From: Punit Agrawal <punit.agrawal@arm.com>
To: linux-acpi@vger.kernel.org
Cc: lorenzo.pieralisi@arm.com, sudeep.holla@arm.com,
linux-kernel@vger.kernel.org, Borislav Petkov <bp@suse.de>,
"Rafael J . Wysocki" <rjw@rjwysocki.net>,
Punit Agrawal <punit.agrawal@arm.com>,
James Morse <james.morse@arm.com>
Subject: Re: [PATCH 2/3] GHES: Move memory initialisation to ghes_probe()
Date: Tue, 01 Aug 2017 15:04:55 +0100 [thread overview]
Message-ID: <871sovxu2g.fsf@e105922-lin.cambridge.arm.com> (raw)
In-Reply-To: <20170801133608.21017-3-punit.agrawal@arm.com> (Punit Agrawal's message of "Tue, 1 Aug 2017 14:36:07 +0100")
Punit Agrawal <punit.agrawal@arm.com> writes:
> During the driver init, the ghes driver initialises some data structures
> which are only used if a GHES platform device is probed. Similarly, the
> init function also checks for support for firmware first mode.
>
> Create a function, ghes_common_init(), that performs the initialisations
> and checks that are currently performed on driver init. The function is
> called when the GHES device is probed.
>
> Delaying initialisation and checks until probe has the added benefit of
> reducing driver prints on systems that do not support ACPI APEI.
>
> Signed-off-by: Punit Agrawal <punit.agrwal@arm.com>
I managed to get my email wrong in the signed-off-by. And git send-email
usage propagated it to the senders.
Corrected it locally but will wait for comments on the code before
re-sending.
> Cc: Borislav Petkov <bp@suse.de>
> Cc: James Morse <james.morse@arm.com>
> ---
> drivers/acpi/apei/ghes.c | 77 +++++++++++++++++++++++++++---------------------
> 1 file changed, 43 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index 007b38abcb34..befb18338acb 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -1088,12 +1088,53 @@ static inline void ghes_nmi_init_cxt(void)
> }
> #endif /* CONFIG_HAVE_ACPI_APEI_NMI */
>
> +static int ghes_common_init(void)
> +{
> + int rc;
> + static bool initialised;
> +
> + if (initialised)
> + return 0;
> +
> + ghes_nmi_init_cxt();
> +
> + rc = ghes_ioremap_init();
> + if (rc)
> + goto err;
> +
> + rc = ghes_estatus_pool_init();
> + if (rc)
> + goto err_ioremap_exit;
> +
> + rc = apei_osc_setup();
> + if (rc == 0 && osc_sb_apei_support_acked)
> + pr_info(GHES_PFX "APEI firmware first mode is enabled by APEI bit and WHEA _OSC.\n");
> + else if (rc == 0 && !osc_sb_apei_support_acked)
> + pr_info(GHES_PFX "APEI firmware first mode is enabled by WHEA _OSC.\n");
> + else if (rc && osc_sb_apei_support_acked)
> + pr_info(GHES_PFX "APEI firmware first mode is enabled by APEI bit.\n");
> + else
> + pr_info(GHES_PFX "Failed to enable APEI firmware first mode.\n");
> +
> + initialised = true;
> + return 0;
> +
> +err_ioremap_exit:
> + ghes_ioremap_exit();
> +err:
> + return rc;
> +}
> +
> static int ghes_probe(struct platform_device *ghes_dev)
> {
> struct acpi_hest_generic *generic;
> struct ghes *ghes = NULL;
>
> - int rc = -EINVAL;
> + int rc;
> +
> + rc = ghes_common_init();
> + if (rc)
> + return rc;
>
> generic = *(struct acpi_hest_generic **)ghes_dev->dev.platform_data;
> if (!generic->enabled)
> @@ -1268,8 +1309,6 @@ static struct platform_driver ghes_platform_driver = {
>
> static int __init ghes_init(void)
> {
> - int rc;
> -
> if (acpi_disabled)
> return -ENODEV;
>
> @@ -1283,36 +1322,6 @@ static int __init ghes_init(void)
> return -EINVAL;
> }
>
> - ghes_nmi_init_cxt();
> -
> - rc = ghes_ioremap_init();
> - if (rc)
> - goto err;
> -
> - rc = ghes_estatus_pool_init();
> - if (rc)
> - goto err_ioremap_exit;
> -
> - rc = platform_driver_register(&ghes_platform_driver);
> - if (rc)
> - goto err_pool_exit;
> -
> - rc = apei_osc_setup();
> - if (rc == 0 && osc_sb_apei_support_acked)
> - pr_info(GHES_PFX "APEI firmware first mode is enabled by APEI bit and WHEA _OSC.\n");
> - else if (rc == 0 && !osc_sb_apei_support_acked)
> - pr_info(GHES_PFX "APEI firmware first mode is enabled by WHEA _OSC.\n");
> - else if (rc && osc_sb_apei_support_acked)
> - pr_info(GHES_PFX "APEI firmware first mode is enabled by APEI bit.\n");
> - else
> - pr_info(GHES_PFX "Failed to enable APEI firmware first mode.\n");
> -
> - return 0;
> -err_pool_exit:
> - ghes_estatus_pool_exit();
> -err_ioremap_exit:
> - ghes_ioremap_exit();
> -err:
> - return rc;
> + return platform_driver_register(&ghes_platform_driver);
> }
> device_initcall(ghes_init);
next prev parent reply other threads:[~2017-08-01 14:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-01 13:36 [PATCH 0/3] Refactor GHES to better support non-APEI systems Punit Agrawal
2017-08-01 13:36 ` [PATCH 1/3] GHES: Expand the estatus pool in ghes_estatus_pool_init() Punit Agrawal
2017-08-01 13:36 ` [PATCH 2/3] GHES: Move memory initialisation to ghes_probe() Punit Agrawal
2017-08-01 14:04 ` Punit Agrawal [this message]
2017-08-14 19:22 ` Borislav Petkov
2017-08-15 10:10 ` Punit Agrawal
2017-08-15 8:35 ` Borislav Petkov
2017-08-15 10:31 ` Punit Agrawal
2017-08-15 10:56 ` Borislav Petkov
2017-08-01 13:36 ` [PATCH 3/3] ACPI / APEI: HEST: Don't set hest_disable if table not found Punit Agrawal
2017-08-09 9:24 ` [PATCH 0/3] Refactor GHES to better support non-APEI systems Punit Agrawal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871sovxu2g.fsf@e105922-lin.cambridge.arm.com \
--to=punit.agrawal@arm.com \
--cc=bp@suse.de \
--cc=james.morse@arm.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=rjw@rjwysocki.net \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox