From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sinan Kaya Subject: Re: [V4, 1/3] ACPI, PCI, IRQ: assign ISA IRQ directly during early boot stages Date: Mon, 24 Oct 2016 00:17:29 -0400 Message-ID: References: <1476915664-27231-2-git-send-email-okaya@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-pci-owner@vger.kernel.org To: Jonathan Liu Cc: linux-acpi@vger.kernel.org, rjw@rjwysocki.net, Bjorn Helgaas , ravikanth.nalla@hpe.com, linux@rainbow-software.org, timur@codeaurora.org, cov@codeaurora.org, jcm@redhat.com, alex.williamson@redhat.com, linux-pci@vger.kernel.org, Andy Gross , linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, wim@djo.tudelft.nl, Len Brown , linux-kernel@vger.kernel.org List-Id: linux-acpi@vger.kernel.org Thanks, On 10/22/2016 11:48 PM, Jonathan Liu wrote: > This series fixes one or more network adapters not working in Linux > 32-bit x86 guest running inside VirtualBox if I have 4 network > adapters enabled. The following message no longer appears in the > kernel log: > ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off > > Tested-by: Jonathan Liu I'm hoping that you can retest V5 so that Rafael can pull in your tested-by into the commit message. -- Sinan Kaya Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.