From: Aaron Rainbolt <arainbolt@kfocus.org>
To: Mario Limonciello <mario.limonciello@amd.com>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: rafael@kernel.org, lenb@kernel.org, mmikowski@kfocus.org,
Perry.Yuan@amd.com
Subject: Re: [PATCH V3] acpi: Allow ignoring _OSC CPPC v2 bit via kernel parameter
Date: Tue, 18 Jun 2024 23:33:29 -0500 [thread overview]
Message-ID: <ZnJfmUXmU_tsb9pV@kf-XE> (raw)
In-Reply-To: <ZnIAX9P5XSco4cZw@kf-XE>
acpi: Allow ignoring _OSC CPPC v2 bit via kernel parameter
The _OSC is supposed to contain a bit indicating whether the hardware
supports CPPC v2 or not. This bit is not always set, causing CPPC v2 to
be considered absent. This results in severe single-core performance
issues with the EEVDF scheduler on heterogenous-core Intel processors.
To work around this, provide a new kernel parameter, "ignore_osc_cppc_bit",
which may be used to ignore the _OSC CPPC v2 bit and act as if the bit was
enabled. This allows CPPC to be properly detected even if not "enabled" by
_OSC, allowing users with problematic hardware to obtain decent single-core
performance.
Tested-by: Michael Mikowski <mmikowski@kfocus.org>
Signed-off-by: Aaron Rainbolt <arainbolt@kfocus.org>
---
V2 -> V3: Move bit ignore to before switch.
V1 -> V2: Rewrite to work in cpc_supported_by_cpu.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index b600df82669d..af2d8973ba3a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2063,6 +2063,12 @@
could change it dynamically, usually by
/sys/module/printk/parameters/ignore_loglevel.
+ ignore_osc_cppc_bit
+ Assume CPPC is present and ignore the CPPC v2 bit from
+ the ACPI _OSC method. This is useful for working
+ around buggy firmware where CPPC is supported, but
+ _OSC incorrectly reports it as being absent.
+
ignore_rlimit_data
Ignore RLIMIT_DATA setting for data mappings,
print warning at first misuse. Can be changed via
diff --git a/arch/x86/kernel/acpi/cppc.c b/arch/x86/kernel/acpi/cppc.c
index ff8f25faca3d..0ca1eac826af 100644
--- a/arch/x86/kernel/acpi/cppc.c
+++ b/arch/x86/kernel/acpi/cppc.c
@@ -11,8 +11,20 @@
/* Refer to drivers/acpi/cppc_acpi.c for the description of functions */
+static bool ignore_osc_cppc_bit;
+static int __init parse_ignore_osc_cppc_bit(char *arg)
+{
+ ignore_osc_cppc_bit = true;
+ return 0;
+}
+early_param("ignore_osc_cppc_bit", parse_ignore_osc_cppc_bit);
+
bool cpc_supported_by_cpu(void)
{
+ if (ignore_osc_cppc_bit) {
+ return true;
+ }
+
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
case X86_VENDOR_HYGON:
next prev parent reply other threads:[~2024-06-19 4:33 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-18 2:54 [PATCH] acpi: Allow ignoring _OSC CPPC v2 bit via kernel parameter Aaron Rainbolt
2024-06-18 17:09 ` Mario Limonciello
2024-06-18 18:30 ` Aaron Rainbolt
2024-06-18 18:35 ` Mario Limonciello
2024-06-18 18:52 ` Aaron Rainbolt
2024-06-18 18:58 ` Mario Limonciello
2024-06-18 19:25 ` Aaron Rainbolt
2024-06-18 19:27 ` Mario Limonciello
2024-06-18 20:25 ` [PATCH V2 RFC] " Aaron Rainbolt
2024-06-18 20:58 ` Aaron Rainbolt
2024-06-18 21:24 ` Mario Limonciello
2024-06-18 21:47 ` Aaron Rainbolt
2024-06-19 4:33 ` Aaron Rainbolt [this message]
2024-06-19 5:08 ` [PATCH V3] " Mario Limonciello
2024-06-19 17:09 ` Rafael J. Wysocki
2024-06-19 17:30 ` Rafael J. Wysocki
2024-06-19 17:44 ` Aaron Rainbolt
2024-06-19 17:56 ` Aaron Rainbolt
2024-06-19 21:39 ` Aaron Rainbolt
2024-06-19 22:19 ` Aaron Rainbolt
2024-06-20 1:05 ` Aaron Rainbolt
2024-06-20 15:40 ` Rafael J. Wysocki
2024-06-19 17:34 ` Aaron Rainbolt
2024-06-19 17:37 ` Rafael J. Wysocki
2024-06-18 18:31 ` [PATCH] " kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZnJfmUXmU_tsb9pV@kf-XE \
--to=arainbolt@kfocus.org \
--cc=Perry.Yuan@amd.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mmikowski@kfocus.org \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox