From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Kalus Subject: Re: Boot failure on 2.6.0-test4/test5 Date: Mon, 15 Sep 2003 10:18:00 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: References: <20030915021622.GA1138@nubol.int.oskuro.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Return-path: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org On Mon, 15 Sep 2003 04:16:22 +0200, Jordi Mallach wrote: > Hi, > > I just found out that ACPI was the cause for 2.6.0-test4 and test5's > boot failures in my box. If I boot with acpi=off, it manages to boot. If > not, the last message printed is > mice: PS/2 mouse device common for all mice > Hi, I seem to have the same problem: 2.6.0-test3 worked with ACPI well, test4 required pci=noacpi to boot and test5 finally dies if I do not specify acpi=off. The Hardware is a Gericom X5 Notebook with a VIA P4X Chipset. With test6 will it get better or can it even get worse? ;-) Greetings Andre ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf