* strange behavior
@ 2003-06-13 7:37 cuenta de RH
2003-06-13 12:28 ` Scott Taylor
0 siblings, 1 reply; 3+ messages in thread
From: cuenta de RH @ 2003-06-13 7:37 UTC (permalink / raw)
To: linux-admin
hi to all. Im trying to set up an old petium 166 to serve as bridge firewall, i instaled an RedHat 7.3 an 2 ovislink with the 8139too driver it seems work fine in the last two days buy today when i bringup the machine i puts "Too much work at interrupt, status=0x00001" and it stops work neither from the ssh nor the local machine, Any one knows why this bheavior is? thanks in advance
Nacho
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: strange behavior
@ 2003-06-13 9:49 cuenta de RH
0 siblings, 0 replies; 3+ messages in thread
From: cuenta de RH @ 2003-06-13 9:49 UTC (permalink / raw)
To: linux-admin
---------- Mensaje Original -----------
De: Master_PE <my@masterpe.nl>
Fecha: Fri, 13 Jun 2003 11:09:24 +0200
>On Friday 13 June 2003 09:37, cuenta de RH wrote:
>> hi to all. Im trying to set up an old petium 166 to serve as bridge
>> firewall, i instaled an RedHat 7.3 an 2 ovislink with the 8139too driver
>> it seems work fine in the last two days buy today when i bringup the
>> machine i puts "Too much work at interrupt, status=0x00001" and it stops
>> work neither from the ssh nor the local machine, Any one knows why this
>> bheavior is? thanks in advance
>
>
>And when you reboot is it still there?
>
>
that is the strange behavior it only hungs the computer when i make network operations (ping, ssh, wget...)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: strange behavior
2003-06-13 7:37 strange behavior cuenta de RH
@ 2003-06-13 12:28 ` Scott Taylor
0 siblings, 0 replies; 3+ messages in thread
From: Scott Taylor @ 2003-06-13 12:28 UTC (permalink / raw)
To: linux-admin
At 00:37 06/13/03, cuenta de RH wrote:
>hi to all. Im trying to set up an old petium 166 to serve as bridge firewall,
A bridge between what?
> i instaled an RedHat 7.3 an 2 ovislink with the 8139too driver it seems
> work fine in the last two days buy today when i bringup the machine i
> puts "Too much work at interrupt, status=0x00001" and it stops work
> neither from the ssh nor the local machine, Any one knows why this
> bheavior is? thanks in advance
Sounds like a hardware thing, or a bad driver, but if the software worked
previously, then I would suspect a NIC went bad. Try to replace the NIC(s)
with known good ones, or new.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-06-13 12:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-13 7:37 strange behavior cuenta de RH
2003-06-13 12:28 ` Scott Taylor
-- strict thread matches above, loose matches on Subject: below --
2003-06-13 9:49 cuenta de RH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).