Re: Linux aic7xxx driver doesn't see my tape drive

["Kevin J. Cummings" <cummings@kjchome.homeip.net>]

Bruce Ferrell wrote:
> Well that's not good! Mine does show up:
> 
> cdrecord -scanbus
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> Linux sg driver version: 3.1.25
> Using libscg version 'schily-0.5'
> scsibus0:
>         0,0,0     0) 'IBM     ' 'DNES-318350W    ' 'SAH0' Disk
>         0,1,0     1) 'IBM     ' 'DNES-318350W    ' 'SAH0' Disk
>         0,2,0     2) *
>         0,3,0     3) *
>         0,4,0     4) *
>         0,5,0     5) 'IMATION ' 'CD-R IMR080020  ' '1.07' Removable CD-ROM
>         0,6,0     6) *
>         0,7,0     7) *
> scsibus1:
>         1,0,0   100) 'SEAGATE ' 'SX910800N       ' '8514' Disk
>         1,1,0   101) *
>         1,2,0   102) 'SEAGATE ' 'SX910800N       ' '8514' Disk
>         1,3,0   103) *
>         1,4,0   104) *
>         1,5,0   105) *
>         1,6,0   106) 'HP      ' 'C1533A          ' 'A907' Removable Tape
>         1,7,0   107) *
> 
> When you boot the system, during the Adaptec startup, there can be, if 
> it's turned on, a Control-A prompt.  Does the tape drive show up in the 
> bios setup screens?

Yes, it does.  Tape drive is id 3, disk drive is id 6....

-- 
Kevin J. Cummings
kjchome@rcn.com
cummings@kjchome.homeip.net
cummings@kjc386.framingham.ma.us
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html