From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bruce Ferrell Subject: Re: Linux aic7xxx driver doesn't see my tape drive Date: Sun, 18 Apr 2004 15:23:47 -0700 Sender: linux-admin-owner@vger.kernel.org Message-ID: <4082FFF3.9010207@baywinds.org> References: Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: List-Id: Content-Type: text/plain; charset="iso-8859-1"; format="flowed" To: Keith Morse Cc: "Kevin J. Cummings" , linux-admin Well that's not good! Mine does show up: cdrecord -scanbus Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J=F6rg Schill= ing Linux sg driver version: 3.1.25 Using libscg version 'schily-0.5' scsibus0: 0,0,0 0) 'IBM ' 'DNES-318350W ' 'SAH0' Disk 0,1,0 1) 'IBM ' 'DNES-318350W ' 'SAH0' Disk 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) 'IMATION ' 'CD-R IMR080020 ' '1.07' Removable CD= -ROM 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) 'SEAGATE ' 'SX910800N ' '8514' Disk 1,1,0 101) * 1,2,0 102) 'SEAGATE ' 'SX910800N ' '8514' Disk 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) 'HP ' 'C1533A ' 'A907' Removable Ta= pe 1,7,0 107) * When you boot the system, during the Adaptec startup, there can be, if=20 it's turned on, a Control-A prompt. Does the tape drive show up in the= =20 bios setup screens? Keith Morse wrote: > On Wed, 14 Apr 2004, Kevin J. Cummings wrote: >=20 >=20 >>Well, >> Given that the tape drive is attached to the Adaptec 2940U SCSI=20 >>controller, doesn't st have to eventually send SCSI commands to the=20 >>aic7xxx driver???? >> >> Here are the relevent modules after I: >> >>depmod -ae >>modprobe st >> >> >>>[root@kjc386 root]# lsmod >>>st 29964 0 (unused) >>>ide-scsi 11120 0 >>>sd_mod 13004 2 >>>sr_mod 16888 0 (autoclean) >>>cdrom 31040 0 [sr_mod ide-cd] >>>aic7xxx 130996 1 >>>scsi_mod 102968 6 [st sg sr_mod ide-scsi aic7xxx sd_= mod] >> >>But, there is still no mention of the tape drive in /proc/scsi/scsi, = nor=20 >>when I: >> >>cdrecord --scanbus >> >> >>>Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J=F6rg Schi= lling >>>Linux sg driver version: 3.1.24 >>>Using libscg version 'schily-0.7' >>>scsibus0: >>> 0,0,0 0) * >>> 0,1,0 1) * >>> 0,2,0 2) * >>> 0,3,0 3) * >>> 0,4,0 4) * >>> 0,5,0 5) * >>> 0,6,0 6) 'IBM ' 'DSAS-3360 !a' 'S47Q' Disk >>> 0,7,0 7) * >>>scsibus1: >>> 1,0,0 100) 'CDWRITER' 'IDE5224 ' '001H' Removable = CD-ROM >>> 1,1,0 101) * >>> 1,2,0 102) * >>> 1,3,0 103) * >>> 1,4,0 104) * >>> 1,5,0 105) * >>> 1,6,0 106) * >>> 1,7,0 107) * >> >>mt -f /dev/st0 status >> >> >>>/dev/st0: No such device >=20 >=20 >=20 >=20 > Is this also reflected on the bios output during post on the scsci=20 > controller? Sorry if you already mentioned in a previous, but errant= ly=20 > deleted them. >=20 > - > To unsubscribe from this list: send the line "unsubscribe linux-admin= " in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >=20 - To unsubscribe from this list: send the line "unsubscribe linux-admin" = in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html