From: Len Brown <lenb@kernel.org>
To: akpm@linux-foundation.org
Cc: linux-acpi@vger.kernel.org, bjorn.helgaas@hp.com, ThJaeger@gmail.com
Subject: Re: [patch (for 2.6.26?) 1/3] pnpacpi: fix IRQ flag decoding
Date: Tue, 10 Jun 2008 12:05:27 -0400 (EDT) [thread overview]
Message-ID: <alpine.LFD.1.10.0806101204370.14381@localhost.localdomain> (raw)
In-Reply-To: <200806092352.m59Nq46D015765@imap1.linux-foundation.org>
yes, i think these three do look like 2.6.26 material
and i've got them on the bugzilla-9487 branch in my tree now.
thanks,
-Len
On Mon, 9 Jun 2008, akpm@linux-foundation.org wrote:
> From: Bjorn Helgaas <bjorn.helgaas@hp.com>
>
> When decoding IRQ trigger mode and polarity, it is not enough to mask by
> IORESOURCE_BITS because there are now additional bits defined. For
> example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering
> and *polarity at all.
>
> I can't point to a failure that this patch fixes, but
> bugs in this area have caused problems when resuming after
> suspend, for example:
>
> http://bugzilla.kernel.org/show_bug.cgi?id=6316
> http://bugzilla.kernel.org/show_bug.cgi?id=9487
> https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187
>
> This is based on a patch by Tom Jaeger:
> http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32
>
> [rene.herman@keyaccess.nl: fix comment]
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> Cc: Tom Jaeger <ThJaeger@gmail.com>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
> drivers/pnp/pnpacpi/rsparser.c | 16 ++++++++++++----
> include/linux/ioport.h | 6 +++---
> 2 files changed, 15 insertions(+), 7 deletions(-)
>
> diff -puN drivers/pnp/pnpacpi/rsparser.c~pnpacpi-fix-irq-flag-decoding drivers/pnp/pnpacpi/rsparser.c
> --- a/drivers/pnp/pnpacpi/rsparser.c~pnpacpi-fix-irq-flag-decoding
> +++ a/drivers/pnp/pnpacpi/rsparser.c
> @@ -56,9 +56,11 @@ static int irq_flags(int triggering, int
> return flags;
> }
>
> -static void decode_irq_flags(int flag, int *triggering, int *polarity)
> +static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering,
> + int *polarity)
> {
> - switch (flag) {
> + switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL |
> + IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) {
> case IORESOURCE_IRQ_LOWLEVEL:
> *triggering = ACPI_LEVEL_SENSITIVE;
> *polarity = ACPI_ACTIVE_LOW;
> @@ -75,6 +77,12 @@ static void decode_irq_flags(int flag, i
> *triggering = ACPI_EDGE_SENSITIVE;
> *polarity = ACPI_ACTIVE_HIGH;
> break;
> + default:
> + dev_err(&dev->dev, "can't encode invalid IRQ mode %#x\n",
> + flags);
> + *triggering = ACPI_EDGE_SENSITIVE;
> + *polarity = ACPI_ACTIVE_HIGH;
> + break;
> }
> }
>
> @@ -790,7 +798,7 @@ static void pnpacpi_encode_irq(struct pn
> struct acpi_resource_irq *irq = &resource->data.irq;
> int triggering, polarity;
>
> - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
> + decode_irq_flags(dev, p->flags, &triggering, &polarity);
> irq->triggering = triggering;
> irq->polarity = polarity;
> if (triggering == ACPI_EDGE_SENSITIVE)
> @@ -813,7 +821,7 @@ static void pnpacpi_encode_ext_irq(struc
> struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq;
> int triggering, polarity;
>
> - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
> + decode_irq_flags(dev, p->flags, &triggering, &polarity);
> extended_irq->producer_consumer = ACPI_CONSUMER;
> extended_irq->triggering = triggering;
> extended_irq->polarity = polarity;
> diff -puN include/linux/ioport.h~pnpacpi-fix-irq-flag-decoding include/linux/ioport.h
> --- a/include/linux/ioport.h~pnpacpi-fix-irq-flag-decoding
> +++ a/include/linux/ioport.h
> @@ -53,14 +53,14 @@ struct resource_list {
> #define IORESOURCE_AUTO 0x40000000
> #define IORESOURCE_BUSY 0x80000000 /* Driver has marked this resource busy */
>
> -/* ISA PnP IRQ specific bits (IORESOURCE_BITS) */
> +/* PnP IRQ specific bits (IORESOURCE_BITS) */
> #define IORESOURCE_IRQ_HIGHEDGE (1<<0)
> #define IORESOURCE_IRQ_LOWEDGE (1<<1)
> #define IORESOURCE_IRQ_HIGHLEVEL (1<<2)
> #define IORESOURCE_IRQ_LOWLEVEL (1<<3)
> #define IORESOURCE_IRQ_SHAREABLE (1<<4)
>
> -/* ISA PnP DMA specific bits (IORESOURCE_BITS) */
> +/* PnP DMA specific bits (IORESOURCE_BITS) */
> #define IORESOURCE_DMA_TYPE_MASK (3<<0)
> #define IORESOURCE_DMA_8BIT (0<<0)
> #define IORESOURCE_DMA_8AND16BIT (1<<0)
> @@ -76,7 +76,7 @@ struct resource_list {
> #define IORESOURCE_DMA_TYPEB (2<<6)
> #define IORESOURCE_DMA_TYPEF (3<<6)
>
> -/* ISA PnP memory I/O specific bits (IORESOURCE_BITS) */
> +/* PnP memory I/O specific bits (IORESOURCE_BITS) */
> #define IORESOURCE_MEM_WRITEABLE (1<<0) /* dup: IORESOURCE_READONLY */
> #define IORESOURCE_MEM_CACHEABLE (1<<1) /* dup: IORESOURCE_CACHEABLE */
> #define IORESOURCE_MEM_RANGELENGTH (1<<2) /* dup: IORESOURCE_RANGELENGTH */
> _
>
prev parent reply other threads:[~2008-06-10 16:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-09 23:52 [patch (for 2.6.26?) 1/3] pnpacpi: fix IRQ flag decoding akpm
2008-06-10 16:05 ` Len Brown [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.1.10.0806101204370.14381@localhost.localdomain \
--to=lenb@kernel.org \
--cc=ThJaeger@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=bjorn.helgaas@hp.com \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox