From mboxrd@z Thu Jan  1 00:00:00 1970
From: helmut djurkin <helmut.djurkin@chello.at>
Subject: Re: unable to route traffic between two networks on Red Hat 6.2
Date: 10 Apr 2002 00:01:03 +0200
Sender: linux-admin-owner@vger.kernel.org
Message-ID: <1018389664.1692.355.camel@igor3>
References: <3CB2F02F.F05435A6@quarterleaf.com>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Return-path: <linux-admin-owner@vger.kernel.org>
In-Reply-To: <3CB2F02F.F05435A6@quarterleaf.com>
List-Id: <linux-admin.vger.kernel.org>
Content-Type: text/plain; charset="us-ascii"
To: Ian Zapczynski <ianz@quarterleaf.com>
Cc: linux-admin@vger.kernel.org

On Tue, 2002-04-09 at 15:44, Ian Zapczynski wrote:
> Hello all.
> 
> I am a Sun administrator needing to get a router set up on Red Hat 6.2.
> I am simply trying to join two private networks, 192.168.0.0 and
> 10.1.1.0.  The router I have configured has eth0 at 10.1.1.100 and eth1
> at 192.168.1.1.  I do not need to be able to route traffic to the
> internet using NAT -- I only need a DHCP server on my 192.168.0.0
> network to give out IP addresses on that network (this works fine) that
> will allow users to access the 10.1.1.0 network.
> 
> On my router, currently I can ping an address on the 10.1.1.0 network,
> but not when I use something like ping -I 192.168.1.1 10.1.1.1 to do
> so.  This should work, right?
> 
> /etc/sysconfig/network looks like:
> 
> NETWORKING=yes
> HOSTNAME=myhost.mydomain
> GATEWAYDEV=eth0
> GATEWAY=10.1.1.1
> FORWARD_IPV4=YES
> 
> /etc/sysconfig/static-routes has:
> 
> eth1 net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1
> eth0 net 10.1.1.0 netmask 255.255.255.0 gw 10.1.1.100

no need to set static-routes. your interface config do these settings in
/etc/sysconf/network-scripts/ifup-routes automatic.

with your settings in static-routes you have double entries in the
output from /sbin/route.

the correct entrys from /sbin/route -n would be somethink like this:
10.1.1.0     0.0.0.0  255.255.255.0   U     0      0        0 eth0
192.168.0.0  0.0.0.0  255.255.0.0     U     0      0        0 eth1
127.0.0.0    0.0.0.0  255.0.0.0       U     0      0        0 lo
0.0.0.0      10.1.1.1 0.0.0.0         UG    0      0        0 eth0

bye,
helmut

-- 
ASCII ribbon campaign ( )
 - against HTML email  X
             & vcards / \