From: Alison Schofield <alison.schofield@intel.com>
To: Robert Richter <rrichter@amd.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
Dave Hansen <dave.hansen@linux.intel.com>,
Dan Williams <dan.j.williams@intel.com>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-cxl@vger.kernel.org, Len Brown <lenb@kernel.org>
Subject: Re: [PATCH v2 2/3] ACPI/NUMA: Print CXL Early Discovery Table (CEDT)
Date: Wed, 20 Mar 2024 10:47:48 -0700 [thread overview]
Message-ID: <ZfshRI/xAbSLJDQT@aschofie-mobl2> (raw)
In-Reply-To: <20240319120026.2246389-3-rrichter@amd.com>
On Tue, Mar 19, 2024 at 01:00:24PM +0100, Robert Richter wrote:
> The CEDT contains similar entries as the SRAT. For diagnostic reasons
> print the CEDT same style as the SRAT.
Richard,
Acpitools is not properly handling the CFMWS at the moment. When
that gets fixed up, might you be good using acpidump/extract.
If you're going to dump, how about dumping it all? Add the fields
interleave arithmetic, qtg_id, xormap_list[].
While debugging issues in this space I have wished for more info
like this:
1) acpi_parse_cfmws() pr_warn's upon failure to add a node but is
quiet on success. A pr_info on success, showing that a new memblk
and node was added would be useful.
2) numa_add_memblks() if memblk was extended pr_info the info.
If you can incorporate here, great!
Thanks,
Alison
>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> ---
> drivers/acpi/numa/srat.c | 112 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 112 insertions(+)
>
> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
> index e45e64993c50..50ae8557e8d1 100644
> --- a/drivers/acpi/numa/srat.c
> +++ b/drivers/acpi/numa/srat.c
> @@ -300,6 +300,114 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
> return -EINVAL;
> }
>
> +static int __init
> +__acpi_table_print_cedt_entry(union acpi_subtable_headers *__header,
> + void *arg, const unsigned long table_end)
> +{
> + struct acpi_cedt_header *header = (struct acpi_cedt_header *)__header;
> +
> + switch (header->type) {
> + case ACPI_CEDT_TYPE_CHBS:
> + {
> + struct acpi_cedt_chbs *p =
> + (struct acpi_cedt_chbs *)header;
> +
> + if (header->length < sizeof(struct acpi_cedt_chbs)) {
> + pr_warn("CEDT: unsupported CHBS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + pr_info("CEDT: CHBS (0x%llx length 0x%llx uid %lu) %s (%d)\n",
> + (unsigned long long)p->base,
> + (unsigned long long)p->length,
> + (unsigned long)p->uid,
> + (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) ?
> + "cxl11" :
> + (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL20) ?
> + "cxl20" :
> + "unsupported version",
> + p->cxl_version);
> + }
> + break;
> + case ACPI_CEDT_TYPE_CFMWS:
> + {
> + struct acpi_cedt_cfmws *p =
> + (struct acpi_cedt_cfmws *)header;
> + int eiw_to_ways[] = {1, 2, 4, 8, 16, 3, 6, 12};
> + int targets = -1;
> +
> + if (header->length < sizeof(struct acpi_cedt_cfmws)) {
> + pr_warn("CEDT: unsupported CFMWS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + if (p->interleave_ways < ARRAY_SIZE(eiw_to_ways))
> + targets = eiw_to_ways[p->interleave_ways];
> + if (header->length < struct_size(
> + p, interleave_targets, targets))
> + targets = -1;
> +
> + pr_info("CEDT: CFMWS (0x%llx length 0x%llx) with %d target%s",
> + (unsigned long long)p->base_hpa,
> + (unsigned long long)p->window_size,
> + targets, targets > 1 ? "s" : "");
> + for (int i = 0; i < targets; i++)
> + pr_cont("%s%lu", i ? ", " : " (",
> + (unsigned long)p->interleave_targets[i]);
> + pr_cont("%s%s%s%s%s%s\n",
> + targets > 0 ? ")" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE2) ?
> + " type2" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE3) ?
> + " type3" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_VOLATILE) ?
> + " volatile" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_PMEM) ?
> + " pmem" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_FIXED) ?
> + " fixed" : "");
> + }
> + break;
> + case ACPI_CEDT_TYPE_CXIMS:
> + {
> + struct acpi_cedt_cxims *p =
> + (struct acpi_cedt_cxims *)header;
> +
> + if (header->length < sizeof(struct acpi_cedt_cxims)) {
> + pr_warn("CEDT: unsupported CXIMS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + pr_info("CEDT: CXIMS (hbig %u nr_xormaps %u)\n",
> + (unsigned int)p->hbig,
> + (unsigned int)p->nr_xormaps);
> + }
> + break;
> + default:
> + pr_warn("CEDT: Found unsupported entry (type = 0x%x)\n",
> + header->type);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static void __init acpi_table_print_cedt_entry(enum acpi_cedt_type id)
> +{
> + acpi_table_parse_cedt(id, __acpi_table_print_cedt_entry, NULL);
> +}
> +
> +static void __init acpi_table_print_cedt(void)
> +{
> + /* Print only implemented CEDT types */
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CHBS);
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CFMWS);
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CXIMS);
> +}
> +
> static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> void *arg, const unsigned long table_end)
> {
> @@ -341,6 +449,7 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> return 0;
> }
> #else
> +static inline void acpi_table_print_cedt(void) {}
> static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> void *arg, const unsigned long table_end)
> {
> @@ -526,6 +635,9 @@ int __init acpi_numa_init(void)
> /* SLIT: System Locality Information Table */
> acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
>
> + /* CEDT: CXL Early Discovery Table */
> + acpi_table_print_cedt();
> +
> /*
> * CXL Fixed Memory Window Structures (CFMWS) must be parsed
> * after the SRAT. Create NUMA Nodes for CXL memory ranges that
> --
> 2.39.2
>
next prev parent reply other threads:[~2024-03-20 17:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-19 12:00 [PATCH v2 0/3] SRAT/CEDT fixes and updates Robert Richter
2024-03-19 12:00 ` [PATCH v2 1/3] x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks() Robert Richter
2024-03-19 20:15 ` Dan Williams
2024-03-21 8:09 ` Robert Richter
2024-03-20 17:46 ` Alison Schofield
2024-03-21 16:55 ` Robert Richter
2024-03-21 18:39 ` Alison Schofield
2024-03-21 22:17 ` Robert Richter
2024-03-19 12:00 ` [PATCH v2 2/3] ACPI/NUMA: Print CXL Early Discovery Table (CEDT) Robert Richter
2024-03-19 20:18 ` Dan Williams
2024-03-20 17:47 ` Alison Schofield [this message]
2024-03-19 12:00 ` [PATCH v2 3/3] ACPI/NUMA: Remove architecture dependent remainings Robert Richter
2024-03-19 20:44 ` Dan Williams
2024-03-22 2:12 ` kernel test robot
2024-03-28 16:49 ` Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZfshRI/xAbSLJDQT@aschofie-mobl2 \
--to=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rrichter@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox