* Re: Problems module autoload in 2.6.x
[not found] ` <1079490472.3400.114.camel@bach>
@ 2004-03-17 19:18 ` Thomas Steudten
2004-03-30 19:39 ` Thomas Steudten
1 sibling, 0 replies; 4+ messages in thread
From: Thomas Steudten @ 2004-03-17 19:18 UTC (permalink / raw)
To: Rusty Russell; +Cc: linux-admin, Kernel Mailing List
Hi
2.6.4 on alpha:
zgrep -i mod /proc/config.gz
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_IDEDISK_MULTI_MODE=y
grep -i floppy /etc/modprobe.conf
alias block-major-2-* floppy
strace -estat,open /sbin/modprobe -v floppy
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/lib/libc.so.6.1", O_RDONLY) = 3
open("/etc/modprobe.conf", O_RDONLY) = 3
open("/lib/modules/2.6.4/modules.dep", O_RDONLY) = 3
open("/proc/modules", O_RDONLY) = 3
open("/lib/modules/2.6.4/kernel/drivers/block/floppy.ko", O_RDONLY) = 3
insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko
=> OK
without module floppy loaded:
mdir a:
Can't open /dev/fd0: No such device or address
No msg in KRB (dmesg) and log from /tmp/modprobe.log
=> FAILED
modprobe -v floppy
insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko
=> OK
mdir a:
=> OK
My questions are:
1. What process name has the "new" kmod? There´s no such process in the
table.
2. What triggers to run the prog given in /proc/sys/kernel/modprobe (
for a missing device)?
Strange: Looks like there is no kmod build or loaded or ..
I should look in detail about this..
>>Kernel 2.6.4:
>>Some modules (floppy, lp, loop..) won´t be autoloaded any more since
>>2.4.21. There´s no block-major aso. request in the kernel-ring buffer.
>>I have /etc/modules.conf and /etc/modprobe.conf with modutils-2.4.21-23.1
>>and depmod -V: module-init-tools 3.0-pre5. How can I track this down?
>>Shouldn't be there a kmod process/ thread in the process list?
>
>
> Check you have CONFIG_KMOD=y. If so, the correct way of debugging
> module problems is something like this:
>
> echo '#! /bin/sh' > /tmp/modprobe
> echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
> echo 'exec /sbin/modprobe "$@"' >> /tmp/modprobe
> chmod a+x /tmp/modprobe
> echo /tmp/modprobe > /proc/sys/kernel/modprobe
>
> Then do something that should cause the module to load: you'll see the
> command which gets called in /tmp/modprobe.log. Then you can add "-v"
> and run it manually, hopefully providing enlightenment.
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Problems module autoload in 2.6.x
[not found] ` <1079490472.3400.114.camel@bach>
2004-03-17 19:18 ` Thomas Steudten
@ 2004-03-30 19:39 ` Thomas Steudten
2004-03-30 23:48 ` Rusty Russell
1 sibling, 1 reply; 4+ messages in thread
From: Thomas Steudten @ 2004-03-30 19:39 UTC (permalink / raw)
To: Rusty Russell; +Cc: linux-admin, Kernel Mailing List
Ok,
What I see:
In 2.4.x the modprobe has option -k [..], which
is set in the request_module() in kmod.c.
Also the string "(autoclean)" is printed for
lsmod, if the module was loaded with the -k
option for modprobe from the kernel.
The string is coded in the module.c in 2.4.x.
In kernel 2.6.x, I use 2.6.4, the option -k to
modprobe is gone. Also the request_module() call
in the kernel source, don´t set this option.
The lsmod or cat /proc/modules don't gives
the string "(autoclean)" any more. But that's
another point, don't know why this is gone..
What I have done to trace this down:
I have add a printk to the request_module()
call, to see what is happen there.
If I call mdir a:, the floppy module
isn´t requested in request_module().
Same problem for modules
- lp
- floppy
- loop
I thought if there's no request_module() call
in the kernel next to this module, the generic
one in
genhd.c for block devices and
static struct kobject *base_probe(dev_t dev, int *part, void *data)
{
printk( KERN_ERR "base_probe: enter %d %d\n",MAJOR(dev), MINOR(dev));
if (request_module("block-major-%d-%d", MAJOR(dev), MINOR(dev)) > 0)
/* Make old-style 2.4 aliases work */
request_module("block-major-%d", MAJOR(dev));
return NULL;
}
misc.c for char devices
static int misc_open(struct inode * inode, struct file * file)
{
int minor = iminor(inode);
struct miscdevice *c;
int err = -ENODEV;
struct file_operations *old_fops, *new_fops = NULL;
down(&misc_sem);
list_for_each_entry(c, &misc_list, list) {
if (c->minor == minor) {
new_fops = fops_get(c->fops);
break;
}
}
if (!new_fops) {
up(&misc_sem);
request_module("char-major-%d-%d", MISC_MAJOR, minor);
But the modules aren't never requested. What is going wrong here?
I just wonder, that nobody but me has this problem.
Another point to the missing autoload feature, is the autoclean support
for modules. Why is this gone?
Please CC: me.
2.6.4 on alpha:
zgrep -i mod /proc/config.gz
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_IDEDISK_MULTI_MODE=y
grep -i floppy /etc/modprobe.conf
alias block-major-2-* floppy
strace -estat,open /sbin/modprobe -v floppy
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/lib/libc.so.6.1", O_RDONLY) = 3
open("/etc/modprobe.conf", O_RDONLY) = 3
open("/lib/modules/2.6.4/modules.dep", O_RDONLY) = 3
open("/proc/modules", O_RDONLY) = 3
open("/lib/modules/2.6.4/kernel/drivers/block/floppy.ko", O_RDONLY) = 3
insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko
=> OK
without module floppy loaded:
mdir a:
Can't open /dev/fd0: No such device or address
No msg in KRB (dmesg) and log from /tmp/modprobe.log
=> FAILED
modprobe -v floppy
insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko
=> OK
mdir a:
=> OK
My questions are:
1. What process name has the "new" kmod? There´s no such process in the
table.
2. What triggers to run the prog given in /proc/sys/kernel/modprobe (
for a missing device)?
Strange: Looks like there is no kmod build or loaded or ..
I should look in detail about this..
>>Kernel 2.6.4:
>>Some modules (floppy, lp, loop..) won´t be autoloaded any more since
>>2.4.21. There´s no block-major aso. request in the kernel-ring buffer.
>>I have /etc/modules.conf and /etc/modprobe.conf with modutils-2.4.21-23.1
>>and depmod -V: module-init-tools 3.0-pre5. How can I track this down?
>>Shouldn't be there a kmod process/ thread in the process list?
>
>
> Check you have CONFIG_KMOD=y. If so, the correct way of debugging
> module problems is something like this:
>
> echo '#! /bin/sh' > /tmp/modprobe
> echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
> echo 'exec /sbin/modprobe "$@"' >> /tmp/modprobe
> chmod a+x /tmp/modprobe
> echo /tmp/modprobe > /proc/sys/kernel/modprobe
>
> Then do something that should cause the module to load: you'll see the
> command which gets called in /tmp/modprobe.log. Then you can add "-v"
> and run it manually, hopefully providing enlightenment.
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread