From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick Ale Subject: Re: No Thermal Zone with a Sager NP3760 (Clevo M375E/M375W) and kernel 2.6.9 (DSDT available) Date: Fri, 22 Oct 2004 16:28:31 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <8d158e1f041022072872fb2c4d@mail.gmail.com> References: Reply-To: Patrick Ale Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Bradley Chapman Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Hi, I have an equal-ish problem with my Acer Aspire 1703SM. Before using the DSDT for the Aspire 1703SC I had thermal support but no battery support. After I that I have battery support and all but the kernel tells me happely that my temperature is critical.... as in.. 255 degrees Celcius.. somehow I dont believe him ;-) Any idea what might cause this error? On Fri, 22 Oct 2004 14:51:22 +0100, Bradley Chapman wrote: > > > (Please CC me, I am not a member of the list) > > Thermal zoning is not detected by the stock ACPI code in 2.6.9 on my > Sager NP3760 laptop (a rebranded Clevo M375E or M375W, IIRC). iasl > 20040918 spits out these errors when attempting to compile the > decompiled DSDT: > > # iasl -tc dsdt.dsl > > Intel ACPI Component Architecture > ASL Optimizing Compiler / AML Disassembler version 20030918 [Sep 18 2003] > Copyright (C) 2000 - 2003 Intel Corporation > Supports ACPI Specification Revision 2.0b > > dsdt.dsl 22: Method (_PPC, 0, NotSerialized) > Warning 2019 - ^ Not all control paths return > a value (_PPC) > > dsdt.dsl 22: Method (_PPC, 0, NotSerialized) > Warning 2026 - ^ Reserved method must return a > value (_PPC) > > dsdt.dsl 201: Method (_PSS, 0, NotSerialized) > Warning 2019 - ^ Not all control paths return > a value (_PSS) > > dsdt.dsl 201: Method (_PSS, 0, NotSerialized) > Warning 2026 - ^ Reserved method must return a > value (_PSS) > > dsdt.dsl 1081: Method (SBWB, 3, NotSerialized) > Warning 2019 - ^ Not all control paths return a value (SBWB) > > dsdt.dsl 1762: Field (SMRM, DWordAcc, NoLock, Preserve) > Error 1047 - ^ Access width is greater than region size > dsdt.dsl 1765: GSRM, 1, > Error 1051 - ^ Access width of Field Unit > extends beyond region limit > > dsdt.dsl 1766: DLCK, 1, > Error 1051 - ^ Access width of Field Unit > extends beyond region limit > > dsdt.dsl 1767: DCLS, 1, > Error 1051 - ^ Access width of Field Unit > extends beyond region limit > > dsdt.dsl 1768: DOPN, 1, > Error 1051 - ^ Access width of Field Unit > extends beyond region limit > > dsdt.dsl 3025: Method (SARA, 0, NotSerialized) > Warning 2019 - ^ Not all control paths > return a value (SARA) > > dsdt.dsl 3133: Method (WSWD, 4, NotSerialized) > Warning 2019 - ^ Not all control paths > return a value (WSWD) > > dsdt.dsl 3520: /*** Missing > EndDependentFunctions descriptor */ }) > Error 1071 - Missing > EndDependentFn() macro in dependent resource list ^ > > dsdt.dsl 3661: /*** Missing > EndDependentFunctions descriptor */ }) > Error 1071 - Missing > EndDependentFn() macro in dependent resource list ^ > > dsdt.dsl 3732: /*** Missing > EndDependentFunctions descriptor */ }) > Error 1071 - Missing > EndDependentFn() macro in dependent resource list ^ > > dsdt.dsl 3745: /*** Missing > EndDependentFunctions descriptor */ }) > Error 1071 - Missing > EndDependentFn() macro in dependent resource list ^ > > dsdt.dsl 4160: /*** Missing > EndDependentFunctions descriptor */ }) > Error 1071 - Missing > EndDependentFn() macro in dependent resource list ^ > > dsdt.dsl 4229: /*** Missing EndDependentFunctions > descriptor */ }) > Error 1071 - Missing EndDependentFn() > macro in dependent resource list ^ > > ASL Input: dsdt.dsl - 4818 lines, 154622 bytes, 2139 keywords > Compilation complete. 11 Errors, 7 Warnings, 0 Remarks, 461 Optimizations > > Do any of these errors have anything to do with it? > > 2.6.7, 2.6.8.1 and 2.6.9 have all failed to detect the thermal zone on > this machine; should I investigate a BIOS update? > > The DSDT is available here: > > http://www.pryan.org/mozilla/site/TheOneKEA/misc/dsdt.dsl > > Thanks in advance, > > Brad > > ------------------------------------------------------- > This SF.net email is sponsored by: IT Product Guide on ITManagersJournal > Use IT products in your business? Tell us what you think of them. Give us > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more > http://productguide.itmanagersjournal.com/guidepromo.tmpl > _______________________________________________ > Acpi-devel mailing list > Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org > https://lists.sourceforge.net/lists/listinfo/acpi-devel > ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl