From: Aaron Lu <aaron.lwe@gmail.com>
To: Felipe Contreras <felipe.contreras@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
"Rafael J. Wysocki" <rjw@sisk.pl>, Len Brown <lenb@kernel.org>,
Zhang Rui <rui.zhang@intel.com>, Jiri Kosina <trivial@kernel.org>
Subject: Re: [PATCH 2/3] acpi: video: trivial style cleanups
Date: Fri, 02 Aug 2013 09:55:25 +0800 [thread overview]
Message-ID: <51FB118D.8040205@gmail.com> (raw)
In-Reply-To: <1375400641-1694-3-git-send-email-felipe.contreras@gmail.com>
On 08/02/2013 07:44 AM, Felipe Contreras wrote:
> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Change log please.
> ---
> drivers/acpi/video.c | 90 +++++++++++++++++++++++-----------------------------
> 1 file changed, 40 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
> index f021bf4..b07573f 100644
> --- a/drivers/acpi/video.c
> +++ b/drivers/acpi/video.c
> @@ -88,7 +88,7 @@ module_param(allow_duplicates, bool, 0644);
> static bool use_bios_initial_backlight = 1;
> module_param(use_bios_initial_backlight, bool, 0644);
>
> -static int register_count = 0;
> +static int register_count;
This isn't a style clean up.
> static int acpi_video_bus_add(struct acpi_device *device);
> static int acpi_video_bus_remove(struct acpi_device *device);
> static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
> @@ -247,7 +247,7 @@ static int acpi_video_get_brightness(struct backlight_device *bd)
> * The first two entries are special - see page 575
> * of the ACPI spec 3.0
> */
> - return i-2;
> + return i - 2;
> }
> return 0;
> }
> @@ -304,11 +304,11 @@ video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long st
> struct acpi_video_device *video = acpi_driver_data(device);
> int level;
>
> - if ( state >= video->brightness->count - 2)
> + if (state >= video->brightness->count - 2)
> return -EINVAL;
>
> state = video->brightness->count - state;
> - level = video->brightness->levels[state -1];
> + level = video->brightness->levels[state - 1];
> return acpi_video_device_lcd_set_level(video, level);
> }
>
> @@ -349,7 +349,7 @@ acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
>
> return 0;
>
> - err:
> +err:
> kfree(buffer.pointer);
>
> return status;
> @@ -550,7 +550,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
> if (device->brightness->levels[i] == *level) {
> device->brightness->curr = *level;
> return 0;
> - }
> + }
> /*
> * BQC returned an invalid level.
> * Stop using it.
> @@ -892,16 +892,13 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
> {
> acpi_handle h_dummy1;
>
> - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1)))
> device->cap._ADR = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCL", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCL", &h_dummy1)))
> device->cap._BCL = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCM", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCM", &h_dummy1)))
> device->cap._BCM = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle,"_BQC",&h_dummy1)))
> + if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BQC", &h_dummy1)))
> device->cap._BQC = 1;
> else if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCQ",
> &h_dummy1))) {
> @@ -909,9 +906,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
> device->cap._BCQ = 1;
> }
>
> - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1)))
> device->cap._DDC = 1;
> - }
>
> if (acpi_video_init_brightness(device))
> return;
> @@ -922,7 +918,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
> acpi_handle acpi_parent;
> struct device *parent = NULL;
> int result;
> - static int count = 0;
> + static int count;
Same here.
> char *name;
>
> name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
> @@ -1006,24 +1002,18 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
> {
> acpi_handle h_dummy1;
>
> - if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1)))
> video->cap._DOS = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOD", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOD", &h_dummy1)))
> video->cap._DOD = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_ROM", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_ROM", &h_dummy1)))
> video->cap._ROM = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_GPD", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_GPD", &h_dummy1)))
> video->cap._GPD = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_SPD", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_SPD", &h_dummy1)))
> video->cap._SPD = 1;
> - }
> - if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_VPO", &h_dummy1))) {
> + if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_VPO", &h_dummy1)))
> video->cap._VPO = 1;
> - }
> }
>
> /*
> @@ -1082,7 +1072,7 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
> */
>
> /* device interface */
> -static struct acpi_video_device_attrib*
> +static struct acpi_video_device_attrib *
> acpi_video_get_device_attr(struct acpi_video_bus *video, unsigned long device_id)
> {
> struct acpi_video_enumerated_device *ids;
> @@ -1120,7 +1110,7 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
> unsigned long long device_id;
> int status, device_type;
> struct acpi_video_device *data;
> - struct acpi_video_device_attrib* attribute;
> + struct acpi_video_device_attrib *attribute;
>
> status =
> acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
> @@ -1142,7 +1132,7 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
>
> attribute = acpi_video_get_device_attr(video, device_id);
>
> - if((attribute != NULL) && attribute->device_id_scheme) {
> + if (attribute && attribute->device_id_scheme) {
> switch (attribute->display_type) {
> case ACPI_VIDEO_DISPLAY_CRT:
> data->flags.crt = 1;
> @@ -1160,24 +1150,24 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
> data->flags.unknown = 1;
> break;
> }
> - if(attribute->bios_can_detect)
> + if (attribute->bios_can_detect)
> data->flags.bios = 1;
> } else {
> /* Check for legacy IDs */
> device_type = acpi_video_get_device_type(video, device_id);
> /* Ignore bits 16 and 18-20 */
> switch (device_type & 0xffe2ffff) {
> - case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR:
> - data->flags.crt = 1;
> - break;
> - case ACPI_VIDEO_DISPLAY_LEGACY_PANEL:
> - data->flags.lcd = 1;
> - break;
> - case ACPI_VIDEO_DISPLAY_LEGACY_TV:
> - data->flags.tvout = 1;
> - break;
> - default:
> - data->flags.unknown = 1;
> + case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR:
> + data->flags.crt = 1;
> + break;
> + case ACPI_VIDEO_DISPLAY_LEGACY_PANEL:
> + data->flags.lcd = 1;
> + break;
> + case ACPI_VIDEO_DISPLAY_LEGACY_TV:
> + data->flags.tvout = 1;
> + break;
> + default:
> + data->flags.unknown = 1;
> }
> }
>
> @@ -1318,7 +1308,7 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video)
> video->attached_array = active_list;
> video->attached_count = count;
>
> - out:
> +out:
> kfree(buffer.pointer);
> return status;
> }
> @@ -1773,7 +1763,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
> if (!strcmp(device->pnp.bus_id, "VID")) {
> if (instance)
> device->pnp.bus_id[3] = '0' + instance;
> - instance ++;
> + instance++;
> }
> /* a hack to fix the duplicate name "VGA" problem on Pa 3553 */
> if (!strcmp(device->pnp.bus_id, "VGA")) {
> @@ -1845,16 +1835,16 @@ static int acpi_video_bus_add(struct acpi_device *device)
>
> return 0;
>
> - err_unregister_pm_notifier:
> +err_unregister_pm_notifier:
> unregister_pm_notifier(&video->pm_nb);
> - err_stop_video:
> +err_stop_video:
> acpi_video_bus_stop_devices(video);
> - err_free_input_dev:
> +err_free_input_dev:
> input_free_device(input);
> - err_put_video:
> +err_put_video:
> acpi_video_bus_put_devices(video);
> kfree(video->attached_array);
> - err_free_video:
> +err_free_video:
> kfree(video);
> device->driver_data = NULL;
>
>
Thanks,
Aaron
next prev parent reply other threads:[~2013-08-02 1:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-01 23:43 [PATCH 0/3] acpi: video: trivial cleanups Felipe Contreras
2013-08-01 23:43 ` [PATCH 1/3] acpi: video: trivial costmetic cleanups Felipe Contreras
2013-08-02 1:50 ` Aaron Lu
2013-08-02 4:15 ` Felipe Contreras
2013-08-02 14:05 ` Rafael J. Wysocki
2013-08-02 17:52 ` Felipe Contreras
2013-08-03 0:07 ` Rafael J. Wysocki
2013-08-03 1:34 ` Felipe Contreras
2013-08-03 11:38 ` Rafael J. Wysocki
2013-08-03 20:28 ` Felipe Contreras
2013-08-01 23:44 ` [PATCH 2/3] acpi: video: trivial style cleanups Felipe Contreras
2013-08-02 1:55 ` Aaron Lu [this message]
2013-08-02 4:18 ` Felipe Contreras
2013-08-02 14:09 ` Rafael J. Wysocki
2013-08-02 17:56 ` Felipe Contreras
2013-08-03 0:01 ` Rafael J. Wysocki
2013-08-03 1:28 ` Felipe Contreras
2013-08-01 23:44 ` [PATCH 3/3] acpi: video: remove unnecessary casting Felipe Contreras
2013-08-02 1:58 ` Aaron Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51FB118D.8040205@gmail.com \
--to=aaron.lwe@gmail.com \
--cc=felipe.contreras@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=rui.zhang@intel.com \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).