From: "Andreas K. Huettel" <andreas.huettel@ur.de>
To: Paul Menzel <pmenzel@molgen.mpg.de>,
"Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>,
netdev <netdev@vger.kernel.org>,
intel-wired-lan@lists.osuosl.org, Jakub Kicinski <kubakici@wp.pl>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Len Brown <lenb@kernel.org>,
ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>
Subject: Re: [EXT] Re: [Intel-wired-lan] Intel I350 regression 5.10 -> 5.14 ("The NVM Checksum Is Not Valid") [8086:1521]
Date: Tue, 12 Oct 2021 21:28:36 +0200 [thread overview]
Message-ID: <9965462.DAOxP5AVGn@pinacolada> (raw)
In-Reply-To: <CAJZ5v0gf0y6qDHUJOsvLFctqn8tgKeuTYn5S9rb6+T0Sj26aKw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2525 bytes --]
Am Dienstag, 12. Oktober 2021, 19:58:47 CEST schrieb Rafael J. Wysocki:
> On Tue, Oct 12, 2021 at 7:42 PM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
> >
> > [Cc: +ACPI maintainers]
> >
> > Am 12.10.21 um 18:34 schrieb Andreas K. Huettel:
> > >>> The messages easily identifiable are:
> > >>>
> > >>> huettel@pinacolada ~/tmp $ cat kernel-messages-5.10.59.txt |grep igb
> > >>> Oct 5 15:11:18 dilfridge kernel: [ 2.090675] igb: Intel(R) Gigabit Ethernet Network Driver
> > >>> Oct 5 15:11:18 dilfridge kernel: [ 2.090676] igb: Copyright (c) 2007-2014 Intel Corporation.
> > >>> Oct 5 15:11:18 dilfridge kernel: [ 2.090728] igb 0000:01:00.0: enabling device (0000 -> 0002)
> > >>
> > >> This line is missing below, it indicates that the kernel couldn't or
> > >> didn't power up the PCIe for some reason. We're looking for something
> > >> like ACPI or PCI patches (possibly PCI-Power management) to be the
> > >> culprit here.
> > >
> > > So I did a git bisect from linux-v5.10 (good) to linux-v5.14.11 (bad).
> > >
> > > The result was:
> > >
> > > dilfridge /usr/src/linux-git # git bisect bad
> > > 6381195ad7d06ef979528c7452f3ff93659f86b1 is the first bad commit
> > > commit 6381195ad7d06ef979528c7452f3ff93659f86b1
> > > Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > Date: Mon May 24 17:26:16 2021 +0200
> > >
> > > ACPI: power: Rework turning off unused power resources
> > > [...]
> > >
> > > I tried naive reverting of this commit on top of 5.14.11. That applies nearly cleanly,
> > > and after a reboot the additional ethernet interfaces show up with their MAC in the
> > > boot messages.
> > >
> > > (Not knowing how safe that experiment was, I did not go further than single mode and
> > > immediately rebooted into 5.10 afterwards.)
>
> Reverting this is rather not an option, because the code before it was
> a one-off fix of an earlier issue, but it should be fixable given some
> more information.
>
> Basically, I need a boot log from both the good and bad cases and the
> acpidump output from the affected machine.
>
https://dev.gentoo.org/~dilfridge/igb/
^ Should all be here now.
5.10 -> "good" log (the errors are caused by missing support for my i915 graphics and hopefully unrelated)
5.14 -> "bad" log
Thank you for looking at this. If you need anything else, just ask.
Andreas
--
PD Dr. Andreas K. Huettel
Institute for Experimental and Applied Physics
University of Regensburg
93040 Regensburg
Germany
e-mail andreas.huettel@ur.de
http://www.akhuettel.de/
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 981 bytes --]
next prev parent reply other threads:[~2021-10-12 19:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1823864.tdWV9SEqCh@kailua>
[not found] ` <2944777.ktpJ11cQ8Q@pinacolada>
[not found] ` <c75203e9-0ef4-20bd-87a5-ad0846863886@intel.com>
[not found] ` <2801801.e9J7NaK4W3@kailua>
2021-10-12 17:42 ` [EXT] Re: [Intel-wired-lan] Intel I350 regression 5.10 -> 5.14 ("The NVM Checksum Is Not Valid") [8086:1521] Paul Menzel
2021-10-12 17:58 ` Rafael J. Wysocki
2021-10-12 19:28 ` Andreas K. Huettel [this message]
2021-10-14 12:09 ` Rafael J. Wysocki
2021-10-15 14:00 ` Andreas K. Huettel
2021-10-15 18:42 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9965462.DAOxP5AVGn@pinacolada \
--to=andreas.huettel@ur.de \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jesse.brandeburg@intel.com \
--cc=kubakici@wp.pl \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pmenzel@molgen.mpg.de \
--cc=rafael.j.wysocki@intel.com \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox