Re:

Re:

[hotdi-049YEbzBPRy2DcrEJY9i8Q]

confirm 191616


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Re:

[Design Patterns Source reflector]

To get the source for the Design Patterns book, please send
a message with "send design pattern source" as the subject.
If you want a version that is zipped (instead of tarred),
please use "send zipped" as the subject.  If you want a version
in German, send "send German design pattern source" as the subject.

You can also try ftp to st.cs.uiuc.edu in /pub/patterns/dpcat,
or look at the patterns home page
(http://st-www.cs.uiuc.edu/patterns/patterns.html)

If you can't get ANYTHING to work, complain to johnson-Tmj1lob9twqeodoxqx+5/w@public.gmane.org

Thanks!
The source server.


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re:

[Mj]

[-- Attachment #1: Type: text/plain, Size: 413 bytes --]

------------------  Virus Warning Message (on the network)

Found virus WORM_BAGLE.AG in file Dog.exe
The file Dog.exe can not be moved because /var/quarantine/virus/virAIFT6oWfZ: No space left on device.

This is a machine-generated message, please do not reply via e-mail. If you have questions, please contact the Lucent Help Desk at +1 888 300 0770.

---------------------------------------------------------

[-- Attachment #2: Type: text/html, Size: 49 bytes --]

[-- Attachment #3: Type: text/plain, Size: 177 bytes --]


------------------  Virus Warning Message (on the network)

Dog.exe is removed from here because it contains a virus.

---------------------------------------------------------

Re:

[Mj]

[-- Attachment #1: Type: text/plain, Size: 417 bytes --]

------------------  Virus Warning Message (on the network)

Found virus WORM_BAGLE.AG in file Garry.com
The file Garry.com can not be moved because /var/quarantine/virus/virJWWjgUxMt: No space left on device.

This is a machine-generated message, please do not reply via e-mail. If you have questions, please contact the Lucent Help Desk at +1 888 300 0770.

---------------------------------------------------------

[-- Attachment #2: Type: text/html, Size: 53 bytes --]

[-- Attachment #3: Type: text/plain, Size: 179 bytes --]


------------------  Virus Warning Message (on the network)

Garry.com is removed from here because it contains a virus.

---------------------------------------------------------

Re:

[=?ISO-2022-JP?B?GyRCJCpKdSU1ITwlQRsoQiA8b3Rha2FyYWdldHRlckB5YWhvby5jb20+?=]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 827 bytes --]

‚n‚kE—Žq‘吶ElÈ‚̃vƒ‰ƒCƒx[ƒgƒGƒbƒ`‚É—“üI
”ÞŽ‚ÌOK‚ð‚à‚ç‚Á‚ÄŽB‰eII
‚¢‚«‚È‚è‚̃Jƒƒ‰—“ü‚ɍ¬—‚·‚é”ޏ—‚½‚¿BB
‚µ‚©‚àƒvƒŒƒC‚É‚à—“üA”ÞŽ‚ÌŒ©‚‚߂é‘O‚ÅŒ©’m‚ç‚Ê’j‚½‚¿‚ðŽó‚¯“ü‚ê‚鏗‚ÌŽq¥¥¥B
‚µ‚©‚µ‚¾‚ñ‚¾‚ñA”ޏ—‚½‚¿‚Ì‘Ì‚ð‰õŠ´‚ª•ï‚ݍž‚ÝŽn‚߂饥¥
http://hamex.tv/index2.php?35
”ÞŽˆÈŠO‚ð’m‚ç‚È‚©‚Á‚½—‚ÌŽq‚àA•’i‚Ƃ͈ႤƒvƒŒƒC‚ÉŽ©•ª‚ð–Y‚ê‚ĉõŠ´‚ð‹‚ß‚é¥¥¥B
‘fl‚È‚ç‚Å‚Í‚ÌŒvŽZ‚Å‚«‚È‚¢ƒŠƒAƒNƒVƒ‡ƒ“‚É‘å‹»•±ŠÔˆá‚¢‚È‚µ‚Å‚·BBB
‚»‚µ‚čŌã‚Í¥¥¥

http://hamex.tv/index2.php?35





NSLSRJGIOJ


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

Re:

[yuki]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1205 bytes --]

Š®„«‘S„«–³„«—¿„«•„«Žg„«‚¢„«•ú„«‘è„«
„ª„®„ª„®„ª„®„ª„®„ª„®„ª„®„ª„®„ª„®„ª„®
@@@@@@@@¤¤¤¤¤¤
http://www.checkcheck-zero.net/?id=pc120
 
Ÿ“ü‰ï”ï^”N‰ï”ï
žƒ[ƒ‹ŽóM•‘—M
Ÿ—‘z‚Ì‘ŠŽè^‚²‹ßŠŒŸõ
žŽÊ^^“®‰æ‚Ì“o˜^•‰{——
ŸZŠ^ƒAƒhƒŒƒX^“d˜b”ԍ†‚ÌŒðŠ·
 
’j«‰—«Š‚Æ‚à‚ÉŠ®‘S–³—¿‚Å‘S‚Ä‚²—˜—p’¸‚¯‚Ü‚·B
http://www.checkcheck-zero.net/?id=pc120
 
ˆÀSƒTƒCƒgéŒ¾
EEEc„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ªš
ƒ‰ƒuƒŠ[ƒ[ƒ‹‚̓Xƒ|ƒ“ƒT[ƒTƒCƒg—l‚©‚ç‚̍L—¿‚݂̂ʼn^‰c‚µ‚Ä‚¨‚è‚Ü‚·B
‚»‚ׁ̈A‘SƒT[ƒrƒX‚ðŠ®‘S–³—¿‚Å‘S‚Ä‚²—˜—p’¸‚¯‚Ü‚·B
—‘z‚Ì‘ŠŽè‚ð‹‚ß‚é•ûX‚ɈÀS‚ƐM—Š‚ð‘æˆê‚ɍl‚¦‚È‚ª‚çA
‹CŒy‚É‚¨Žg‚¢’¸‚¯‚éƒT[ƒrƒX‚ð–ÚŽw‚µA
–œ‘S‚̃Tƒ|[ƒg‘̐§‚ÅŠF—l‚ɍ‡‚Á‚½‚¨‘ŠŽè’T‚µ‚ð‚¨Žè“`‚¢‚µ‚Ä‚¨‚è‚Ü‚·B
š„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ª„ªcEEE
http://www.checkcheck-zero.net/?id=pc120

--
”zM‹‘”ہF
kissme_rej-OKxsdJkEjlFWk0Htik3J/w@public.gmane.org







-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
Register for a JBoss Training Course.  Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click

RE;

[Mrs Claire page]

I am Mrs Claire page,contact my lawyer(barlandon_watson@gala.net)

RE:

[MR PETER LUK]

I have a business proposal to share with you.

Re:

[SINOPEC OIL AND GAS COMPANY]

Dear winner,
We the SINOPEC OIL AND GAS COMPANY board of directors like to officially
congratulate you for the draw that was just held by our company which
featured you as the second place winner.Prizes won : Brand New 2010
Lamborghini Car new model and The Sum Of $570,000.00USD
(United State Dollars) cash.
FILL DETAILs BELOW;
Your Full Name : Address :Country :Phone number :Age :Gender :Occupation :
Yours,
Sinopec Oil And Gas Corp.

Re:

[Marc Ferland]

hey,
how are you?
Just  received my  Iphone 4G 16GB  from this homepage,   www.Benefits188.com
It's so cheaper but genuine, Wow. that's amazing. I like it very much!!
I paid it $690US  couier charges included , They have some other
products. If you want to get one. you can check it out !

Regards,
Marc Ferland

Re:

[lotto]

Send your Names*Address*Phone* to claim your 1,000,000 GBP awarded to
you.Reply to lotto_agent1@ymail.com for more info

Re:

[Rafael J. Wysocki]

Hi,

On Tuesday, October 30, 2012 10:42:37 AM Yinghai Lu wrote:
> Subject: [PATCH resend 0/8] PCI, ACPI, x86: pci root bus hotplug support resources assign and remove path
> 
> 1. add support for assign resource for hot add path.
> 2. stop and remove root bus during acpi root remove.
> 
> 
> could get from
>         git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-root-bus-hotplug
> 
> Yinghai Lu (8):
>   PCI: Separate out pci_assign_unassigned_bus_resources()
>   PCI: Move pci_rescan_bus() back to probe.c
>   PCI: Move out pci_enable_bridges out of assign_unsigned_bus_res
>   PCI, ACPI: assign unassigned resource for hot add root bus
>   PCI: Add pci_stop/remove_root_bus()
>   PCI, ACPI: Make acpi_pci_root_remove stop/remove pci root bus
>   PCI, ACPI: delete root bus prt during hot remove path
>   PCI, ACPI: remove acpi_root_driver in reserse order
> 
>  drivers/acpi/pci_root.c |   21 ++++++++++++++++++++-
>  drivers/pci/probe.c     |   22 ++++++++++++++++++++++
>  drivers/pci/remove.c    |   36 ++++++++++++++++++++++++++++++++++++
>  drivers/pci/setup-bus.c |   22 +---------------------
>  include/linux/pci.h     |    3 +++
>  5 files changed, 82 insertions(+), 22 deletions(-)

Please feel free to add

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

to the ACPI-related patches in this series.

Thanks,
Rafael


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re:

[Bjorn Helgaas]

On Thu, Nov 1, 2012 at 6:17 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> Hi,
>
> On Tuesday, October 30, 2012 10:42:37 AM Yinghai Lu wrote:
>> Subject: [PATCH resend 0/8] PCI, ACPI, x86: pci root bus hotplug support resources assign and remove path
>>
>> 1. add support for assign resource for hot add path.
>> 2. stop and remove root bus during acpi root remove.
>>
>>
>> could get from
>>         git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-root-bus-hotplug
>>
>> Yinghai Lu (8):
>>   PCI: Separate out pci_assign_unassigned_bus_resources()
>>   PCI: Move pci_rescan_bus() back to probe.c
>>   PCI: Move out pci_enable_bridges out of assign_unsigned_bus_res
>>   PCI, ACPI: assign unassigned resource for hot add root bus
>>   PCI: Add pci_stop/remove_root_bus()
>>   PCI, ACPI: Make acpi_pci_root_remove stop/remove pci root bus
>>   PCI, ACPI: delete root bus prt during hot remove path
>>   PCI, ACPI: remove acpi_root_driver in reserse order
>>
>>  drivers/acpi/pci_root.c |   21 ++++++++++++++++++++-
>>  drivers/pci/probe.c     |   22 ++++++++++++++++++++++
>>  drivers/pci/remove.c    |   36 ++++++++++++++++++++++++++++++++++++
>>  drivers/pci/setup-bus.c |   22 +---------------------
>>  include/linux/pci.h     |    3 +++
>>  5 files changed, 82 insertions(+), 22 deletions(-)
>
> Please feel free to add
>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> to the ACPI-related patches in this series.

I applied these to my pci/yinghai-for-pci-root-bus-hotplug branch as
v3.8 material.  They should appear in "next" tomorrow.  Thanks!

Re:

[Yinghai Lu]

On Mon, Nov 5, 2012 at 2:27 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:

> I applied these to my pci/yinghai-for-pci-root-bus-hotplug branch as
> v3.8 material.  They should appear in "next" tomorrow.  Thanks!

Thanks...

please check batch 2 at

https://patchwork.kernel.org/patch/1693211/

Yinghai

RE:

[Taku Izumi]

  Reviewed and tested by Taku Izumi <izumi.taku@jp.fujitsu.com>

> -----Original Message-----
> From: linux-pci-owner@vger.kernel.org [mailto:linux-pci-owner@vger.kernel.org] On Behalf Of Yinghai Lu
> Sent: Wednesday, October 31, 2012 2:43 AM
> To: Bjorn Helgaas; Len Brown; Taku Izumi; Jiang Liu
> Cc: linux-pci@vger.kernel.org; linux-acpi@vger.kernel.org; Yinghai Lu
> Subject:
> 
> Subject: [PATCH resend 0/8] PCI, ACPI, x86: pci root bus hotplug support resources assign and remove path
> 
> 1. add support for assign resource for hot add path.
> 2. stop and remove root bus during acpi root remove.
> 
> 
> could get from
>         git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-root-bus-hotplug
> 
> Yinghai Lu (8):
>   PCI: Separate out pci_assign_unassigned_bus_resources()
>   PCI: Move pci_rescan_bus() back to probe.c
>   PCI: Move out pci_enable_bridges out of assign_unsigned_bus_res
>   PCI, ACPI: assign unassigned resource for hot add root bus
>   PCI: Add pci_stop/remove_root_bus()
>   PCI, ACPI: Make acpi_pci_root_remove stop/remove pci root bus
>   PCI, ACPI: delete root bus prt during hot remove path
>   PCI, ACPI: remove acpi_root_driver in reserse order
> 
>  drivers/acpi/pci_root.c |   21 ++++++++++++++++++++-
>  drivers/pci/probe.c     |   22 ++++++++++++++++++++++
>  drivers/pci/remove.c    |   36 ++++++++++++++++++++++++++++++++++++
>  drivers/pci/setup-bus.c |   22 +---------------------
>  include/linux/pci.h     |    3 +++
>  5 files changed, 82 insertions(+), 22 deletions(-)
> 
> --
> 1.7.7
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

(unknown),

[Alex Barattini]

[1.] One line summary of the problem:

8086:0166 [Dell Inspiron 15R 5521] Impossible to adjust the screen backlight

[2.] Full description of the problem/report:

The change in the level of illumination of the screen, through the
corresponding option in the control panel, has no effect.

[3.] Keywords :

---------------

[4.] Kernel version (from /proc/version):

Linux version 3.13.0-031300rc3-generic (apw@gomeisa) (gcc version
4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201312061335 SMP Fri Dec 6
18:37:23 UTC 2013


[5.] Output of Oops.. message (if applicable) with symbolic
information resolved (see Documentation/oops-tracing.txt)

-------------

[6.] A small shell script or example program which triggers the
problem (if possible)

-------------

[7.] Environment

Description: Ubuntu 13.10
Release: 13.10

[7.1.] Software (add the output of the ver_linux script here)

alex@alex-Inspiron-5521:/usr/src/linux-headers-3.13.0-031300rc3/scripts$
sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux alex-Inspiron-5521 3.13.0-031300rc3-generic #201312061335 SMP
Fri Dec 6 18:37:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

Gnu C                  4.8
Gnu make               3.81
binutils               2.23.52.20130913
util-linux             2.20.1
mount                  support
module-init-tools      9
e2fsprogs              1.42.8
pcmciautils            018
PPP                    2.4.5
Linux C Library        2.17
Dynamic linker (ldd)   2.17
Procps                 3.3.3
Net-tools              1.60
Kbd                    1.15.5
Sh-utils               8.20
wireless-tools         30
Modules Loaded         nls_utf8 isofs parport_pc ppdev rfcomm bnep
nls_iso8859_1 x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel
kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel
aes_x86_64 uvcvideo lrw gf128mul arc4 joydev iwldvm videobuf2_vmalloc
glue_helper videobuf2_memops mac80211 videobuf2_core rts5139 i915
videodev ablk_helper cryptd dell_laptop dell_wmi dcdbas sparse_keymap
snd_hda_codec_hdmi snd_hda_codec_realtek drm_kms_helper snd_hda_intel
snd_hda_codec drm iwlwifi snd_hwdep snd_pcm snd_page_alloc
snd_seq_midi snd_seq_midi_event snd_rawmidi btusb snd_seq
snd_seq_device microcode snd_timer lp mei_me lpc_ich snd cfg80211
bluetooth parport psmouse mei video serio_raw i2c_algo_bit wmi
soundcore mac_hid ahci libahci r8169 mii

[7.2.] Processor information (from /proc/cpuinfo):

alex@alex-Inspiron-5521:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz
stepping : 9
microcode : 0x17
cpu MHz : 1875.515
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl
vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt
tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb
xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase
smep erms
bogomips : 3591.92
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz
stepping : 9
microcode : 0x17
cpu MHz : 1112.765
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl
vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt
tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb
xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase
smep erms
bogomips : 3591.92
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz
stepping : 9
microcode : 0x17
cpu MHz : 1331.367
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl
vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt
tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb
xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase
smep erms
bogomips : 3591.92
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz
stepping : 9
microcode : 0x17
cpu MHz : 2486.250
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl
vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt
tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb
xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase
smep erms
bogomips : 3591.92
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

[7.3.] Module information (from /proc/modules):

alex@alex-Inspiron-5521:~$ cat /proc/modules
nls_utf8 12557 1 - Live 0x0000000000000000
isofs 40285 1 - Live 0x0000000000000000
parport_pc 36962 0 - Live 0x0000000000000000
ppdev 17711 0 - Live 0x0000000000000000
rfcomm 74748 12 - Live 0x0000000000000000
bnep 19884 2 - Live 0x0000000000000000
nls_iso8859_1 12713 1 - Live 0x0000000000000000
x86_pkg_temp_thermal 14269 0 - Live 0x0000000000000000
intel_powerclamp 19031 0 - Live 0x0000000000000000
coretemp 17728 0 - Live 0x0000000000000000
kvm_intel 144426 0 - Live 0x0000000000000000
kvm 468147 1 kvm_intel, Live 0x0000000000000000
crct10dif_pclmul 14250 0 - Live 0x0000000000000000
crc32_pclmul 13160 0 - Live 0x0000000000000000
ghash_clmulni_intel 13259 0 - Live 0x0000000000000000
aesni_intel 55720 0 - Live 0x0000000000000000
aes_x86_64 17131 1 aesni_intel, Live 0x0000000000000000
uvcvideo 82247 0 - Live 0x0000000000000000
lrw 13323 1 aesni_intel, Live 0x0000000000000000
gf128mul 14951 1 lrw, Live 0x0000000000000000
arc4 12573 2 - Live 0x0000000000000000
joydev 17575 0 - Live 0x0000000000000000
iwldvm 243417 0 - Live 0x0000000000000000
videobuf2_vmalloc 13216 1 uvcvideo, Live 0x0000000000000000
glue_helper 14095 1 aesni_intel, Live 0x0000000000000000
videobuf2_memops 13362 1 videobuf2_vmalloc, Live 0x0000000000000000
mac80211 654078 1 iwldvm, Live 0x0000000000000000
videobuf2_core 40972 1 uvcvideo, Live 0x0000000000000000
rts5139 318332 0 - Live 0x0000000000000000 (C)
i915 816671 4 - Live 0x0000000000000000
videodev 139761 2 uvcvideo,videobuf2_core, Live 0x0000000000000000
ablk_helper 13597 1 aesni_intel, Live 0x0000000000000000
cryptd 20530 3 ghash_clmulni_intel,aesni_intel,ablk_helper, Live
0x0000000000000000
dell_laptop 18315 0 - Live 0x0000000000000000
dell_wmi 12681 0 - Live 0x0000000000000000
dcdbas 15017 1 dell_laptop, Live 0x0000000000000000
sparse_keymap 13890 1 dell_wmi, Live 0x0000000000000000
snd_hda_codec_hdmi 46898 1 - Live 0x0000000000000000
snd_hda_codec_realtek 61978 1 - Live 0x0000000000000000
drm_kms_helper 53224 1 i915, Live 0x0000000000000000
snd_hda_intel 57222 3 - Live 0x0000000000000000
snd_hda_codec 195017 3
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel, Live
0x0000000000000000
drm 308397 5 i915,drm_kms_helper, Live 0x0000000000000000
iwlwifi 179643 1 iwldvm, Live 0x0000000000000000
snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000
snd_pcm 107140 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec, Live
0x0000000000000000
snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000
snd_seq_midi 13324 0 - Live 0x0000000000000000
snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
snd_rawmidi 30465 1 snd_seq_midi, Live 0x0000000000000000
btusb 28326 0 - Live 0x0000000000000000
snd_seq 66061 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x0000000000000000
microcode 23788 0 - Live 0x0000000000000000
snd_timer 30038 2 snd_pcm,snd_seq, Live 0x0000000000000000
lp 17799 0 - Live 0x0000000000000000
mei_me 18578 0 - Live 0x0000000000000000
lpc_ich 21163 0 - Live 0x0000000000000000
snd 73850 17 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
Live 0x0000000000000000
cfg80211 509407 3 iwldvm,mac80211,iwlwifi, Live 0x0000000000000000
bluetooth 411140 22 rfcomm,bnep,btusb, Live 0x0000000000000000
parport 42481 3 parport_pc,ppdev,lp, Live 0x0000000000000000
psmouse 104142 0 - Live 0x0000000000000000
mei 82671 1 mei_me, Live 0x0000000000000000
video 19859 1 i915, Live 0x0000000000000000
serio_raw 13462 0 - Live 0x0000000000000000
i2c_algo_bit 13564 1 i915, Live 0x0000000000000000
wmi 19363 1 dell_wmi, Live 0x0000000000000000
soundcore 12680 1 snd, Live 0x0000000000000000
mac_hid 13253 0 - Live 0x0000000000000000
ahci 30063 4 - Live 0x0000000000000000
libahci 32277 1 ahci, Live 0x0000000000000000
r8169 73299 0 - Live 0x0000000000000000
mii 13981 1 r8169, Live 0x0000000000000000

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

alex@alex-Inspiron-5521:~$ cat /proc/ioports
0000-0cf7 : PCI Bus 0000:00
  0000-001f : dma1
  0020-0021 : pic1
  0040-0043 : timer0
  0050-0053 : timer1
  0060-0060 : keyboard
  0062-0062 : EC data
  0064-0064 : keyboard
  0066-0066 : EC cmd
  0070-0077 : rtc0
  0080-008f : dma page reg
  00a0-00a1 : pic2
  00c0-00df : dma2
  00f0-00ff : fpu
  0400-0403 : ACPI PM1a_EVT_BLK
  0404-0405 : ACPI PM1a_CNT_BLK
  0408-040b : ACPI PM_TMR
  0410-0415 : ACPI CPU throttle
  0420-042f : ACPI GPE0_BLK
  0430-0433 : iTCO_wdt
  0450-0450 : ACPI PM2_CNT_BLK
  0454-0457 : pnp 00:06
  0458-047f : pnp 00:04
    0460-047f : iTCO_wdt
  0500-057f : pnp 00:04
  0680-069f : pnp 00:04
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
  1000-100f : pnp 00:04
  164e-164f : pnp 00:04
  2000-2fff : PCI Bus 0000:01
    2000-20ff : 0000:01:00.0
      2000-20ff : r8169
  3000-303f : 0000:00:02.0
  3040-305f : 0000:00:1f.3
  3060-307f : 0000:00:1f.2
    3060-307f : ahci
  3080-3087 : 0000:00:1f.2
    3080-3087 : ahci
  3088-308f : 0000:00:1f.2
    3088-308f : ahci
  3090-3093 : 0000:00:1f.2
    3090-3093 : ahci
  3094-3097 : 0000:00:1f.2
    3094-3097 : ahci
  fd60-fd63 : pnp 00:04
  ffff-ffff : pnp 00:04
    ffff-ffff : pnp 00:04

alex@alex-Inspiron-5521:~$ cat /proc/iomem
00000000-00000fff : reserved
00001000-00087fff : System RAM
00088000-000bffff : reserved
  000a0000-000bffff : PCI Bus 0000:00
000c0000-000c3fff : PCI Bus 0000:00
000c4000-000c7fff : PCI Bus 0000:00
000c8000-000cbfff : PCI Bus 0000:00
000cc000-000cffff : PCI Bus 0000:00
000d0000-000d3fff : PCI Bus 0000:00
000d4000-000d7fff : PCI Bus 0000:00
000d8000-000dbfff : PCI Bus 0000:00
000dc000-000dffff : PCI Bus 0000:00
000e0000-000e3fff : PCI Bus 0000:00
000e4000-000e7fff : PCI Bus 0000:00
000e8000-000ebfff : PCI Bus 0000:00
000ec000-000effff : PCI Bus 0000:00
000f0000-000fffff : PCI Bus 0000:00
  000f0000-000fffff : System ROM
00100000-1fffffff : System RAM
  02000000-0277171d : Kernel code
  0277171e-02d1bdbf : Kernel data
  02e78000-02fdcfff : Kernel bss
20000000-201fffff : reserved
  20000000-201fffff : pnp 00:0a
20200000-40003fff : System RAM
40004000-40004fff : reserved
  40004000-40004fff : pnp 00:0a
40005000-a0baffff : System RAM
a0bb0000-a13affff : reserved
a13b0000-a9dbefff : System RAM
a9dbf000-aaebefff : reserved
aaebf000-aafbefff : ACPI Non-volatile Storage
aafbf000-aaffefff : ACPI Tables
aafff000-aaffffff : System RAM
ab000000-af9fffff : reserved
  aba00000-af9fffff : Graphics Stolen Memory
afa00000-feafffff : PCI Bus 0000:00
  afa00000-afa00fff : pnp 00:09
  b0000000-bfffffff : 0000:00:02.0
    b0000000-b0407fff : BOOTFB
  c0000000-c03fffff : 0000:00:02.0
  c0400000-c04fffff : PCI Bus 0000:01
    c0400000-c0403fff : 0000:01:00.0
      c0400000-c0403fff : r8169
    c0404000-c0404fff : 0000:01:00.0
      c0404000-c0404fff : r8169
  c0500000-c05fffff : PCI Bus 0000:02
    c0500000-c0501fff : 0000:02:00.0
      c0500000-c0501fff : iwlwifi
  c0600000-c060ffff : 0000:00:14.0
    c0600000-c060ffff : xhci_hcd
  c0610000-c0613fff : 0000:00:1b.0
    c0610000-c0613fff : ICH HD audio
  c0614000-c061400f : 0000:00:16.0
    c0614000-c061400f : mei_me
  c0615000-c06150ff : 0000:00:1f.3
  c0617000-c06177ff : 0000:00:1f.2
    c0617000-c06177ff : ahci
  c0618000-c06183ff : 0000:00:1d.0
    c0618000-c06183ff : ehci_hcd
  c0619000-c06193ff : 0000:00:1a.0
    c0619000-c06193ff : ehci_hcd
  e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
    e0000000-efffffff : reserved
      e0000000-efffffff : pnp 00:09
feb00000-feb03fff : reserved
fec00000-fec00fff : reserved
  fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fed10000-fed19fff : reserved
  fed10000-fed17fff : pnp 00:09
  fed18000-fed18fff : pnp 00:09
  fed19000-fed19fff : pnp 00:09
fed1c000-fed1ffff : reserved
  fed1c000-fed1ffff : pnp 00:09
    fed1f410-fed1f414 : iTCO_wdt
fed20000-fed3ffff : pnp 00:09
fed90000-fed90fff : dmar0
fed91000-fed91fff : dmar1
fee00000-fee00fff : Local APIC
  fee00000-fee00fff : reserved
ff000000-ff000fff : pnp 00:09
ffb80000-ffffffff : reserved
100000000-14f5fffff : System RAM
14f600000-14fffffff : RAM buffer

[7.5.] PCI information ('lspci -vvv' as root)

alex@alex-Inspiron-5521:~$ sudo lspci -vvv
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM
Controller (rev 09)
Subsystem: Dell Device 0597
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core
processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 0597
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018  Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device 0597
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at c0600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee002f8  Data: 0000
Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210
Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 0597
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at c0614000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00378  Data: 0000
Kernel driver in use: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 0597
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0619000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller (rev 04)
Subsystem: Dell Device 0597
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at c0610000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003d8  Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000  Data: 0000
Capabilities: [90] Subsystem: Dell Device 0597
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c0500000-c05fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000  Data: 0000
Capabilities: [90] Subsystem: Dell Device 0597
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 0597
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c0618000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC
Controller (rev 04)
Subsystem: Dell Device 0597
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 0597
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at c0617000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00358  Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller (rev 04)
Subsystem: Dell Device 0597
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at c0615000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Dell Device 0597
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00318  Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 50-00-00-00-36-4c-e0-00
Kernel driver in use: r8169

02:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at c0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00398  Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 60-36-dd-ff-ff-cc-6b-6d
Kernel driver in use: iwlwifi

[7.6.] SCSI information (from /proc/scsi/scsi)

alex@alex-Inspiron-5521:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: WDC WD10JPVT-75A Rev: 01.0
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: PLDS     Model: DVD+-RW DU-8A5HH Rev: SD11
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
  Vendor: Generic- Model: xD/SD/M.S.       Rev: 1.00
  Type:   Direct-Access                    ANSI  SCSI revision: 02

[7.7.] Other information that might be relevant to the problem (please
look in /proc and include all information that you think to be
relevant):

alex@alex-Inspiron-5521:~$ ls /proc
1     1372  1522  1827  2302  370  531  96             loadavg
10    1375  1523  1831  2312  371  54   97             locks
1053  1376  1524  1848  2314  376  56   acpi           mdstat
1058  1381  1525  1856  24    377  57   asound         meminfo
1063  1383  153   1858  2423  38   576  buddyinfo      misc
1064  1386  154   1859  2427  386  58   bus            modules
1068  1391  155   1863  2432  387  59   cgroups        mounts
11    1396  1555  1885  2466  388  60   cmdline        mtrr
1145  1397  157   189   25    39   61   consoles       net
1149  1399  1574  1894  26    40   62   cpuinfo        pagetypeinfo
1162  14    1579  19    2679  41   7    crypto         partitions
1168  1406  1598  1900  2688  410  717  devices        sched_debug
1185  1408  16    1901  2689  412  735  diskstats      schedstat
1188  1443  160   1902  27    42   74   dma            scsi
12    1464  1638  1908  2763  420  749  driver         self
1209  1467  1639  1909  2766  43   752  execdomains    slabinfo
1214  1469  1680  1930  2776  44   782  fb             softirqs
1224  148   17    1938  28    45   796  filesystems    stat
1225  149   172   1944  29    46   8    fs             swaps
1239  1498  173   1965  297   466  822  interrupts     sys
13    15    1785  2     3     47   824  iomem          sysrq-trigger
1306  150   1787  20    304   476  831  ioports        sysvipc
1310  1506  1788  2031  31    477  850  irq            timer_list
1316  151   1789  2037  32    478  856  kallsyms       timer_stats
1319  1510  1795  2054  33    49   860  kcore          tty
1348  1511  18    21    34    5    865  key-users      uptime
1351  1515  1800  22    341   50   870  kmsg           version
1352  1517  1810  2213  35    51   872  kpagecount     vmallocinfo
1354  1518  1814  2235  36    52   875  kpageflags     vmstat
1368  152   1822  23    37    53   9    latency_stats  zoneinfo

[X.] Other notes, patches, fixes, workarounds:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261853

Re:

[Aaron Lu]

On 12/22/2013 12:48 AM, Alex Barattini wrote:
> [1.] One line summary of the problem:
> 
> 8086:0166 [Dell Inspiron 15R 5521] Impossible to adjust the screen backlight
> 
> [2.] Full description of the problem/report:
> 
> The change in the level of illumination of the screen, through the
> corresponding option in the control panel, has no effect.

Does this patch help?
http://www.spinics.net/lists/linux-acpi/msg47755.html

Re:

[Alex Barattini]

At the moment, set acpi_backlight=vendor on GRUB as a workaround,
works only with kernel version 3.11.0-14-generic (Ubuntu stable
kernel).
Set the workaround in the Kernel v3.13-rc5 produce blackscreen at startup.
You can see the update and the evolution of the bug here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261853

2013/12/23 Aaron Lu <aaron.lu@intel.com>:
> On 12/22/2013 12:48 AM, Alex Barattini wrote:
>> [1.] One line summary of the problem:
>>
>> 8086:0166 [Dell Inspiron 15R 5521] Impossible to adjust the screen backlight
>>
>> [2.] Full description of the problem/report:
>>
>> The change in the level of illumination of the screen, through the
>> corresponding option in the control panel, has no effect.
>
> Does this patch help?
> http://www.spinics.net/lists/linux-acpi/msg47755.html
>

RE:

[Qin's Yanjun]

How are you today and your family? I require your attention and honest
co-operation about some issues which i will really want to discuss with you
which.  Looking forward to read from you soon.  

Qin's


______________________________

Sky Silk, http://aknet.kz

Re:

[H.A]

With profound love in my heart, I Kindly Oblige your interest to very important proposal.. It is Truly Divine and require your utmost attention..........

S hlubokou láskou v mém srdci, Laskave jsem prinutit svuj zájem k návrhu .. Je velmi duležité, skutecne Divine a vyžadují vaši nejvyšší pozornost.

  Kontaktujte me prímo pres: helenaroberts99@gmail.com pro úplné podrobnosti.complete.


HELINA .A ROBERTS

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Re:

[Amos Kalonzo]

Attn:

I am wondering why You haven't respond to my email for some days now.
reference to my client's contract balance payment of (11.7M,USD)
Kindly get back to me for more details.

Best Regards

Amos Kalonzo

Re:

[Hans de Goede]

Hi,

On 11/2/21 22:16, Stephen Boyd wrote:
> Quoting Hans de Goede (2021-11-02 02:49:01)
>> diff --git a/drivers/clk/clk-tps68470.c b/drivers/clk/clk-tps68470.c
>> new file mode 100644
>> index 000000000000..2ad0ac2f4096
>> --- /dev/null
>> +++ b/drivers/clk/clk-tps68470.c
>> @@ -0,0 +1,257 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Clock driver for TPS68470 PMIC
>> + *
>> + * Copyright (c) 2021 Red Hat Inc.
>> + * Copyright (C) 2018 Intel Corporation
>> + *
>> + * Authors:
>> + *     Hans de Goede <hdegoede@redhat.com>
>> + *     Zaikuo Wang <zaikuo.wang@intel.com>
>> + *     Tianshu Qiu <tian.shu.qiu@intel.com>
>> + *     Jian Xu Zheng <jian.xu.zheng@intel.com>
>> + *     Yuning Pu <yuning.pu@intel.com>
>> + *     Antti Laakso <antti.laakso@intel.com>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mfd/tps68470.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/platform_data/tps68470.h>
>> +#include <linux/regmap.h>
>> +
>> +#define TPS68470_CLK_NAME "tps68470-clk"
>> +
>> +#define to_tps68470_clkdata(clkd) \
>> +       container_of(clkd, struct tps68470_clkdata, clkout_hw)
>> +
> [...]
>> +
>> +static int tps68470_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>> +                                unsigned long parent_rate)
>> +{
>> +       struct tps68470_clkdata *clkdata = to_tps68470_clkdata(hw);
>> +       unsigned int idx = tps68470_clk_cfg_lookup(rate);
>> +
>> +       if (rate != clk_freqs[idx].freq)
>> +               return -EINVAL;
>> +
>> +       clkdata->clk_cfg_idx = idx;
> 
> It deserves a comment that set_rate can only be called when the clk is
> gated. We have CLK_SET_RATE_GATE flag as well that should be set if the
> clk can't support changing rate while enabled. With that flag set, this
> function should be able to actually change hardware with the assumption
> that the framework won't call down into this clk_op when the clk is
> enabled.

Ok for v6 I've added the CLK_SET_RATE_GATE flag + a comment why
it used and moved the divider programming to tps68470_clk_set_rate()m
while keeping the PLL_EN + output-enable writes in tps68470_clk_prepare()


> 
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct clk_ops tps68470_clk_ops = {
>> +       .is_prepared = tps68470_clk_is_prepared,
>> +       .prepare = tps68470_clk_prepare,
>> +       .unprepare = tps68470_clk_unprepare,
>> +       .recalc_rate = tps68470_clk_recalc_rate,
>> +       .round_rate = tps68470_clk_round_rate,
>> +       .set_rate = tps68470_clk_set_rate,
>> +};
>> +
>> +static const struct clk_init_data tps68470_clk_initdata = {
> 
> Is there a reason to make this a static global? It's probably better to
> throw it on the stack so that a structure isn't sitting around after
> driver probe being unused.

Fixed for v6.

Thanks & Regards,

Hans


> 
>> +       .name = TPS68470_CLK_NAME,
>> +       .ops = &tps68470_clk_ops,
>> +};
>