 0.542390] pnp 00:01: [io 0x0093-0x009f]
[ 0.542391] pnp 00:01: [io 0x00c0-0x00df]
[ 0.542392] pnp 00:01: [dma 4]
[ 0.542409] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.542484] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.542501] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.542511] pnp 00:03: [io 0x00f0]
[ 0.542515] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13
Mode:0 Active:0 Dest:1)
[ 0.542519] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542525] pnp 00:03: [irq 13]
[ 0.542541] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.542550] pnp 00:04: [io 0x002e-0x002f]
[ 0.542551] pnp 00:04: [io 0x004e-0x004f]
[ 0.542553] pnp 00:04: [io 0x0061]
[ 0.542555] pnp 00:04: [io 0x0063]
[ 0.542556] pnp 00:04: [io 0x0065]
[ 0.542557] pnp 00:04: [io 0x0067]
[ 0.542558] pnp 00:04: [io 0x0068]
[ 0.542559] pnp 00:04: [io 0x006c]
[ 0.542560] pnp 00:04: [io 0x0070]
[ 0.542561] pnp 00:04: [io 0x0080]
[ 0.542562] pnp 00:04: [io 0x0092]
[ 0.542563] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.542564] pnp 00:04: [io 0x0680-0x069f]
[ 0.542566] pnp 00:04: [io 0x1000-0x1003]
[ 0.542567] pnp 00:04: [io 0x1004-0x1013]
[ 0.542568] pnp 00:04: [io 0xffff]
[ 0.542569] pnp 00:04: [io 0x0400-0x0453]
[ 0.542570] pnp 00:04: [io 0x0458-0x047f]
[ 0.542571] pnp 00:04: [io 0x0500-0x057f]
[ 0.542573] pnp 00:04: [io 0x164e-0x164f]
[ 0.542606] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.542610] system 00:04: [io 0x1000-0x1003] has been reserved
[ 0.542613] system 00:04: [io 0x1004-0x1013] has been reserved
[ 0.542616] system 00:04: [io 0xffff] has been reserved
[ 0.542619] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.542622] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.542625] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.542628] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.542631] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.542639] pnp 00:05: [io 0x0070-0x0077]
[ 0.542641] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.542644] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542649] pnp 00:05: [irq 8]
[ 0.542666] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.542692] pnp 00:06: [io 0x0454-0x0457]
[ 0.542721] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.542724] system 00:06: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.542760] pnp 00:07: [io 0x0060]
[ 0.542761] pnp 00:07: [io 0x0064]
[ 0.542763] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.542766] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542770] pnp 00:07: [irq 1]
[ 0.542788] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.542817] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12
Mode:0 Active:0 Dest:1)
[ 0.542820] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542824] pnp 00:08: [irq 12]
[ 0.542842] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13
(active)
[ 0.542954] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.542955] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[ 0.542957] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.542958] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.542959] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 0.542960] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.542962] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.542964] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.542965] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.542966] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.542968] pnp 00:09: [mem 0xfffff000-0xffffffff]
[ 0.542980] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because
it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.543006] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.543010] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.543013] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.543017] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.543020] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.543023] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.543027] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.543030] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.543033] system 00:09: [mem 0xff000000-0xffffffff] could not be
reserved
[ 0.543037] system 00:09: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.543047] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.543171] IOAPIC[0]: Set routing entry (2-20 -> 0x49 -> IRQ 20
Mode:0 Active:0 Dest:1)
[ 0.543174] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:49 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.543177] pnp 00:0a: [irq 20]
[ 0.543206] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
[ 0.543336] pnp: PnP ACPI: found 11 devices
[ 0.543338] ACPI: ACPI bus type pnp unregistered
[ 0.549778] pci 0000:01:00.0: no compatible bridge window for [mem
0xfff80000-0xffffffff pref]
[ 0.549785] PCI: max bus depth: 1 pci_try_num: 2
[ 0.549827] pci 0000:01:00.0: BAR 6: assigned [mem
0xf1000000-0xf107ffff pref]
[ 0.549831] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.549834] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.549838] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.549842] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 0.549847] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.549859] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.549865] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff]
[ 0.549874] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.549880] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff]
[ 0.549890] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.549896] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.549905] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.549909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.549915] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.549928] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:01.0[A] _PRT entry
[ 0.549937] IOAPIC[0]: Set routing entry (2-16 -> 0x51 -> IRQ 16
Mode:1 Active:1 Dest:1)
[ 0.549941] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:51 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.549944] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.549948] pci 0000:00:01.0: setting latency timer to 64
[ 0.549954] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.0[A] _PRT entry
[ 0.549959] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.549965] pci 0000:00:1c.0: setting latency timer to 64
[ 0.549971] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.1[B] _PRT entry
[ 0.549977] IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17
Mode:1 Active:1 Dest:1)
[ 0.549980] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:59 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.549983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.549988] pci 0000:00:1c.1: setting latency timer to 64
[ 0.549994] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.3[D] _PRT entry
[ 0.550001] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19
Mode:1 Active:1 Dest:1)
[ 0.550004] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:61 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.550006] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.550011] pci 0000:00:1c.3: setting latency timer to 64
[ 0.550017] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.4[A] _PRT entry
[ 0.550022] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.550027] pci 0000:00:1c.4: setting latency timer to 64
[ 0.550039] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.5[B] _PRT entry
[ 0.550044] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.550050] pci 0000:00:1c.5: setting latency timer to 64
[ 0.550053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.550054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.550056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.550057] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.550059] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.550060] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.550061] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.550063] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff
64bit pref]
[ 0.550064] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
[ 0.550066] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff]
[ 0.550067] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff]
[ 0.550069] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.550070] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff]
[ 0.550125] NET: Registered protocol family 2
[ 0.550318] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.551888] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.553016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.553157] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.553161] TCP reno registered
[ 0.553175] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.553205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.553308] NET: Registered protocol family 1
[ 0.553322] pci 0000:00:02.0: Boot video device
[ 0.553459] PCI: CLS 64 bytes, default 64
[ 0.553496] Unpacking initramfs...
[ 0.723042] Freeing initrd memory: 12380k freed
[ 0.724650] DMAR: No ATSR found
[ 0.724686] IOMMU 0 0xfed90000: using Queued invalidation
[ 0.724688] IOMMU 1 0xfed91000: using Queued invalidation
[ 0.724692] IOMMU: Setting RMRR:
[ 0.724704] IOMMU: Setting identity map for device 0000:00:02.0
[0xbb800000 - 0xbf9fffff]
[ 0.725062] IOMMU: Setting identity map for device 0000:00:1d.0
[0xbae1d000 - 0xbae33fff]
[ 0.725085] IOMMU: Setting identity map for device 0000:00:1a.0
[0xbae1d000 - 0xbae33fff]
[ 0.725099] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 0.725108] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0
- 0xffffff]
[ 0.725335] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 0.727095] audit: initializing netlink socket (disabled)
[ 0.727106] type=2000 audit(1324949000.518:1): initialized
[ 0.749859] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.765057] VFS: Disk quotas dquot_6.5.2
[ 0.765086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.765302] msgmni has been set to 15909
[ 0.765461] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.765486] io scheduler noop registered (default)
[ 0.765491] io scheduler deadline registered
[ 0.765508] io scheduler cfq registered
[ 0.765594] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.765617] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.765914] vesafb: mode is 1280x1024x32, linelength=5120, pages=11
[ 0.765917] vesafb: scrolling: redraw
[ 0.765920] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.767586] vesafb: framebuffer at 0xe0000000, mapped to
0xffffc90005800000, using 10240k, total 65472k
[ 0.767738] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 0.767739] bootsplash: silentjpeg size 109002 bytes
[ 0.777989] bootsplash: ...found (1280x1024, 40442 bytes, v3).
[ 0.778101] bootsplash: silentjpeg size 126037 bytes
[ 0.882677] Console: switching to colour frame buffer device 156x60
[ 0.962069] fb0: VESA VGA frame buffer device
[ 0.962474] intel_idle: MWAIT substates: 0x21120
[ 0.962475] intel_idle: v0.4 model 0x2A
[ 0.962476] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.962518] ERST: Table is not found!
[ 0.962842] GHES: HEST is not enabled!
[ 0.963242] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.084566] Non-volatile memory driver v1.3
[ 1.084937] Linux agpgart interface v0.103
[ 1.085368] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.086005] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
total, 262144K mappable
[ 1.087854] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.088547] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.089240] ahci 0000:00:1f.2: version 3.0
[ 1.089249] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1f.2[B] _PRT entry
[ 1.089987] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.090633] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.090657] ahci: SSS flag set, parallel bus scan disabled
[ 1.101254] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x13 impl SATA mode
[ 1.102014] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
pio slum part ems sxs apst
[ 1.102794] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.106635] scsi0 : ahci
[ 1.106935] scsi1 : ahci
[ 1.107220] scsi2 : ahci
[ 1.107497] scsi3 : ahci
[ 1.107773] scsi4 : ahci
[ 1.108048] scsi5 : ahci
[ 1.108376] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08100 irq 43
[ 1.109028] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08180 irq 43
[ 1.109687] ata3: DUMMY
[ 1.109906] ata4: DUMMY
[ 1.110126] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08300 irq 43
[ 1.110785] ata6: DUMMY
[ 1.111067] Fixed MDIO Bus: probed
[ 1.111378] arcnet loaded.
[ 1.111620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.112214] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1a.0[A] _PRT entry
[ 1.112956] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.113604] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.113607] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.114089] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.114781] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.141311] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.141329] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000
[ 1.173136] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.195461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.217783] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.240042] usb usb1: Product: EHCI Host Controller
[ 1.262192] usb usb1: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd
[ 1.284442] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.306584] hub 1-0:1.0: USB hub found
[ 1.328442] hub 1-0:1.0: 2 ports detected
[ 1.350123] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1d.0[A] _PRT entry
[ 1.372171] IOAPIC[0]: Set routing entry (2-23 -> 0x79 -> IRQ 23
Mode:1 Active:1 Dest:1)
[ 1.372176] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:79 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 1.372180] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.394153] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.394156] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.414770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.437965] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.460503] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[ 1.460548] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.464440] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.464459] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000
[ 1.473673] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.473717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.473718] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.473720] usb usb2: Product: EHCI Host Controller
[ 1.473721] usb usb2: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd
[ 1.473722] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.473841] hub 2-0:1.0: USB hub found
[ 1.473845] hub 2-0:1.0: 2 ports detected
[ 1.473918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.473931] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.753069] Initializing USB Mass Storage driver...
[ 1.753071] Refined TSC clocksource calibration: 2793.653 MHz.
[ 1.755293] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 256GB,
AXM08D1Q, max UDMA/133
[ 1.755295] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.755611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[ 1.757928] ata1.00: configured for UDMA/133
[ 1.854112] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.912671] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81
AXM0 PQ: 0 ANSI: 5
[ 1.912674] usbcore: registered new interface driver usb-storage
[ 1.912675] USB Mass Storage support registered.
[ 1.912682] usbcore: registered new interface driver ums-alauda
[ 1.912688] usbcore: registered new interface driver ums-cypress
[ 1.912694] usbcore: registered new interface driver ums-datafab
[ 1.912701] usbcore: registered new interface driver ums-freecom
[ 1.912707] usbcore: registered new interface driver ums-isd200
[ 1.912713] usbcore: registered new interface driver ums-jumpshot
[ 1.912718] usbcore: registered new interface driver ums-karma
[ 1.912724] usbcore: registered new interface driver ums-onetouch
[ 1.912730] usbcore: registered new interface driver ums-sddr09
[ 1.912736] usbcore: registered new interface driver ums-sddr55
[ 1.912741] usbcore: registered new interface driver ums-usbat
[ 1.912768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 1.912807] i8042: [0] 20 -> i8042 (command)
[ 1.913286] i8042: [0] 67 <- i8042 (return)
[ 1.913347] i8042: [1] 20 -> i8042 (command)
[ 1.913721] i8042: [1] 67 <- i8042 (return)
[ 1.913726] i8042: [1] 60 -> i8042 (command)
[ 1.913889] i8042: [1] 76 -> i8042 (parameter)
[ 1.914109] i8042: [1] d3 -> i8042 (command)
[ 1.914325] i8042: [1] 5a -> i8042 (parameter)
[ 1.914544] i8042: [1] 5a <- i8042 (return)
[ 1.914553] i8042: [2] a7 -> i8042 (command)
[ 1.914661] i8042: [2] 20 -> i8042 (command)
[ 1.914931] i8042: [2] 76 <- i8042 (return)
[ 1.914935] i8042: [2] a8 -> i8042 (command)
[ 1.915095] i8042: [2] 20 -> i8042 (command)
[ 1.915364] i8042: [2] 56 <- i8042 (return)
[ 1.915373] i8042: [3] 60 -> i8042 (command)
[ 1.915536] i8042: [3] 74 -> i8042 (parameter)
[ 1.915763] i8042: [3] d3 -> i8042 (command)
[ 1.915978] i8042: [3] f0 -> i8042 (parameter)
[ 1.916198] i8042: [3] f0 <- i8042 (return)
[ 1.916222] i8042: [4] d3 -> i8042 (command)
[ 1.916282] i8042: [4] 56 -> i8042 (parameter)
[ 1.916555] i8042: [4] 56 <- i8042 (return)
[ 1.916567] i8042: [4] d3 -> i8042 (command)
[ 1.916783] i8042: [4] a4 -> i8042 (parameter)
[ 1.917002] i8042: [4] a4 <- i8042 (return)
[ 1.917027] i8042: [5] 60 -> i8042 (command)
[ 1.917137] i8042: [5] 56 -> i8042 (parameter)
[ 1.917309] i8042: [5] 60 -> i8042 (command)
[ 1.917525] i8042: [5] 47 -> i8042 (parameter)
[ 1.917528] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.917552] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.917632] mousedev: PS/2 mouse device common for all mice
[ 1.917760] i8042: [5] f2 -> i8042 (kbd-data)
[ 1.917804] rtc_cmos 00:05: RTC can wake from S4
[ 1.917906] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.917932] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.918037] cpuidle: using governor ladder
[ 2.402856] i8042: [491] ed -> i8042 (kbd-data)
[ 2.402866] i8042: [491] fa <- i8042 (interrupt, 0, 12)
[ 2.402926] hpet1: lost 30 rtc interrupts
[ 2.403065] cpuidle: using governor menu
[ 2.403067] EFI Variables Facility v0.08 2004-May-17
[ 2.403295] usbcore: registered new interface driver usbhid
[ 2.403297] usbhid: USB HID core driver
[ 2.404035] i8042: [492] 00 -> i8042 (kbd-data)
[ 2.510920] i8042: [599] fa <- i8042 (interrupt, 0, 1)
[ 2.510940] i8042: [599] ed -> i8042 (kbd-data)
[ 2.511103] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 2.511126] TCP cubic registered
[ 2.511128] IPv6: Loaded, but administratively disabled, reboot
required to enable
[ 2.511144] lib80211: common routines for IEEE802.11 drivers
[ 2.511145] lib80211_crypt: registered algorithm 'NULL'
[ 2.511147] Registering the dns_resolver key type
[ 2.511162] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 2.511169]
[ 2.511169] printing PIC contents
[ 2.511173] ... PIC IMR: ffff
[ 2.511177] ... PIC IRR: 0c01
[ 2.511184] ... PIC ISR: 0000
[ 2.511187] ... PIC ELCR: 0e00
[ 2.643783] printing local APIC contents on CPU#0/0:
[ 2.643784] ... APIC ID: 00000000 (0)
[ 2.666176] ... APIC VERSION: 01060015
[ 2.688175] ... APIC TASKPRI: 00000000 (00)
[ 2.688176] ... APIC PROCPRI: 00000000
[ 2.688177] ... APIC LDR: 00000001
[ 2.688178] ... APIC SPIV: 000001ff
[ 2.688179] ... APIC ISR field:
[ 2.688180]
0000000000000000000000000000000000000000000000000000000000000000
[ 2.709866] i8042: [799] f4 -> i8042 (kbd-data)
[ 2.710552] ... APIC TMR field:
[ 2.710553]
0000000000000000000000000000000000000000000000000000000000000000
[ 2.732661] ... APIC IRR field:
[ 2.732662]
0000000002020000000200000000000000000000000000000000000000008000
[ 2.754421] ... APIC ESR: 00000000
[ 2.754422] ... APIC ICR: 000008fd
[ 2.754422] ... APIC ICR2: 00000040
[ 2.754423] ... APIC LVTT: 000000ef
[ 2.754424] ... APIC LVTPC: 00000400
[ 2.754425] ... APIC LVT0: 00010700
[ 2.754426] ... APIC LVT1: 00000400
[ 2.754427] ... APIC LVTERR: 000000fe
[ 2.754428] ... APIC TMICT: 000004c0
[ 2.754428] ... APIC TMCCT: 00000000
[ 2.754429] ... APIC TDCR: 00000003
[ 2.754430]
[ 2.775580] number of MP IRQ sources: 15.
[ 2.775582] number of IO-APIC #2 registers: 24.
[ 2.775583] testing the IO APIC.......................
[ 2.775623] i8042: [864] fa <- i8042 (interrupt, 0, 1)
[ 2.775695] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 2.775800] sd 0:0:0:0: [sda] Write Protect is off
[ 2.775802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.775812] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.786128] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.786130] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.815686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.820070] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133
[ 2.825187] ata2.00: configured for UDMA/133
[ 2.830643] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N
A101 PQ: 0 ANSI: 5
[ 2.995778]
[ 2.995813] i8042: [1085] d4 -> i8042 (command)
[ 2.995924] i8042: [1085] f2 -> i8042 (parameter)
[ 2.995926] hub 1-1:1.0: USB hub found
[ 2.996023] hub 1-1:1.0: 6 ports detected
[ 2.997464] sda: sda1 sda2
[ 2.999069] i8042: [1087] fa <- i8042 (interrupt, 1, 12)
[ 2.999923] i8042: [1088] 00 <- i8042 (interrupt, 1, 12)
[ 2.999939] i8042: [1089] 60 -> i8042 (command)
[ 3.000102] i8042: [1089] 45 -> i8042 (parameter)
[ 3.000317] i8042: [1089] 60 -> i8042 (command)
[ 3.000531] i8042: [1089] 47 -> i8042 (parameter)
[ 3.000767] i8042: [1089] d4 -> i8042 (command)
[ 3.000930] i8042: [1089] f2 -> i8042 (parameter)
[ 3.004925] i8042: [1089] fa <- i8042 (interrupt, 1, 12)
[ 3.005855] i8042: [1094] 00 <- i8042 (interrupt, 1, 12)
[ 3.005871] i8042: [1095] d4 -> i8042 (command)
[ 3.006034] i8042: [1095] f6 -> i8042 (parameter)
[ 3.009373] i8042: [1095] fa <- i8042 (interrupt, 1, 12)
[ 3.009391] i8042: [1099] d4 -> i8042 (command)
[ 3.009609] i8042: [1099] f3 -> i8042 (parameter)
[ 3.012027] i8042: [1099] fa <- i8042 (interrupt, 1, 12)
[ 3.012042] i8042: [1101] d4 -> i8042 (command)
[ 3.012206] i8042: [1101] 0a -> i8042 (parameter)
[ 3.015493] i8042: [1101] fa <- i8042 (interrupt, 1, 12)
[ 3.015508] i8042: [1105] d4 -> i8042 (command)
[ 3.015725] i8042: [1105] e8 -> i8042 (parameter)
[ 3.018010] i8042: [1105] fa <- i8042 (interrupt, 1, 12)
[ 3.018029] i8042: [1107] d4 -> i8042 (command)
[ 3.018192] i8042: [1107] 00 -> i8042 (parameter)
[ 3.020628] i8042: [1107] fa <- i8042 (interrupt, 1, 12)
[ 3.020643] i8042: [1110] d4 -> i8042 (command)
[ 3.020807] i8042: [1110] f3 -> i8042 (parameter)
[ 3.023287] i8042: [1110] fa <- i8042 (interrupt, 1, 12)
[ 3.023302] i8042: [1112] d4 -> i8042 (command)
[ 3.023465] i8042: [1112] 14 -> i8042 (parameter)
[ 3.026067] i8042: [1113] fa <- i8042 (interrupt, 1, 12)
[ 3.026083] i8042: [1115] d4 -> i8042 (command)
[ 3.026247] i8042: [1115] f3 -> i8042 (parameter)
[ 3.029425] i8042: [1115] fa <- i8042 (interrupt, 1, 12)
[ 3.029440] i8042: [1119] d4 -> i8042 (command)
[ 3.029708] i8042: [1119] 3c -> i8042 (parameter)
[ 3.031965] i8042: [1119] fa <- i8042 (interrupt, 1, 12)
[ 3.031981] i8042: [1121] d4 -> i8042 (command)
[ 3.032144] i8042: [1121] f3 -> i8042 (parameter)
[ 3.034971] i8042: [1121] fa <- i8042 (interrupt, 1, 12)
[ 3.034987] i8042: [1124] d4 -> i8042 (command)
[ 3.035149] i8042: [1124] 28 -> i8042 (parameter)
[ 3.037422] i8042: [1124] fa <- i8042 (interrupt, 1, 12)
[ 3.037436] i8042: [1127] d4 -> i8042 (command)
[ 3.037600] i8042: [1127] f3 -> i8042 (parameter)
[ 3.040473] i8042: [1127] fa <- i8042 (interrupt, 1, 12)
[ 3.040490] i8042: [1130] d4 -> i8042 (command)
[ 3.040757] i8042: [1130] 14 -> i8042 (parameter)
[ 3.043019] i8042: [1130] fa <- i8042 (interrupt, 1, 12)
[ 3.043034] i8042: [1132] d4 -> i8042 (command)
[ 3.043198] i8042: [1132] f3 -> i8042 (parameter)
[ 3.046227] i8042: [1132] fa <- i8042 (interrupt, 1, 12)
[ 3.046243] i8042: [1135] d4 -> i8042 (command)
[ 3.046408] i8042: [1135] 14 -> i8042 (parameter)
[ 3.048701] i8042: [1135] fa <- i8042 (interrupt, 1, 12)
[ 3.048718] i8042: [1138] d4 -> i8042 (command)
[ 3.048882] i8042: [1138] f3 -> i8042 (parameter)
[ 3.051911] i8042: [1138] fa <- i8042 (interrupt, 1, 12)
[ 3.051926] i8042: [1141] d4 -> i8042 (command)
[ 3.052194] i8042: [1141] 3c -> i8042 (parameter)
[ 3.054453] i8042: [1141] fa <- i8042 (interrupt, 1, 12)
[ 3.054467] i8042: [1144] d4 -> i8042 (command)
[ 3.054630] i8042: [1144] f3 -> i8042 (parameter)
[ 3.060839] i8042: [1144] fa <- i8042 (interrupt, 1, 12)
[ 3.060853] i8042: [1150] d4 -> i8042 (command)
[ 3.061069] i8042: [1150] 28 -> i8042 (parameter)
[ 3.063300] i8042: [1150] fa <- i8042 (interrupt, 1, 12)
[ 3.063316] i8042: [1153] d4 -> i8042 (command)
[ 3.063479] i8042: [1153] f3 -> i8042 (parameter)
[ 3.066150] i8042: [1153] fa <- i8042 (interrupt, 1, 12)
[ 3.066166] i8042: [1155] d4 -> i8042 (command)
[ 3.066329] i8042: [1155] 14 -> i8042 (parameter)
[ 3.068591] i8042: [1156] fa <- i8042 (interrupt, 1, 12)
[ 3.068608] i8042: [1158] d4 -> i8042 (command)
[ 3.068772] i8042: [1158] f3 -> i8042 (parameter)
[ 3.071764] i8042: [1158] fa <- i8042 (interrupt, 1, 12)
[ 3.071780] i8042: [1161] d4 -> i8042 (command)
[ 3.071943] i8042: [1161] 14 -> i8042 (parameter)
[ 3.074268] i8042: [1161] fa <- i8042 (interrupt, 1, 12)
[ 3.074285] i8042: [1164] d4 -> i8042 (command)
[ 3.074448] i8042: [1164] f2 -> i8042 (parameter)
[ 3.077037] i8042: [1164] fa <- i8042 (interrupt, 1, 12)
[ 3.077906] i8042: [1166] 00 <- i8042 (interrupt, 1, 12)
[ 3.077922] i8042: [1167] d4 -> i8042 (command)
[ 3.078085] i8042: [1167] e8 -> i8042 (parameter)
[ 3.080814] i8042: [1167] fa <- i8042 (interrupt, 1, 12)
[ 3.080830] i8042: [1170] d4 -> i8042 (command)
[ 3.081046] i8042: [1170] 00 -> i8042 (parameter)
[ 3.083272] i8042: [1170] fa <- i8042 (interrupt, 1, 12)
[ 3.083288] i8042: [1173] d4 -> i8042 (command)
[ 3.083555] i8042: [1173] e8 -> i8042 (parameter)
[ 3.085294] IO APIC #2......
[ 3.085295] .... register #00: 02000000
[ 3.085296] ....... : physical APIC id: 02
[ 3.085297] ....... : Delivery Type: 0
[ 3.085298] ....... : LTS : 0
[ 3.085299] .... register #01: 00170020
[ 3.085300] ....... : max redirection entries: 17
[ 3.085301] ....... : PRQ implemented: 0
[ 3.085302] ....... : IO APIC version: 20
[ 3.085302] .... IRQ redirection table:
[ 3.085303] NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:
[ 3.085308] 00 0000 0 1 0 0 0 0 0 0 00
[ 3.085313] 01 0011 1 0 0 0 0 0 0 0 01
[ 3.085318] 02 0001 1 0 0 0 0 0 0 0 02
[ 3.085323] 03 0002 1 0 0 0 0 0 0 0 03
[ 3.085328] 04 0003 1 0 0 0 0 0 0 0 04
[ 3.085333] 05 0004 1 0 0 0 0 0 0 0 05
[ 3.085342] 06 0005 1 0 0 0 0 0 0 0 06
[ 3.085347] 07 0006 1 0 0 0 0 0 0 0 07
[ 3.085352] 08 0010 1 0 0 0 0 0 0 0 08
[ 3.085356] 09 0008 1 0 1 0 0 0 0 0 09
[ 3.085363] 0a 0009 1 0 0 0 0 0 0 0 0A
[ 3.085368] 0b 000A 1 0 0 0 0 0 0 0 0B
[ 3.085373] 0c 0012 1 0 0 0 0 0 0 0 0C
[ 3.085378] 0d 000F 1 0 0 0 0 0 0 0 0D
[ 3.085383] 0e 000D 1 0 0 0 0 0 0 0 0E
[ 3.085388] 0f 000E 1 0 0 0 0 0 0 0 0F
[ 3.085393] 10 0014 1 0 1 0 1 0 0 0 10
[ 3.085398] 11 0015 1 1 1 0 1 0 0 0 11
[ 3.085402] 12 0000 0 1 0 0 0 0 0 0 00
[ 3.085407] 13 0016 1 1 1 0 1 0 0 0 13
[ 3.085412] 14 0013 1 0 0 0 0 0 0 0 14
[ 3.085417] 15 0000 0 1 0 0 0 0 0 0 00
[ 3.085421] 16 0000 0 1 0 0 0 0 0 0 00
[ 3.085426] 17 0019 1 0 1 0 1 0 0 0 17
[ 3.085428] IRQ to pin mappings:
[ 3.085429] IRQ0 -> 0:2
[ 3.085431] IRQ1 -> 0:1
[ 3.085432] IRQ3 -> 0:3
[ 3.085433] IRQ4 -> 0:4
[ 3.085435] IRQ5 -> 0:5
[ 3.085436] IRQ6 -> 0:6
[ 3.085437] IRQ7 -> 0:7
[ 3.085438] IRQ8 -> 0:8
[ 3.085440] IRQ9 -> 0:9
[ 3.085441] IRQ10 -> 0:10
[ 3.085443] IRQ11 -> 0:11
[ 3.085444] IRQ12 -> 0:12
[ 3.085445] IRQ13 -> 0:13
[ 3.085446] IRQ14 -> 0:14
[ 3.085448] IRQ15 -> 0:15
[ 3.085449] IRQ16 -> 0:16
[ 3.085450] IRQ17 -> 0:17
[ 3.085451] IRQ19 -> 0:19
[ 3.085453] IRQ20 -> 0:20
[ 3.085454] IRQ23 -> 0:23
[ 3.085455] .................................... done.
[ 3.085478] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.086479] i8042: [1175] fa <- i8042 (interrupt, 1, 12)
[ 3.086492] i8042: [1176] d4 -> i8042 (command)
[ 3.086656] i8042: [1176] 00 -> i8042 (parameter)
[ 3.089087] i8042: [1176] fa <- i8042 (interrupt, 1, 12)
[ 3.089102] i8042: [1178] d4 -> i8042 (command)
[ 3.089370] i8042: [1178] e8 -> i8042 (parameter)
[ 3.091996] i8042: [1178] fa <- i8042 (interrupt, 1, 12)
[ 3.092012] i8042: [1181] d4 -> i8042 (command)
[ 3.092227] i8042: [1181] 00 -> i8042 (parameter)
[ 3.094467] i8042: [1181] fa <- i8042 (interrupt, 1, 12)
[ 3.094483] i8042: [1184] d4 -> i8042 (command)
[ 3.094648] i8042: [1184] e8 -> i8042 (parameter)
[ 3.097145] i8042: [1184] fa <- i8042 (interrupt, 1, 12)
[ 3.097161] i8042: [1186] d4 -> i8042 (command)
[ 3.097427] i8042: [1186] 00 -> i8042 (parameter)
[ 3.099660] i8042: [1187] fa <- i8042 (interrupt, 1, 12)
[ 3.099675] i8042: [1189] d4 -> i8042 (command)
[ 3.099838] i8042: [1189] e9 -> i8042 (parameter)
[ 3.100250] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.102322] i8042: [1189] fa <- i8042 (interrupt, 1, 12)
[ 3.103328] i8042: [1192] 33 <- i8042 (interrupt, 1, 12)
[ 3.104331] i8042: [1193] cc <- i8042 (interrupt, 1, 12)
[ 3.105784] i8042: [1193] a3 <- i8042 (interrupt, 1, 12)
[ 3.105799] i8042: [1195] d4 -> i8042 (command)
[ 3.106067] i8042: [1195] f6 -> i8042 (parameter)
[ 3.108584] i8042: [1195] fa <- i8042 (interrupt, 1, 12)
[ 3.108600] i8042: [1198] d4 -> i8042 (command)
[ 3.108762] i8042: [1198] e8 -> i8042 (parameter)
[ 3.111662] i8042: [1198] fa <- i8042 (interrupt, 1, 12)
[ 3.111677] i8042: [1201] d4 -> i8042 (command)
[ 3.111945] i8042: [1201] 00 -> i8042 (parameter)
[ 3.114237] i8042: [1201] fa <- i8042 (interrupt, 1, 12)
[ 3.114254] i8042: [1204] d4 -> i8042 (command)
[ 3.114522] i8042: [1204] e6 -> i8042 (parameter)
[ 3.117199] i8042: [1204] fa <- i8042 (interrupt, 1, 12)
[ 3.117214] i8042: [1207] d4 -> i8042 (command)
[ 3.117378] i8042: [1207] e6 -> i8042 (parameter)
[ 3.119700] i8042: [1207] fa <- i8042 (interrupt, 1, 12)
[ 3.119715] i8042: [1209] d4 -> i8042 (command)
[ 3.119880] i8042: [1209] e6 -> i8042 (parameter)
[ 3.123090] i8042: [1209] fa <- i8042 (interrupt, 1, 12)
[ 3.123105] i8042: [1212] d4 -> i8042 (command)
[ 3.123320] i8042: [1212] e9 -> i8042 (parameter)
[ 3.125623] i8042: [1212] fa <- i8042 (interrupt, 1, 12)
[ 3.126956] i8042: [1215] 05 <- i8042 (interrupt, 1, 12)
[ 3.127832] i8042: [1216] 00 <- i8042 (interrupt, 1, 12)
[ 3.128715] i8042: [1216] 64 <- i8042 (interrupt, 1, 12)
[ 3.128731] i8042: [1218] d4 -> i8042 (command)
[ 3.128894] i8042: [1218] f6 -> i8042 (parameter)
[ 3.132087] i8042: [1218] fa <- i8042 (interrupt, 1, 12)
[ 3.132101] i8042: [1221] d4 -> i8042 (command)
[ 3.132265] i8042: [1221] f5 -> i8042 (parameter)
[ 3.134770] i8042: [1222] fa <- i8042 (interrupt, 1, 12)
[ 3.134786] i8042: [1224] d4 -> i8042 (command)
[ 3.134949] i8042: [1224] e6 -> i8042 (parameter)
[ 3.137759] i8042: [1224] fa <- i8042 (interrupt, 1, 12)
[ 3.137773] i8042: [1227] d4 -> i8042 (command)
[ 3.137935] i8042: [1227] e6 -> i8042 (parameter)
[ 3.140370] i8042: [1227] fa <- i8042 (interrupt, 1, 12)
[ 3.140385] i8042: [1230] d4 -> i8042 (command)
[ 3.140654] i8042: [1230] e6 -> i8042 (parameter)
[ 3.143061] i8042: [1230] fa <- i8042 (interrupt, 1, 12)
[ 3.143076] i8042: [1232] d4 -> i8042 (command)
[ 3.143291] i8042: [1232] e9 -> i8042 (parameter)
[ 3.145630] i8042: [1232] fa <- i8042 (interrupt, 1, 12)
[ 3.147022] i8042: [1235] 05 <- i8042 (interrupt, 1, 12)
[ 3.147898] i8042: [1236] 02 <- i8042 (interrupt, 1, 12)
[ 3.148782] i8042: [1236] 64 <- i8042 (interrupt, 1, 12)
[ 3.148796] i8042: [1238] d4 -> i8042 (command)
[ 3.148959] i8042: [1238] e8 -> i8042 (parameter)
[ 3.151988] PM: Checking hibernation image partition /dev/system/swap
[ 3.152061] i8042: [1241] fa <- i8042 (interrupt, 1, 12)
[ 3.152134] i8042: [1241] d4 -> i8042 (command)
[ 3.152298] i8042: [1242] 03 -> i8042 (parameter)
[ 3.154621] i8042: [1244] fa <- i8042 (interrupt, 1, 12)
[ 3.154707] i8042: [1244] d4 -> i8042 (command)
[ 3.154818] i8042: [1244] e6 -> i8042 (parameter)
[ 3.157874] i8042: [1247] fa <- i8042 (interrupt, 1, 12)
[ 3.157971] i8042: [1247] d4 -> i8042 (command)
[ 3.158134] i8042: [1247] e6 -> i8042 (parameter)
[ 3.160475] i8042: [1250] fa <- i8042 (interrupt, 1, 12)
[ 3.160558] i8042: [1250] d4 -> i8042 (command)
[ 3.160669] i8042: [1250] e6 -> i8042 (parameter)
[ 3.163664] i8042: [1253] fa <- i8042 (interrupt, 1, 12)
[ 3.163788] i8042: [1253] d4 -> i8042 (command)
[ 3.163900] i8042: [1253] e9 -> i8042 (parameter)
[ 3.167138] i8042: [1256] fa <- i8042 (interrupt, 1, 12)
[ 3.168005] i8042: [1257] 05 <- i8042 (interrupt, 1, 12)
[ 3.168892] i8042: [1258] 03 <- i8042 (interrupt, 1, 12)
[ 3.169776] i8042: [1259] 64 <- i8042 (interrupt, 1, 12)
[ 3.169856] i8042: [1259] d4 -> i8042 (command)
[ 3.169966] i8042: [1259] e8 -> i8042 (parameter)
[ 3.173330] i8042: [1263] fa <- i8042 (interrupt, 1, 12)
[ 3.173421] i8042: [1263] d4 -> i8042 (command)
[ 3.173639] i8042: [1263] 00 -> i8042 (parameter)
[ 3.175962] i8042: [1265] fa <- i8042 (interrupt, 1, 12)
[ 3.176044] i8042: [1265] d4 -> i8042 (command)
[ 3.176209] i8042: [1265] e6 -> i8042 (parameter)
[ 3.178726] i8042: [1268] fa <- i8042 (interrupt, 1, 12)
[ 3.178820] i8042: [1268] d4 -> i8042 (command)
[ 3.178931] i8042: [1268] e6 -> i8042 (parameter)
[ 3.181375] i8042: [1271] fa <- i8042 (interrupt, 1, 12)
[ 3.181499] i8042: [1271] d4 -> i8042 (command)
[ 3.182240] i8042: [1271] e6 -> i8042 (parameter)
[ 3.184747] i8042: [1274] fa <- i8042 (interrupt, 1, 12)
[ 3.184842] i8042: [1274] d4 -> i8042 (command)
[ 3.184954] i8042: [1274] e9 -> i8042 (parameter)
[ 3.187999] i8042: [1277] fa <- i8042 (interrupt, 1, 12)
[ 3.188866] i8042: [1278] 05 <- i8042 (interrupt, 1, 12)
[ 3.189767] i8042: [1279] 00 <- i8042 (interrupt, 1, 12)
[ 3.190756] i8042: [1280] 64 <- i8042 (interrupt, 1, 12)
[ 3.190841] i8042: [1280] d4 -> i8042 (command)
[ 3.190953] i8042: [1280] e1 -> i8042 (parameter)
[ 3.215928] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.237807] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.259900] hub 2-1:1.0: USB hub found
[ 3.281547] hub 2-1:1.0: 8 ports detected
[ 3.299961] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.389927] i8042: [1480] d4 -> i8042 (command)
[ 3.390091] i8042: [1480] 0a -> i8042 (parameter)
[ 3.398162] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[ 3.561936] usb 1-1.4: New USB device found, idVendor=0c45,
idProduct=642a
[ 3.583110] usb 1-1.4: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 3.589561] i8042: [1680] d4 -> i8042 (command)
[ 3.589671] i8042: [1680] f5 -> i8042 (parameter)
[ 3.604568] i8042: [1695] fa <- i8042 (interrupt, 1, 12)
[ 3.604573] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM
[ 3.604613] i8042: [1695] d4 -> i8042 (command)
[ 3.604725] i8042: [1695] f3 -> i8042 (parameter)
[ 3.626275] i8042: [1716] fa <- i8042 (interrupt, 1, 12)
[ 3.626278] usb 1-1.4: Manufacturer: CN0XRCWG724871ANS3CZA00
[ 3.626320] i8042: [1716] d4 -> i8042 (command)
[ 3.626484] i8042: [1716] 66 -> i8042 (parameter)
[ 3.648215] i8042: [1738] fe <- i8042 (interrupt, 1, 12)
[ 3.648259] i8042: [1738] d4 -> i8042 (command)
[ 3.648424] i8042: [1738] 88 -> i8042 (parameter)
[ 3.678465] i8042: [1769] d4 -> i8042 (command)
[ 3.678643] i8042: [1769] f3 -> i8042 (parameter)
[ 3.681134] i8042: [1771] fc <- i8042 (interrupt, 1, 12)
[ 3.681225] i8042: [1771] d4 -> i8042 (command)
[ 3.681336] i8042: [1771] f4 -> i8042 (parameter)
[ 3.684450] i8042: [1775] fa <- i8042 (interrupt, 1, 12)
[ 3.684574] i8042: [1775] d4 -> i8042 (command)
[ 3.684791] i8042: [1775] f6 -> i8042 (parameter)
[ 3.688413] i8042: [1779] fa <- i8042 (interrupt, 1, 12)
[ 3.688507] i8042: [1779] d4 -> i8042 (command)
[ 3.689512] i8042: [1779] ff -> i8042 (parameter)
[ 3.692089] i8042: [1782] fa <- i8042 (interrupt, 1, 12)
[ 3.726675] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[ 3.838521] usb 2-1.5: New USB device found, idVendor=8086,
idProduct=0189
[ 3.861231] usb 2-1.5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.892268] i8042: [1983] aa <- i8042 (interrupt, 1, 12)
[ 3.893135] i8042: [1984] 00 <- i8042 (interrupt, 1, 12)
[ 3.893215] i8042: [1984] d4 -> i8042 (command)
[ 3.893483] i8042: [1984] f3 -> i8042 (parameter)
[ 3.896588] i8042: [1987] fa <- i8042 (interrupt, 1, 12)
[ 3.896676] i8042: [1987] d4 -> i8042 (command)
[ 3.896787] i8042: [1987] c8 -> i8042 (parameter)
[ 3.899159] i8042: [1990] fa <- i8042 (interrupt, 1, 12)
[ 3.899238] i8042: [1990] d4 -> i8042 (command)
[ 3.899454] i8042: [1990] f3 -> i8042 (parameter)
[ 3.902540] i8042: [1993] fa <- i8042 (interrupt, 1, 12)
[ 3.902664] i8042: [1993] d4 -> i8042 (command)
[ 3.902775] i8042: [1993] 64 -> i8042 (parameter)
[ 3.905189] i8042: [1996] fa <- i8042 (interrupt, 1, 12)
[ 3.905283] i8042: [1996] d4 -> i8042 (command)
[ 3.905973] i8042: [1996] f3 -> i8042 (parameter)
[ 3.908560] i8042: [1999] fa <- i8042 (interrupt, 1, 12)
[ 3.908653] i8042: [1999] d4 -> i8042 (command)
[ 3.908765] i8042: [1999] 50 -> i8042 (parameter)
[ 3.911650] i8042: [2002] fa <- i8042 (interrupt, 1, 12)
[ 3.911743] i8042: [2002] d4 -> i8042 (command)
[ 3.911855] i8042: [2002] f2 -> i8042 (parameter)
[ 3.914438] i8042: [2005] fa <- i8042 (interrupt, 1, 12)
[ 3.915312] i8042: [2006] 03 <- i8042 (interrupt, 1, 12)
[ 3.915406] i8042: [2006] d4 -> i8042 (command)
[ 3.916096] i8042: [2006] f3 -> i8042 (parameter)
[ 3.918631] i8042: [2009] fa <- i8042 (interrupt, 1, 12)
[ 3.918752] i8042: [2009] d4 -> i8042 (command)
[ 3.918864] i8042: [2009] c8 -> i8042 (parameter)
[ 3.921832] i8042: [2012] fa <- i8042 (interrupt, 1, 12)
[ 3.921958] i8042: [2012] d4 -> i8042 (command)
[ 3.922122] i8042: [2012] f3 -> i8042 (parameter)
[ 3.924645] i8042: [2015] fa <- i8042 (interrupt, 1, 12)
[ 3.924738] i8042: [2015] d4 -> i8042 (command)
[ 3.924850] i8042: [2015] c8 -> i8042 (parameter)
[ 3.927376] i8042: [2018] fa <- i8042 (interrupt, 1, 12)
[ 3.927502] i8042: [2018] d4 -> i8042 (command)
[ 3.927667] i8042: [2018] f3 -> i8042 (parameter)
[ 3.930190] i8042: [2021] fa <- i8042 (interrupt, 1, 12)
[ 3.930313] i8042: [2021] d4 -> i8042 (command)
[ 3.931428] i8042: [2021] 50 -> i8042 (parameter)
[ 3.933733] i8042: [2024] fa <- i8042 (interrupt, 1, 12)
[ 3.933824] i8042: [2024] d4 -> i8042 (command)
[ 3.933936] i8042: [2024] f2 -> i8042 (parameter)
[ 3.936990] i8042: [2027] fa <- i8042 (interrupt, 1, 12)
[ 3.937836] i8042: [2028] 03 <- i8042 (interrupt, 1, 12)
[ 3.937931] i8042: [2028] d4 -> i8042 (command)
[ 3.938042] i8042: [2028] f3 -> i8042 (parameter)
[ 3.941461] i8042: [2032] fa <- i8042 (interrupt, 1, 12)
[ 3.941554] i8042: [2032] d4 -> i8042 (command)
[ 3.941770] i8042: [2032] c8 -> i8042 (parameter)
[ 3.944095] i8042: [2035] fa <- i8042 (interrupt, 1, 12)
[ 3.944219] i8042: [2035] d4 -> i8042 (command)
[ 3.944330] i8042: [2035] f3 -> i8042 (parameter)
[ 3.947216] i8042: [2038] fa <- i8042 (interrupt, 1, 12)
[ 3.947324] i8042: [2038] d4 -> i8042 (command)
[ 3.947488] i8042: [2038] 64 -> i8042 (parameter)
[ 3.949809] i8042: [2040] fa <- i8042 (interrupt, 1, 12)
[ 3.949903] i8042: [2040] d4 -> i8042 (command)
[ 3.950015] i8042: [2040] f3 -> i8042 (parameter)
[ 3.952817] i8042: [2043] fa <- i8042 (interrupt, 1, 12)
[ 3.952941] i8042: [2043] d4 -> i8042 (command)
[ 3.953053] i8042: [2043] 50 -> i8042 (parameter)
[ 3.955464] i8042: [2046] fa <- i8042 (interrupt, 1, 12)
[ 3.955589] i8042: [2046] d4 -> i8042 (command)
[ 3.955753] i8042: [2046] f2 -> i8042 (parameter)
[ 3.958834] i8042: [2049] fa <- i8042 (interrupt, 1, 12)
[ 3.959841] i8042: [2050] 03 <- i8042 (interrupt, 1, 12)
[ 3.959980] i8042: [2051] d4 -> i8042 (command)
[ 3.960092] i8042: [2051] f3 -> i8042 (parameter)
[ 3.963087] i8042: [2054] fa <- i8042 (interrupt, 1, 12)
[ 3.963213] i8042: [2054] d4 -> i8042 (command)
[ 3.963378] i8042: [2054] 64 -> i8042 (parameter)
[ 3.965850] i8042: [2056] fa <- i8042 (interrupt, 1, 12)
[ 3.965945] i8042: [2056] d4 -> i8042 (command)
[ 3.966056] i8042: [2056] e8 -> i8042 (parameter)
[ 3.968700] i8042: [2059] fa <- i8042 (interrupt, 1, 12)
[ 3.968794] i8042: [2059] d4 -> i8042 (command)
[ 3.968959] i8042: [2059] 03 -> i8042 (parameter)
[ 3.971304] i8042: [2062] fa <- i8042 (interrupt, 1, 12)
[ 3.971398] i8042: [2062] d4 -> i8042 (command)
[ 3.974350] i8042: [2062] e6 -> i8042 (parameter)
[ 3.976879] i8042: [2067] fa <- i8042 (interrupt, 1, 12)
[ 3.977018] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input1
[ 4.000810] i8042: [2091] d4 -> i8042 (command)
[ 4.000921] i8042: [2091] f4 -> i8042 (parameter)
[ 4.003458] i8042: [2094] fa <- i8042 (interrupt, 1, 12)
[ 4.003598] PM: Hibernation image not present or could not be loaded.
[ 4.003620] registered taskstats version 1
[ 4.035412] Magic number: 7:990:357
[ 4.059596] rtc_cmos 00:05: setting system clock to 2011-12-27
01:23:24 UTC (1324949004)
[ 4.085662] Freeing unused kernel memory: 944k freed
[ 4.110469] Write protecting the kernel read-only data: 12288k
[ 4.135741] Freeing unused kernel memory: 192k freed
[ 4.164739] Freeing unused kernel memory: 1944k freed
[ 4.241203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.266531] shpchp: shpcd_init: pci_register_driver = 0
[ 4.266533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.322294] udevd[131]: starting version 173
[ 4.356829] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.393554] ACPI: Power Button [PWRB]
[ 4.393740] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.393743] ACPI: Thermal Zone [TZ00] (54 C)
[ 4.393978] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.393981] ACPI: Thermal Zone [TZ01] (54 C)
[ 4.522579] pci_irq-0373 [00] pci_irq_lookup : Found
0000:04:00.0[A] _PRT entry
[ 4.522586] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 4.522610] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 4.522615] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 4.522627] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 3
[ 4.522834] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000
[ 4.522906] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 4.522913] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 4.522918] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 4.522924] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 4.522929] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 4.523002] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 4.523043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.523045] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.523047] usb usb3: Product: xHCI Host Controller
[ 4.523049] usb usb3: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd
[ 4.523050] usb usb3: SerialNumber: 0000:04:00.0
[ 4.523265] xHCI xhci_add_endpoint called for root hub
[ 4.523267] xHCI xhci_check_bandwidth called for root hub
[ 4.523328] hub 3-0:1.0: USB hub found
[ 4.523339] hub 3-0:1.0: 2 ports detected
[ 4.523379] ACPI: Sleep Button [SLPB]
[ 4.523426] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 4.523478] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 4.523488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 4
[ 4.524286] ACPI: Lid Switch [LID0]
[ 4.524340] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.524373] ACPI: Power Button [PWRF]
[ 4.526215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.526218] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.526220] usb usb4: Product: xHCI Host Controller
[ 4.526222] usb usb4: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd
[ 4.526223] usb usb4: SerialNumber: 0000:04:00.0
[ 4.526375] xHCI xhci_add_endpoint called for root hub
[ 4.526377] xHCI xhci_check_bandwidth called for root hub
[ 4.526439] hub 4-0:1.0: USB hub found
[ 4.526448] hub 4-0:1.0: 2 ports detected
[ 4.526942] [drm] Initialized drm 1.1.0 20060810
[ 4.531282] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:02.0[A] _PRT entry
[ 4.531289] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.531292] i915 0000:00:02.0: setting latency timer to 64
[ 5.368663] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 5.368666] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.368667] [drm] Driver supports precise vblank timestamp query.
[ 5.378777] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call
failed
[ 5.378819] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call
failed
[ 5.378837] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.378839] vgaarb: transferring owner from PCI:0000:00:02.0 to
PCI:0000:01:00.0
[ 5.569660] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 5.609793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.621761] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.633738] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.638365] usb 3-1: New USB device found, idVendor=04ca, idProduct=0027
[ 5.642881] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.647346] usb 3-1: Product: USB Multimedia Keyboard
[ 5.651787] usb 3-1: Manufacturer: Lite-On Technology Corp.
[ 5.656387] usb 3-1: ep 0x81 - rounding interval to 128 microframes,
ep desc says 192 microframes
[ 5.660984] usb 3-1: ep 0x82 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 5.680911] input: Lite-On Technology Corp. USB Multimedia Keyboard
as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input6
[ 5.685919] generic-usb 0003:04CA:0027.0001: input,hidraw0: USB HID
v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on
usb-0000:04:00.0-1/input0
[ 5.721562] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.728628] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.735543] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.740403] input: Lite-On Technology Corp. USB Multimedia Keyboard
as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input7
[ 5.745533] generic-usb 0003:04CA:0027.0002: input,hiddev0,hidraw1:
USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard]
on usb-0000:04:00.0-1/input1
[ 5.857203] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 5.876155] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.881610] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.886481] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608
[ 5.891212] usb 3-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 5.895947] usb 3-2: Product: USB2.0 Hub
[ 5.901665] hub 3-2:1.0: USB hub found
[ 5.906793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.911512] hub 3-2:1.0: 4 ports detected
[ 5.945622] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000)
[ 5.945624] fb: conflicting fb hw usage inteldrmfb vs VESA VGA -
removing generic driver
[ 5.950427] Console: switching to colour dummy device 80x25
[ 5.951515] fbcon: inteldrmfb (fb0) is primary device
[ 6.186212] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 6.200498] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.201158] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.201314] usb 3-2.4: New USB device found, idVendor=05e3,
idProduct=0608
[ 6.201321] usb 3-2.4: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 6.201327] usb 3-2.4: Product: USB2.0 Hub
[ 6.202290] hub 3-2.4:1.0: USB hub found
[ 6.202750] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.202925] hub 3-2.4:1.0: 4 ports detected
[ 6.313235] Console: switching to colour frame buffer device 236x63
[ 6.334979] fb0: inteldrmfb frame buffer device
[ 6.335054] drm: registered panic notifier
[ 6.335313] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 6.338677] acpi device:2e: registered as cooling_device4
[ 6.338816] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input8
[ 6.339007] ACPI: Video Device [PEGP] (multi-head: yes rom: yes
post: no)
[ 6.343258] acpi device:32: registered as cooling_device5
[ 6.343536] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 6.343717] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 6.343857] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 6.402163] Btrfs loaded
[ 6.443076] md: linear personality registered for level -1
[ 6.478910] device-mapper: uevent: version 1.0.3
[ 6.479053] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 6.482774] usb 3-2.4.4: new low-speed USB device number 5 using xhci_hcd
[ 6.501092] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.503088] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.504086] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.504375] usb 3-2.4.4: New USB device found, idVendor=046d,
idProduct=c063
[ 6.509607] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.514763] usb 3-2.4.4: Product: DELL USB Laser Mouse
[ 6.519906] usb 3-2.4.4: Manufacturer: DELL
[ 6.525207] usb 3-2.4.4: ep 0x81 - rounding interval to 64
microframes, ep desc says 80 microframes
[ 6.536487] input: DELL DELL USB Laser Mouse as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/input/input10
[ 6.542117] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID
v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:04:00.0-2.4.4/input0
[ 39.516864] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 39.516868] PM: Marking nosave pages: 00000000b5a28000 - 00000000b6e29000
[ 39.516926] PM: Marking nosave pages: 00000000b886a000 - 00000000b8ab3000
[ 39.516934] PM: Marking nosave pages: 00000000bac8f000 - 00000000bafff000
[ 39.516945] PM: Marking nosave pages: 00000000bb000000 - 0000000100000000
[ 39.517655] PM: Basic memory bitmaps created
[ 39.540690] PM: Basic memory bitmaps freed
[ 39.540694] video LNXVIDEO:00: Restoring backlight state
[ 39.540695] video LNXVIDEO:01: Restoring backlight state
[ 39.590164] PM: Starting manual resume from disk
[ 39.595666] PM: Hibernation image partition 253:3 present
[ 39.595669] PM: Looking for hibernation image.
[ 39.597171] PM: Image not found (code -22)
[ 39.597173] PM: Hibernation image not present or could not be loaded.
[ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1
transid 21081 /dev/mapper/system-root
[ 39.616353] btrfs: turning off barriers
[ 39.616356] btrfs: enabling auto defrag
[ 39.616357] btrfs: use lzo compression
[ 39.616358] btrfs: disk space caching is enabled
[ 39.661102] Btrfs detected SSD devices, enabling SSD mode
[ 40.401467] btrfs: turning off barriers
[ 40.407291] btrfs: enabling auto defrag
[ 40.407352] btrfs: use lzo compression
[ 40.418719] btrfs: disk space caching is enabled
[ 40.683437] systemd[1]: systemd 37 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 40.731811] systemd[1]: Set hostname to <xps15z.cristianrodriguez.net>.
[ 41.272117] udevd[606]: starting version 173
[ 41.435290] mei: module is from the staging directory, the quality is
unknown, you have been warned.
[ 41.435823] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:16.0[A] _PRT entry
[ 41.435829] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 41.435834] mei 0000:00:16.0: setting latency timer to 64
[ 41.435901] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 41.473031] iTCO_vendor_support: vendor-support=0
[ 41.477614] pci_irq-0373 [00] pci_irq_lookup : Found
0000:06:00.0[A] _PRT entry
[ 41.477622] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 41.477633] atl1c 0000:06:00.0: setting latency timer to 64
[ 41.487779] mtp-probe[752]: checking bus 3, device 2:
"/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1"
[ 41.497929] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1f.3[C] _PRT entry
[ 41.497940] IOAPIC[0]: Set routing entry (2-18 -> 0xb9 -> IRQ 18
Mode:1 Active:1 Dest:1)
[ 41.497946] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B9 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 41.497951] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 41.503468] mtp-probe[752]: bus: 3, device: 2 was not an MTP device
[ 41.508295] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 41.508873] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 41.528598] mtp-probe[776]: checking bus 3, device 5:
"/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4"
[ 41.533704] mtp-probe[776]: bus: 3, device: 5 was not an MTP device
[ 41.538647] btrfs: turning off barriers
[ 41.538650] btrfs: enabling auto defrag
[ 41.538653] btrfs: use lzo compression
[ 41.538653] btrfs: disk space caching is enabled
[ 41.559847] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 41.568681] mtp-probe[794]: checking bus 1, device 3:
"/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4"
[ 41.570805] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 41.578853] mtp-probe[794]: bus: 1, device: 3 was not an MTP device
[ 41.587647] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[ 41.593026] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 41.597648] Bluetooth: Core ver 2.16
[ 41.603983] NET: Registered protocol family 31
[ 41.608008] ACPI: AC Adapter [ADP0] (on-line)
[ 41.614610] Bluetooth: HCI device and connection manager initialized
[ 41.614613] Bluetooth: HCI socket layer initialized
[ 41.614615] Bluetooth: L2CAP socket layer initialized
[ 41.614622] Bluetooth: SCO socket layer initialized
[ 41.640484] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 41.643741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 41.646724] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 41.654637] microcode: Microcode Update Driver: v2.00
<tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[ 41.676921] ACPI: Deprecated procfs I/F for battery is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 41.681836] ACPI: Battery Slot [BAT0] (battery present)
[ 41.687239] wmi: Mapper loaded
[ 41.693494] Linux video capture interface: v2.00
[ 41.701454] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 41.701861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 41.701932] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 41.702023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 41.702161] usbcore: registered new interface driver btusb
[ 41.731287] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda caddy
[ 41.731291] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 41.733075] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 41.742658] cfg80211: Calling CRDA to update world regulatory domain
[ 41.755562] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 41.766095] uvcvideo: Found UVC 1.00 device
Laptop_Integrated_Webcam_2HDM (0c45:642a)
[ 41.772757] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 41.778771] Copyright(c) 2003-2011 Intel Corporation
[ 41.778833] input: Laptop_Integrated_Webcam_2HDM as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[ 41.778960] usbcore: registered new interface driver uvcvideo
[ 41.778962] USB Video Class driver (1.1.1)
[ 41.802479] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1b.0[A] _PRT entry
[ 41.807306] pci_irq-0373 [00] pci_irq_lookup : Found
0000:03:00.0[A] _PRT entry
[ 41.807313] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 41.807344] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 41.807397] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 41.807399] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057fc000
[ 41.807401] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 41.807630] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X
[ 41.807715] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R)
Advanced-N 6230 AGN, REV=0xB0
[ 41.807861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 41.823275] iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 41.823278] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 41.823280] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 41.823300] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[ 41.829386] ifup[893]: Service network not started and mode 'auto' ->
skipping
[ 41.852847] cfg80211: World regulatory domain updated:
[ 41.852849] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 41.852850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.852852] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 41.852853] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 41.852854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.852855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.920210] IOAPIC[0]: Set routing entry (2-22 -> 0xc9 -> IRQ 22
Mode:1 Active:1 Dest:1)
[ 41.920216] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:C9 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 41.920221] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 41.920290] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 41.920313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 41.920845] input: Dell WMI hotkeys as /devices/virtual/input/input13
[ 41.940703] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.1
build 33993
[ 41.940849] Registered led device: phy0-led
[ 41.964426] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 42.010557] ifup[964]: Service network not started and mode 'auto' ->
skipping
[ 42.174781] Adding 2097148k swap on /dev/mapper/system-swap.
Priority:0 extents:1 across:2097148k SS
[ 44.925951] ALSA hda_intel.c:812 azx_get_response timeout, switching
to polling mode: last cmd=0x000f0000
[ 45.437474] ALSA patch_realtek.c:1261 SKU: Nid=0x1d sku_cfg=0x40179a2d
[ 45.437477] ALSA patch_realtek.c:1263 SKU: port_connectivity=0x1
[ 45.437478] ALSA patch_realtek.c:1264 SKU: enable_pcbeep=0x1
[ 45.437480] ALSA patch_realtek.c:1265 SKU: check_sum=0x00000007
[ 45.437481] ALSA patch_realtek.c:1266 SKU: customization=0x0000009a
[ 45.437482] ALSA patch_realtek.c:1267 SKU: external_amp=0x5
[ 45.437483] ALSA patch_realtek.c:1268 SKU: platform_type=0x1
[ 45.437485] ALSA patch_realtek.c:1269 SKU: swap=0x0
[ 45.437486] ALSA patch_realtek.c:1270 SKU: override=0x1
[ 45.437895] ALSA hda_codec.c:4951 autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 45.437897] ALSA hda_codec.c:4955 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 45.437899] ALSA hda_codec.c:4959 hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 45.437900] ALSA hda_codec.c:4960 mono: mono_out=0x0
[ 45.437901] ALSA hda_codec.c:4964 inputs:
[ 45.437903] ALSA hda_codec.c:4968 Internal Mic=0x12
[ 45.437904] ALSA hda_codec.c:4968 Mic=0x18
[ 45.437905] ALSA hda_codec.c:4970
[ 45.439163] ALSA patch_realtek.c:1324 realtek: No valid SSID,
checking pincfg 0x40179a2d for NID 0x1d
[ 45.439165] ALSA patch_realtek.c:1340 realtek: Enabling init
ASM_ID=0x9a2d CODEC_ID=10ec0269
[ 45.443482] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 45.448591] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 45.453689] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 45.458609] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 45.710010] systemd-cryptsetup[1010]: Volume cr_sda2 already active.
[ 45.787497] systemd-fsck[1005]: /dev/sda1: limpio, 63/40000 ficheros,
137097/159744 bloques
[ 45.824455] device fsid 403609d3-a44c-4bb6-99c4-8be5430433e7 devid 1
transid 22126 /dev/mapper/system-home
[ 45.829949] btrfs: turning off barriers
[ 45.834896] btrfs: enabling auto defrag
[ 45.834957] btrfs: use lzo compression
[ 45.840735] EXT4-fs (sda1): barriers disabled
[ 45.849518] btrfs: disk space caching is enabled
[ 45.854628] EXT4-fs (sda1): mounted filesystem with writeback data
mode. Opts: acl,barrier=0,data=writeback,user_xattr
[ 45.869431] Btrfs detected SSD devices, enabling SSD mode
[ 47.174579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.174581] Bluetooth: BNEP filters: protocol multicast
[ 47.205249] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 47.215832] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 47.337233] Bluetooth: RFCOMM TTY layer initialized
[ 47.337238] Bluetooth: RFCOMM socket layer initialized
[ 47.337239] Bluetooth: RFCOMM ver 1.11
[ 47.505097] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 47.511590] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 47.635461] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X
[ 47.635523] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps
Full Duplex>
[ 47.648775] NET: Registered protocol family 17
[ 48.961311] EXT4-fs (sda1): re-mounted. Opts:
acl,barrier=0,data=writeback,user_xattr,commit=0
[ 96.852567] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 96.855107] wlan0: authenticated
[ 96.896863] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 96.903865] wlan0: RX AssocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 96.903869] wlan0: associated
[ 106.895705] wlan0: disassociating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 106.909897] cfg80211: Calling CRDA to update world regulatory domain
[ 106.912356] cfg80211: World regulatory domain updated:
[ 106.912359] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 106.912361] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 106.912363] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 106.912365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 106.912366] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 106.912367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 110.146828] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 110.149314] wlan0: authenticated
[ 110.154157] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 110.159155] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 110.159157] wlan0: associated
[ 120.042706] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 120.054236] cfg80211: Calling CRDA to update world regulatory domain
[ 120.056757] cfg80211: World regulatory domain updated:
[ 120.056761] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 120.056763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 120.056764] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 120.056766] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 120.056767] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 120.056769] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 138.190818] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 138.193402] wlan0: authenticated
[ 138.196754] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 138.201826] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 138.201840] wlan0: associated
[ 148.192646] wlan0: disassociating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 148.206339] cfg80211: Calling CRDA to update world regulatory domain
[ 148.208741] cfg80211: World regulatory domain updated:
[ 148.208744] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 148.208746] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 148.208748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 148.208749] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 148.208751] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 148.208752] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 151.443088] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 151.445498] wlan0: authenticated
[ 151.446657] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 151.451688] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 151.451691] wlan0: associated
[ 159.980012] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 159.992768] cfg80211: Calling CRDA to update world regulatory domain
[ 159.995101] cfg80211: World regulatory domain updated:
[ 159.995104] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 159.995106] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 159.995108] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 159.995109] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 159.995111] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 159.995112] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 172.519660] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 172.522038] wlan0: authenticated
[ 172.525229] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 172.530226] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 172.530229] wlan0: associated
[ 182.521101] wlan0: disassociating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 182.535253] cfg80211: Calling CRDA to update world regulatory domain
[ 182.537720] cfg80211: World regulatory domain updated:
[ 182.537723] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 182.537725] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 182.537727] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 182.537728] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 182.537730] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 182.537731] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 185.803811] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 185.806245] wlan0: authenticated
[ 185.807952] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 185.814223] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 185.814226] wlan0: associated
[ 194.926199] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 194.939848] cfg80211: Calling CRDA to update world regulatory domain
[ 194.942320] cfg80211: World regulatory domain updated:
[ 194.942323] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 194.942325] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 194.942326] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 194.942328] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 194.942329] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 194.942331] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 200.611067] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 200.617743] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 200.746343] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X
[ 200.746502] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps
Full Duplex>
[ 215.864303] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 215.867879] wlan0: authenticated
[ 215.871819] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 215.878327] wlan0: RX AssocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 215.878330] wlan0: associated
[ 225.870530] wlan0: disassociating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 225.885706] cfg80211: Calling CRDA to update world regulatory domain
[ 225.888475] cfg80211: World regulatory domain updated:
[ 225.888479] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 225.888481] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 225.888483] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 225.888484] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 225.888486] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 225.888487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 229.142454] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 229.145043] wlan0: authenticated
[ 229.146399] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 229.151507] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 229.151510] wlan0: associated
[ 237.860170] wlan0: deauthenticating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 237.878971] cfg80211: Calling CRDA to update world regulatory domain
[ 237.881425] cfg80211: World regulatory domain updated:
[ 237.881428] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 237.881430] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 237.881431] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 237.881433] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 237.881434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 237.881436] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 253.367126] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 253.371335] wlan0: authenticated
[ 253.372468] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 253.377431] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 253.377434] wlan0: associated
[ 263.368490] wlan0: disassociating from 06:1c:f0:60:61:11 by local
choice (reason=3)
[ 263.381771] cfg80211: Calling CRDA to update world regulatory domain
[ 263.384197] cfg80211: World regulatory domain updated:
[ 263.384200] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 263.384202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 263.384203] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 263.384205] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 263.384206] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 263.384208] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 266.659599] wlan0: authenticate with 06:1c:f0:60:61:11 (try 1)
[ 266.662253] wlan0: authenticated
[ 266.665307] wlan0: associate with 06:1c:f0:60:61:11 (try 1)
[ 266.670391] wlan0: RX ReassocResp from 06:1c:f0:60:61:11 (capab=0x431
status=0 aid=1)
[ 266.670394] wlan0: associated
root@xps15z:/home/crrodriguez # ls
abuild .cache .emacs .gconf
home:elvigia:nfs-systemd .kchmviewer .mozilla .profile
.qmmp .skel .vim .xim.template
.zsh-update
.adobe .config esc.php .gitconfig
.htoprc .kde4 Música public_html
.quiltrc .ssh .viminfo .xinitrc.template
.aqemu .dbus Escritorio .gnome2
Imágenes .kderc .oh-my-zsh Público
.rcc .subversion .vim_local .xsession-errors
attachments Descargas .esd_auth .gstreamer-0.10
.inputrc .lastpass .osc_cookiejar .pulse
rpmbuild systemd.svg .vimrc yankring_history_v2.txt
.bash_history .dmrc .fontconfig .gtkrc-2.0-kde4
isos .lesshst .oscrc .pulse-cookie
.rpmmacros .thumbnails vms .zcompdump
.bashrc Documentos .fonts .gvfs
.java .local .pki pulseverbose.log
.scanview.cfg .thunderbird .wine .zsh_history
bin dotvim .fonts.conf home:elvigia:branches:network
jdk-7u2-linux-x64.rpm .macromedia Plantillas .pyhistory
scm Vídeos .Xauthority .zshrc
root@xps15z:/home/crrodriguez # ls
abuild .cache .emacs .gconf
home:elvigia:nfs-systemd .kchmviewer .mozilla .profile
.qmmp .skel .vim .xim.template
.zsh-update
.adobe .config esc.php .gitconfig
.htoprc .kde4 Música public_html
.quiltrc .ssh .viminfo .xinitrc.template
.aqemu .dbus Escritorio .gnome2
Imágenes .kderc .oh-my-zsh Público
.rcc .subversion .vim_local .xsession-errors
attachments Descargas .esd_auth .gstreamer-0.10
.inputrc .lastpass .osc_cookiejar .pulse
rpmbuild systemd.svg .vimrc yankring_history_v2.txt
.bash_history .dmrc .fontconfig .gtkrc-2.0-kde4
isos .lesshst .oscrc .pulse-cookie
.rpmmacros .thumbnails vms .zcompdump
.bashrc Documentos .fonts .gvfs
.java .local .pki pulseverbose.log
.scanview.cfg .thunderbird .wine .zsh_history
bin dotvim .fonts.conf home:elvigia:branches:network
jdk-7u2-linux-x64.rpm .macromedia Plantillas .pyhistory
scm Vídeos .Xauthority .zshrc
root@xps15z:/home/crrodriguez # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc6-3-desktop (geeko@buildhost) (gcc
version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Dec 22 15:05:54 UTC 2011
(c4246bf)
[ 0.000000] Command line:
root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9
resume=/dev/system/swap splash=verbose clocksource=hpet hpet64
ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug
i8042.debug vga=0x31b
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5a28000 (usable)
[ 0.000000] BIOS-e820: 00000000b5a28000 - 00000000b6e29000 (reserved)
[ 0.000000] BIOS-e820: 00000000b6e29000 - 00000000b886a000 (usable)
[ 0.000000] BIOS-e820: 00000000b886a000 - 00000000b8ab3000 (reserved)
[ 0.000000] BIOS-e820: 00000000b8ab3000 - 00000000bac8f000 (usable)
[ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bad2e000 (reserved)
[ 0.000000] BIOS-e820: 00000000bad2e000 - 00000000bad3d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bad3d000 - 00000000badfb000 (reserved)
[ 0.000000] BIOS-e820: 00000000badfb000 - 00000000badfd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000badfd000 - 00000000badff000 (reserved)
[ 0.000000] BIOS-e820: 00000000badff000 - 00000000bae02000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae02000 - 00000000bae0a000 (reserved)
[ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved)
[ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Dell System XPS 15Z/00WW5M, BIOS
A08 12/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] Scan SMP from ffff88000009d800 for 1024 bytes.
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[ 0.000000] 0000000000 - 00bb000000 page 2M
[ 0.000000] kernel direct mapping tables up to bb000000 @
1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
[ 0.000000] 0100000000 - 023fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 23fe00000 @
bac85000-bac8f000
[ 0.000000] RAMDISK: 373d9000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09
00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 00000000baff0000 000F4 (v03 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000baff3000 08A57 (v02 DELL SNB-CPT
00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf40000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09
00000002 LOHR 00000001)
[ 0.000000] ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc
00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000baff2000 000A5 (v32 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000bafef000 00038 (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000bafee000 00098 (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000bafed000 0003C (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000bafec000 00B3B (v01 NvORef NvOptTbl
00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafeb000 00846 (v01 PmRef Cpu0Ist
00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafea000 00996 (v01 PmRef CpuPm
00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe9000 0003E (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bafe8000 00042 (v01 PTL COMBUF
00000001 PTL 00000001)
[ 0.000000] ACPI: DMAR 00000000bafe7000 000E8 (v01 INTEL SNB
00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000bafe6000 0022E (v01 DELL QA09
00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
[ 0.000000] NODE_DATA [000000023fdec000 - 000000023fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD ->
[ffff880237400000-ffff88023e3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000b5a28
[ 0.000000] 0: 0x000b6e29 -> 0x000b886a
[ 0.000000] 0: 0x000b8ab3 -> 0x000bac8f
[ 0.000000] 0: 0x000bafff -> 0x000bb000
[ 0.000000] 0: 0x00100000 -> 0x0023fe00
[ 0.000000] On node 0 totalpages: 2069459
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 740990 pages, LIFO batch:31
[ 0.000000] Normal zone: 17913 pages used for memmap
[ 0.000000] Normal zone: 1292295 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2,
APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2,
APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2,
APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2,
APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2,
APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2,
APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2,
APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2,
APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2,
APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2,
APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2,
APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2,
APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2,
APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2,
APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2,
APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b5a28000 -
00000000b6e29000
[ 0.000000] PM: Registered nosave memory: 00000000b886a000 -
00000000b8ab3000
[ 0.000000] PM: Registered nosave memory: 00000000bac8f000 -
00000000bad2e000
[ 0.000000] PM: Registered nosave memory: 00000000bad2e000 -
00000000bad3d000
[ 0.000000] PM: Registered nosave memory: 00000000bad3d000 -
00000000badfb000
[ 0.000000] PM: Registered nosave memory: 00000000badfb000 -
00000000badfd000
[ 0.000000] PM: Registered nosave memory: 00000000badfd000 -
00000000badff000
[ 0.000000] PM: Registered nosave memory: 00000000badff000 -
00000000bae02000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 -
00000000bae0a000
[ 0.000000] PM: Registered nosave memory: 00000000bae0a000 -
00000000bae1b000
[ 0.000000] PM: Registered nosave memory: 00000000bae1b000 -
00000000baf18000
[ 0.000000] PM: Registered nosave memory: 00000000baf18000 -
00000000baf1c000
[ 0.000000] PM: Registered nosave memory: 00000000baf1c000 -
00000000baf1f000
[ 0.000000] PM: Registered nosave memory: 00000000baf1f000 -
00000000baf9f000
[ 0.000000] PM: Registered nosave memory: 00000000baf9f000 -
00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 -
00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 -
00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 -
00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 -
00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap:
bfa00000:38600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79744
r8192 d22656 u262144
[ 0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2037205
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=/dev/disk/by-uuid/ca00ffff-8c21-4750-b25c-3cf321a07dd9
resume=/dev/system/swap splash=verbose clocksource=hpet hpet64
ipv6.disable=1 elevator=noop acpi.debug_layer=0x400000 apic=debug
i8042.debug vga=0x31b
[ 0.000000] bootsplash: verbose mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8067344k/9435136k available (5935k kernel code,
1157300k absent, 210492k reserved, 7648k data, 944k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet timer0 configured in 64-bit mode
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2793.229 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5586.45 BogoMIPS (lpj=2793229)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000037] Security Framework initialized
[ 0.000049] AppArmor: AppArmor initialized
[ 0.000647] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.002144] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.002776] Mount-cache hash table entries: 256
[ 0.002859] Initializing cgroup subsys cpuacct
[ 0.002863] Initializing cgroup subsys memory
[ 0.002877] Initializing cgroup subsys devices
[ 0.002880] Initializing cgroup subsys freezer
[ 0.002882] Initializing cgroup subsys net_cls
[ 0.002884] Initializing cgroup subsys blkio
[ 0.002890] Initializing cgroup subsys perf_event
[ 0.002912] Disabled fast string operations
[ 0.002915] CPU: Physical Processor ID: 0
[ 0.002917] CPU: Processor Core ID: 0
[ 0.002921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002922] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.002927] mce: CPU supports 7 MCE banks
[ 0.002936] CPU0: Thermal monitoring handled by SMI
[ 0.002941] using mwait in idle threads.
[ 0.003584] ACPI: Core revision 20110623
[ 0.059768] Getting VERSION: 1060015
[ 0.059771] Getting VERSION: 1060015
[ 0.059773] Getting ID: 0
[ 0.059774] Getting ID: 0
[ 0.059783] DMAR: Host address width 36
[ 0.059786] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.059792] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
c0000020e60262 ecap f0101a
[ 0.059796] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.059801] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
c9008020660262 ecap f0105a
[ 0.059804] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff
[ 0.059807] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
[ 0.059879] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.059881] HPET id 0 under DRHD base 0xfed91000
[ 0.059884] HPET id 0 under DRHD base 0xfed91000
[ 0.059886] HPET id 0 under DRHD base 0xfed91000
[ 0.059888] HPET id 0 under DRHD base 0xfed91000
[ 0.059890] HPET id 0 under DRHD base 0xfed91000
[ 0.059892] HPET id 0 under DRHD base 0xfed91000
[ 0.059894] HPET id 0 under DRHD base 0xfed91000
[ 0.059896] HPET id 0 under DRHD base 0xfed91000
[ 0.060143] Enabled IRQ remapping in x2apic mode
[ 0.060146] Enabling x2apic
[ 0.060148] Enabled x2apic
[ 0.060153] Switched APIC routing to cluster x2apic.
[ 0.060158] enabled ExtINT on CPU#0
[ 0.060404] ESR value before enabling vector: 0x00000080 after:
0x00000000
[ 0.060421] ENABLING IO-APIC IRQs
[ 0.060423] init IO_APIC IRQs
[ 0.060424] apic 2 pin 0 not connected
[ 0.060427] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.060431] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060436] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0
Active:0 Dest:1)
[ 0.060439] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060443] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0
Active:0 Dest:1)
[ 0.060446] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:33 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060450] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:1)
[ 0.060453] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060457] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0
Active:0 Dest:1)
[ 0.060460] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:35 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060465] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:1)
[ 0.060467] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:36 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060472] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:1)
[ 0.060475] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:37 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060479] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.060482] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060486] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1
Active:0 Dest:1)
[ 0.060489] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060493] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10
Mode:0 Active:0 Dest:1)
[ 0.060496] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3A Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060500] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11
Mode:0 Active:0 Dest:1)
[ 0.060503] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3B Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060507] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12
Mode:0 Active:0 Dest:1)
[ 0.060510] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060514] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13
Mode:0 Active:0 Dest:1)
[ 0.060517] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060521] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14
Mode:0 Active:0 Dest:1)
[ 0.060524] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3E Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060528] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15
Mode:0 Active:0 Dest:1)
[ 0.060531] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3F Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.060535] apic 2 pin 16 not connected
[ 0.060536] apic 2 pin 17 not connected
[ 0.060537] apic 2 pin 18 not connected
[ 0.060538] apic 2 pin 19 not connected
[ 0.060538] apic 2 pin 20 not connected
[ 0.060539] apic 2 pin 21 not connected
[ 0.060540] apic 2 pin 22 not connected
[ 0.060541] apic 2 pin 23 not connected
[ 0.060679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070666] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.070671] Using local APIC timer interrupts.
[ 0.070671] calibrating APIC timer ...
[ 0.172123] ... lapic delta = 623574
[ 0.172125] ... PM-Timer delta = 357949
[ 0.172126] ... PM-Timer result ok
[ 0.172128] ..... delta 623574
[ 0.172130] ..... mult: 26786370
[ 0.172132] ..... calibration result: 99771
[ 0.172134] ..... CPU clock speed is 2793.0611 MHz.
[ 0.172136] ..... host bus clock speed is 99.0771 MHz.
[ 0.172144] Performance Events: PEBS fmt1+, SandyBridge events, Intel
PMU driver.
[ 0.172150] PEBS disabled due to CPU errata.
[ 0.172154] ... version: 3
[ 0.172155] ... bit width: 48
[ 0.172157] ... generic registers: 4
[ 0.172159] ... value mask: 0000ffffffffffff
[ 0.172162] ... max period: 000000007fffffff
[ 0.172164] ... fixed-purpose events: 3
[ 0.172166] ... event mask: 000000070000000f
[ 0.180330] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.188150] Booting Node 0, Processors #1
[ 0.188160] smpboot cpu 1: start_ip = 98000
[ 0.199162] masked ExtINT on CPU#1
[ 0.259011] Disabled fast string operations
[ 0.259023] CPU1: Thermal monitoring handled by SMI
[ 0.279047] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.285004] #2
[ 0.285010] smpboot cpu 2: start_ip = 98000
[ 0.296013] masked ExtINT on CPU#2
[ 0.355853] Disabled fast string operations
[ 0.355864] CPU2: Thermal monitoring handled by SMI
[ 0.375921] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.381847] #3
[ 0.381852] smpboot cpu 3: start_ip = 98000
[ 0.392852] masked ExtINT on CPU#3
[ 0.452696] Disabled fast string operations
[ 0.452707] CPU3: Thermal monitoring handled by SMI
[ 0.472765] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.474664] Brought up 4 CPUs
[ 0.474673] Total of 4 processors activated (22346.24 BogoMIPS).
[ 0.478171] devtmpfs: initialized
[ 0.478919] PM: Registering ACPI NVS region at bad2e000 (61440 bytes)
[ 0.478924] PM: Registering ACPI NVS region at badfb000 (8192 bytes)
[ 0.478927] PM: Registering ACPI NVS region at badff000 (12288 bytes)
[ 0.478930] PM: Registering ACPI NVS region at bae0a000 (69632 bytes)
[ 0.478934] PM: Registering ACPI NVS region at baf18000 (16384 bytes)
[ 0.478938] PM: Registering ACPI NVS region at baf1f000 (524288 bytes)
[ 0.479061] print_constraints: dummy:
[ 0.479091] RTC time: 1:23:20, date: 12/27/11
[ 0.479128] NET: Registered protocol family 16
[ 0.479269] ACPI: bus type pci registered
[ 0.479329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.479334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.489012] PCI: Using configuration type 1 for base access
[ 0.489769] bio: create slab <bio-0> at 0
[ 0.489840] ACPI: Added _OSI(Module Device)
[ 0.489843] ACPI: Added _OSI(Processor Device)
[ 0.489846] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489848] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.491351] ACPI: EC: Look up EC in DSDT
[ 0.492860] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.499730] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.500574] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst
00003001 INTL 20061109)
[ 0.500979] ACPI: Dynamic OEM Table Load:
[ 0.500982] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst
00003001 INTL 20061109)
[ 0.506049] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst
00003000 INTL 20061109)
[ 0.506495] ACPI: Dynamic OEM Table Load:
[ 0.506498] ACPI: SSDT (null) 00303 (v01 PmRef ApIst
00003000 INTL 20061109)
[ 0.508778] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst
00003000 INTL 20061109)
[ 0.509171] ACPI: Dynamic OEM Table Load:
[ 0.509173] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20061109)
[ 0.514717] ACPI: Interpreter enabled
[ 0.514722] ACPI: (supports S0 S3 S4 S5)
[ 0.514744] ACPI: Using IOAPIC for interrupt routing
[ 0.520280] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.520446] ACPI: No dock devices found.
[ 0.520448] HEST: Table not found.
[ 0.520451] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.520852] \_SB_.PCI0:_OSC invalid UUID
[ 0.520853] _OSC request data:1 8 1f
[ 0.520856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.521533] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.521537] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.521540] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.521544] pci_root PNP0A08:00: host bridge window [mem
0xbfa00000-0xfeafffff]
[ 0.521548] pci_root PNP0A08:00: host bridge window [mem
0xfed40000-0xfed44fff]
[ 0.521559] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.521591] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.521611] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.521613] pci 0000:00:01.0: PME# disabled
[ 0.521630] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[ 0.521639] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.521644] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.521648] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.521692] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.521714] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit]
[ 0.521774] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.521778] pci 0000:00:16.0: PME# disabled
[ 0.521808] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.521828] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff]
[ 0.521898] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.521902] pci 0000:00:1a.0: PME# disabled
[ 0.521925] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.521939] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit]
[ 0.521991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.521994] pci 0000:00:1b.0: PME# disabled
[ 0.522016] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.522075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.522079] pci 0000:00:1c.0: PME# disabled
[ 0.522103] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.522162] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.522166] pci 0000:00:1c.1: PME# disabled
[ 0.522190] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.522249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.522253] pci 0000:00:1c.3: PME# disabled
[ 0.522277] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.522335] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.522339] pci 0000:00:1c.4: PME# disabled
[ 0.522363] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 0.522422] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.522426] pci 0000:00:1c.5: PME# disabled
[ 0.522455] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.522475] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff]
[ 0.522544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.522548] pci 0000:00:1d.0: PME# disabled
[ 0.522571] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
[ 0.522685] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 0.522702] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.522710] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.522717] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.522725] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.522732] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.522740] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff]
[ 0.522770] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.522774] pci 0000:00:1f.2: PME# disabled
[ 0.522791] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.522805] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit]
[ 0.522826] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.522875] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300
[ 0.522882] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[ 0.522890] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.522898] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff
64bit pref]
[ 0.522903] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.522909] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.524596] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.524609] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.524616] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.524626] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 0.524698] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.524908] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280
[ 0.525049] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit]
[ 0.525618] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.525652] pci 0000:03:00.0: PME# disabled
[ 0.527703] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.527711] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff]
[ 0.527783] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
[ 0.527808] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit]
[ 0.527912] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.527917] pci 0000:04:00.0: PME# disabled
[ 0.529595] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.529614] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff]
[ 0.529692] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.529700] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.529769] pci 0000:06:00.0: [1969:1083] type 0 class 0x000200
[ 0.529796] pci 0000:06:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit]
[ 0.529810] pci 0000:06:00.0: reg 18: [io 0x2000-0x207f]
[ 0.529905] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.529910] pci 0000:06:00.0: PME# disabled
[ 0.531592] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.531606] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.531617] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.531674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.531763] 0000:00:1f[A] -> [21]
[ 0.531766] 0000:00:1f[B] -> [19]
[ 0.531769] 0000:00:1f[C] -> [18]
[ 0.531771] 0000:00:1f[D] -> [16]
[ 0.531773] 0000:00:1d[A] -> [23]
[ 0.531776] 0000:00:1a[A] -> [16]
[ 0.531778] 0000:00:1b[A] -> [22]
[ 0.531781] 0000:00:16[A] -> [16]
[ 0.531783] 0000:00:16[B] -> [19]
[ 0.531785] 0000:00:16[C] -> [18]
[ 0.531788] 0000:00:16[D] -> [17]
[ 0.531790] 0000:00:1c[A] -> [16]
[ 0.531792] 0000:00:1c[B] -> [17]
[ 0.531795] 0000:00:1c[C] -> [18]
[ 0.531797] 0000:00:1c[D] -> [19]
[ 0.531799] 0000:00:01[A] -> [16]
[ 0.531802] 0000:00:01[B] -> [17]
[ 0.531804] 0000:00:01[C] -> [18]
[ 0.531806] 0000:00:01[D] -> [19]
[ 0.531809] 0000:00:02[A] -> [16]
[ 0.531811] 0000:00:04[A] -> [16]
[ 0.531813] 0000:00:04[B] -> [17]
[ 0.531816] 0000:00:04[C] -> [18]
[ 0.531818] 0000:00:04[D] -> [19]
[ 0.531840] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.0 is a PCI bridge
[ 0.531846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.531874] 0000:02:00[A] -> [16]
[ 0.531877] 0000:02:00[B] -> [17]
[ 0.531879] 0000:02:00[C] -> [18]
[ 0.531882] 0000:02:00[D] -> [19]
[ 0.531890] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.1 is a PCI bridge
[ 0.531896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.531923] 0000:03:00[A] -> [17]
[ 0.531925] 0000:03:00[B] -> [18]
[ 0.531928] 0000:03:00[C] -> [19]
[ 0.531930] 0000:03:00[D] -> [16]
[ 0.531940] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.3 is a PCI bridge
[ 0.531945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.531972] 0000:04:00[A] -> [19]
[ 0.531974] 0000:04:00[B] -> [16]
[ 0.531977] 0000:04:00[C] -> [17]
[ 0.531979] 0000:04:00[D] -> [18]
[ 0.531988] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.4 is a PCI bridge
[ 0.531994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.532020] 0000:05:00[A] -> [16]
[ 0.532023] 0000:05:00[B] -> [17]
[ 0.532025] 0000:05:00[C] -> [18]
[ 0.532028] 0000:05:00[D] -> [19]
[ 0.532053] pci_bind-0085 [00] pci_bind : Device
0000:00:1c.5 is a PCI bridge
[ 0.532058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.532085] 0000:06:00[A] -> [17]
[ 0.532087] 0000:06:00[B] -> [18]
[ 0.532090] 0000:06:00[C] -> [19]
[ 0.532092] 0000:06:00[D] -> [16]
[ 0.532109] pci_bind-0085 [00] pci_bind : Device
0000:00:01.0 is a PCI bridge
[ 0.532114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.532141] 0000:01:00[A] -> [16]
[ 0.532143] 0000:01:00[B] -> [17]
[ 0.532146] 0000:01:00[C] -> [18]
[ 0.532148] 0000:01:00[D] -> [19]
[ 0.532198] \_SB_.PCI0:_OSC invalid UUID
[ 0.532198] _OSC request data:1 1f 1f
[ 0.532201] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.532239] \_SB_.PCI0:_OSC invalid UUID
[ 0.532240] _OSC request data:1 0 1d
[ 0.532242] pci0000:00: ACPI _OSC request failed (AE_ERROR),
returned control mask: 0x1d
[ 0.532246] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.535536] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535572] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11
[ 0.535577] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12
14 15)
[ 0.535607] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535638] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9
[ 0.535642] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12
14 15) *9
[ 0.535671] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535699] pci_link-0294 [00] pci_link_get_current : Link at IRQ 9
[ 0.535703] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12
14 15) *9
[ 0.535731] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535759] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10
[ 0.535763] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12
14 15)
[ 0.535790] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535818] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0
[ 0.535822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.535850] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535878] pci_link-0294 [00] pci_link_get_current : Link at IRQ 0
[ 0.535882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.535911] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535939] pci_link-0294 [00] pci_link_get_current : Link at IRQ 10
[ 0.535942] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12
14 15)
[ 0.535970] pci_link-0190 [00] pci_link_get_possible : Found 10
possible IRQs
[ 0.535998] pci_link-0294 [00] pci_link_get_current : Link at IRQ 11
[ 0.536002] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12
14 15)
[ 0.536069] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.536078] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.536083] vgaarb: loaded
[ 0.536085] vgaarb: bridge control possible 0000:01:00.0
[ 0.536087] vgaarb: no bridge control possible 0000:00:02.0
[ 0.536179] SCSI subsystem initialized
[ 0.536213] libata version 3.00 loaded.
[ 0.536245] usbcore: registered new interface driver usbfs
[ 0.536257] usbcore: registered new interface driver hub
[ 0.536277] usbcore: registered new device driver usb
[ 0.536324] PCI: Using ACPI for IRQ routing
[ 0.537738] PCI: pci_cache_line_size set to 64 bytes
[ 0.537863] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.537865] reserve RAM buffer: 00000000b5a28000 - 00000000b7ffffff
[ 0.537867] reserve RAM buffer: 00000000b886a000 - 00000000bbffffff
[ 0.537871] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff
[ 0.537874] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.537876] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
[ 0.537947] NetLabel: Initializing
[ 0.537950] NetLabel: domain hash size = 128
[ 0.537952] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.537961] NetLabel: unlabeled traffic allowed by default
[ 0.537971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.537977] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.539993] Switching to clocksource hpet
[ 0.541903] AppArmor: AppArmor Filesystem Enabled
[ 0.541922] pnp: PnP ACPI init
[ 0.541934] ACPI: bus type pnp registered
[ 0.542307] pnp 00:00: [bus 00-3e]
[ 0.542310] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.542311] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.542313] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.542314] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.542316] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.542317] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.542318] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.542320] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.542321] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.542322] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.542324] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.542325] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.542326] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.542328] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.542329] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.542331] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.542332] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.542333] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.542335] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.542374] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.542387] pnp 00:01: [io 0x0000-0x001f]
[ 0.542389] pnp 00:01: [io 0x0081-0x0091]
[ 0.542390] pnp 00:01: [io 0x0093-0x009f]
[ 0.542391] pnp 00:01: [io 0x00c0-0x00df]
[ 0.542392] pnp 00:01: [dma 4]
[ 0.542409] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.542484] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.542501] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.542511] pnp 00:03: [io 0x00f0]
[ 0.542515] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13
Mode:0 Active:0 Dest:1)
[ 0.542519] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542525] pnp 00:03: [irq 13]
[ 0.542541] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.542550] pnp 00:04: [io 0x002e-0x002f]
[ 0.542551] pnp 00:04: [io 0x004e-0x004f]
[ 0.542553] pnp 00:04: [io 0x0061]
[ 0.542555] pnp 00:04: [io 0x0063]
[ 0.542556] pnp 00:04: [io 0x0065]
[ 0.542557] pnp 00:04: [io 0x0067]
[ 0.542558] pnp 00:04: [io 0x0068]
[ 0.542559] pnp 00:04: [io 0x006c]
[ 0.542560] pnp 00:04: [io 0x0070]
[ 0.542561] pnp 00:04: [io 0x0080]
[ 0.542562] pnp 00:04: [io 0x0092]
[ 0.542563] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.542564] pnp 00:04: [io 0x0680-0x069f]
[ 0.542566] pnp 00:04: [io 0x1000-0x1003]
[ 0.542567] pnp 00:04: [io 0x1004-0x1013]
[ 0.542568] pnp 00:04: [io 0xffff]
[ 0.542569] pnp 00:04: [io 0x0400-0x0453]
[ 0.542570] pnp 00:04: [io 0x0458-0x047f]
[ 0.542571] pnp 00:04: [io 0x0500-0x057f]
[ 0.542573] pnp 00:04: [io 0x164e-0x164f]
[ 0.542606] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.542610] system 00:04: [io 0x1000-0x1003] has been reserved
[ 0.542613] system 00:04: [io 0x1004-0x1013] has been reserved
[ 0.542616] system 00:04: [io 0xffff] has been reserved
[ 0.542619] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.542622] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.542625] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.542628] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.542631] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.542639] pnp 00:05: [io 0x0070-0x0077]
[ 0.542641] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.542644] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542649] pnp 00:05: [irq 8]
[ 0.542666] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.542692] pnp 00:06: [io 0x0454-0x0457]
[ 0.542721] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.542724] system 00:06: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.542760] pnp 00:07: [io 0x0060]
[ 0.542761] pnp 00:07: [io 0x0064]
[ 0.542763] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.542766] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542770] pnp 00:07: [irq 1]
[ 0.542788] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.542817] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12
Mode:0 Active:0 Dest:1)
[ 0.542820] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.542824] pnp 00:08: [irq 12]
[ 0.542842] pnp 00:08: Plug and Play ACPI device, IDs DLL0446 PNP0f13
(active)
[ 0.542954] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.542955] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[ 0.542957] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.542958] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.542959] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 0.542960] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.542962] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.542964] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.542965] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.542966] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.542968] pnp 00:09: [mem 0xfffff000-0xffffffff]
[ 0.542980] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because
it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.543006] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.543010] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.543013] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.543017] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.543020] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.543023] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.543027] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.543030] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.543033] system 00:09: [mem 0xff000000-0xffffffff] could not be
reserved
[ 0.543037] system 00:09: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.543047] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.543171] IOAPIC[0]: Set routing entry (2-20 -> 0x49 -> IRQ 20
Mode:0 Active:0 Dest:1)
[ 0.543174] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:49 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.543177] pnp 00:0a: [irq 20]
[ 0.543206] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
[ 0.543336] pnp: PnP ACPI: found 11 devices
[ 0.543338] ACPI: ACPI bus type pnp unregistered
[ 0.549778] pci 0000:01:00.0: no compatible bridge window for [mem
0xfff80000-0xffffffff pref]
[ 0.549785] PCI: max bus depth: 1 pci_try_num: 2
[ 0.549827] pci 0000:01:00.0: BAR 6: assigned [mem
0xf1000000-0xf107ffff pref]
[ 0.549831] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.549834] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.549838] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.549842] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 0.549847] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.549859] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.549865] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff]
[ 0.549874] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.549880] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff]
[ 0.549890] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.549896] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.549905] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.549909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.549915] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.549928] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:01.0[A] _PRT entry
[ 0.549937] IOAPIC[0]: Set routing entry (2-16 -> 0x51 -> IRQ 16
Mode:1 Active:1 Dest:1)
[ 0.549941] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:51 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.549944] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.549948] pci 0000:00:01.0: setting latency timer to 64
[ 0.549954] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.0[A] _PRT entry
[ 0.549959] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.549965] pci 0000:00:1c.0: setting latency timer to 64
[ 0.549971] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.1[B] _PRT entry
[ 0.549977] IOAPIC[0]: Set routing entry (2-17 -> 0x59 -> IRQ 17
Mode:1 Active:1 Dest:1)
[ 0.549980] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:59 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.549983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.549988] pci 0000:00:1c.1: setting latency timer to 64
[ 0.549994] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.3[D] _PRT entry
[ 0.550001] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19
Mode:1 Active:1 Dest:1)
[ 0.550004] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:61 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 0.550006] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.550011] pci 0000:00:1c.3: setting latency timer to 64
[ 0.550017] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.4[A] _PRT entry
[ 0.550022] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.550027] pci 0000:00:1c.4: setting latency timer to 64
[ 0.550039] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1c.5[B] _PRT entry
[ 0.550044] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.550050] pci 0000:00:1c.5: setting latency timer to 64
[ 0.550053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.550054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.550056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.550057] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.550059] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.550060] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.550061] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.550063] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff
64bit pref]
[ 0.550064] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
[ 0.550066] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff]
[ 0.550067] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff]
[ 0.550069] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.550070] pci_bus 0000:06: resource 1 [mem 0xf1800000-0xf18fffff]
[ 0.550125] NET: Registered protocol family 2
[ 0.550318] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.551888] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.553016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.553157] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.553161] TCP reno registered
[ 0.553175] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.553205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.553308] NET: Registered protocol family 1
[ 0.553322] pci 0000:00:02.0: Boot video device
[ 0.553459] PCI: CLS 64 bytes, default 64
[ 0.553496] Unpacking initramfs...
[ 0.723042] Freeing initrd memory: 12380k freed
[ 0.724650] DMAR: No ATSR found
[ 0.724686] IOMMU 0 0xfed90000: using Queued invalidation
[ 0.724688] IOMMU 1 0xfed91000: using Queued invalidation
[ 0.724692] IOMMU: Setting RMRR:
[ 0.724704] IOMMU: Setting identity map for device 0000:00:02.0
[0xbb800000 - 0xbf9fffff]
[ 0.725062] IOMMU: Setting identity map for device 0000:00:1d.0
[0xbae1d000 - 0xbae33fff]
[ 0.725085] IOMMU: Setting identity map for device 0000:00:1a.0
[0xbae1d000 - 0xbae33fff]
[ 0.725099] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 0.725108] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0
- 0xffffff]
[ 0.725335] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 0.727095] audit: initializing netlink socket (disabled)
[ 0.727106] type=2000 audit(1324949000.518:1): initialized
[ 0.749859] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.765057] VFS: Disk quotas dquot_6.5.2
[ 0.765086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.765302] msgmni has been set to 15909
[ 0.765461] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.765486] io scheduler noop registered (default)
[ 0.765491] io scheduler deadline registered
[ 0.765508] io scheduler cfq registered
[ 0.765594] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.765617] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.765914] vesafb: mode is 1280x1024x32, linelength=5120, pages=11
[ 0.765917] vesafb: scrolling: redraw
[ 0.765920] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.767586] vesafb: framebuffer at 0xe0000000, mapped to
0xffffc90005800000, using 10240k, total 65472k
[ 0.767738] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 0.767739] bootsplash: silentjpeg size 109002 bytes
[ 0.777989] bootsplash: ...found (1280x1024, 40442 bytes, v3).
[ 0.778101] bootsplash: silentjpeg size 126037 bytes
[ 0.882677] Console: switching to colour frame buffer device 156x60
[ 0.962069] fb0: VESA VGA frame buffer device
[ 0.962474] intel_idle: MWAIT substates: 0x21120
[ 0.962475] intel_idle: v0.4 model 0x2A
[ 0.962476] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.962518] ERST: Table is not found!
[ 0.962842] GHES: HEST is not enabled!
[ 0.963242] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.084566] Non-volatile memory driver v1.3
[ 1.084937] Linux agpgart interface v0.103
[ 1.085368] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.086005] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
total, 262144K mappable
[ 1.087854] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.088547] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.089240] ahci 0000:00:1f.2: version 3.0
[ 1.089249] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1f.2[B] _PRT entry
[ 1.089987] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.090633] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.090657] ahci: SSS flag set, parallel bus scan disabled
[ 1.101254] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x13 impl SATA mode
[ 1.102014] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
pio slum part ems sxs apst
[ 1.102794] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.106635] scsi0 : ahci
[ 1.106935] scsi1 : ahci
[ 1.107220] scsi2 : ahci
[ 1.107497] scsi3 : ahci
[ 1.107773] scsi4 : ahci
[ 1.108048] scsi5 : ahci
[ 1.108376] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08100 irq 43
[ 1.109028] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08180 irq 43
[ 1.109687] ata3: DUMMY
[ 1.109906] ata4: DUMMY
[ 1.110126] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port
0xf1c08300 irq 43
[ 1.110785] ata6: DUMMY
[ 1.111067] Fixed MDIO Bus: probed
[ 1.111378] arcnet loaded.
[ 1.111620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.112214] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1a.0[A] _PRT entry
[ 1.112956] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.113604] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.113607] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.114089] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.114781] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.141311] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.141329] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000
[ 1.173136] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.195461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.217783] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.240042] usb usb1: Product: EHCI Host Controller
[ 1.262192] usb usb1: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd
[ 1.284442] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.306584] hub 1-0:1.0: USB hub found
[ 1.328442] hub 1-0:1.0: 2 ports detected
[ 1.350123] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1d.0[A] _PRT entry
[ 1.372171] IOAPIC[0]: Set routing entry (2-23 -> 0x79 -> IRQ 23
Mode:1 Active:1 Dest:1)
[ 1.372176] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:79 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 1.372180] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.394153] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.394156] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.414770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.437965] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.460503] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[ 1.460548] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.464440] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.464459] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000
[ 1.473673] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.473717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.473718] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.473720] usb usb2: Product: EHCI Host Controller
[ 1.473721] usb usb2: Manufacturer: Linux 3.2.0-rc6-3-desktop ehci_hcd
[ 1.473722] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.473841] hub 2-0:1.0: USB hub found
[ 1.473845] hub 2-0:1.0: 2 ports detected
[ 1.473918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.473931] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.753069] Initializing USB Mass Storage driver...
[ 1.753071] Refined TSC clocksource calibration: 2793.653 MHz.
[ 1.755293] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 256GB,
AXM08D1Q, max UDMA/133
[ 1.755295] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.755611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[ 1.757928] ata1.00: configured for UDMA/133
[ 1.854112] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.912671] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81
AXM0 PQ: 0 ANSI: 5
[ 1.912674] usbcore: registered new interface driver usb-storage
[ 1.912675] USB Mass Storage support registered.
[ 1.912682] usbcore: registered new interface driver ums-alauda
[ 1.912688] usbcore: registered new interface driver ums-cypress
[ 1.912694] usbcore: registered new interface driver ums-datafab
[ 1.912701] usbcore: registered new interface driver ums-freecom
[ 1.912707] usbcore: registered new interface driver ums-isd200
[ 1.912713] usbcore: registered new interface driver ums-jumpshot
[ 1.912718] usbcore: registered new interface driver ums-karma
[ 1.912724] usbcore: registered new interface driver ums-onetouch
[ 1.912730] usbcore: registered new interface driver ums-sddr09
[ 1.912736] usbcore: registered new interface driver ums-sddr55
[ 1.912741] usbcore: registered new interface driver ums-usbat
[ 1.912768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 1.912807] i8042: [0] 20 -> i8042 (command)
[ 1.913286] i8042: [0] 67 <- i8042 (return)
[ 1.913347] i8042: [1] 20 -> i8042 (command)
[ 1.913721] i8042: [1] 67 <- i8042 (return)
[ 1.913726] i8042: [1] 60 -> i8042 (command)
[ 1.913889] i8042: [1] 76 -> i8042 (parameter)
[ 1.914109] i8042: [1] d3 -> i8042 (command)
[ 1.914325] i8042: [1] 5a -> i8042 (parameter)
[ 1.914544] i8042: [1] 5a <- i8042 (return)
[ 1.914553] i8042: [2] a7 -> i8042 (command)
[ 1.914661] i8042: [2] 20 -> i8042 (command)
[ 1.914931] i8042: [2] 76 <- i8042 (return)
[ 1.914935] i8042: [2] a8 -> i8042 (command)
[ 1.915095] i8042: [2] 20 -> i8042 (command)
[ 1.915364] i8042: [2] 56 <- i8042 (return)
[ 1.915373] i8042: [3] 60 -> i8042 (command)
[ 1.915536] i8042: [3] 74 -> i8042 (parameter)
[ 1.915763] i8042: [3] d3 -> i8042 (command)
[ 1.915978] i8042: [3] f0 -> i8042 (parameter)
[ 1.916198] i8042: [3] f0 <- i8042 (return)
[ 1.916222] i8042: [4] d3 -> i8042 (command)
[ 1.916282] i8042: [4] 56 -> i8042 (parameter)
[ 1.916555] i8042: [4] 56 <- i8042 (return)
[ 1.916567] i8042: [4] d3 -> i8042 (command)
[ 1.916783] i8042: [4] a4 -> i8042 (parameter)
[ 1.917002] i8042: [4] a4 <- i8042 (return)
[ 1.917027] i8042: [5] 60 -> i8042 (command)
[ 1.917137] i8042: [5] 56 -> i8042 (parameter)
[ 1.917309] i8042: [5] 60 -> i8042 (command)
[ 1.917525] i8042: [5] 47 -> i8042 (parameter)
[ 1.917528] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.917552] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.917632] mousedev: PS/2 mouse device common for all mice
[ 1.917760] i8042: [5] f2 -> i8042 (kbd-data)
[ 1.917804] rtc_cmos 00:05: RTC can wake from S4
[ 1.917906] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.917932] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.918037] cpuidle: using governor ladder
[ 2.402856] i8042: [491] ed -> i8042 (kbd-data)
[ 2.402866] i8042: [491] fa <- i8042 (interrupt, 0, 12)
[ 2.402926] hpet1: lost 30 rtc interrupts
[ 2.403065] cpuidle: using governor menu
[ 2.403067] EFI Variables Facility v0.08 2004-May-17
[ 2.403295] usbcore: registered new interface driver usbhid
[ 2.403297] usbhid: USB HID core driver
[ 2.404035] i8042: [492] 00 -> i8042 (kbd-data)
[ 2.510920] i8042: [599] fa <- i8042 (interrupt, 0, 1)
[ 2.510940] i8042: [599] ed -> i8042 (kbd-data)
[ 2.511103] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 2.511126] TCP cubic registered
[ 2.511128] IPv6: Loaded, but administratively disabled, reboot
required to enable
[ 2.511144] lib80211: common routines for IEEE802.11 drivers
[ 2.511145] lib80211_crypt: registered algorithm 'NULL'
[ 2.511147] Registering the dns_resolver key type
[ 2.511162] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 2.511169]
[ 2.511169] printing PIC contents
[ 2.511173] ... PIC IMR: ffff
[ 2.511177] ... PIC IRR: 0c01
[ 2.511184] ... PIC ISR: 0000
[ 2.511187] ... PIC ELCR: 0e00
[ 2.643783] printing local APIC contents on CPU#0/0:
[ 2.643784] ... APIC ID: 00000000 (0)
[ 2.666176] ... APIC VERSION: 01060015
[ 2.688175] ... APIC TASKPRI: 00000000 (00)
[ 2.688176] ... APIC PROCPRI: 00000000
[ 2.688177] ... APIC LDR: 00000001
[ 2.688178] ... APIC SPIV: 000001ff
[ 2.688179] ... APIC ISR field:
[ 2.688180]
0000000000000000000000000000000000000000000000000000000000000000
[ 2.709866] i8042: [799] f4 -> i8042 (kbd-data)
[ 2.710552] ... APIC TMR field:
[ 2.710553]
0000000000000000000000000000000000000000000000000000000000000000
[ 2.732661] ... APIC IRR field:
[ 2.732662]
0000000002020000000200000000000000000000000000000000000000008000
[ 2.754421] ... APIC ESR: 00000000
[ 2.754422] ... APIC ICR: 000008fd
[ 2.754422] ... APIC ICR2: 00000040
[ 2.754423] ... APIC LVTT: 000000ef
[ 2.754424] ... APIC LVTPC: 00000400
[ 2.754425] ... APIC LVT0: 00010700
[ 2.754426] ... APIC LVT1: 00000400
[ 2.754427] ... APIC LVTERR: 000000fe
[ 2.754428] ... APIC TMICT: 000004c0
[ 2.754428] ... APIC TMCCT: 00000000
[ 2.754429] ... APIC TDCR: 00000003
[ 2.754430]
[ 2.775580] number of MP IRQ sources: 15.
[ 2.775582] number of IO-APIC #2 registers: 24.
[ 2.775583] testing the IO APIC.......................
[ 2.775623] i8042: [864] fa <- i8042 (interrupt, 0, 1)
[ 2.775695] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 2.775800] sd 0:0:0:0: [sda] Write Protect is off
[ 2.775802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.775812] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.786128] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.786130] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.815686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.820070] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133
[ 2.825187] ata2.00: configured for UDMA/133
[ 2.830643] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N
A101 PQ: 0 ANSI: 5
[ 2.995778]
[ 2.995813] i8042: [1085] d4 -> i8042 (command)
[ 2.995924] i8042: [1085] f2 -> i8042 (parameter)
[ 2.995926] hub 1-1:1.0: USB hub found
[ 2.996023] hub 1-1:1.0: 6 ports detected
[ 2.997464] sda: sda1 sda2
[ 2.999069] i8042: [1087] fa <- i8042 (interrupt, 1, 12)
[ 2.999923] i8042: [1088] 00 <- i8042 (interrupt, 1, 12)
[ 2.999939] i8042: [1089] 60 -> i8042 (command)
[ 3.000102] i8042: [1089] 45 -> i8042 (parameter)
[ 3.000317] i8042: [1089] 60 -> i8042 (command)
[ 3.000531] i8042: [1089] 47 -> i8042 (parameter)
[ 3.000767] i8042: [1089] d4 -> i8042 (command)
[ 3.000930] i8042: [1089] f2 -> i8042 (parameter)
[ 3.004925] i8042: [1089] fa <- i8042 (interrupt, 1, 12)
[ 3.005855] i8042: [1094] 00 <- i8042 (interrupt, 1, 12)
[ 3.005871] i8042: [1095] d4 -> i8042 (command)
[ 3.006034] i8042: [1095] f6 -> i8042 (parameter)
[ 3.009373] i8042: [1095] fa <- i8042 (interrupt, 1, 12)
[ 3.009391] i8042: [1099] d4 -> i8042 (command)
[ 3.009609] i8042: [1099] f3 -> i8042 (parameter)
[ 3.012027] i8042: [1099] fa <- i8042 (interrupt, 1, 12)
[ 3.012042] i8042: [1101] d4 -> i8042 (command)
[ 3.012206] i8042: [1101] 0a -> i8042 (parameter)
[ 3.015493] i8042: [1101] fa <- i8042 (interrupt, 1, 12)
[ 3.015508] i8042: [1105] d4 -> i8042 (command)
[ 3.015725] i8042: [1105] e8 -> i8042 (parameter)
[ 3.018010] i8042: [1105] fa <- i8042 (interrupt, 1, 12)
[ 3.018029] i8042: [1107] d4 -> i8042 (command)
[ 3.018192] i8042: [1107] 00 -> i8042 (parameter)
[ 3.020628] i8042: [1107] fa <- i8042 (interrupt, 1, 12)
[ 3.020643] i8042: [1110] d4 -> i8042 (command)
[ 3.020807] i8042: [1110] f3 -> i8042 (parameter)
[ 3.023287] i8042: [1110] fa <- i8042 (interrupt, 1, 12)
[ 3.023302] i8042: [1112] d4 -> i8042 (command)
[ 3.023465] i8042: [1112] 14 -> i8042 (parameter)
[ 3.026067] i8042: [1113] fa <- i8042 (interrupt, 1, 12)
[ 3.026083] i8042: [1115] d4 -> i8042 (command)
[ 3.026247] i8042: [1115] f3 -> i8042 (parameter)
[ 3.029425] i8042: [1115] fa <- i8042 (interrupt, 1, 12)
[ 3.029440] i8042: [1119] d4 -> i8042 (command)
[ 3.029708] i8042: [1119] 3c -> i8042 (parameter)
[ 3.031965] i8042: [1119] fa <- i8042 (interrupt, 1, 12)
[ 3.031981] i8042: [1121] d4 -> i8042 (command)
[ 3.032144] i8042: [1121] f3 -> i8042 (parameter)
[ 3.034971] i8042: [1121] fa <- i8042 (interrupt, 1, 12)
[ 3.034987] i8042: [1124] d4 -> i8042 (command)
[ 3.035149] i8042: [1124] 28 -> i8042 (parameter)
[ 3.037422] i8042: [1124] fa <- i8042 (interrupt, 1, 12)
[ 3.037436] i8042: [1127] d4 -> i8042 (command)
[ 3.037600] i8042: [1127] f3 -> i8042 (parameter)
[ 3.040473] i8042: [1127] fa <- i8042 (interrupt, 1, 12)
[ 3.040490] i8042: [1130] d4 -> i8042 (command)
[ 3.040757] i8042: [1130] 14 -> i8042 (parameter)
[ 3.043019] i8042: [1130] fa <- i8042 (interrupt, 1, 12)
[ 3.043034] i8042: [1132] d4 -> i8042 (command)
[ 3.043198] i8042: [1132] f3 -> i8042 (parameter)
[ 3.046227] i8042: [1132] fa <- i8042 (interrupt, 1, 12)
[ 3.046243] i8042: [1135] d4 -> i8042 (command)
[ 3.046408] i8042: [1135] 14 -> i8042 (parameter)
[ 3.048701] i8042: [1135] fa <- i8042 (interrupt, 1, 12)
[ 3.048718] i8042: [1138] d4 -> i8042 (command)
[ 3.048882] i8042: [1138] f3 -> i8042 (parameter)
[ 3.051911] i8042: [1138] fa <- i8042 (interrupt, 1, 12)
[ 3.051926] i8042: [1141] d4 -> i8042 (command)
[ 3.052194] i8042: [1141] 3c -> i8042 (parameter)
[ 3.054453] i8042: [1141] fa <- i8042 (interrupt, 1, 12)
[ 3.054467] i8042: [1144] d4 -> i8042 (command)
[ 3.054630] i8042: [1144] f3 -> i8042 (parameter)
[ 3.060839] i8042: [1144] fa <- i8042 (interrupt, 1, 12)
[ 3.060853] i8042: [1150] d4 -> i8042 (command)
[ 3.061069] i8042: [1150] 28 -> i8042 (parameter)
[ 3.063300] i8042: [1150] fa <- i8042 (interrupt, 1, 12)
[ 3.063316] i8042: [1153] d4 -> i8042 (command)
[ 3.063479] i8042: [1153] f3 -> i8042 (parameter)
[ 3.066150] i8042: [1153] fa <- i8042 (interrupt, 1, 12)
[ 3.066166] i8042: [1155] d4 -> i8042 (command)
[ 3.066329] i8042: [1155] 14 -> i8042 (parameter)
[ 3.068591] i8042: [1156] fa <- i8042 (interrupt, 1, 12)
[ 3.068608] i8042: [1158] d4 -> i8042 (command)
[ 3.068772] i8042: [1158] f3 -> i8042 (parameter)
[ 3.071764] i8042: [1158] fa <- i8042 (interrupt, 1, 12)
[ 3.071780] i8042: [1161] d4 -> i8042 (command)
[ 3.071943] i8042: [1161] 14 -> i8042 (parameter)
[ 3.074268] i8042: [1161] fa <- i8042 (interrupt, 1, 12)
[ 3.074285] i8042: [1164] d4 -> i8042 (command)
[ 3.074448] i8042: [1164] f2 -> i8042 (parameter)
[ 3.077037] i8042: [1164] fa <- i8042 (interrupt, 1, 12)
[ 3.077906] i8042: [1166] 00 <- i8042 (interrupt, 1, 12)
[ 3.077922] i8042: [1167] d4 -> i8042 (command)
[ 3.078085] i8042: [1167] e8 -> i8042 (parameter)
[ 3.080814] i8042: [1167] fa <- i8042 (interrupt, 1, 12)
[ 3.080830] i8042: [1170] d4 -> i8042 (command)
[ 3.081046] i8042: [1170] 00 -> i8042 (parameter)
[ 3.083272] i8042: [1170] fa <- i8042 (interrupt, 1, 12)
[ 3.083288] i8042: [1173] d4 -> i8042 (command)
[ 3.083555] i8042: [1173] e8 -> i8042 (parameter)
[ 3.085294] IO APIC #2......
[ 3.085295] .... register #00: 02000000
[ 3.085296] ....... : physical APIC id: 02
[ 3.085297] ....... : Delivery Type: 0
[ 3.085298] ....... : LTS : 0
[ 3.085299] .... register #01: 00170020
[ 3.085300] ....... : max redirection entries: 17
[ 3.085301] ....... : PRQ implemented: 0
[ 3.085302] ....... : IO APIC version: 20
[ 3.085302] .... IRQ redirection table:
[ 3.085303] NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:
[ 3.085308] 00 0000 0 1 0 0 0 0 0 0 00
[ 3.085313] 01 0011 1 0 0 0 0 0 0 0 01
[ 3.085318] 02 0001 1 0 0 0 0 0 0 0 02
[ 3.085323] 03 0002 1 0 0 0 0 0 0 0 03
[ 3.085328] 04 0003 1 0 0 0 0 0 0 0 04
[ 3.085333] 05 0004 1 0 0 0 0 0 0 0 05
[ 3.085342] 06 0005 1 0 0 0 0 0 0 0 06
[ 3.085347] 07 0006 1 0 0 0 0 0 0 0 07
[ 3.085352] 08 0010 1 0 0 0 0 0 0 0 08
[ 3.085356] 09 0008 1 0 1 0 0 0 0 0 09
[ 3.085363] 0a 0009 1 0 0 0 0 0 0 0 0A
[ 3.085368] 0b 000A 1 0 0 0 0 0 0 0 0B
[ 3.085373] 0c 0012 1 0 0 0 0 0 0 0 0C
[ 3.085378] 0d 000F 1 0 0 0 0 0 0 0 0D
[ 3.085383] 0e 000D 1 0 0 0 0 0 0 0 0E
[ 3.085388] 0f 000E 1 0 0 0 0 0 0 0 0F
[ 3.085393] 10 0014 1 0 1 0 1 0 0 0 10
[ 3.085398] 11 0015 1 1 1 0 1 0 0 0 11
[ 3.085402] 12 0000 0 1 0 0 0 0 0 0 00
[ 3.085407] 13 0016 1 1 1 0 1 0 0 0 13
[ 3.085412] 14 0013 1 0 0 0 0 0 0 0 14
[ 3.085417] 15 0000 0 1 0 0 0 0 0 0 00
[ 3.085421] 16 0000 0 1 0 0 0 0 0 0 00
[ 3.085426] 17 0019 1 0 1 0 1 0 0 0 17
[ 3.085428] IRQ to pin mappings:
[ 3.085429] IRQ0 -> 0:2
[ 3.085431] IRQ1 -> 0:1
[ 3.085432] IRQ3 -> 0:3
[ 3.085433] IRQ4 -> 0:4
[ 3.085435] IRQ5 -> 0:5
[ 3.085436] IRQ6 -> 0:6
[ 3.085437] IRQ7 -> 0:7
[ 3.085438] IRQ8 -> 0:8
[ 3.085440] IRQ9 -> 0:9
[ 3.085441] IRQ10 -> 0:10
[ 3.085443] IRQ11 -> 0:11
[ 3.085444] IRQ12 -> 0:12
[ 3.085445] IRQ13 -> 0:13
[ 3.085446] IRQ14 -> 0:14
[ 3.085448] IRQ15 -> 0:15
[ 3.085449] IRQ16 -> 0:16
[ 3.085450] IRQ17 -> 0:17
[ 3.085451] IRQ19 -> 0:19
[ 3.085453] IRQ20 -> 0:20
[ 3.085454] IRQ23 -> 0:23
[ 3.085455] .................................... done.
[ 3.085478] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.086479] i8042: [1175] fa <- i8042 (interrupt, 1, 12)
[ 3.086492] i8042: [1176] d4 -> i8042 (command)
[ 3.086656] i8042: [1176] 00 -> i8042 (parameter)
[ 3.089087] i8042: [1176] fa <- i8042 (interrupt, 1, 12)
[ 3.089102] i8042: [1178] d4 -> i8042 (command)
[ 3.089370] i8042: [1178] e8 -> i8042 (parameter)
[ 3.091996] i8042: [1178] fa <- i8042 (interrupt, 1, 12)
[ 3.092012] i8042: [1181] d4 -> i8042 (command)
[ 3.092227] i8042: [1181] 00 -> i8042 (parameter)
[ 3.094467] i8042: [1181] fa <- i8042 (interrupt, 1, 12)
[ 3.094483] i8042: [1184] d4 -> i8042 (command)
[ 3.094648] i8042: [1184] e8 -> i8042 (parameter)
[ 3.097145] i8042: [1184] fa <- i8042 (interrupt, 1, 12)
[ 3.097161] i8042: [1186] d4 -> i8042 (command)
[ 3.097427] i8042: [1186] 00 -> i8042 (parameter)
[ 3.099660] i8042: [1187] fa <- i8042 (interrupt, 1, 12)
[ 3.099675] i8042: [1189] d4 -> i8042 (command)
[ 3.099838] i8042: [1189] e9 -> i8042 (parameter)
[ 3.100250] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.102322] i8042: [1189] fa <- i8042 (interrupt, 1, 12)
[ 3.103328] i8042: [1192] 33 <- i8042 (interrupt, 1, 12)
[ 3.104331] i8042: [1193] cc <- i8042 (interrupt, 1, 12)
[ 3.105784] i8042: [1193] a3 <- i8042 (interrupt, 1, 12)
[ 3.105799] i8042: [1195] d4 -> i8042 (command)
[ 3.106067] i8042: [1195] f6 -> i8042 (parameter)
[ 3.108584] i8042: [1195] fa <- i8042 (interrupt, 1, 12)
[ 3.108600] i8042: [1198] d4 -> i8042 (command)
[ 3.108762] i8042: [1198] e8 -> i8042 (parameter)
[ 3.111662] i8042: [1198] fa <- i8042 (interrupt, 1, 12)
[ 3.111677] i8042: [1201] d4 -> i8042 (command)
[ 3.111945] i8042: [1201] 00 -> i8042 (parameter)
[ 3.114237] i8042: [1201] fa <- i8042 (interrupt, 1, 12)
[ 3.114254] i8042: [1204] d4 -> i8042 (command)
[ 3.114522] i8042: [1204] e6 -> i8042 (parameter)
[ 3.117199] i8042: [1204] fa <- i8042 (interrupt, 1, 12)
[ 3.117214] i8042: [1207] d4 -> i8042 (command)
[ 3.117378] i8042: [1207] e6 -> i8042 (parameter)
[ 3.119700] i8042: [1207] fa <- i8042 (interrupt, 1, 12)
[ 3.119715] i8042: [1209] d4 -> i8042 (command)
[ 3.119880] i8042: [1209] e6 -> i8042 (parameter)
[ 3.123090] i8042: [1209] fa <- i8042 (interrupt, 1, 12)
[ 3.123105] i8042: [1212] d4 -> i8042 (command)
[ 3.123320] i8042: [1212] e9 -> i8042 (parameter)
[ 3.125623] i8042: [1212] fa <- i8042 (interrupt, 1, 12)
[ 3.126956] i8042: [1215] 05 <- i8042 (interrupt, 1, 12)
[ 3.127832] i8042: [1216] 00 <- i8042 (interrupt, 1, 12)
[ 3.128715] i8042: [1216] 64 <- i8042 (interrupt, 1, 12)
[ 3.128731] i8042: [1218] d4 -> i8042 (command)
[ 3.128894] i8042: [1218] f6 -> i8042 (parameter)
[ 3.132087] i8042: [1218] fa <- i8042 (interrupt, 1, 12)
[ 3.132101] i8042: [1221] d4 -> i8042 (command)
[ 3.132265] i8042: [1221] f5 -> i8042 (parameter)
[ 3.134770] i8042: [1222] fa <- i8042 (interrupt, 1, 12)
[ 3.134786] i8042: [1224] d4 -> i8042 (command)
[ 3.134949] i8042: [1224] e6 -> i8042 (parameter)
[ 3.137759] i8042: [1224] fa <- i8042 (interrupt, 1, 12)
[ 3.137773] i8042: [1227] d4 -> i8042 (command)
[ 3.137935] i8042: [1227] e6 -> i8042 (parameter)
[ 3.140370] i8042: [1227] fa <- i8042 (interrupt, 1, 12)
[ 3.140385] i8042: [1230] d4 -> i8042 (command)
[ 3.140654] i8042: [1230] e6 -> i8042 (parameter)
[ 3.143061] i8042: [1230] fa <- i8042 (interrupt, 1, 12)
[ 3.143076] i8042: [1232] d4 -> i8042 (command)
[ 3.143291] i8042: [1232] e9 -> i8042 (parameter)
[ 3.145630] i8042: [1232] fa <- i8042 (interrupt, 1, 12)
[ 3.147022] i8042: [1235] 05 <- i8042 (interrupt, 1, 12)
[ 3.147898] i8042: [1236] 02 <- i8042 (interrupt, 1, 12)
[ 3.148782] i8042: [1236] 64 <- i8042 (interrupt, 1, 12)
[ 3.148796] i8042: [1238] d4 -> i8042 (command)
[ 3.148959] i8042: [1238] e8 -> i8042 (parameter)
[ 3.151988] PM: Checking hibernation image partition /dev/system/swap
[ 3.152061] i8042: [1241] fa <- i8042 (interrupt, 1, 12)
[ 3.152134] i8042: [1241] d4 -> i8042 (command)
[ 3.152298] i8042: [1242] 03 -> i8042 (parameter)
[ 3.154621] i8042: [1244] fa <- i8042 (interrupt, 1, 12)
[ 3.154707] i8042: [1244] d4 -> i8042 (command)
[ 3.154818] i8042: [1244] e6 -> i8042 (parameter)
[ 3.157874] i8042: [1247] fa <- i8042 (interrupt, 1, 12)
[ 3.157971] i8042: [1247] d4 -> i8042 (command)
[ 3.158134] i8042: [1247] e6 -> i8042 (parameter)
[ 3.160475] i8042: [1250] fa <- i8042 (interrupt, 1, 12)
[ 3.160558] i8042: [1250] d4 -> i8042 (command)
[ 3.160669] i8042: [1250] e6 -> i8042 (parameter)
[ 3.163664] i8042: [1253] fa <- i8042 (interrupt, 1, 12)
[ 3.163788] i8042: [1253] d4 -> i8042 (command)
[ 3.163900] i8042: [1253] e9 -> i8042 (parameter)
[ 3.167138] i8042: [1256] fa <- i8042 (interrupt, 1, 12)
[ 3.168005] i8042: [1257] 05 <- i8042 (interrupt, 1, 12)
[ 3.168892] i8042: [1258] 03 <- i8042 (interrupt, 1, 12)
[ 3.169776] i8042: [1259] 64 <- i8042 (interrupt, 1, 12)
[ 3.169856] i8042: [1259] d4 -> i8042 (command)
[ 3.169966] i8042: [1259] e8 -> i8042 (parameter)
[ 3.173330] i8042: [1263] fa <- i8042 (interrupt, 1, 12)
[ 3.173421] i8042: [1263] d4 -> i8042 (command)
[ 3.173639] i8042: [1263] 00 -> i8042 (parameter)
[ 3.175962] i8042: [1265] fa <- i8042 (interrupt, 1, 12)
[ 3.176044] i8042: [1265] d4 -> i8042 (command)
[ 3.176209] i8042: [1265] e6 -> i8042 (parameter)
[ 3.178726] i8042: [1268] fa <- i8042 (interrupt, 1, 12)
[ 3.178820] i8042: [1268] d4 -> i8042 (command)
[ 3.178931] i8042: [1268] e6 -> i8042 (parameter)
[ 3.181375] i8042: [1271] fa <- i8042 (interrupt, 1, 12)
[ 3.181499] i8042: [1271] d4 -> i8042 (command)
[ 3.182240] i8042: [1271] e6 -> i8042 (parameter)
[ 3.184747] i8042: [1274] fa <- i8042 (interrupt, 1, 12)
[ 3.184842] i8042: [1274] d4 -> i8042 (command)
[ 3.184954] i8042: [1274] e9 -> i8042 (parameter)
[ 3.187999] i8042: [1277] fa <- i8042 (interrupt, 1, 12)
[ 3.188866] i8042: [1278] 05 <- i8042 (interrupt, 1, 12)
[ 3.189767] i8042: [1279] 00 <- i8042 (interrupt, 1, 12)
[ 3.190756] i8042: [1280] 64 <- i8042 (interrupt, 1, 12)
[ 3.190841] i8042: [1280] d4 -> i8042 (command)
[ 3.190953] i8042: [1280] e1 -> i8042 (parameter)
[ 3.215928] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.237807] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.259900] hub 2-1:1.0: USB hub found
[ 3.281547] hub 2-1:1.0: 8 ports detected
[ 3.299961] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.389927] i8042: [1480] d4 -> i8042 (command)
[ 3.390091] i8042: [1480] 0a -> i8042 (parameter)
[ 3.398162] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[ 3.561936] usb 1-1.4: New USB device found, idVendor=0c45,
idProduct=642a
[ 3.583110] usb 1-1.4: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 3.589561] i8042: [1680] d4 -> i8042 (command)
[ 3.589671] i8042: [1680] f5 -> i8042 (parameter)
[ 3.604568] i8042: [1695] fa <- i8042 (interrupt, 1, 12)
[ 3.604573] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM
[ 3.604613] i8042: [1695] d4 -> i8042 (command)
[ 3.604725] i8042: [1695] f3 -> i8042 (parameter)
[ 3.626275] i8042: [1716] fa <- i8042 (interrupt, 1, 12)
[ 3.626278] usb 1-1.4: Manufacturer: CN0XRCWG724871ANS3CZA00
[ 3.626320] i8042: [1716] d4 -> i8042 (command)
[ 3.626484] i8042: [1716] 66 -> i8042 (parameter)
[ 3.648215] i8042: [1738] fe <- i8042 (interrupt, 1, 12)
[ 3.648259] i8042: [1738] d4 -> i8042 (command)
[ 3.648424] i8042: [1738] 88 -> i8042 (parameter)
[ 3.678465] i8042: [1769] d4 -> i8042 (command)
[ 3.678643] i8042: [1769] f3 -> i8042 (parameter)
[ 3.681134] i8042: [1771] fc <- i8042 (interrupt, 1, 12)
[ 3.681225] i8042: [1771] d4 -> i8042 (command)
[ 3.681336] i8042: [1771] f4 -> i8042 (parameter)
[ 3.684450] i8042: [1775] fa <- i8042 (interrupt, 1, 12)
[ 3.684574] i8042: [1775] d4 -> i8042 (command)
[ 3.684791] i8042: [1775] f6 -> i8042 (parameter)
[ 3.688413] i8042: [1779] fa <- i8042 (interrupt, 1, 12)
[ 3.688507] i8042: [1779] d4 -> i8042 (command)
[ 3.689512] i8042: [1779] ff -> i8042 (parameter)
[ 3.692089] i8042: [1782] fa <- i8042 (interrupt, 1, 12)
[ 3.726675] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[ 3.838521] usb 2-1.5: New USB device found, idVendor=8086,
idProduct=0189
[ 3.861231] usb 2-1.5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.892268] i8042: [1983] aa <- i8042 (interrupt, 1, 12)
[ 3.893135] i8042: [1984] 00 <- i8042 (interrupt, 1, 12)
[ 3.893215] i8042: [1984] d4 -> i8042 (command)
[ 3.893483] i8042: [1984] f3 -> i8042 (parameter)
[ 3.896588] i8042: [1987] fa <- i8042 (interrupt, 1, 12)
[ 3.896676] i8042: [1987] d4 -> i8042 (command)
[ 3.896787] i8042: [1987] c8 -> i8042 (parameter)
[ 3.899159] i8042: [1990] fa <- i8042 (interrupt, 1, 12)
[ 3.899238] i8042: [1990] d4 -> i8042 (command)
[ 3.899454] i8042: [1990] f3 -> i8042 (parameter)
[ 3.902540] i8042: [1993] fa <- i8042 (interrupt, 1, 12)
[ 3.902664] i8042: [1993] d4 -> i8042 (command)
[ 3.902775] i8042: [1993] 64 -> i8042 (parameter)
[ 3.905189] i8042: [1996] fa <- i8042 (interrupt, 1, 12)
[ 3.905283] i8042: [1996] d4 -> i8042 (command)
[ 3.905973] i8042: [1996] f3 -> i8042 (parameter)
[ 3.908560] i8042: [1999] fa <- i8042 (interrupt, 1, 12)
[ 3.908653] i8042: [1999] d4 -> i8042 (command)
[ 3.908765] i8042: [1999] 50 -> i8042 (parameter)
[ 3.911650] i8042: [2002] fa <- i8042 (interrupt, 1, 12)
[ 3.911743] i8042: [2002] d4 -> i8042 (command)
[ 3.911855] i8042: [2002] f2 -> i8042 (parameter)
[ 3.914438] i8042: [2005] fa <- i8042 (interrupt, 1, 12)
[ 3.915312] i8042: [2006] 03 <- i8042 (interrupt, 1, 12)
[ 3.915406] i8042: [2006] d4 -> i8042 (command)
[ 3.916096] i8042: [2006] f3 -> i8042 (parameter)
[ 3.918631] i8042: [2009] fa <- i8042 (interrupt, 1, 12)
[ 3.918752] i8042: [2009] d4 -> i8042 (command)
[ 3.918864] i8042: [2009] c8 -> i8042 (parameter)
[ 3.921832] i8042: [2012] fa <- i8042 (interrupt, 1, 12)
[ 3.921958] i8042: [2012] d4 -> i8042 (command)
[ 3.922122] i8042: [2012] f3 -> i8042 (parameter)
[ 3.924645] i8042: [2015] fa <- i8042 (interrupt, 1, 12)
[ 3.924738] i8042: [2015] d4 -> i8042 (command)
[ 3.924850] i8042: [2015] c8 -> i8042 (parameter)
[ 3.927376] i8042: [2018] fa <- i8042 (interrupt, 1, 12)
[ 3.927502] i8042: [2018] d4 -> i8042 (command)
[ 3.927667] i8042: [2018] f3 -> i8042 (parameter)
[ 3.930190] i8042: [2021] fa <- i8042 (interrupt, 1, 12)
[ 3.930313] i8042: [2021] d4 -> i8042 (command)
[ 3.931428] i8042: [2021] 50 -> i8042 (parameter)
[ 3.933733] i8042: [2024] fa <- i8042 (interrupt, 1, 12)
[ 3.933824] i8042: [2024] d4 -> i8042 (command)
[ 3.933936] i8042: [2024] f2 -> i8042 (parameter)
[ 3.936990] i8042: [2027] fa <- i8042 (interrupt, 1, 12)
[ 3.937836] i8042: [2028] 03 <- i8042 (interrupt, 1, 12)
[ 3.937931] i8042: [2028] d4 -> i8042 (command)
[ 3.938042] i8042: [2028] f3 -> i8042 (parameter)
[ 3.941461] i8042: [2032] fa <- i8042 (interrupt, 1, 12)
[ 3.941554] i8042: [2032] d4 -> i8042 (command)
[ 3.941770] i8042: [2032] c8 -> i8042 (parameter)
[ 3.944095] i8042: [2035] fa <- i8042 (interrupt, 1, 12)
[ 3.944219] i8042: [2035] d4 -> i8042 (command)
[ 3.944330] i8042: [2035] f3 -> i8042 (parameter)
[ 3.947216] i8042: [2038] fa <- i8042 (interrupt, 1, 12)
[ 3.947324] i8042: [2038] d4 -> i8042 (command)
[ 3.947488] i8042: [2038] 64 -> i8042 (parameter)
[ 3.949809] i8042: [2040] fa <- i8042 (interrupt, 1, 12)
[ 3.949903] i8042: [2040] d4 -> i8042 (command)
[ 3.950015] i8042: [2040] f3 -> i8042 (parameter)
[ 3.952817] i8042: [2043] fa <- i8042 (interrupt, 1, 12)
[ 3.952941] i8042: [2043] d4 -> i8042 (command)
[ 3.953053] i8042: [2043] 50 -> i8042 (parameter)
[ 3.955464] i8042: [2046] fa <- i8042 (interrupt, 1, 12)
[ 3.955589] i8042: [2046] d4 -> i8042 (command)
[ 3.955753] i8042: [2046] f2 -> i8042 (parameter)
[ 3.958834] i8042: [2049] fa <- i8042 (interrupt, 1, 12)
[ 3.959841] i8042: [2050] 03 <- i8042 (interrupt, 1, 12)
[ 3.959980] i8042: [2051] d4 -> i8042 (command)
[ 3.960092] i8042: [2051] f3 -> i8042 (parameter)
[ 3.963087] i8042: [2054] fa <- i8042 (interrupt, 1, 12)
[ 3.963213] i8042: [2054] d4 -> i8042 (command)
[ 3.963378] i8042: [2054] 64 -> i8042 (parameter)
[ 3.965850] i8042: [2056] fa <- i8042 (interrupt, 1, 12)
[ 3.965945] i8042: [2056] d4 -> i8042 (command)
[ 3.966056] i8042: [2056] e8 -> i8042 (parameter)
[ 3.968700] i8042: [2059] fa <- i8042 (interrupt, 1, 12)
[ 3.968794] i8042: [2059] d4 -> i8042 (command)
[ 3.968959] i8042: [2059] 03 -> i8042 (parameter)
[ 3.971304] i8042: [2062] fa <- i8042 (interrupt, 1, 12)
[ 3.971398] i8042: [2062] d4 -> i8042 (command)
[ 3.974350] i8042: [2062] e6 -> i8042 (parameter)
[ 3.976879] i8042: [2067] fa <- i8042 (interrupt, 1, 12)
[ 3.977018] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input1
[ 4.000810] i8042: [2091] d4 -> i8042 (command)
[ 4.000921] i8042: [2091] f4 -> i8042 (parameter)
[ 4.003458] i8042: [2094] fa <- i8042 (interrupt, 1, 12)
[ 4.003598] PM: Hibernation image not present or could not be loaded.
[ 4.003620] registered taskstats version 1
[ 4.035412] Magic number: 7:990:357
[ 4.059596] rtc_cmos 00:05: setting system clock to 2011-12-27
01:23:24 UTC (1324949004)
[ 4.085662] Freeing unused kernel memory: 944k freed
[ 4.110469] Write protecting the kernel read-only data: 12288k
[ 4.135741] Freeing unused kernel memory: 192k freed
[ 4.164739] Freeing unused kernel memory: 1944k freed
[ 4.241203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.266531] shpchp: shpcd_init: pci_register_driver = 0
[ 4.266533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.322294] udevd[131]: starting version 173
[ 4.356829] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.393554] ACPI: Power Button [PWRB]
[ 4.393740] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.393743] ACPI: Thermal Zone [TZ00] (54 C)
[ 4.393978] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.393981] ACPI: Thermal Zone [TZ01] (54 C)
[ 4.522579] pci_irq-0373 [00] pci_irq_lookup : Found
0000:04:00.0[A] _PRT entry
[ 4.522586] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 4.522610] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 4.522615] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 4.522627] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 3
[ 4.522834] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000
[ 4.522906] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 4.522913] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 4.522918] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 4.522924] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 4.522929] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 4.523002] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 4.523043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.523045] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.523047] usb usb3: Product: xHCI Host Controller
[ 4.523049] usb usb3: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd
[ 4.523050] usb usb3: SerialNumber: 0000:04:00.0
[ 4.523265] xHCI xhci_add_endpoint called for root hub
[ 4.523267] xHCI xhci_check_bandwidth called for root hub
[ 4.523328] hub 3-0:1.0: USB hub found
[ 4.523339] hub 3-0:1.0: 2 ports detected
[ 4.523379] ACPI: Sleep Button [SLPB]
[ 4.523426] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 4.523478] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 4.523488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 4
[ 4.524286] ACPI: Lid Switch [LID0]
[ 4.524340] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.524373] ACPI: Power Button [PWRF]
[ 4.526215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.526218] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.526220] usb usb4: Product: xHCI Host Controller
[ 4.526222] usb usb4: Manufacturer: Linux 3.2.0-rc6-3-desktop xhci_hcd
[ 4.526223] usb usb4: SerialNumber: 0000:04:00.0
[ 4.526375] xHCI xhci_add_endpoint called for root hub
[ 4.526377] xHCI xhci_check_bandwidth called for root hub
[ 4.526439] hub 4-0:1.0: USB hub found
[ 4.526448] hub 4-0:1.0: 2 ports detected
[ 4.526942] [drm] Initialized drm 1.1.0 20060810
[ 4.531282] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:02.0[A] _PRT entry
[ 4.531289] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.531292] i915 0000:00:02.0: setting latency timer to 64
[ 5.368663] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 5.368666] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.368667] [drm] Driver supports precise vblank timestamp query.
[ 5.378777] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call
failed
[ 5.378819] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call
failed
[ 5.378837] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.378839] vgaarb: transferring owner from PCI:0000:00:02.0 to
PCI:0000:01:00.0
[ 5.569660] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 5.609793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.621761] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.633738] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.638365] usb 3-1: New USB device found, idVendor=04ca, idProduct=0027
[ 5.642881] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.647346] usb 3-1: Product: USB Multimedia Keyboard
[ 5.651787] usb 3-1: Manufacturer: Lite-On Technology Corp.
[ 5.656387] usb 3-1: ep 0x81 - rounding interval to 128 microframes,
ep desc says 192 microframes
[ 5.660984] usb 3-1: ep 0x82 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 5.680911] input: Lite-On Technology Corp. USB Multimedia Keyboard
as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input6
[ 5.685919] generic-usb 0003:04CA:0027.0001: input,hidraw0: USB HID
v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on
usb-0000:04:00.0-1/input0
[ 5.721562] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.728628] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.735543] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.740403] input: Lite-On Technology Corp. USB Multimedia Keyboard
as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input7
[ 5.745533] generic-usb 0003:04CA:0027.0002: input,hiddev0,hidraw1:
USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard]
on usb-0000:04:00.0-1/input1
[ 5.857203] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 5.876155] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.881610] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.886481] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608
[ 5.891212] usb 3-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 5.895947] usb 3-2: Product: USB2.0 Hub
[ 5.901665] hub 3-2:1.0: USB hub found
[ 5.906793] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 5.911512] hub 3-2:1.0: 4 ports detected
[ 5.945622] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000)
[ 5.945624] fb: conflicting fb hw usage inteldrmfb vs VESA VGA -
removing generic driver
[ 5.950427] Console: switching to colour dummy device 80x25
[ 5.951515] fbcon: inteldrmfb (fb0) is primary device
[ 6.186212] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 6.200498] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.201158] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.201314] usb 3-2.4: New USB device found, idVendor=05e3,
idProduct=0608
[ 6.201321] usb 3-2.4: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 6.201327] usb 3-2.4: Product: USB2.0 Hub
[ 6.202290] hub 3-2.4:1.0: USB hub found
[ 6.202750] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.202925] hub 3-2.4:1.0: 4 ports detected
[ 6.313235] Console: switching to colour frame buffer device 236x63
[ 6.334979] fb0: inteldrmfb frame buffer device
[ 6.335054] drm: registered panic notifier
[ 6.335313] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 6.338677] acpi device:2e: registered as cooling_device4
[ 6.338816] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input8
[ 6.339007] ACPI: Video Device [PEGP] (multi-head: yes rom: yes
post: no)
[ 6.343258] acpi device:32: registered as cooling_device5
[ 6.343536] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 6.343717] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 6.343857] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 6.402163] Btrfs loaded
[ 6.443076] md: linear personality registered for level -1
[ 6.478910] device-mapper: uevent: version 1.0.3
[ 6.479053] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 6.482774] usb 3-2.4.4: new low-speed USB device number 5 using xhci_hcd
[ 6.501092] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.503088] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.504086] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[ 6.504375] usb 3-2.4.4: New USB device found, idVendor=046d,
idProduct=c063
[ 6.509607] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.514763] usb 3-2.4.4: Product: DELL USB Laser Mouse
[ 6.519906] usb 3-2.4.4: Manufacturer: DELL
[ 6.525207] usb 3-2.4.4: ep 0x81 - rounding interval to 64
microframes, ep desc says 80 microframes
[ 6.536487] input: DELL DELL USB Laser Mouse as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/input/input10
[ 6.542117] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID
v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:04:00.0-2.4.4/input0
[ 39.516864] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 39.516868] PM: Marking nosave pages: 00000000b5a28000 - 00000000b6e29000
[ 39.516926] PM: Marking nosave pages: 00000000b886a000 - 00000000b8ab3000
[ 39.516934] PM: Marking nosave pages: 00000000bac8f000 - 00000000bafff000
[ 39.516945] PM: Marking nosave pages: 00000000bb000000 - 0000000100000000
[ 39.517655] PM: Basic memory bitmaps created
[ 39.540690] PM: Basic memory bitmaps freed
[ 39.540694] video LNXVIDEO:00: Restoring backlight state
[ 39.540695] video LNXVIDEO:01: Restoring backlight state
[ 39.590164] PM: Starting manual resume from disk
[ 39.595666] PM: Hibernation image partition 253:3 present
[ 39.595669] PM: Looking for hibernation image.
[ 39.597171] PM: Image not found (code -22)
[ 39.597173] PM: Hibernation image not present or could not be loaded.
[ 39.615833] device fsid ca00ffff-8c21-4750-b25c-3cf321a07dd9 devid 1
transid 21081 /dev/mapper/system-root
[ 39.616353] btrfs: turning off barriers
[ 39.616356] btrfs: enabling auto defrag
[ 39.616357] btrfs: use lzo compression
[ 39.616358] btrfs: disk space caching is enabled
[ 39.661102] Btrfs detected SSD devices, enabling SSD mode
[ 40.401467] btrfs: turning off barriers
[ 40.407291] btrfs: enabling auto defrag
[ 40.407352] btrfs: use lzo compression
[ 40.418719] btrfs: disk space caching is enabled
[ 40.683437] systemd[1]: systemd 37 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 40.731811] systemd[1]: Set hostname to <xps15z.cristianrodriguez.net>.
[ 41.272117] udevd[606]: starting version 173
[ 41.435290] mei: module is from the staging directory, the quality is
unknown, you have been warned.
[ 41.435823] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:16.0[A] _PRT entry
[ 41.435829] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 41.435834] mei 0000:00:16.0: setting latency timer to 64
[ 41.435901] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 41.473031] iTCO_vendor_support: vendor-support=0
[ 41.477614] pci_irq-0373 [00] pci_irq_lookup : Found
0000:06:00.0[A] _PRT entry
[ 41.477622] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 41.477633] atl1c 0000:06:00.0: setting latency timer to 64
[ 41.487779] mtp-probe[752]: checking bus 3, device 2:
"/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1"
[ 41.497929] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1f.3[C] _PRT entry
[ 41.497940] IOAPIC[0]: Set routing entry (2-18 -> 0xb9 -> IRQ 18
Mode:1 Active:1 Dest:1)
[ 41.497946] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:B9 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 41.497951] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 41.503468] mtp-probe[752]: bus: 3, device: 2 was not an MTP device
[ 41.508295] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 41.508873] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 41.528598] mtp-probe[776]: checking bus 3, device 5:
"/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.4"
[ 41.533704] mtp-probe[776]: bus: 3, device: 5 was not an MTP device
[ 41.538647] btrfs: turning off barriers
[ 41.538650] btrfs: enabling auto defrag
[ 41.538653] btrfs: use lzo compression
[ 41.538653] btrfs: disk space caching is enabled
[ 41.559847] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 41.568681] mtp-probe[794]: checking bus 1, device 3:
"/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4"
[ 41.570805] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 41.578853] mtp-probe[794]: bus: 1, device: 3 was not an MTP device
[ 41.587647] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[ 41.593026] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 41.597648] Bluetooth: Core ver 2.16
[ 41.603983] NET: Registered protocol family 31
[ 41.608008] ACPI: AC Adapter [ADP0] (on-line)
[ 41.614610] Bluetooth: HCI device and connection manager initialized
[ 41.614613] Bluetooth: HCI socket layer initialized
[ 41.614615] Bluetooth: L2CAP socket layer initialized
[ 41.614622] Bluetooth: SCO socket layer initialized
[ 41.640484] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 41.643741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 41.646724] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 41.654637] microcode: Microcode Update Driver: v2.00
<tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[ 41.676921] ACPI: Deprecated procfs I/F for battery is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 41.681836] ACPI: Battery Slot [BAT0] (battery present)
[ 41.687239] wmi: Mapper loaded
[ 41.693494] Linux video capture interface: v2.00
[ 41.701454] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 41.701861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 41.701932] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 41.702023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 41.702161] usbcore: registered new interface driver btusb
[ 41.731287] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda caddy
[ 41.731291] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 41.733075] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 41.742658] cfg80211: Calling CRDA to update world regulatory domain
[ 41.755562] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 41.766095] uvcvideo: Found UVC 1.00 device
Laptop_Integrated_Webcam_2HDM (0c45:642a)
[ 41.772757] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 41.778771] Copyright(c) 2003-2011 Intel Corporation
[ 41.778833] input: Laptop_Integrated_Webcam_2HDM as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[ 41.778960] usbcore: registered new interface driver uvcvideo
[ 41.778962] USB Video Class driver (1.1.1)
[ 41.802479] pci_irq-0373 [00] pci_irq_lookup : Found
0000:00:1b.0[A] _PRT entry
[ 41.807306] pci_irq-0373 [00] pci_irq_lookup : Found
0000:03:00.0[A] _PRT entry
[ 41.807313] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 41.807344] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 41.807397] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 41.807399] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057fc000
[ 41.807401] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 41.807630] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X
[ 41.807715] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R)
Advanced-N 6230 AGN, REV=0xB0
[ 41.807861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 41.823275] iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 41.823278] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 41.823280] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 41.823300] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[ 41.829386] ifup[893]: Service network not started and mode 'auto' ->
skipping
[ 41.852847] cfg80211: World regulatory domain updated:
[ 41.852849] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 41.852850] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.852852] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 41.852853] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 41.852854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.852855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 41.920210] IOAPIC[0]: Set routing entry (2-22 -> 0xc9 -> IRQ 22
Mode:1 Active:1 Dest:1)
[ 41.920216] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:C9 Dest:00000001
SID:F0F8 SQ:0 SVT:1)
[ 41.920221] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 41.920290] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 41.920313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 41.920845] input: Dell WMI hotkeys as /devices/virtual/input/input13
[ 41.940703] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.1
build 33993
[ 41.940849] Registered led device: phy0-led
[ 41.964426] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 42.010557] ifup[964]: Service network not started and mode 'auto' ->
skipping
[ 42.174781] Adding 2097148k swap on /dev/mapper/system-swap.
Priority:0 extents:1 across:2097148k SS
[ 44.925951] ALSA hda_intel.c:812 azx_get_response timeout, switching
to polling mode: last cmd=0x000f0000
[ 45.437474] ALSA patch_realtek.c:1261 SKU: Nid=0x1d sku_cfg=0x40179a2d
[ 45.437477] ALSA patch_realtek.c:1263 SKU: port_connectivity=0x1
[ 45.437478] ALSA patch_realtek.c:1264 SKU: enable_pcbeep=0x1
[ 45.437480] ALSA patch_realtek.c:1265 SKU: check_sum=0x00000007
[ 45.437481] ALSA patch_realtek.c:1266 SKU: customization=0x0000009a
[ 45.437482] ALSA patch_realtek.c:1267 SKU: external_amp=0x5
[ 45.437483] ALSA patch_realtek.c:1268 SKU: platform_type=0x1
[ 45.437485] ALSA patch_realtek.c:1269 SKU: swap=0x0
[ 45.437486] ALSA patch_realtek.c:1270 SKU: override=0x1
[ 45.437895] ALSA hda_codec.c:4951 autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 45.437897] ALSA hda_codec.c:4955 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 45.437899] ALSA hda_codec.c:4959 hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 45.437900] ALSA hda_codec.c:4960 mono: mono_out=0x0
[ 45.437901] ALSA hda_codec.c:4964 inputs:
[ 45.437903] ALSA hda_codec.c:4968 Internal Mic=0x12
[ 45.437904] ALSA hda_codec.c:4968 Mic=0x18
[ 45.437905] ALSA hda_codec.c:4970
[ 45.439163] ALSA patch_realtek.c:1324 realtek: No valid SSID,
checking pincfg 0x40179a2d for NID 0x1d
[ 45.439165] ALSA patch_realtek.c:1340 realtek: Enabling init
ASM_ID=0x9a2d CODEC_ID=10ec0269
[ 45.443482] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 45.448591] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 45.453689] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 45.458609] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 45.710010] systemd-cryptsetup[1010]: Volume cr_sda2 already active.
[ 45.787497] systemd-fsck[1005]: /dev/sda1: limpio, 63/40000 ficheros,
137097/159744 bloques
[ 45.824455] device fsid 403609d3-a44c-4bb6-99c4-8be5430433e7 devid 1
transid 22126 /dev/mapper/system-home
[ 45.829949] btrfs: turning off barriers
[ 45.834896] btrfs: enabling auto defrag
[ 45.834957] btrfs: use lzo compression
[ 45.840735] EXT4-fs (sda1): barriers disabled
[ 45.849518] btrfs: disk space caching is enabled
[ 45.854628] EXT4-fs (sda1): mounted filesystem with writeback data
mode. Opts: acl,barrier=0,data=writeback,user_xattr
[ 45.869431] Btrfs detected SSD devices, enabling SSD mode
[ 47.174579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.174581] Bluetooth: BNEP filters: protocol multicast
[ 47.205249] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 47.215832] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 47.337233] Bluetooth: RFCOMM TTY layer initialized
[ 47.337238] Bluetooth: RFCOMM socket layer initialized
[ 47.337239] Bluetooth: RFCOMM ver 1.11
[ 47.505097] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 47.511590] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 47.635461] atl1c 0000:06:00.0: irq 53 for MSI/MSI-X
[ 47.635523] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps
Full Duplex>
[ 47.648775] NET: Registered protocol family 17
--
To unsubscribe, e-mail: opensuse-kernel+unsubscribe-stAJ6ESoqRxg9hUCZPvPmw@public.gmane.org
To contact the owner, e-mail: opensuse-kernel+owner-stAJ6ESoqRxg9hUCZPvPmw@public.gmane.org
^ permalink raw reply [flat|nested] 4+ messages in thread