Re: [PATCH v2] PCI: acpiphp: Reassign resources on bridge if necessary

[Bjorn Helgaas <helgaas@kernel.org>]

On Tue, May 30, 2023 at 02:16:36PM -0400, Michael S. Tsirkin wrote:
> On Tue, May 30, 2023 at 12:12:44PM -0500, Bjorn Helgaas wrote:
> > On Mon, Apr 24, 2023 at 09:15:57PM +0200, Igor Mammedov wrote:
> > > When using ACPI PCI hotplug, hotplugging a device with
> > > large BARs may fail if bridge windows programmed by
> > > firmware are not large enough.
> > > 
> > > Reproducer:
> > >   $ qemu-kvm -monitor stdio -M q35  -m 4G \
> > >       -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \
> > >       -device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \
> > >       disk_image
> > > 
> > >  wait till linux guest boots, then hotplug device
> > >    (qemu) device_add qxl,bus=rp1
> > > 
> > >  hotplug on guest side fails with:
> > >    pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
> > >    pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
> > >    pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
> > >    pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
> > >    pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x001f]
> > >    pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
> > >    pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
> > >    pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
> > >    pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
> > >    pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
> > >    pci 0000:01:00.0: BAR 3: assigned [io  0x1000-0x101f]
> > >    qxl 0000:01:00.0: enabling device (0000 -> 0003)
> > 
> > Ugh, I just noticed that we turned on PCI_COMMAND_MEMORY even though
> > BARs 0 and 1 haven't been assigned.  How did that happen?  It looks
> > like pci_enable_resources() checks for that, but there must be a hole
> > somewhere.
> 
> Maybe because BAR2 was assigned? I think pci_enable_resources just
> does
>                 if (r->flags & IORESOURCE_MEM)
>                         cmd |= PCI_COMMAND_MEMORY;
> in a loop so if any memory BARs are assigned then PCI_COMMAND_MEMORY
> is set.

It does, but it also bails out if it finds IORESOURCE_UNSET:

  pci_enable_resources()
  {
    ...
    pci_dev_for_each_resource(dev, r, i) {
      ...
      if (r->flags & IORESOURCE_UNSET) {
        pci_err(dev, "can't enable device: BAR %d %pR not assigned\n");
        return -EINVAL;
      }
      ...
      if (r->flags & IORESOURCE_MEM)
        cmd |= PCI_COMMAND_MEMORY;
    }
    ...
  }

I expected that IORESOURCE_UNSET would still be there from
pci_assign_resource(), since we saw the "failed to assign" messages,
but there must be more going on.

Bjorn