From mboxrd@z Thu Jan 1 00:00:00 1970 From: boltmelots Subject: ERROR - Could not suspend device 0000:00:1d.7: error -5 Date: Sun, 6 Mar 2005 23:20:29 +1100 Message-ID: <9ed79ee0050306042055f815bb@mail.gmail.com> Reply-To: boltmelots Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Hi all: I have recently installed FC3 on my inspiron 500m. when I try 'echo standby > /sys/power/state', I am not able to go into standby. When I run dmesg this is the output it produces. I have no idea what it means, can someone point me in the right direction please? thank you very much. -- Setu. ::::::DMESG OUTPUT::::: Stopping tasks: ==================================================================================| Badness in hcd_unlink_urb at drivers/usb/core/hcd.c:1243 [<02280052>] hcd_unlink_urb+0x18a/0x3ca [<02280dd7>] usb_kill_urb+0x11d/0x26a [<02209409>] acpi_ut_update_ref_count+0x36/0x45 [<0220960c>] acpi_ut_update_object_reference+0x1f4/0x22d [<02200be4>] acpi_evaluate_object+0x194/0x1a0 [<0227bef8>] hub_quiesce+0x12/0x49 [<0227d3fe>] hub_suspend+0x1d/0x79 [<0227b158>] usb_generic_suspend+0x38/0x3a [<02245488>] suspend_device+0x28/0x2f [<022454e3>] device_suspend+0x54/0xd8 [<0213d706>] suspend_prepare+0x48/0x6f [<0213d7b3>] enter_state+0x32/0x5e [<0213d8bf>] state_store+0x83/0x91 [<0213d83c>] state_store+0x0/0x91 [<021aad7b>] subsys_attr_store+0x19/0x21 [<021aaeee>] flush_write_buffer+0x1d/0x22 [<021aaf15>] sysfs_write_file+0x22/0x35 [<021656fa>] vfs_write+0xb6/0xe2 [<021657c4>] sys_write+0x3c/0x62 PCI: Setting latency timer of device 0000:00:1d.7 to 64 hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: reactivate --> -19 ehci_hcd 0000:00:1d.7: HC died; cleaning up Could not suspend device 0000:00:1d.7: error -5 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 7 (level, low) -> IRQ 7 hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: reactivate --> -19 hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: hub_port_status failed (err = -19) hub 1-0:1.0: reactivate --> -19 hub 2-0:1.0: reactivate --> -22 hub 3-0:1.0: reactivate --> -22 hub 4-0:1.0: reactivate --> -22 Restarting tasks... done ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click