From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Taylor <scott@dctchambers.com>
Subject: Re: strange behavior
Date: Fri, 13 Jun 2003 05:28:33 -0700
Sender: linux-admin-owner@vger.kernel.org
Message-ID: <5.1.1.6.0.20030613052325.00aab808@mustang>
References: <200306130937.AA154665218@fondoformacioncentro.com>
Mime-Version: 1.0
Return-path: <linux-admin-owner@vger.kernel.org>
In-Reply-To: <200306130937.AA154665218@fondoformacioncentro.com>
List-Id: <linux-admin.vger.kernel.org>
Content-Type: text/plain; charset="us-ascii"; format="flowed"
Content-Transfer-Encoding: 7bit
To: linux-admin@vger.kernel.org

At 00:37 06/13/03, cuenta de RH wrote:
>hi to all. Im trying to set up an old petium 166 to serve as bridge firewall,

A bridge between what?

>  i instaled an RedHat 7.3 an 2 ovislink with the  8139too driver it seems 
> work fine in the last two days buy today when i bringup the machine i 
> puts "Too much work at interrupt, status=0x00001" and it stops work 
> neither from the ssh nor the local machine, Any one knows why this 
> bheavior is? thanks in advance

Sounds like a hardware thing, or a bad driver, but if the software worked 
previously, then I would suspect a NIC went bad.  Try to replace the NIC(s) 
with known good ones, or new.