From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: akpm@linux-foundation.org, linux-alpha@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-ia64@vger.kernel.org,
linux-s390@vger.kernel.org, x86@kernel.org, hpa@zytor.com,
heiko.carstens@de.ibm.com, rth@twiddle.net, tony.luck@intel.com,
will.deacon@arm.com
Cc: deller@gmx.de, Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH v2 resend 3/6] s390/extable: use generic search and sort routines
Date: Wed, 27 Jan 2016 11:55:20 +0100 [thread overview]
Message-ID: <1453892123-17973-4-git-send-email-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <1453892123-17973-1-git-send-email-ard.biesheuvel@linaro.org>
Replace the arch specific versions of search_extable() and sort_extable()
with calls to the generic ones, which now support relative exception
tables as well.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/s390/include/asm/uaccess.h | 8 +-
arch/s390/mm/Makefile | 2 +-
arch/s390/mm/extable.c | 85 --------------------
3 files changed, 2 insertions(+), 93 deletions(-)
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 9dd4cc47ddc7..e0900ddf91dd 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -79,18 +79,12 @@ struct exception_table_entry
int insn, fixup;
};
-static inline unsigned long extable_insn(const struct exception_table_entry *x)
-{
- return (unsigned long)&x->insn + x->insn;
-}
-
static inline unsigned long extable_fixup(const struct exception_table_entry *x)
{
return (unsigned long)&x->fixup + x->fixup;
}
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
+#define ARCH_HAS_RELATIVE_EXTABLE
/**
* __copy_from_user: - Copy a block of data from user space, with less checking.
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index 839592ca265c..479550dae80e 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -3,7 +3,7 @@
#
obj-y := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
-obj-y += page-states.o gup.o extable.o pageattr.o mem_detect.o
+obj-y += page-states.o gup.o pageattr.o mem_detect.o
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/s390/mm/extable.c b/arch/s390/mm/extable.c
deleted file mode 100644
index 18c8b819b0aa..000000000000
--- a/arch/s390/mm/extable.c
+++ /dev/null
@@ -1,85 +0,0 @@
-#include <linux/module.h>
-#include <linux/sort.h>
-#include <asm/uaccess.h>
-
-/*
- * Search one exception table for an entry corresponding to the
- * given instruction address, and return the address of the entry,
- * or NULL if none is found.
- * We use a binary search, and thus we assume that the table is
- * already sorted.
- */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
- const struct exception_table_entry *last,
- unsigned long value)
-{
- const struct exception_table_entry *mid;
- unsigned long addr;
-
- while (first <= last) {
- mid = ((last - first) >> 1) + first;
- addr = extable_insn(mid);
- if (addr < value)
- first = mid + 1;
- else if (addr > value)
- last = mid - 1;
- else
- return mid;
- }
- return NULL;
-}
-
-/*
- * The exception table needs to be sorted so that the binary
- * search that we use to find entries in it works properly.
- * This is used both for the kernel exception table and for
- * the exception tables of modules that get loaded.
- *
- */
-static int cmp_ex(const void *a, const void *b)
-{
- const struct exception_table_entry *x = a, *y = b;
-
- /* This compare is only valid after normalization. */
- return x->insn - y->insn;
-}
-
-void sort_extable(struct exception_table_entry *start,
- struct exception_table_entry *finish)
-{
- struct exception_table_entry *p;
- int i;
-
- /* Normalize entries to being relative to the start of the section */
- for (p = start, i = 0; p < finish; p++, i += 8) {
- p->insn += i;
- p->fixup += i + 4;
- }
- sort(start, finish - start, sizeof(*start), cmp_ex, NULL);
- /* Denormalize all entries */
- for (p = start, i = 0; p < finish; p++, i += 8) {
- p->insn -= i;
- p->fixup -= i + 4;
- }
-}
-
-#ifdef CONFIG_MODULES
-/*
- * If the exception table is sorted, any referring to the module init
- * will be at the beginning or the end.
- */
-void trim_init_extable(struct module *m)
-{
- /* Trim the beginning */
- while (m->num_exentries &&
- within_module_init(extable_insn(&m->extable[0]), m)) {
- m->extable++;
- m->num_exentries--;
- }
- /* Trim the end */
- while (m->num_exentries &&
- within_module_init(extable_insn(&m->extable[m->num_exentries-1]), m))
- m->num_exentries--;
-}
-#endif /* CONFIG_MODULES */
--
2.5.0
next prev parent reply other threads:[~2016-01-27 10:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 10:55 [PATCH v2 resend 0/6] generic relative extable support Ard Biesheuvel
2016-01-27 10:55 ` [PATCH v2 resend 1/6] extable: add support for relative extables to search and sort routines Ard Biesheuvel
2016-01-27 10:55 ` [PATCH v2 resend 2/6] alpha/extable: use generic " Ard Biesheuvel
2016-01-27 10:55 ` Ard Biesheuvel [this message]
2016-01-27 10:55 ` [PATCH v2 resend 4/6] x86/extable: " Ard Biesheuvel
2016-01-27 10:55 ` [PATCH v2 resend 5/6] ia64/extable: " Ard Biesheuvel
2016-01-27 10:55 ` [PATCH v2 resend 6/6] arm64: switch to relative exception tables Ard Biesheuvel
2016-01-27 19:35 ` Andrew Morton
2016-01-27 19:39 ` Ard Biesheuvel
2016-01-27 19:46 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453892123-17973-4-git-send-email-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=deller@gmx.de \
--cc=heiko.carstens@de.ibm.com \
--cc=hpa@zytor.com \
--cc=linux-alpha@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=rth@twiddle.net \
--cc=tony.luck@intel.com \
--cc=will.deacon@arm.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).