public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
From: Marc MERLIN <marc@merlins.org>
To: linux-acpi@vger.kernel.org
Subject: Re: s2idle on kdell xps 9730 does go to sleep but laptop is warm
Date: Sat, 31 May 2025 14:26:32 -0700	[thread overview]
Message-ID: <aDt0CH4zO96pxdIu@merlins.org> (raw)
In-Reply-To: <aCWbk4z50QYym9gV@merlins.org>

This is still a problem. Is there more info I can provide? For now it's
bad enough that I can't have the battery be in S3 sleep for 24H without
the batteries running out :-/

On Thu, May 15, 2025 at 12:45:23AM -0700, Marc MERLIN wrote:
> and burn a lot of battery during full kernel sleep
> Reply-To: 
> X-Sysadmin: BOFH
> X-URL: http://marc.merlins.org/
> 
>  With kernel 6.6.9 when I put the laptop to sleep, syslog shows that the
>  laptop was sleeping for 9h, fans were stopped, but when I gabbed my
>  laptop it was warm and burned 80% of the battery overnight.
> 
> And yet, linux was not running, my logs show the kernel went into ACPI
> sleep and back out
> 
> Logs show the system slept for 9h and went to sleep with s2idle.
> 
> Is it the wrong sleep outside of suspend to disk and full shutdown?
> 
> Are there devices that should have been powered off but didn't
> (evidently yes since battery loss was 80% and laptop was warm)
> 
> logs below
> 
> 2025-05-14T00:01:20 merlin root: >>>>>>>>>> suspend  #1 1747206080
> 
> 2025-05-14T00:01:21 merlin dbus-daemon[2846]: [system] Activating via systemd: service name='org.wicd.daemon' unit='dbus-org.wicd.daemon.service' requested by ':1.1130' (uid=0 pid=3357435 comm="/usr/bin/python3 /usr/share/wicd/daemon/suspend.py")
> 2025-05-14T00:01:21 merlin dbus-daemon[2846]: [system] Activation via systemd failed for unit 'dbus-org.wicd.daemon.service': Unit dbus-org.wicd.daemon.service not found.
> 2025-05-14T00:01:21 merlin kernel: [1388664.621668] PM: suspend entry (s2idle)
> 2025-05-14T00:01:21 merlin kernel: [1388664.625122] Filesystems sync: 0.003 seconds
> 2025-05-14T09:20:43 merlin kernel: [1388664.635518] Freezing user space processes
> 2025-05-14T09:20:43 merlin kernel: [1388664.638313] Freezing user space processes completed (elapsed 0.002 seconds)
> 2025-05-14T09:20:43 merlin kernel: [1388664.638320] OOM killer disabled.
> 2025-05-14T09:20:43 merlin kernel: [1388664.638322] Freezing remaining freezable tasks
> 2025-05-14T09:20:43 merlin kernel: [1388664.640285] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
> 2025-05-14T09:20:43 merlin kernel: [1388664.640290] printk: Suspending console(s) (use no_console_suspend to debug)
> (...)
> 2025-05-14T09:20:43 merlin kernel: [1422225.195325] OOM killer enabled.
> 2025-05-14T09:20:43 merlin kernel: [1422225.195328] Restarting tasks ... done.
> 2025-05-14T09:20:43 merlin kernel: [1422225.204356] vgaarb: client 0x00000000f7b9cd5c called 'target'
> 2025-05-14T09:20:43 merlin kernel: [1422225.204376] vgaarb: PCI:0000:00:02.0 ==> 0000:00:02.0 pdev 00000000dec5b5e7
> 2025-05-14T09:20:43 merlin kernel: [1422225.204383] vgaarb: vgadev 00000000dca48b8a
> 2025-05-14T09:20:43 merlin kernel: [1422225.321870] PM: suspend exit
> 
> Thanks,
> Marc
> -- 
> "A mouse is a device used to point at the xterm you want to type in" - A.S.R.
>  
> Home page: http://marc.merlins.org/                       | PGP 7F55D5F27AAF9D08
> 

-- 
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
 
Home page: http://marc.merlins.org/                       | PGP 7F55D5F27AAF9D08

  reply	other threads:[~2025-05-31 21:26 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-15  7:45 s2idle on kdell xps 9730 does go to sleep but laptop is warm Marc MERLIN
2025-05-31 21:26 ` Marc MERLIN [this message]
2025-05-31 23:16   ` Theodore Ts'o
2025-06-01 14:23     ` Marc MERLIN
2025-06-02 14:23 ` Rafael J. Wysocki
2025-06-02 20:56   ` Marc MERLIN
2025-06-27 22:51     ` Marc MERLIN

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aDt0CH4zO96pxdIu@merlins.org \
    --to=marc@merlins.org \
    --cc=linux-acpi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox