From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Adrian C." Subject: Re: SSL Certificate signing problem Date: Mon, 11 Oct 2004 07:35:36 +0200 Sender: linux-admin-owner@vger.kernel.org Message-ID: <60a746890410102235fa2198a@mail.gmail.com> References: <60a74689041009164250458ee2@mail.gmail.com> <4168804A.9020200@kjchome.homeip.net> <60a7468904100917247ae77c18@mail.gmail.com> <41688B47.4080502@kjchome.homeip.net> <60a746890410100055478e79cf@mail.gmail.com> Reply-To: "Adrian C." Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <60a746890410100055478e79cf@mail.gmail.com> List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-admin Problem solved. I have written a looong script ;) On Sun, 10 Oct 2004 10:55:52 +0300, Adrian C. wrote: > One more thing, if i try a load-balancing with ip route will it know > to failover if one of the routes fails? > > > > > On Sat, 09 Oct 2004 21:07:19 -0400, Kevin J. Cummings > wrote: > > Adrian C. wrote: > > > If i assign metric 1 to 1st gway and 2 to 2nd it never falls back from > > > gateway with best metric. Even if it goes down it still sticks to it. > > > Something is terribly wrong. I am running Slackware 10. > > > > I just went back and re-read what "Unix Networking" and "Linux Network > > Administrator's Guide" have to say about Metrics and I'm wrong. > > They apply to Routing daemons (like RIP and gated) and help pick the > > "fastest" gateways (apparently, the metric is supposed to indicate a > > number of "hops" from here to there....) > > > > However, what if, you create a process which does nothing else but check > > the status of interface 1. Set up a default route through interface 1 > > with a default metric (of say "2"). When the interface goes down, have > > the process "bring up" the second route by adding it to the routing > > table with a metric of "1". Now the second interface is the "cheapest". > > Your process should now continue to monitor the state of interface 1, > > and when it comes back up, you need to figure out how to "dismantle" > > the second interface. It could be just as simple as swaping the metrics > > so that interface 1 is now the "fastest" route. > > > > Like I said before, I'm not a networking expert, and I don't understand > > all the dependancies of already open connections over the various > > routes, but it seems like a pretty simple way to do things. OTOH, isn't > > this essentially what RIP and gated would do for you? Inotice that > > Fedora Core 2 has a "routed" package. Perhaps that has replaced > > RIP/gated in todays world (my documentation is 10-14 years old)? > > > > Disclaimer: I don't use RIP or gated (anymore) I have a single default > > interface (cable modem). The last I tried to use RIP/gated, I was on a > > corperate network over a 9600 baud modem, and the "RIP storms" > > eventually consumed the entire bandwidth of the modem rendering the > > connection unusable. > > > > > > > > -- > > Kevin J. Cummings > > kjchome@rcn.com > > cummings@kjchome.homeip.net > > cummings@kjc386.framingham.ma.us > > >