From: "Georg C. F. Greve" <greve-mXXj517/zsQ@public.gmane.org>
To: Nathan Bryant <nbryant-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
Cc: ACPI Developers
<acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
"Li,
Shaohua" <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: Re: acpi-20040715: functional regression on ASUS M2N
Date: Fri, 06 Aug 2004 18:54:25 +0200 [thread overview]
Message-ID: <m3u0vgurzy.fsf@reason.gnu-hamburg> (raw)
In-Reply-To: <41138944.3060309-p32f3XyCuykqcZcGjlUOXw@public.gmane.org> (Nathan Bryant's message of "Fri, 06 Aug 2004 09:36:04 -0400")
[-- Attachment #1.1: Type: text/plain, Size: 505 bytes --]
|| On Fri, 06 Aug 2004 09:36:04 -0400
|| Nathan Bryant <nbryant-p32f3XyCuykqcZcGjlUOXw@public.gmane.org> wrote:
nb> The attached patch is good enough. Since the call to restore_ELCR
nb> is crashing you, we comment it out, and log the raw values from
nb> save_ELCR:
Thanks.
Okay, took same 2.6.7, applied patches.
Here is what it said for my machine during resume from suspend to ram:
i8259: saving ELCR: 0xfffffff0 0x0a
nb> By the way, can you send the output of lspci?
Sure, here it is:
[-- Attachment #1.2: lspci-vvv --]
[-- Type: application/octet-stream, Size: 10482 bytes --]
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 1751
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] #09 [a105]
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 175a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 175b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1712
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at dc00 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 1712
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ff980000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d480 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at d800 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 7
Region 4: I/O ports at d880 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1759
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 4
Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff700000-ff7fffff
Prefetchable memory behind bridge: dea00000-deafffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 1758
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 1f800000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 1713
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 6
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e100 [size=64]
Region 2: Memory at 1f800400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at 1f800600 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
Subsystem: Asustek Computer, Inc.: Unknown device 1754
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 6
Region 0: Memory at 1f801000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 1fc00000-1ffff000 (prefetchable)
Memory window 1: 20000000-203ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:01:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
Subsystem: Asustek Computer, Inc.: Unknown device 1754
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 7
Region 0: Memory at 1f802000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:01:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 01) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1757
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 11
Region 0: Memory at ff7ef000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
0000:01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Asustek Computer, Inc.: Unknown device 1045
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at ff7efc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:05.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Subsystem: Intel Corp. MIM2000/Centrino
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at ff7ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
[-- Attachment #1.3: Type: text/plain, Size: 478 bytes --]
If you want to know more about my machine, you can also check out
http://bugzilla.kernel.org/show_bug.cgi?id=1774
which is where I also gave some more info.
If I can help you with anything else, please let me know.
Regards,
Georg
--
Georg C. F. Greve <greve-mXXj517/zsQ@public.gmane.org>
Free Software Foundation Europe (http://fsfeurope.org)
Brave GNU World (http://brave-gnu-world.org)
[-- Attachment #2: Type: application/pgp-signature, Size: 188 bytes --]
next prev parent reply other threads:[~2004-08-06 16:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-05 18:49 acpi-20040715: functional regression on ASUS M2N Nathan Bryant
[not found] ` <4112814C.2070808-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-06 11:21 ` Georg C. F. Greve
[not found] ` <m37jsc3424.fsf-glUV91rXKAHWIjgkaejU9x2eb7JE58TQ@public.gmane.org>
2004-08-06 13:36 ` Nathan Bryant
[not found] ` <41138944.3060309-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-06 16:54 ` Georg C. F. Greve [this message]
[not found] ` <m3u0vgurzy.fsf-glUV91rXKAHWIjgkaejU9x2eb7JE58TQ@public.gmane.org>
2004-08-06 17:07 ` Nathan Bryant
[not found] ` <4113BAD5.1030909-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-06 20:50 ` Georg C. F. Greve
2004-08-31 8:15 ` Georg C. F. Greve
2004-08-06 15:23 ` Matthew Garrett
2004-08-06 15:50 ` Nathan Bryant
2004-08-06 16:38 ` Nate Lawson
2004-08-06 19:32 ` Nathan Bryant
-- strict thread matches above, loose matches on Subject: below --
2004-08-31 8:45 Li, Shaohua
[not found] ` <B44D37711ED29844BEA67908EAF36F03AC6ACF-4yWAQGcml65pB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2004-08-31 13:38 ` Georg C. F. Greve
[not found] ` <m3zn4bbf6x.fsf-eMhNhoSsuh6q92djB/mqZw@public.gmane.org>
2004-09-01 15:16 ` Georg C. F. Greve
2004-08-09 8:10 Li, Shaohua
2004-08-02 16:45 Nathan Bryant
[not found] ` <410E6F9C.2040904-p32f3XyCuykqcZcGjlUOXw@public.gmane.org>
2004-08-04 0:23 ` Georg C. F. Greve
2004-07-27 12:24 Li, Shaohua
[not found] ` <B44D37711ED29844BEA67908EAF36F036BCD7C-4yWAQGcml65pB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2004-07-27 13:42 ` Georg C. F. Greve
2004-07-19 23:31 Georg C. F. Greve
[not found] ` <m3d62rzi9a.fsf-eMhNhoSsuh6q92djB/mqZw@public.gmane.org>
2004-07-20 19:03 ` Matthew Garrett
[not found] ` <1090350197.4828.5.camel-myFlNLNQP+Q@public.gmane.org>
2004-07-21 8:17 ` Georg C. F. Greve
[not found] ` <m3acxthizw.fsf-eMhNhoSsuh6q92djB/mqZw@public.gmane.org>
2004-07-27 11:14 ` Georg C. F. Greve
[not found] ` <m3oem1u2gg.fsf-glUV91rXKAHWIjgkaejU9x2eb7JE58TQ@public.gmane.org>
2004-07-27 11:24 ` Matthew Garrett
[not found] ` <1090927462.4412.26.camel-myFlNLNQP+Q@public.gmane.org>
2004-07-27 13:40 ` Georg C. F. Greve
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3u0vgurzy.fsf@reason.gnu-hamburg \
--to=greve-mxxj517/zsq@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=nbryant-p32f3XyCuykqcZcGjlUOXw@public.gmane.org \
--cc=shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox