From: "Rafael J. Wysocki" <rafael@kernel.org>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Linux ACPI <linux-acpi@vger.kernel.org>,
Hans de Goede <hansg@kernel.org>,
platform-driver-x86@vger.kernel.org,
Azael Avalos <coproscefalo@gmail.com>
Subject: [PATCH v1 2/7] platform/x86: toshiba_acpi: Register ACPI notify handler directly
Date: Tue, 24 Mar 2026 20:58:48 +0100 [thread overview]
Message-ID: <5070377.GXAFRqVoOG@rafael.j.wysocki> (raw)
In-Reply-To: <6262981.lOV4Wx5bFT@rafael.j.wysocki>
From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
drivers/platform/x86/toshiba_acpi.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index fbd7b6b6b826..b839f62ec9cc 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -223,6 +223,7 @@ struct toshiba_acpi_dev {
unsigned int cooling_method_supported:1;
unsigned int battery_charge_mode_supported:1;
unsigned int sysfs_created:1;
+ unsigned int notify_handler_installed:1;
unsigned int special_functions;
bool kbd_event_generated;
@@ -3193,9 +3194,10 @@ static void print_supported_features(struct toshiba_acpi_dev *dev)
pr_cont("\n");
}
-static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
+static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *data)
{
- struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev);
+ struct toshiba_acpi_dev *dev = data;
+ struct acpi_device *acpi_dev = dev->acpi_dev;
switch (event) {
case 0x80: /* Hotkeys and some system events */
@@ -3261,6 +3263,10 @@ static void toshiba_acpi_remove(struct acpi_device *acpi_dev)
remove_toshiba_proc_entries(dev);
+ if (dev->notify_handler_installed)
+ acpi_dev_remove_notify_handler(acpi_dev, ACPI_DEVICE_NOTIFY,
+ toshiba_acpi_notify);
+
#if IS_ENABLED(CONFIG_HWMON)
if (dev->hwmon_device)
hwmon_device_unregister(dev->hwmon_device);
@@ -3537,6 +3543,13 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
}
dev->sysfs_created = !ret;
+ ret = acpi_dev_install_notify_handler(acpi_dev, ACPI_DEVICE_NOTIFY,
+ toshiba_acpi_notify, dev);
+ if (ret)
+ goto error;
+
+ dev->notify_handler_installed = 1;
+
create_toshiba_proc_entries(dev);
toshiba_acpi = dev;
@@ -3602,7 +3615,6 @@ static struct acpi_driver toshiba_acpi_driver = {
.ops = {
.add = toshiba_acpi_add,
.remove = toshiba_acpi_remove,
- .notify = toshiba_acpi_notify,
},
.drv.pm = &toshiba_acpi_pm,
};
--
2.51.0
next prev parent reply other threads:[~2026-03-24 20:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 19:57 [PATCH v1 0/7] platform/x86: toshiba: Bind to platform devices instead of ACPI ones Rafael J. Wysocki
2026-03-24 19:58 ` [PATCH v1 1/7] platform/x86: toshiba_acpi: Reorder code to avoid forward declaration Rafael J. Wysocki
2026-03-24 19:58 ` Rafael J. Wysocki [this message]
2026-03-24 20:00 ` [PATCH v1 3/7] platform/x86: toshiba_acpi: Convert ACPI driver to a platform one Rafael J. Wysocki
2026-03-24 20:00 ` [PATCH v1 4/7] platform/x86: toshiba_bluetooth: Register ACPI notify handler directly Rafael J. Wysocki
2026-03-24 20:01 ` [PATCH v1 5/7] platform/x86: toshiba_bluetooth: Convert ACPI driver to a platform one Rafael J. Wysocki
2026-03-24 20:02 ` [PATCH v1 6/7] platform/x86: toshiba_haps: Register ACPI notify handler directly Rafael J. Wysocki
2026-03-24 20:03 ` [PATCH v1 7/7] platform/x86: toshiba_haps: Convert ACPI driver to a platform one Rafael J. Wysocki
2026-03-31 16:41 ` [PATCH v1 0/7] platform/x86: toshiba: Bind to platform devices instead of ACPI ones Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5070377.GXAFRqVoOG@rafael.j.wysocki \
--to=rafael@kernel.org \
--cc=coproscefalo@gmail.com \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox