From mboxrd@z Thu Jan 1 00:00:00 1970 From: Balint Cristian Subject: 2.6.9 on alpha thread. Date: Sun, 31 Oct 2004 22:15:03 +0200 Message-ID: <200410312215.03450.rezso@rdsor.ro> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline Sender: linux-alpha-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: Ivan Kokshaysky Cc: Alexander.Rauth@promotion-ie.de, linux-alpha@vger.kernel.org I follow the core_cia thread on lkml and hit the same problem on my Miata. After patching my kernel with your second cia_core.h patch seems that my kernel too make qlogicisp to not scan the bus, and loop infinit telling: qlogicisp: mbox_command loop timeout #2 This is the last what i see: http://www.spinics.net/lists/kernel/msg310542.html Is there a newer staement ? Please CC-me, i am not on lkml. Here are the logs on my Miata, whatever please ignore "error handling" on qlogicisp, this was normal, and oops was normal too, it worked perfect until 2.6.8. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx CMD646: IDE controller at PCI slot 0000:00:04.0 CMD646: chipset revision 1 CMD646: not 100% native mode: will probe irqs later CMD646: chipset revision 0x01, MultiWord DMA Limited, IRQ workaround enabled ide0: BM-DMA at 0x9080-0x9087, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x9088-0x908f, BIOS settings: hdc:pio, hdd:pio ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice atkbd.c: keyboard reset failed on isa0060/serio1 atkbd.c: keyboard reset failed on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 28Kbytes TCP: Hash tables configured (established 32768 bind 4681) Freeing unused kernel memory: 224k freed Red Hat nash version 4.1.18 starting Mounted /proc filesystem Mounting sysfs SCSI subsystem initialized Loading scsi_mod.ko module Loading sd_mod.ko moERROR: SCSI host `isp1020' has no error handling ERROR: This is not a safe way to run your SCSI host dule Loading qlERROR: The error handling must be added to this driver ogicisp.ko modulfffffc000f89bda8 e fffffc000f8dfea0 fffffffc002258e8 fffffffc00204d18 fffffffc00204d18 fffffc000ff91a40 fffffc0000000000 000000001d244b3c 0000000000000000 000000000000000a fffffffc002364ab 0000000000000000 0000000000000000 fffffc000f89be10 fffffc000f89be10 0000000000000002 000000001d244b3c 0000000000000000 000000000000000a fffffffc002364ab 0000000000000000 0000000000000000 fffffffc001f8090 fffffffc00204d18 Trace: [] sys_init_module+0x354/0x530 [] entSys+0xa4/0xc0 qlogicisp : new isp1020 revision ID (5) qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2 qlogicisp: mbox_command loop timeout #2