Compaq evo n800c and instant reboots

Compaq evo n800c and instant reboots

[Alexander Hoogerhuis]

[-- Attachment #1: Type: text/plain, Size: 322 bytes --]

I've enjoyed working ACPI up untill about 2.6.0-something, and after
that I cannot even run the battery gauge in Gnome; the machine will
instantly reboot as soon as it reads the battery state. How do I go
about finding what causes the crash, as it is instant reboot when I
test it?

Attached is .config and dmesg output:


[-- Attachment #2: config.gz --]
[-- Type: application/octet-stream, Size: 8613 bytes --]

[-- Attachment #3: dmesg --]
[-- Type: application/octet-stream, Size: 12022 bytes --]

Linux version 2.6.3-mm2 (alexh-XxaQISg1LpM@public.gmane.org) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #3 Sat Feb 21 11:24:22 CET 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
 BIOS-e820: 000000002ffd0000 - 000000002fff0c00 (reserved)
 BIOS-e820: 000000002fff0c00 - 000000002fffc000 (ACPI NVS)
 BIOS-e820: 000000002fffc000 - 0000000030000000 (reserved)
767MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 196560
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 192464 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ                                    ) @ 0x000f9970
ACPI: RSDT (v001 COMPAQ CPQ004A  0x30040320 CPQ  0x00000001) @ 0x2fff0c84
ACPI: FADT (v002 COMPAQ CPQ004A  0x00000002 CPQ  0x00000001) @ 0x2fff0c00
ACPI: SSDT (v001 COMPAQ  CPQGysr 0x00001001 MSFT 0x0100000d) @ 0x2fff65d4
ACPI: SSDT (v001 COMPAQ   CPQMag 0x00001001 MSFT 0x0100000d) @ 0x2fff66e2
ACPI: DSDT (v001 COMPAQ  EVON800 0x00010000 MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
No local APIC present or hardware disabled
Initializing CPU#0
Kernel command line: root=/dev/hda3 ro elevator=cfq
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1694.860 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 775108k/786240k available (1520k kernel code, 10384k reserved, 705k data, 128k init, 0k highmem)
Calibrating delay loop... 3342.33 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security:  Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 3febf9ff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 3febf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU:     After all inits, caps: 3febf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C03C] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C03C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03C.C03D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03C.C04E._PRT]
ACPI: Embedded Controller [C0D0] (gpe 29)
ACPI: Power Resource [C141] (off)
ACPI: Power Resource [C155] (off)
ACPI: Power Resource [C159] (off)
ACPI: Power Resource [C15D] (off)
ACPI: Power Resource [C166] (on)
ACPI: PCI Interrupt Link [C0B6] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0B7] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [C0B8] (IRQs 5 10 11)
ACPI: PCI Interrupt Link [C0B9] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [C0BB] (IRQs)
ACPI: PCI Interrupt Link [C0BC] (IRQs)
ACPI: PCI Interrupt Link [C0BD] (IRQs)
ACPI: Power Resource [C0CF] (on)
ACPI: Power Resource [C1D5] (off)
ACPI: Power Resource [C1D6] (off)
ACPI: Power Resource [C1D7] (off)
ACPI: Power Resource [C1D8] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f3d30
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x3d5e, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
ACPI: PCI Interrupt Link [C0B8] enabled at IRQ 11
ACPI: PCI Interrupt Link [C0B7] enabled at IRQ 5
ACPI: PCI Interrupt Link [C0B6] enabled at IRQ 11
ACPI: PCI Interrupt Link [C0B9] enabled at IRQ 11
ACPI: PCI Interrupt Link [C0BA] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Cannot allocate resource region 0 of device 0000:02:0e.2
Machine check exception polling timer started.
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ACPI: AC Adapter [C11B] (on-line)
ACPI: Battery Slot [C11D] (battery present)
ACPI: Battery Slot [C11C] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C11F]
ACPI: Lid Switch [C11E]
ACPI: Fan [C1D9] (off)
ACPI: Fan [C1DA] (off)
ACPI: Fan [C1DB] (off)
ACPI: Fan [C1DC] (off)
ACPI: Processor [C000] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [TZ1] (49 C)
ACPI: Thermal Zone [TZ2] (44 C)
ACPI: Thermal Zone [TZ3] (16 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK6022GAX, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SD-R2102, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
 hda: hda1 hda2 hda3 hda4
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
 Firmware: 5.9
 Sensor: 51
 new absolute packet format
 Touchpad has extended capability bits
 -> multifinger detection
 -> palm detection
 -> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: Synaptics pass-through port at isa0060/serio4/input0
input: PS/2 Generic Mouse on synaptics-pt/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
BIOS EDD facility v0.12 2004-Jan-26, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
ACPI: (supports S0 S3 S4 S4bios S5)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 128k freed
NET: Registered protocol family 1
Adding 317512k swap on /dev/hda4.  Priority:-1 extents:1
EXT3 FS on hda3, internal journal
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 58474 usecs
intel8x0: clocking to 48000
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 256M @ 0xa0000000
i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=1)
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:02:06.0 [0e11:004a]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x00d8, PCI irq 11
Socket status: 30000006
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:08:02:63:41:CB, IRQ 10.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:02:0e.0: OHCI Host Controller
ohci_hcd 0000:02:0e.0: irq 10, pci mem f093c000
ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:02:0e.1: OHCI Host Controller
ohci_hcd 0000:02:0e.1: irq 10, pci mem f093e000
ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:02:0e.2: EHCI Host Controller
ehci_hcd 0000:02:0e.2: irq 10, pci mem f0940400
ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:02:0e.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f9580(lo)
IPv6 over IPv4 tunneling driver
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon: Module vmmon: registered with major=10 minor=165
/dev/vmmon: Module vmmon: initialized
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
vmnet: module license 'unspecified' taints kernel.
/dev/vmnet: open called by PID 10471 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
[drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon LW Mobility 7500 M7
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
/dev/vmnet: open called by PID 10986 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 11006 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
vmnet1: no IPv6 routers present
/dev/vmnet: open called by PID 11392 (vmware-vmx)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 11392 (vmware-vmx)
bridge-eth0: set IFF_PROMISC
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: clear IFF_PROMISC

[-- Attachment #4: Type: text/plain, Size: 362 bytes --]


I know the dmesg output shows I'm running VMWare, but that makes
no difference at all, it reboots just as nice without.

mvh,
A
-- 
Alexander Hoogerhuis                               | alexh-rpjHciJLgqZBDgjK7y7TUQ@public.gmane.org
CCNP - CCDP - MCNE - CCSE                          | +47 908 21 485
"You have zero privacy anyway. Get over it."  --Scott McNealy