From: Gottfried Haider <gottfried.haider@gmail.com>
To: linux-acpi@vger.kernel.org
Subject: Hang after rebooting from Windows 7 on ThinkPad X120e (after "ACPI: Core revision ...")
Date: Tue, 17 May 2011 18:19:46 +0200 [thread overview]
Message-ID: <BANLkTinubAAaWzOzE3uBUt_RqAQX8EKonA@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 600 bytes --]
Hello all,
I sometime see the kernel hang after "ACPI: Core revision 20110316" at
bootup. This _always_ happens when I reboot the machine from Windows
7.
Since the message already points to ACPI, I tried (re-)booting with
acpi=off in which case the machine manages to continue past this
point..
This is on a Lenovo ThinkPad X120e (AMD E-350 platform) with a recent
BIOS running an up-to-date 2.6.39-git. I am attaching a regular dmesg
(including the ACPI-line and the message after that) below, and also a
lspci. If you have suggestions how to further debug this, let me know.
regards,
Gottfried
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 11227 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-rc7-gohai2 (root@x120e) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #21 SMP Tue May 17 08:28:17 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc7-gohai2 root=UUID=84344aa4-9bb8-4455-92c4-a4ecb969ff3b ro crashkernel=384M-2G:64M,2G-:128M apparmor=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6f02000 (usable)
[ 0.000000] BIOS-e820: 00000000c6f02000 - 00000000c7312000 (reserved)
[ 0.000000] BIOS-e820: 00000000c7312000 - 00000000c7392000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7392000 - 00000000c73f2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c73f2000 - 00000000c7e00000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 0596CTO/0596CTO, BIOS 8FET27WW (1.11 ) 03/24/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fbcc0] fbcc0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] kernel direct mapping tables up to c7e00000 @ c7dfe000-c7e00000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ 11effe000-11f000000
[ 0.000000] RAMDISK: 366d6000 - 37363000
[ 0.000000] Reserving 128MB of memory at 736MB for crashkernel (System RAM: 4592MB)
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c73f1120 00074 (v01 LENOVO TP-8F 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c73e1000 000F4 (v04 LENOVO TP-8F 00001110 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c73e3000 0C02A (v01 LENOVO TP-8F 00001000 PTEC 00001110)
[ 0.000000] ACPI: FACS 00000000c737d000 00040
[ 0.000000] ACPI: SLIC 00000000c73f0000 00176 (v01 LENOVO TP-8F 00001110 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c73e0000 00038 (v01 LENOVO TP-8F 00001110 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c73df000 0005E (v02 LENOVO TP-8F 00001110 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c73de000 0003C (v01 LENOVO TP-8F 00001110 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73dd000 0003E (v01 LENOVO TP-8F 00001110 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73dc000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c73db000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d9000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c73d8000 0012A (v01 LENOVO TP-8F 00001110 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011eff9000 - 000000011effdfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ac00000-ffff88011dffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6f02
[ 0.000000] 0: 0x000c73f2 -> 0x000c7e00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 944285
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 799048 pages, LIFO batch:31
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 125240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6f02000 - 00000000c7312000
[ 0.000000] PM: Registered nosave memory: 00000000c7312000 - 00000000c7392000
[ 0.000000] PM: Registered nosave memory: 00000000c7392000 - 00000000c73f2000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s85120 r8192 d21376 u1048576
[ 0.000000] pcpu-alloc: s85120 r8192 d21376 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 928208
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc7-gohai2 root=UUID=84344aa4-9bb8-4455-92c4-a4ecb969ff3b ro crashkernel=384M-2G:64M,2G-:128M apparmor=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3500284k/4702208k available (5911k kernel code, 925068k absent, 276856k reserved, 5040k data, 948k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 30408704 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.944 MHz processor.
[ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.88 BogoMIPS (lpj=15969440)
[ 0.010108] pid_max: default: 32768 minimum: 301
[ 0.010202] Security Framework initialized
[ 0.010254] SELinux: Disabled at boot.
[ 0.011103] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014058] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.015416] Mount-cache hash table entries: 256
[ 0.015720] Initializing cgroup subsys ns
[ 0.015800] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.015863] Initializing cgroup subsys cpuacct
[ 0.015917] Initializing cgroup subsys memory
[ 0.015977] Initializing cgroup subsys devices
[ 0.016027] Initializing cgroup subsys freezer
[ 0.016075] Initializing cgroup subsys net_cls
[ 0.016123] Initializing cgroup subsys blkio
[ 0.016232] tseg: 00c7e00000
[ 0.016237] CPU: Physical Processor ID: 0
[ 0.016300] CPU: Processor Core ID: 0
[ 0.016347] mce: CPU supports 6 MCE banks
[ 0.021538] ACPI: Core revision 20110316
[ 0.034952] ftrace: allocating 22805 entries in 90 pages
[-- Attachment #3: lspci --]
[-- Type: application/octet-stream, Size: 2440 bytes --]
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Pavilion DM1Z-3000 Host bridge [1022:1510]
00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9802]
00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1314]
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1514]
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0]
00:15.1 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a1]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 [1022:1701]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 [1022:1702]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 [1022:1703]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 [1022:1704]
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 [1022:1718]
00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 [1022:1716]
00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 [1022:1719]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
04:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:0576] (rev 01)
reply other threads:[~2011-05-17 16:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BANLkTinubAAaWzOzE3uBUt_RqAQX8EKonA@mail.gmail.com \
--to=gottfried.haider@gmail.com \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).