From: nicolas.olivero-39ZsbGIQGT5GWvitb5QawA@public.gmane.org
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: acpi on medion laptop
Date: Sat, 18 Oct 2003 16:19:22 +0200 (CEST) [thread overview]
Message-ID: <8359593.1066486762312.JavaMail.www@wwinf0103> (raw)
Hello,
I have some problems to make work acpi on my new laptop.
I have just install mandrake9.2.
In order to have acpi, i compile my own kernel 2.4.22 with the last
patch acpi.
extraxt of my .config :
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_RELAXED_AML is not set
After booting on my new kernel, i notice that my fan works less often
than before and as i can't see the temperature i'm anxious for my laptop....
The good thing is that now i can see the level of my battery .
[root@localhost han]# acpi -V
Battery 1: charging, 88%, 00:50:20 until charged
No support for device type: thermal
AC Adapter 1: on-line
[root@localhost han]# acpid
acpid: can't open /proc/acpi/event: Device or resource busy
[root@localhost han]# modprobe thermal
modprobe: Can't locate module thermal
But i can't see the temperature of my computer...
How can i make this work fine?
Here is my dmesg log
Thanks for any help.
[root@localhost han]# dmesg | grep ACPI
BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
ACPI: have wakeup address 0xc0001000
ACPI: RSDP (v000 OID_00 ) @ 0x000e5010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010100) @ 0x0dfffbc0
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010100) @ 0x0dfffac0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010100) @ 0x0dfffb50
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010100) @ 0x0dfffb80
ACPI: DSDT (v001 INSYDE VT8372 0x00001000 INTL 0x02002025) @ 0x00000000
ACPI: Subsystem revision 20030918
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
ACPI Namespace successfully loaded at root c02d6e7c
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
Executing all Device _STA and_INI methods:...................................... [ACPI Debug] String: LPT_STA
.[ACPI Debug] String: ECP_STA
.[ACPI Debug] String: FIR_STA
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ACPI Debug] String: LPT_STA
[ACPI Debug] String: ECP_STA
[ACPI Debug] String: ECP_STA
[ACPI Debug] String: FIR_STA
[ACPI Debug] String: FIR_STA
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ACPI Debug] Integer: 0000000000000001
ACPI: AC Adapter [AC] (on-line)
[ACPI Debug] Integer: 000000000000001F
[ACPI Debug] Package: Elements Ptr - c12aa6e8
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2)
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb574c68
[ACPI Debug] Package: Elements Ptr - cb5743e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb574ce8
[ACPI Debug] Package: Elements Ptr - cb5749e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb5749e8
[ACPI Debug] Package: Elements Ptr - cb5743e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - c12d49e8
[ACPI Debug] Package: Elements Ptr - cb5749e8
[ACPI Debug] Package: Elements Ptr - cb574ce8
[ACPI Debug] Integer: 0000000000000001
-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise
Linux in the Boardroom; in the Front Office; & in the Server Room
http://www.enterpriselinuxforum.com
next reply other threads:[~2003-10-18 14:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-18 14:19 nicolas.olivero-39ZsbGIQGT5GWvitb5QawA [this message]
[not found] ` <8359593.1066486762312.JavaMail.www-PMdOW1uaTliAmxt+E6XRvg@public.gmane.org>
2003-10-18 16:41 ` acpi on medion laptop Yury Umanets
-- strict thread matches above, loose matches on Subject: below --
2003-10-19 9:37 Nicolas Olivero
[not found] ` <28747088.1066556260752.JavaMail.www-PMdOW1uaTljBkAz3hwFLjg@public.gmane.org>
2003-10-20 8:37 ` Yury Umanets
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8359593.1066486762312.JavaMail.www@wwinf0103 \
--to=nicolas.olivero-39zsbgiqgt5gwvitb5qawa@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox