From: "Dialup Jon Norstog" <thursday@allidaho.com>
To: Bob Tracy <rct@gherkin.frus.com>, linux-alpha@vger.kernel.org
Cc: debian-alpha@lists.debian.org
Subject: Re: Does SRM care what IDE optical drive it sees?
Date: Thu, 25 Feb 2010 21:22:14 -0700 [thread overview]
Message-ID: <20100226041316.M99801@allidaho.com> (raw)
In-Reply-To: <20100226040843.GA28184@gherkin.frus.com>
Bob,
I've had several "Miata" machines, from both series. They are indeed
sensitive to what is on the IDE channel. At the same time, if "show config"
prints out the drive, SRM is doing its job. I think the flaw is probably in
the controller chip. In general, what works best on those machines
is the original Toshiba 24X CDrom drive. I've had issues with the Red Hat 7.x
distros, which were supposedly pressed CDs rather than burned. Those, I was
able to install by swapping out the Toshiba for an old Creative 8X drive.
Other times a SCSI CDrom worked best. You could try swapping out for the CDRW
once your install is complete;it will probably work in software.
I'm using an XP1000 now, and it does quite well in SRM with CDRW and even
DVD-R drives.
jn
---------- Original Message -----------
From: Bob Tracy <rct@gherkin.frus.com>
To: linux-alpha@vger.kernel.org
Cc: debian-alpha@lists.debian.org
Sent: Thu, 25 Feb 2010 22:08:44 -0600
Subject: Does SRM care what IDE optical drive it sees?
> Situation: I've got a PWS 433au (Miata) on which I've been trying to
> do a "from scratch" install of Lenny. (See the gory details on
> debian-alpha). To make a long story short, I had reason to try and
> replace the existing CD-ROM drive with a CD-RW burner, and the Alpha
> refused to boot. I couldn't even get the power-up diagnostics to run.
>
> I put the original CD-ROM drive back in the system (and removed the new
> one). Result: everything works correctly.
>
> Is SRM really that picky about the optical drive? Or did I simply
> install a defective drive (not likely, but I'll consider the
> possibility)?
>
> --
> ------------------------------------------------------------------------
> Bob Tracy | "Every normal man must be tempted at times to spit
> rct@frus.com | upon his hands, hoist the black flag, and
> begin | slitting throats." -- H.L. Mencken
> ------------------------------------------------------------------------
> --
> To unsubscribe from this list: send the line "unsubscribe linux-
> alpha" in the body of a message to majordomo@vger.kernel.org More
> majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
------- End of Original Message -------
next prev parent reply other threads:[~2010-02-26 4:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-26 4:08 Does SRM care what IDE optical drive it sees? Bob Tracy
2010-02-26 4:22 ` Dialup Jon Norstog [this message]
2010-02-26 8:41 ` Gianluca Bonetti
2010-02-26 19:36 ` Ivan Jager
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100226041316.M99801@allidaho.com \
--to=thursday@allidaho.com \
--cc=debian-alpha@lists.debian.org \
--cc=linux-alpha@vger.kernel.org \
--cc=rct@gherkin.frus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox