From mboxrd@z Thu Jan 1 00:00:00 1970 From: James Goodwin Subject: Re: Can I define SCSI device order? Date: Mon, 10 Mar 2003 21:07:15 -0500 Sender: linux-admin-owner@vger.kernel.org Message-ID: <3E6D44D3.6010208@triton.net> References: <5.1.1.6.0.20030310075250.00aedf30@mustang> <1047314534.15524.4.camel@Zebra.vil.ite.mee.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: Paul Furness Cc: linux-admin@vger.kernel.org Doesn't your Adaptec Card have both internal and external connections? If so, you can just plug your HD's onto the Internal connection and the RAID to the port and make sure your termination is at the END's of the chain (not the card). You'll also need to make sure the SCSI ID's of the drives are different (I don't remember which one needs to be higher). Regards, James Paul Furness wrote: >Absolutely. The "internal" controller is an embedded one on the >motherboard. I'm calling it "internal" because it's being used to >control the hard disks which are inside the box. The "external" >controller is a normal, PCI card. I'm calling it "external" here because >it it being used to drive a disk array which is in a different box. > >I don't have any option to change the settings of the motherboard; I can >indeed disable the embedded controller, but that means I'll need to go >and buy another controller. > > > Just once I'd love something important to also be easy. :) > > >On Mon, 2003-03-10 at 15:59, Scott Taylor wrote: > > > >>Internal/External SCSI controllers? Do you mean one is built onto the >>Motherboard? >> >>I think you need to ask your hardware manufacturer this one, it may be as >>simple as a jumper. Personally, if I add PCI controllers to a motherboard >>I usually disable any on-board ones. Better yet, don't buy motherboards >>with on-board SCSI. If you must have two SCSI controllers then make them >>both add-on cards. >> >>Scott. >> >>- >>To unsubscribe from this list: send the line "unsubscribe linux-admin" in >>the body of a message to majordomo@vger.kernel.org >>More majordomo info at http://vger.kernel.org/majordomo-info.html >> >>