Linux ACPI
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org,
	rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
	guohanjun@huawei.com, mchehab@kernel.org,
	xueshuai@linux.alibaba.com, terry.bowman@amd.com,
	benjamin.cheatham@amd.com, alison.schofield@intel.com,
	sashiko-bot@kernel.org
Subject: Re: [PATCH v4 05/13] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer
Date: Tue, 25 Aug 2026 10:38:22 -0700	[thread overview]
Message-ID: <9c2ab3b9-02c3-44f2-878c-8e7f5b91bd3c@intel.com> (raw)
In-Reply-To: <20260825000523.3ab0d33d@jic23-huawei>



On 8/24/26 4:05 PM, Jonathan Cameron wrote:
> On Mon, 24 Aug 2026 10:49:28 -0700
> Dave Jiang <dave.jiang@intel.com> wrote:
> 
>> extlog_print_pcie() casts pcie_err->aer_info straight to struct
>> aer_capability_regs *. That struct embeds struct pcie_tlp_log, whose
>> software-only header_len and flit fields sit at offset 84 - inside the
>> 96-byte aer_info buffer - so the cast fills them with raw firmware bytes.
>> pcie_print_tlp_log() uses both to bound a loop over dw[], and a large
>> header_len walks past the end of the array.
>>
>> Copy aer_info into a zeroed local struct aer_capability_regs and clear
>> header_len and flit before passing it on.
> 
> The existing code is very odd. It might be nice to clean it up more
> generally so that we can handle the rest of the aer_info buffer
> via a definition that matches the hardware spec. 
> 
> For now I'd be tempted to just copy the bit of the structure that
> is matching the spec - side effect being the rest ends up as zero
> including the two things you clear.
> 
> So just copy to first 4 dw of the header log. 

Ok will do.

> 
> Jonathan
> 
> 
> 
>>
>> Reported-by: sashiko-bot@kernel.org
>> Closes: https://lore.kernel.org/linux-cxl/20260709165457.8BA181F000E9@smtp.kernel.org/
>> Fixes: e778ffefa34d ("ACPI: extlog: Trace CPER PCI Express Error Section")
>> Reviewed-by: Alison Schofield <alison.schofield@intel.com>
>> Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
>> Assisted-by: Claude:claude-sonnet-4-6
>> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
>> ---
>> v4:
>> - Dropped the now-pointless aer pointer alias.
>> ---
>>  drivers/acpi/acpi_extlog.c | 10 +++++++---
>>  1 file changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c
>> index f6e3da4e13e7..6d5532ec0920 100644
>> --- a/drivers/acpi/acpi_extlog.c
>> +++ b/drivers/acpi/acpi_extlog.c
>> @@ -137,7 +137,7 @@ static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
>>  			      int severity)
>>  {
>>  #ifdef ACPI_APEI_PCIEAER
>> -	struct aer_capability_regs *aer;
>> +	struct aer_capability_regs aer_regs = {};
>>  	struct pci_dev *pdev;
>>  	unsigned int devfn;
>>  	unsigned int bus;
>> @@ -149,7 +149,11 @@ static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
>>  		return;
>>  
>>  	aer_severity = cper_severity_to_aer(severity);
>> -	aer = (struct aer_capability_regs *)pcie_err->aer_info;
>> +
>> +	memcpy(&aer_regs, pcie_err->aer_info, sizeof(pcie_err->aer_info));
>> +	aer_regs.header_log.header_len = 0;
>> +	aer_regs.header_log.flit = false;
>> +
>>  	domain = pcie_err->device_id.segment;
>>  	bus = pcie_err->device_id.bus;
>>  	devfn = PCI_DEVFN(pcie_err->device_id.device,
>> @@ -158,7 +162,7 @@ static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
>>  	if (!pdev)
>>  		return;
>>  
>> -	pci_print_aer(pdev, aer_severity, aer);
>> +	pci_print_aer(pdev, aer_severity, &aer_regs);
>>  	pci_dev_put(pdev);
>>  #endif
>>  }
> 


  reply	other threads:[~2026-08-25 17:38 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-24 17:49 [PATCH v4 00/13] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-08-24 17:49 ` [PATCH v4 01/13] efi/cper: Reject CPER records with an out-of-range error_data_length Dave Jiang
2026-08-24 21:57   ` Jonathan Cameron
2026-08-25 16:31     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 02/13] efi/cper: Reject an error status block length that wraps a u32 Dave Jiang
2026-08-24 22:22   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 03/13] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
2026-08-24 22:28   ` Jonathan Cameron
2026-08-25 17:15     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 04/13] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-08-24 22:29   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 05/13] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-08-24 23:05   ` Jonathan Cameron
2026-08-25 17:38     ` Dave Jiang [this message]
2026-08-24 17:49 ` [PATCH v4 06/13] ACPI: extlog: Validate PCIe error section length before payload access Dave Jiang
2026-08-24 23:08   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 07/13] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-08-24 23:11   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 08/13] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-08-24 23:13   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 09/13] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-08-24 23:14   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 10/13] efi/cper: Read only validated fields in cper_mem_err_pack() Dave Jiang
2026-08-24 17:49 ` [PATCH v4 11/13] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-08-24 17:49 ` [PATCH v4 12/13] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata Dave Jiang
2026-08-24 17:49 ` [PATCH v4 13/13] cxl/ras: Make cxl_cper_handle_prot_err() static Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9c2ab3b9-02c3-44f2-878c-8e7f5b91bd3c@intel.com \
    --to=dave.jiang@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=benjamin.cheatham@amd.com \
    --cc=bp@alien8.de \
    --cc=guohanjun@huawei.com \
    --cc=jic23@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rafael@kernel.org \
    --cc=sashiko-bot@kernel.org \
    --cc=terry.bowman@amd.com \
    --cc=tony.luck@intel.com \
    --cc=xueshuai@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox