From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Linux PM <linux-pm@vger.kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Linux ACPI <linux-acpi@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Lukasz Luba <lukasz.luba@arm.com>
Subject: [PATCH v1] thermal: trip: Send trip change notifications on all trip updates
Date: Tue, 05 Dec 2023 20:18:39 +0100 [thread overview]
Message-ID: <5737811.DvuYhMxLoT@kreacher> (raw)
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The _store callbacks of the trip point temperature and hysteresis sysfs
attributes invoke thermal_notify_tz_trip_change() to send a notification
regarding the trip point change, but when trip points are updated by the
platform firmware, trip point change notifications are not sent.
To make the behavior after a trip point change more consistent,
modify all of the 3 places where trip point temperature is updated
to use a new function called thermal_zone_set_trip_temp() for this
purpose and make that function call thermal_notify_tz_trip_change().
Note that trip point hysteresis can only be updated via sysfs and
trip_point_hyst_store() calls thermal_notify_tz_trip_change() already,
so this code path need not be changed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Depends on https://lore.kernel.org/linux-pm/12337662.O9o76ZdvQC@kreacher/
---
drivers/acpi/thermal.c | 7 +++--
drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c | 8 +++---
drivers/thermal/thermal_sysfs.c | 4 +--
drivers/thermal/thermal_trip.c | 14 ++++++++++-
include/linux/thermal.h | 2 +
5 files changed, 27 insertions(+), 8 deletions(-)
Index: linux-pm/drivers/thermal/thermal_sysfs.c
===================================================================
--- linux-pm.orig/drivers/thermal/thermal_sysfs.c
+++ linux-pm/drivers/thermal/thermal_sysfs.c
@@ -146,9 +146,9 @@ trip_point_temp_store(struct device *dev
goto unlock;
}
- trip->temperature = temp;
+ thermal_zone_set_trip_temp(tz, trip, temp);
- thermal_zone_trip_updated(tz, trip);
+ __thermal_zone_device_update(tz, THERMAL_TRIP_CHANGED);
}
unlock:
Index: linux-pm/drivers/thermal/thermal_trip.c
===================================================================
--- linux-pm.orig/drivers/thermal/thermal_trip.c
+++ linux-pm/drivers/thermal/thermal_trip.c
@@ -152,7 +152,6 @@ int thermal_zone_trip_id(struct thermal_
*/
return trip - tz->trips;
}
-
void thermal_zone_trip_updated(struct thermal_zone_device *tz,
const struct thermal_trip *trip)
{
@@ -161,3 +160,16 @@ void thermal_zone_trip_updated(struct th
trip->hysteresis);
__thermal_zone_device_update(tz, THERMAL_TRIP_CHANGED);
}
+
+void thermal_zone_set_trip_temp(struct thermal_zone_device *tz,
+ struct thermal_trip *trip, int temp)
+{
+ if (trip->temperature == temp)
+ return;
+
+ trip->temperature = temp;
+ thermal_notify_tz_trip_change(tz->id, thermal_zone_trip_id(tz, trip),
+ trip->type, trip->temperature,
+ trip->hysteresis);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_set_trip_temp);
Index: linux-pm/include/linux/thermal.h
===================================================================
--- linux-pm.orig/include/linux/thermal.h
+++ linux-pm/include/linux/thermal.h
@@ -289,6 +289,8 @@ int thermal_zone_for_each_trip(struct th
int (*cb)(struct thermal_trip *, void *),
void *data);
int thermal_zone_get_num_trips(struct thermal_zone_device *tz);
+void thermal_zone_set_trip_temp(struct thermal_zone_device *tz,
+ struct thermal_trip *trip, int temp);
int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp);
Index: linux-pm/drivers/acpi/thermal.c
===================================================================
--- linux-pm.orig/drivers/acpi/thermal.c
+++ linux-pm/drivers/acpi/thermal.c
@@ -294,6 +294,7 @@ static int acpi_thermal_adjust_trip(stru
struct acpi_thermal_trip *acpi_trip = trip->priv;
struct adjust_trip_data *atd = data;
struct acpi_thermal *tz = atd->tz;
+ int temp;
if (!acpi_trip || !acpi_thermal_trip_valid(acpi_trip))
return 0;
@@ -304,9 +305,11 @@ static int acpi_thermal_adjust_trip(stru
acpi_thermal_update_trip_devices(tz, trip);
if (acpi_thermal_trip_valid(acpi_trip))
- trip->temperature = acpi_thermal_temp(tz, acpi_trip->temp_dk);
+ temp = acpi_thermal_temp(tz, acpi_trip->temp_dk);
else
- trip->temperature = THERMAL_TEMP_INVALID;
+ temp = THERMAL_TEMP_INVALID;
+
+ thermal_zone_set_trip_temp(tz->thermal_zone, trip, temp);
return 0;
}
Index: linux-pm/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
===================================================================
--- linux-pm.orig/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
+++ linux-pm/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
@@ -225,7 +225,8 @@ EXPORT_SYMBOL_GPL(int340x_thermal_zone_r
static int int340x_update_one_trip(struct thermal_trip *trip, void *arg)
{
- struct acpi_device *zone_adev = arg;
+ struct int34x_thermal_zone *int34x_zone = arg;
+ struct acpi_device *zone_adev = int34x_zone->adev;
int temp, err;
switch (trip->type) {
@@ -249,14 +250,15 @@ static int int340x_update_one_trip(struc
if (err)
temp = THERMAL_TEMP_INVALID;
- trip->temperature = temp;
+ thermal_zone_set_trip_temp(int34x_zone->zone, trip, temp);
+
return 0;
}
void int340x_thermal_update_trips(struct int34x_thermal_zone *int34x_zone)
{
thermal_zone_for_each_trip(int34x_zone->zone, int340x_update_one_trip,
- int34x_zone->adev);
+ int34x_zone);
}
EXPORT_SYMBOL_GPL(int340x_thermal_update_trips);
next reply other threads:[~2023-12-05 19:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 19:18 Rafael J. Wysocki [this message]
2023-12-06 14:38 ` [PATCH v1] thermal: trip: Send trip change notifications on all trip updates Daniel Lezcano
2023-12-06 16:01 ` Rafael J. Wysocki
2023-12-12 19:04 ` Rafael J. Wysocki
2023-12-12 21:02 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5737811.DvuYhMxLoT@kreacher \
--to=rjw@rjwysocki.net \
--cc=daniel.lezcano@linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=rui.zhang@intel.com \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox