From mboxrd@z Thu Jan 1 00:00:00 1970 From: Balint Cristian Subject: 2.6.9-rc2 on alpha hangs at isp1280[1020] load. Date: Tue, 16 Nov 2004 02:00:34 +0200 Message-ID: <200411160200.34943.rezso@rdsor.ro> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline Sender: linux-scsi-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-alpha@vger.kernel.org Cc: linux-scsi@vger.kernel.org Hi ! I am getting this while testing 2.6.10-rc2 on my Miata 500 machine, i really dont know if is a recent cia_core or isp1280 change problem. Any ideas ? Please direct me if i am doing something wrong. Here is the message: 1:1/rezso root=/dev/sda4 video=sisfb:1024x768-16@60 console=ttyS0,9600 aboot> 1 aboot: loading uncompressed rezso... aboot: loading compressed rezso... aboot: zero-filling 1086712 bytes at 0xfffffc0001676800 aboot: starting kernel rezso with arguments root=/dev/sda4 video=sisfb:1024x768-16@60 console=ttyS0,9600 Linux version 2.6.10-rc2 (root@alpha.rdsor.ro) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Tue Nov 16 02:45:00 EET 2004 Booting GENERIC on Miata using machine vector Miata from SRM Major Options: VERBOSE_MCHECK Command line: root=/dev/sda4 video=sisfb:1024x768-16@60 console=ttyS0,9600 memcluster 0, usage 1, start 0, end 236 memcluster 1, usage 0, start 236, end 32767 memcluster 2, usage 1, start 32767, end 32768 freeing pages 236:2048 freeing pages 3010:32767 reserving pages 3010:3011 2048K Bcache detected; load hit latency 27 cycles, load miss latency 121 cycles pci: cia revision 1 (pyxis) Built 1 zonelists Kernel command line: root=/dev/sda4 video=sisfb:1024x768-16@60 console=ttyS0,9600 PID hash table entries: 1024 (order: 10, 32768 bytes) HWRPB cycle frequency bogus. Estimated 499797860 Hz Using epoch = 2000 Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 524288 bytes) Inode-cache hash table entries: 32768 (order: 5, 262144 bytes) Memory: 249616k/262136k available (2801k kernel code, 10336k reserved, 456k data, 648k init) Mount-cache hash table entries: 512 (order: 0, 8192 bytes) NET: Registered protocol family 16 EISA bus registered pci: passed tb register update test pci: passed sg loopback i/o read test pci: passed pte write cache snoop test CIA machine check expected. pci: failed valid tag invalid pte reload test (mcheck; workaround available) CIA machine check expected. pci: passed pci machine check test pci: tbia workaround enabled pci: enabling save/restore of SRM state PCI: Bus 1, bridge: 0000:00:14.0 IO window: 8000-8fff MEM window: 09600000-096fffff PREFETCH window: 09000000-095fffff SCSI subsystem initialized audit: initializing netlink socket (disabled) audit(1100573387.122:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) Initializing Cryptographic API rtc: SRM (post-2000) epoch (2000) detected Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered loop: loaded (max 8 devices) Linux Tulip driver version 1.1.13 (May 11, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. tulip0: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block. tulip0: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block. tulip0: Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip0: MII transceiver #5 config 0000 status 7849 advertising 01e1. eth0: Digital DS21143 Tulip rev 48 at fffffc8809740000, 00:00:F8:75:90:A0, IRQ 24. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx CMD646: IDE controller at PCI slot 0000:00:04.0 CMD646: chipset revision 1 CMD646: not 100% native mode: will probe irqs later CMD646: chipset revision 0x01, MultiWord DMA Limited, IRQ workaround enabled ide0: BM-DMA at 0x9080-0x9087, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x9088-0x908f, BIOS settings: hdc:pio, hdd:pio qla1280: QLA1040 found on PCI bus 1, dev 8 Unable to handle kernel paging request at virtual address 000000000000000c swapper(1): Oops 0 pc = [] ra = [] ps = 0007 Not tainted pc is at cia_decode_mchk+0x18/0x390 ra is at cia_machine_check+0xd4/0xe0 v0 = 0000000000000000 t0 = 0000000000000001 t1 = 0000000000000000 t2 = 0000000000000001 t3 = fffffc00016768b0 t4 = 0000000000000400 t5 = 0000000000000000 t6 = fffffc000160bae8 t7 = fffffc000ffb0000 s0 = 0000000000000660 s1 = fffffc0000006068 s2 = fffffc000ffb3c50 s3 = fffffc000ffb4800 s4 = fffffc00016b85b0 s5 = ffffffffffffffed s6 = 0000000000001c00 a0 = 0000000000000000 a1 = 0000000000000000 a2 = fffffc000ffb3c50 a3 = fffffc000ffb3c50 a4 = 0000000000000000 a5 = 0000000000000000 t8 = 0000000000000000 t9 = 000000005571a184 t10= 0000000000000000 t11= 000000000000000a pv = fffffc0001020320 at = fffffc0001622420 gp = fffffc0001675b00 sp = fffffc000ffb3c10 Trace: [] cia_machine_check+0xd4/0xe0 [] do_entInt+0xd4/0x140 [] ret_from_sys_call+0x0/0x10 [] __raw_readw+0x0/0x40 [] __raw_readw+0x14/0x40 [] pci_device_probe_static+0x7c/0xa0 [] __pci_device_probe+0x34/0x40 [] pci_device_probe+0x44/0x90 [] driver_probe_device+0x4c/0xb0 [] driver_attach+0xb4/0x100 [] bus_add_driver+0xc4/0x190 [] driver_register+0x34/0x50 [] pci_register_driver+0x58/0x70 [] init+0x48/0x190 [] kernel_thread+0x28/0x90 Code: 27bb0065 23bd5b70 23defff0 47ff0400 b53e0008 b75e0000 4821f621 Kernel panic - not syncing: Attempted to kill init! Please CC me I am not on linux-scsi list.