ACER Aspire 5000

ACER Aspire 5000

[Matt R Hall]

[-- Attachment #1: Type: text/plain, Size: 16557 bytes --]

I am having some problems with ACPI battery support on an ACER Aspire
5000. I am unable to read the battery state, which makes this laptop
nearly useless. I suspect the DSDT code was missing a variable
declaration or something and this was not caught by Microsoft's
compiler, but I'm nowhere near expert with the DSDT programming
language, so some help would be greatly appreciated.

Relevant ASCII information is included inline. The /proc/acpi/dsdt file
is attached.

Please note that I compiled the ACPI support as modules for
troubleshooting purposes. If this is bad please let me know and I can
do a static link. BTW, it did not seem to work when compiled statically
either.

Thanks in advance!

uname -a output:
Linux themhalltop 2.6.13 #1 Mon Aug 29 00:52:21 PDT 2005 i686 GNU/Linux




dmesg output that occurs reading the /proc/acpi/battery/BAT1/state
file:
  psargs-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
search_node c142a1a8 start_node c142a1a8 return_node 00000000
 dswexec-0457 [439] ds_exec_end_op        : [Index]: Could not resolve
operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST]
(Node ddec0ee8), AE_NOT_FOUND
acpi_battery-0208 [431] acpi_battery_get_statu: Error evaluating _BST




dmesg output from boot cycle:
Linux version 2.6.13 (root@themhalltop) (gcc version 4.0.2 20050821
(prerelease) (Debian 4.0.1-6)) #1 Mon Aug 29 00:52:21 PDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
 BIOS-e820: 000000001def0000 - 000000001defa000 (ACPI data)
 BIOS-e820: 000000001defa000 - 000000001df00000 (ACPI NVS)
 BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
478MB LOWMEM available.
found SMP MP-table at 000f7fd0
On node 0 totalpages: 122608
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 118512 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7f60
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @
0x1def61be
ACPI: FADT (v001 SiS    755F     0x06040000 PTL  0x000f4240) @
0x1def9e5f
ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @
0x1def9ed3
ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @
0x1def9f88
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @
0x1def9fd8
ACPI: DSDT (v001 PTLTD       755 0x06040000 MSFT 0x0100000e) @
0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dff00000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=linux root=303 ec_burst=0
ACPI: EC polling mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1600.563 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 480092k/490432k available (3827k kernel code, 9780k reserved,
1237k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay using timer specific routine.. 3201.22 BogoMIPS
(lpj=1600613)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010
00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Turion(tm) 64 Mobile Technology ML-30 stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
 tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully
acquired
Parsing all Control
Methods:..................................................................................
Table [DSDT](id F005) - 496 Objects with 38 Devices 82 Methods 12
Regions
Parsing all Control Methods:
Table [SSDT](id F003) - 3 Objects with 0 Devices 0 Methods 0 Regions
ACPI Namespace successfully loaded at root c06496a0
evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode
successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs
on int 0xB
evgpeblk-1024 [06] ev_create_gpe_block   : Found 7 Wake, Enabled 0
Runtime GPEs in this block
evgpeblk-1016 [06] ev_create_gpe_block   : GPE 10 to 1F [_GPE] 2 regs
on int 0xB
evgpeblk-1024 [06] ev_create_gpe_block   : Found 0 Wake, Enabled 0
Runtime GPEs in this block
Completing Region/Field/Buffer/Package
initialization:.........................................................
 psargs-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
search_node c142a1a8 start_node c142a1a8 return_node 00000000

  nsinit-0316 [06] ns_init_one_object    : Could not execute arguments
for [PBST] (Package), AE_NOT_FOUND
.........
Initialized 12/12 Regions 5/5 Fields 26/26 Buffers 23/30 Packages (508
nodes)
Executing all Device _STA and_INI
methods:..........................................
42 Devices found containing: 42 _STA, 1 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 25)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 7 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: a000-afff
  MEM window: e2100000-e21fffff
  PREFETCH window: e8000000-efffffff
PCI: Bus 2, cardbus bridge: 0000:00:06.0
  IO window: 00002400-000024ff
  IO window: 00002800-000028ff
  PREFETCH window: 20000000-21ffffff
  MEM window: 22000000-23ffffff
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
pnp: 00:03: ioport range 0x8000-0x807f could not be reserved
pnp: 00:03: ioport range 0x8080-0x80ff has been reserved
pnp: 00:03: ioport range 0x8100-0x811f has been reserved
pnp: 00:03: ioport range 0x4d0-0x4d1 has been reserved
Simple Boot Flag at 0x38 set to 0x1
IA-32 Microcode Update Driver: v1.14 <tigran-DTz5qymZ9yRBDgjK7y7TUQ@public.gmane.org>
NTFS driver 2.1.23 [Flags: R/O].
SGI XFS with ACLs, no debug enabled
Initializing Cryptographic API
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60
sec (nowayout= 1)
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 760 chipset
agpgart: AGP aperture is 4M @ 0xe0000000
[drm] Initialized drm 1.0.0 20040925
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin
is 60 seconds).
Hangcheck: Using monotonic_clock().
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
disabled
acpi_bus-0212 [08] acpi_bus_set_power    : Device is not power
manageable
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt for device 0000:00:02.6 disabled
io scheduler noop registered
io scheduler cfq registered
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe-l3A5Bk7waGM@public.gmane.org) and
petero2-zq6IREYz3ykAvxtiuMwx3w@public.gmane.org
sis900.c: v1.08.08 Jan. 22 2005
acpi_bus-0212 [08] acpi_bus_set_power    : Device is not power
manageable
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 169
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
0000:00:04.0: Using transceiver found at address 13 as default
eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 169, 00:c0:9f:a6:f3:00.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 185
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9808210A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
Yenta: ISA IRQ mask 0x06f8, PCI irq 169
Socket status: 30000020
acpi_bus-0212 [08] acpi_bus_set_power    : Device is not power
manageable
ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
ehci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 2.0
Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 193, io mem 0xe2004000
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec
2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 201
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0
Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 201, io mem 0xe2002000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 209
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0
Controller (#2)
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 209, io mem 0xe2003000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28
12:20:13 2005 UTC).
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
input: AT Translated Set 2 keyboard on isa0060/serio0
intel8x0_measure_ac97_clock: measured 50518 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
ALSA device list:
  #0: SiS SI7012 with ALC203 at 0x1400, irq 177
  #1: SiS SI7013 Modem at 0x1000, irq 177
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
Disabled Privacy Extensions on device c059b760(lo)
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version
1.50.3)
powernow-k8:    0 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x4 (1450 mV)
cpu_init done, current fid 0x8, vid 0x4
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0  LAN MODM USB0 USB1 USB2 USB3 
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps:
0xa04713/0x4000
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
UDF-fs: No VRS found
XFS mounting filesystem hda3
Ending clean XFS mount for filesystem: hda3
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 180k freed
Adding 979924k swap on /dev/hda1.  Priority:-1 extents:1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
wlan: 0.8.6.0 (EXPERIMENTAL)
ath_rate_sample: 1.2
ath_pci: 0.9.6.0 (EXPERIMENTAL)
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 169
Build date: Aug 29 2005
Debugging version (IEEE80211)
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps
ath0: H/W encryption support: WEP AES AES_CCM TKIP
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
Debugging version (ATH)
ath0: Atheros 5212: mem=0x22000000, irq=169
input: PC Speaker
eth0: Media Link On 100mbps full-duplex 
eth0: no IPv6 routers present
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (58 C)

[-- Attachment #2: 3686650991-dsdt --]
[-- Type: application/octet-stream, Size: 15469 bytes --]

Re: ACER Aspire 5000

[Manuel J.Galan]

Matt R Hall <mhall@...> writes:

> 
> I am having some problems with ACPI battery support on an ACER Aspire
> 5000. I am unable to read the battery state, which makes this laptop
> nearly useless. I suspect the DSDT code was missing a variable
> declaration or something and this was not caught by Microsoft's
> compiler, but I'm nowhere near expert with the DSDT programming
> language, so some help would be greatly appreciated.
> 
> Relevant ASCII information is included inline. The /proc/acpi/dsdt file
> is attached.
> 

try to patch your dsdt.dsl with the following
================================================
--- dstd.dsl.old        2005-08-30 15:26:55.000000000 +0100
+++ dstd.dsl    2005-08-30 15:26:35.000000000 +0100
@@ -2,7 +2,7 @@
  * Intel ACPI Component Architecture
  * AML Disassembler version 20050624
  *
- * Disassembly of dstd, Tue Aug 30 15:26:55 2005
+ * Disassembly of dstd, Tue Aug 30 15:12:42 2005
  */
 DefinitionBlock ("DSDT.aml", "DSDT", 1, "PTLTD ", "755", 100925440)
 {
@@ -144,7 +144,10 @@

     Scope (_PR)
     {
-        Processor (CPU0, 0x00, 0x00008010, 0x06) {}
+        Processor (CPU0, 0x00, 0x00008010, 0x06)
+       {
+               External (_PPC) // added. mjgalan
+       }
     }

     Scope (\_SB)
@@ -3007,8 +3010,8 @@
             Name (PBST, Package (0x04)
             {
                 0x00,
-                Z007,
-                Z007,
+                Z006,  // changed from Z007. mjgalan
+                Z006,  // changed from Z007. mjgalan
                 0x2710
             })
             Name (ERRC, 0x00)
@@ -3399,6 +3402,7 @@
         {
             \_SB.PHSR (0x03, 0x00)
         }
+       Return(Package(0x02){0x00, 0x00}) // added. mjgalan
     }

     Method (_PTS, 1, NotSerialized)
========================================================



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Hans Kristian Rosbach]

Patching the dsdt.dsl isn't exactly for the faint at heart,
so I am wondering wether this will be possible to work around
automagicly for known problems on specific models?

I did contact Acer and ask them to just apply some easy fixes
for the Ferrari 4005 battery detection. The reply I got was
very surprising. Basicly she told me they don't want my
business if I use anything other than windows.

I'll probably try again at some later point if this is going
to be a problem for long. It seems that they think it's not
worth while to support Linux users at all.

And since windows somehow doesn't have the same problem it's
unlikely to ever be fixed even though it is an actual bug in
their bios implementation.

</rant>
-HK



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Erik Slagter]

[-- Attachment #1: Type: text/plain, Size: 541 bytes --]

On Wed, 2005-08-31 at 10:01 +0200, Hans Kristian Rosbach wrote:

> I did contact Acer and ask them to just apply some easy fixes
> for the Ferrari 4005 battery detection. The reply I got was
> very surprising. Basicly she told me they don't want my
> business if I use anything other than windows.

Dell is even worse. If you tell them you run Linux on your laptop they
will try to convince you it may damage your hardware and you won't get
any guarantee whatsoever etc. (this in reply to a simple purely hardware
based question)

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Carl-Daniel Hailfinger]

Erik Slagter schrieb:
> On Wed, 2005-08-31 at 10:01 +0200, Hans Kristian Rosbach wrote:
> 
> 
>>I did contact Acer and ask them to just apply some easy fixes
>>for the Ferrari 4005 battery detection. The reply I got was
>>very surprising. Basicly she told me they don't want my
>>business if I use anything other than windows.
> 
> 
> Dell is even worse. If you tell them you run Linux on your laptop they
> will try to convince you it may damage your hardware and you won't get
> any guarantee whatsoever etc. (this in reply to a simple purely hardware
> based question)

There are enough programs available for windows which can damage
hardware just fine. Besides that, it is impossible to determine
whether Linux ever was installed on such a machine if you make
a backup of the harddisk before the first boot and restore that
backup if problems appear.


Regards,
Carl-Daniel
-- 
http://www.hailfinger.org/


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Erik Slagter]

[-- Attachment #1: Type: text/plain, Size: 1032 bytes --]

On Wed, 2005-08-31 at 12:15 +0200, Carl-Daniel Hailfinger wrote:
> >>I did contact Acer and ask them to just apply some easy fixes
> >>for the Ferrari 4005 battery detection. The reply I got was
> >>very surprising. Basicly she told me they don't want my
> >>business if I use anything other than windows.
> > 
> > 
> > Dell is even worse. If you tell them you run Linux on your laptop they
> > will try to convince you it may damage your hardware and you won't get
> > any guarantee whatsoever etc. (this in reply to a simple purely hardware
> > based question)
> 
> There are enough programs available for windows which can damage
> hardware just fine. Besides that, it is impossible to determine
> whether Linux ever was installed on such a machine if you make
> a backup of the harddisk before the first boot and restore that
> backup if problems appear.

Well actually, that's not my biggest issue. It's the attitude of
complete ignorance and at the same time complete arrogance that really
pisses me off.

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Alan Cox]

On Mer, 2005-08-31 at 10:52 +0200, Erik Slagter wrote:
> Dell is even worse. If you tell them you run Linux on your laptop they
> will try to convince you it may damage your hardware and you won't get
> any guarantee whatsoever etc. (this in reply to a simple purely hardware
> based question)

Random Dell techies might. If you've got specific demonstrable BIOS bugs
in modern Dell laptops make sure the Dell Linux folks get them but in an
easy to reproduce form, or with a fix. If you can get something through
to the Dell BIOS people my experience so far is that it actually gets
fixed. Getting something that far into Dell is "interesting"



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Carl-Daniel Hailfinger]

Alan Cox schrieb:
> On Mer, 2005-08-31 at 10:52 +0200, Erik Slagter wrote:
> 
>>Dell is even worse. If you tell them you run Linux on your laptop they
>>will try to convince you it may damage your hardware and you won't get
>>any guarantee whatsoever etc. (this in reply to a simple purely hardware
>>based question)
> 
> 
> Random Dell techies might. If you've got specific demonstrable BIOS bugs
> in modern Dell laptops make sure the Dell Linux folks get them but in an
> easy to reproduce form, or with a fix. If you can get something through
> to the Dell BIOS people my experience so far is that it actually gets
> fixed. Getting something that far into Dell is "interesting"

For many vendors, contacting some higher-level staff at trade fairs gets
you better contacts than any other method. Especially if you offer to
supply a detailed technical description of the problem and tell them
their engineering will find a solution inside that description. Keep
the email address of the person you talked to and regularly bug them
if the problem persists.


Regards,
Carl-Daniel
-- 
http://www.hailfinger.org/


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Janosch Machowinski]

Carl-Daniel Hailfinger schrieb:
> Alan Cox schrieb:
> 
>>On Mer, 2005-08-31 at 10:52 +0200, Erik Slagter wrote:
>>
>>
>>>Dell is even worse. If you tell them you run Linux on your laptop they
>>>will try to convince you it may damage your hardware and you won't get
>>>any guarantee whatsoever etc. (this in reply to a simple purely hardware
>>>based question)
>>
>>
>>Random Dell techies might. If you've got specific demonstrable BIOS bugs
>>in modern Dell laptops make sure the Dell Linux folks get them but in an
>>easy to reproduce form, or with a fix. If you can get something through
>>to the Dell BIOS people my experience so far is that it actually gets
>>fixed. Getting something that far into Dell is "interesting"
> 
> 
> For many vendors, contacting some higher-level staff at trade fairs gets
> you better contacts than any other method. Especially if you offer to
> supply a detailed technical description of the problem and tell them
> their engineering will find a solution inside that description. Keep
> the email address of the person you talked to and regularly bug them
> if the problem persists.
> 

What also works is starting an online petition and setting it somehow up 
on slashdot ;-). In this way the battery issue of my M6 got fixed. 
Anyway, if you contact ASUS support you don't get a promise that they 
will fix it, but at least you get some links to patches that work 
arround the problem on linuxside...

Greets
    Janosch


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: Re: ACER Aspire 5000 <- Will these bios bugs ever be fixed?

[Alan Cox]

On Mer, 2005-08-31 at 10:01 +0200, Hans Kristian Rosbach wrote:
> I did contact Acer and ask them to just apply some easy fixes
> for the Ferrari 4005 battery detection. The reply I got was
> very surprising. Basicly she told me they don't want my
> business if I use anything other than windows.

Not atypical. If the machine says it supports ACPI and the ACPI table is
wrong then its more effective with such vendors to report them to your
advertising rules people and trading standards bodies for false claims
about the product. That at least, if enough people do it, gives them a
nuisance they can't just hang up on.

It does vary greatly by both vendor and also by whoever happens to
answer the mail. In fact I've forwarded replies from "support" personnel
in some companies via suitable channels to their management who were
pretty horrified what their own staff were doing.

Alan



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

Re: ACER Aspire 5000

[Andreas Domfors]

[-- Attachment #1: Type: text/plain, Size: 647 bytes --]

Right... The cause of the problem is that the symbol Z007 is never defined. 
It is referenced in a structure ("PBST") that holds the battery state. That 
structure is pretty much overwritten every time the _BST-method is invoked, 
so I *think* you can replace Z007 with 0xFFFFFFFF (which means unknown 
remaining battery capacity and current). The changes are at line 3010 - 3011 
on a decompiled dsdt. The new PBST declaration would look like:
Name (PBST, Package (0x04)
{
0x00, 
0xFFFFFFFF, 
0xFFFFFFFF, 
0x2710
})
However, there were some more errors that surfaced when recompiling, and 
it's getting late...

Regards, Andreas

[-- Attachment #2: Type: text/html, Size: 798 bytes --]

Re: ACER Aspire 5000

[Matt R Hall]

I am happy to report that I believe that the system is working properly
now that the necessary DSDT modifications have been performed. Once I
have fully tested this to ensure there are no remaining issues I will
release my fixed DSDT for the latest BIOS revision 3A26 onto the Linux
ACPI page.

Now, regarding the secondary issue brought up by my thread: how can we
encourage vendors to quit using Microsoft's non-standard inferior ACPI
compiler? I am quite disappointed by this sad state of affairs. It is
very frustrating that every laptop I have ever owned had broken ACPI
support.

Additionally [off-topic a little I think] it's also ridiculous that
Broadcom wireless chips (used in so many laptops) are incompetently
supported by their vendor. They are so incompetent they will not
release decent working reference drivers on their website for any OS,
including XP and XP 64-bit edition. Sadly (or happily depending on
one's angle) many of the devices in my laptop do not support XP 64-bit
at all and Linux support for 64-bit mode is far superior.

I owe you all an e-beer for your great assistance with my problem.

Thanks,
Matt

--- Matt R Hall <mhall-Hv3ogNYU3JfZZajBQzqCxQ@public.gmane.org> wrote:

> I am having some problems with ACPI battery support on an ACER Aspire
> 5000. I am unable to read the battery state, which makes this laptop
> nearly useless. I suspect the DSDT code was missing a variable
> declaration or something and this was not caught by Microsoft's
> compiler, but I'm nowhere near expert with the DSDT programming
> language, so some help would be greatly appreciated.
> 
> Relevant ASCII information is included inline. The /proc/acpi/dsdt
> file
> is attached.
> 
> Please note that I compiled the ACPI support as modules for
> troubleshooting purposes. If this is bad please let me know and I can
> do a static link. BTW, it did not seem to work when compiled
> statically
> either.
> 
> Thanks in advance!
> 
> uname -a output:
> Linux themhalltop 2.6.13 #1 Mon Aug 29 00:52:21 PDT 2005 i686
> GNU/Linux
> 
> 
> 
> 
> dmesg output that occurs reading the /proc/acpi/battery/BAT1/state
> file:
>   psargs-0362: *** Error: Looking up [Z007] in namespace,
> AE_NOT_FOUND
> search_node c142a1a8 start_node c142a1a8 return_node 00000000
>  dswexec-0457 [439] ds_exec_end_op        : [Index]: Could not
> resolve
> operands, AE_NOT_FOUND
>  psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST]
> (Node ddec0ee8), AE_NOT_FOUND
> acpi_battery-0208 [431] acpi_battery_get_statu: Error evaluating _BST
> 
> 
> 
> 
> dmesg output from boot cycle:
> Linux version 2.6.13 (root@themhalltop) (gcc version 4.0.2 20050821
> (prerelease) (Debian 4.0.1-6)) #1 Mon Aug 29 00:52:21 PDT 2005
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
>  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
>  BIOS-e820: 000000001def0000 - 000000001defa000 (ACPI data)
>  BIOS-e820: 000000001defa000 - 000000001df00000 (ACPI NVS)
>  BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
>  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 478MB LOWMEM available.
> found SMP MP-table at 000f7fd0
> On node 0 totalpages: 122608
>   DMA zone: 4096 pages, LIFO batch:1
>   Normal zone: 118512 pages, LIFO batch:31
>   HighMem zone: 0 pages, LIFO batch:1
> DMI present.
> ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7f60
> ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @
> 0x1def61be
> ACPI: FADT (v001 SiS    755F     0x06040000 PTL  0x000f4240) @
> 0x1def9e5f
> ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @
> 0x1def9ed3
> ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @
> 0x1def9f88
> ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @
> 0x1def9fd8
> ACPI: DSDT (v001 PTLTD       755 0x06040000 MSFT 0x0100000e) @
> 0x00000000
> ACPI: PM-Timer IO Port: 0x8008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 15:4 APIC version 16
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ11 used by override.
> Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 20000000 (gap:
> 20000000:dff00000)
> Built 1 zonelists
> Kernel command line: BOOT_IMAGE=linux root=303 ec_burst=0
> ACPI: EC polling mode.
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 32768 bytes)
> Detected 1600.563 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 480092k/490432k available (3827k kernel code, 9780k reserved,
> 1237k data, 180k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay using timer specific routine.. 3201.22 BogoMIPS
> (lpj=1600613)
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000
> 00000000
> 00000001 00000000 00000001
> CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000
> 00000001 00000000 00000001
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010
> 00000001 00000000 00000001
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> mtrr: v2.0 (20020519)
> CPU: AMD Turion(tm) 64 Mobile Technology ML-30 stepping 02
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
>  tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully
> acquired
> Parsing all Control
>
Methods:..................................................................................
> Table [DSDT](id F005) - 496 Objects with 38 Devices 82 Methods 12
> Regions
> Parsing all Control Methods:
> Table [SSDT](id F003) - 3 Objects with 0 Devices 0 Methods 0 Regions
> ACPI Namespace successfully loaded at root c06496a0
> evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode
> successful
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 pin1=2 pin2=-1
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
> PCI: Using configuration type 1
> ACPI: Subsystem revision 20050408
> evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs
> on int 0xB
> evgpeblk-1024 [06] ev_create_gpe_block   : Found 7 Wake, Enabled 0
> Runtime GPEs in this block
> evgpeblk-1016 [06] ev_create_gpe_block   : GPE 10 to 1F [_GPE] 2 regs
> on int 0xB
> evgpeblk-1024 [06] ev_create_gpe_block   : Found 0 Wake, Enabled 0
> Runtime GPEs in this block
> Completing Region/Field/Buffer/Package
>
initialization:.........................................................
>  psargs-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
> search_node c142a1a8 start_node c142a1a8 return_node 00000000
> 
>   nsinit-0316 [06] ns_init_one_object    : Could not execute
> arguments
> for [PBST] (Package), AE_NOT_FOUND
> .........
> Initialized 12/12 Regions 5/5 Fields 26/26 Buffers 23/30 Packages
> (508
> nodes)
> Executing all Device _STA and_INI
> methods:..........................................
> 42 Devices found containing: 42 _STA, 1 _INI methods
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
> Uncovering SIS963 that hid as a SIS503 (compatible=0)
> Enabling SiS 96x SMBus.
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
> Boot video device is 0000:01:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Embedded Controller [EC0] (gpe 25)
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 7 devices
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post
> a
> report
> PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
> PCI: Bridge: 0000:00:01.0
>   IO window: a000-afff
>   MEM window: e2100000-e21fffff
>   PREFETCH window: e8000000-efffffff
> PCI: Bus 2, cardbus bridge: 0000:00:06.0
>   IO window: 00002400-000024ff
>   IO window: 00002800-000028ff
>   PREFETCH window: 20000000-21ffffff
>   MEM window: 22000000-23ffffff
> PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
> pnp: 00:03: ioport range 0x8000-0x807f could not be reserved
> pnp: 00:03: ioport range 0x8080-0x80ff has been reserved
> pnp: 00:03: ioport range 0x8100-0x811f has been reserved
> pnp: 00:03: ioport range 0x4d0-0x4d1 has been reserved
> Simple Boot Flag at 0x38 set to 0x1
> IA-32 Microcode Update Driver: v1.14 <tigran-DTz5qymZ9yRBDgjK7y7TUQ@public.gmane.org>
> NTFS driver 2.1.23 [Flags: R/O].
> SGI XFS with ACLs, no debug enabled
> Initializing Cryptographic API
> Real Time Clock Driver v1.12
> Non-volatile memory driver v1.2
> Software Watchdog Timer: 0.07 initialized. soft_noboot=0
> soft_margin=60
> sec (nowayout= 1)
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected SiS 760 chipset
> agpgart: AGP aperture is 4M @ 0xe0000000
> [drm] Initialized drm 1.0.0 20040925
> Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds,
> margin
> is 60 seconds).
> Hangcheck: Using monotonic_clock().
> PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
> disabled
> acpi_bus-0212 [08] acpi_bus_set_power    : Device is not power
> manageable
> ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
> ACPI: PCI interrupt for device 0000:00:02.6 disabled
> io scheduler noop registered
> io scheduler cfq registered
> pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe-l3A5Bk7waGM@public.gmane.org) and
> petero2-zq6IREYz3ykAvxtiuMwx3w@public.gmane.org
> sis900.c: v1.08.08 Jan. 22 2005
> acpi_bus-0212 [08] acpi_bus_set_power    : Device is not power
> manageable
> ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 169
> 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
> 0000:00:04.0: Using transceiver found at address 13 as default
> eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 169,
> 00:c0:9f:a6:f3:00.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> SIS5513: IDE controller at PCI slot 0000:00:02.5
> ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 185
> SIS5513: chipset revision 0
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>     ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
> Probing IDE interface ide0...
> hda: ST9808210A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 1024KiB
> hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63,
> UDMA(100)
> hda: cache flushes supported
>  hda: hda1 hda2 hda3 hda4
> hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
> Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
> Yenta: ISA IRQ mask 0x06f8, PCI irq 169
> Socket status: 30000020
> acpi_bus-0212 [08] acpi_bus_set_power    : Device is not power
> manageable
> ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
> ehci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 2.0
> Controller
> ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:03.2: irq 193, io mem 0xe2004000
> PCI: cache line size of 64 is not supported by device 0000:00:03.2
> ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec
> 2004
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 6 ports detected
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
> (PCI)
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 201
> ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0
> Controller
> ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:03.0: irq 201, io mem 0xe2002000
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 209
> ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0
> Controller (#2)
> ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:03.1: irq 209, io mem 0xe2003000
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 3 ports detected
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
> mice: PS/2 mouse device common for all mice
> Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28
> 12:20:13 2005 UTC).
> ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
> input: AT Translated Set 2 keyboard on isa0060/serio0
> intel8x0_measure_ac97_clock: measured 50518 usecs
> intel8x0: clocking to 48000
> ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
> ALSA device list:
>   #0: SiS SI7012 with ALC203 at 0x1400, irq 177
>   #1: SiS SI7013 Modem at 0x1000, irq 177
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c059b760(lo)
> IPv6 over IPv4 tunneling driver
> NET: Registered protocol family 17
> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version
> 1.50.3)
> powernow-k8:    0 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
> powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x4 (1450 mV)
> cpu_init done, current fid 0x8, vid 0x4
> Using IPI Shortcut mode
> ACPI wakeup devices: 
> PCI0  LAN MODM USB0 USB1 USB2 USB3 
> ACPI: (supports S0 S3 S4 S5)
> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps:
> 0xa04713/0x4000
> input: SynPS/2 Synaptics TouchPad on isa0060/serio1
> UDF-fs: No VRS found
> XFS mounting filesystem hda3
> Ending clean XFS mount for filesystem: hda3
> VFS: Mounted root (xfs filesystem) readonly.
> Freeing unused kernel memory: 180k freed
> Adding 979924k swap on /dev/hda1.  Priority:-1 extents:1
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on hda2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> ath_hal: module license 'Proprietary' taints kernel.
> ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
> wlan: 0.8.6.0 (EXPERIMENTAL)
> ath_rate_sample: 1.2
> ath_pci: 0.9.6.0 (EXPERIMENTAL)
> PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 169
> Build date: Aug 29 2005
> Debugging version (IEEE80211)
> ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
> 54Mbps
> ath0: H/W encryption support: WEP AES AES_CCM TKIP
> ath0: mac 5.9 phy 4.3 radio 4.6
> ath0: Use hw queue 1 for WME_AC_BE traffic
> ath0: Use hw queue 0 for WME_AC_BK traffic
> ath0: Use hw queue 2 for WME_AC_VI traffic
> ath0: Use hw queue 3 for WME_AC_VO traffic
> ath0: Use hw queue 8 for CAB traffic
> ath0: Use hw queue 9 for beacons
> Debugging version (ATH)
> ath0: Atheros 5212: mem=0x22000000, irq=169
> input: PC Speaker
> eth0: Media Link On 100mbps full-duplex 
> eth0: no IPv6 routers present
> ACPI: AC Adapter [ACAD] (on-line)
> ACPI: Battery Slot [BAT1] (battery present)
> ACPI: Power Button (FF) [PWRF]
> ACPI: Lid Switch [LID]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Sleep Button (CM) [SLPB]
> Using specific hotkey driver
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: Thermal Zone [THRM] (58 C)



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf