From: Hans de Goede <hdegoede@redhat.com>
To: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
Andy Shevchenko <andy@kernel.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org
Subject: Re: [PATCH 2/3] ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function
Date: Sat, 27 Nov 2021 22:57:02 +0100 [thread overview]
Message-ID: <761aa221-690d-73fe-d58d-d769b83cff89@redhat.com> (raw)
In-Reply-To: <YaEBcuFw+W8LNtMW@smile.fi.intel.com>
Hi,
On 11/26/21 16:46, Andy Shevchenko wrote:
> On Fri, Nov 26, 2021 at 04:21:08PM +0100, Hans de Goede wrote:
>> The LPAT tables used in the DSDT for some PMICs require special handling,
>> allow the PMIC OpRegion drivers to provide an alternative implementation
>> by adding a lpat_raw_to_temp function pointer to struct pmic_table;
>> and initialize this to the default acpi_lpat_raw_to_temp function
>
> acpi_lpat_raw_to_temp()
>
>> for all PMICs.
>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
>
> (see one nit-pick below)
>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> drivers/acpi/pmic/intel_pmic.c | 2 +-
>> drivers/acpi/pmic/intel_pmic.h | 4 ++++
>> drivers/acpi/pmic/intel_pmic_bxtwc.c | 1 +
>> drivers/acpi/pmic/intel_pmic_bytcrc.c | 1 +
>> drivers/acpi/pmic/intel_pmic_chtcrc.c | 1 +
>> drivers/acpi/pmic/intel_pmic_chtdc_ti.c | 1 +
>> drivers/acpi/pmic/intel_pmic_chtwc.c | 1 +
>> drivers/acpi/pmic/intel_pmic_xpower.c | 1 +
>> 8 files changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
>> index 98bbfd99c709..f20dbda1a831 100644
>> --- a/drivers/acpi/pmic/intel_pmic.c
>> +++ b/drivers/acpi/pmic/intel_pmic.c
>> @@ -95,7 +95,7 @@ static int pmic_read_temp(struct intel_pmic_opregion *opregion,
>> return 0;
>> }
>>
>> - temp = acpi_lpat_raw_to_temp(opregion->lpat_table, raw_temp);
>> + temp = opregion->data->lpat_raw_to_temp(opregion->lpat_table, raw_temp);
>> if (temp < 0)
>> return temp;
>>
>> diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
>> index 467a39966dc8..d956b03a6ca0 100644
>> --- a/drivers/acpi/pmic/intel_pmic.h
>> +++ b/drivers/acpi/pmic/intel_pmic.h
>> @@ -2,6 +2,8 @@
>> #ifndef __INTEL_PMIC_H
>> #define __INTEL_PMIC_H
>>
>> +#include <acpi/acpi_lpat.h>
>> +
>> struct pmic_table {
>> int address; /* operation region address */
>> int reg; /* corresponding thermal register */
>> @@ -17,6 +19,8 @@ struct intel_pmic_opregion_data {
>> int (*update_policy)(struct regmap *r, int reg, int bit, int enable);
>> int (*exec_mipi_pmic_seq_element)(struct regmap *r, u16 i2c_address,
>> u32 reg_address, u32 value, u32 mask);
>
>> + int (*lpat_raw_to_temp)(struct acpi_lpat_conversion_table *lpat_table,
>> + int raw);
>
> Can be on one line.
I tried to stay within (or at least close too) 80 lines here as that is
still the recommended limit. The new 100 is more of a checkpatch only
change, not a change in the codingstyle docs.
With that said I'm fine with changing this. Rafael, feel free to
change this while merging. Or let me know if you want a v2.
Regards,
Hans
>
>> struct pmic_table *power_table;
>> int power_table_count;
>> struct pmic_table *thermal_table;
>> diff --git a/drivers/acpi/pmic/intel_pmic_bxtwc.c b/drivers/acpi/pmic/intel_pmic_bxtwc.c
>> index 6620ce0833f6..e247615189fa 100644
>> --- a/drivers/acpi/pmic/intel_pmic_bxtwc.c
>> +++ b/drivers/acpi/pmic/intel_pmic_bxtwc.c
>> @@ -376,6 +376,7 @@ static const struct intel_pmic_opregion_data intel_bxtwc_pmic_opregion_data = {
>> .update_aux = intel_bxtwc_pmic_update_aux,
>> .get_policy = intel_bxtwc_pmic_get_policy,
>> .update_policy = intel_bxtwc_pmic_update_policy,
>> + .lpat_raw_to_temp = acpi_lpat_raw_to_temp,
>> .power_table = power_table,
>> .power_table_count = ARRAY_SIZE(power_table),
>> .thermal_table = thermal_table,
>> diff --git a/drivers/acpi/pmic/intel_pmic_bytcrc.c b/drivers/acpi/pmic/intel_pmic_bytcrc.c
>> index 8a1d895ed689..9ea79f210965 100644
>> --- a/drivers/acpi/pmic/intel_pmic_bytcrc.c
>> +++ b/drivers/acpi/pmic/intel_pmic_bytcrc.c
>> @@ -278,6 +278,7 @@ static const struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
>> .update_aux = intel_crc_pmic_update_aux,
>> .get_policy = intel_crc_pmic_get_policy,
>> .update_policy = intel_crc_pmic_update_policy,
>> + .lpat_raw_to_temp = acpi_lpat_raw_to_temp,
>> .power_table = power_table,
>> .power_table_count= ARRAY_SIZE(power_table),
>> .thermal_table = thermal_table,
>> diff --git a/drivers/acpi/pmic/intel_pmic_chtcrc.c b/drivers/acpi/pmic/intel_pmic_chtcrc.c
>> index d8266d22cd8e..f9301c6f098e 100644
>> --- a/drivers/acpi/pmic/intel_pmic_chtcrc.c
>> +++ b/drivers/acpi/pmic/intel_pmic_chtcrc.c
>> @@ -24,6 +24,7 @@
>> * CHT Crystal Cove PMIC.
>> */
>> static const struct intel_pmic_opregion_data intel_chtcrc_pmic_opregion_data = {
>> + .lpat_raw_to_temp = acpi_lpat_raw_to_temp,
>> .pmic_i2c_address = 0x6e,
>> };
>>
>> diff --git a/drivers/acpi/pmic/intel_pmic_chtdc_ti.c b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
>> index cb444ddec5a0..418eec523025 100644
>> --- a/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
>> +++ b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
>> @@ -98,6 +98,7 @@ static const struct intel_pmic_opregion_data chtdc_ti_pmic_opregion_data = {
>> .get_power = chtdc_ti_pmic_get_power,
>> .update_power = chtdc_ti_pmic_update_power,
>> .get_raw_temp = chtdc_ti_pmic_get_raw_temp,
>> + .lpat_raw_to_temp = acpi_lpat_raw_to_temp,
>> .power_table = chtdc_ti_power_table,
>> .power_table_count = ARRAY_SIZE(chtdc_ti_power_table),
>> .thermal_table = chtdc_ti_thermal_table,
>> diff --git a/drivers/acpi/pmic/intel_pmic_chtwc.c b/drivers/acpi/pmic/intel_pmic_chtwc.c
>> index 59385a9a05e5..f2c42f4c79ca 100644
>> --- a/drivers/acpi/pmic/intel_pmic_chtwc.c
>> +++ b/drivers/acpi/pmic/intel_pmic_chtwc.c
>> @@ -257,6 +257,7 @@ static const struct intel_pmic_opregion_data intel_cht_wc_pmic_opregion_data = {
>> .get_power = intel_cht_wc_pmic_get_power,
>> .update_power = intel_cht_wc_pmic_update_power,
>> .exec_mipi_pmic_seq_element = intel_cht_wc_exec_mipi_pmic_seq_element,
>> + .lpat_raw_to_temp = acpi_lpat_raw_to_temp,
>> .power_table = power_table,
>> .power_table_count = ARRAY_SIZE(power_table),
>> };
>> diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
>> index b5f4d81c621f..e844bc1f3df5 100644
>> --- a/drivers/acpi/pmic/intel_pmic_xpower.c
>> +++ b/drivers/acpi/pmic/intel_pmic_xpower.c
>> @@ -298,6 +298,7 @@ static const struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
>> .update_power = intel_xpower_pmic_update_power,
>> .get_raw_temp = intel_xpower_pmic_get_raw_temp,
>> .exec_mipi_pmic_seq_element = intel_xpower_exec_mipi_pmic_seq_element,
>> + .lpat_raw_to_temp = acpi_lpat_raw_to_temp,
>> .power_table = power_table,
>> .power_table_count = ARRAY_SIZE(power_table),
>> .thermal_table = thermal_table,
>> --
>> 2.33.1
>>
>
next prev parent reply other threads:[~2021-11-27 21:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-26 15:21 [PATCH 1/3] ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations Hans de Goede
2021-11-26 15:21 ` [PATCH 2/3] ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function Hans de Goede
2021-11-26 15:46 ` Andy Shevchenko
2021-11-27 21:57 ` Hans de Goede [this message]
2021-11-29 9:37 ` Andy Shevchenko
2021-11-26 15:21 ` [PATCH 3/3] ACPI: PMIC: xpower: Fix _TMP ACPI errors Hans de Goede
2021-11-26 15:56 ` Andy Shevchenko
2021-11-27 21:59 ` Hans de Goede
2021-11-29 9:34 ` Andy Shevchenko
2021-11-26 15:44 ` [PATCH 1/3] ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations Andy Shevchenko
2021-12-08 14:37 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=761aa221-690d-73fe-d58d-d769b83cff89@redhat.com \
--to=hdegoede@redhat.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox