From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Cree Subject: Re: [BUG] 4.14 cannot find configured disks/partitions Date: Sat, 2 Dec 2017 10:16:28 +1300 Message-ID: <20171201211628.omfk6jchxgqc4eof@tower> References: <20171124051010.GA18422@gherkin.frus.com> <20171129054955.GA9467@gherkin.frus.com> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <20171129054955.GA9467@gherkin.frus.com> Sender: linux-alpha-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Bob Tracy Cc: debian-alpha@lists.debian.org, Michael Cree , linux-alpha@vger.kernel.org On Tue, Nov 28, 2017 at 11:49:55PM -0600, Bob Tracy wrote: > On Thu, Nov 23, 2017 at 11:10:10PM -0600, Bob Tracy wrote: > > Perhaps the subject isn't entirely accurate, but that's what seems to be > > the case. After loading the initial ramdisk, the boot process stalls > > (loops indefinitely) with "mdadm" complaining about not being able to scan > > the disks defined in its configuration file, which is bone-stock. What > > makes this particularly infuriating is, I don't have anything configured > > for "mdadm" to worry about, which is what's normally found, i.e., > > nothing of interest. > > > > The 4.13 kernel loads and boots just fine with exactly the same > > up-to-date (unstable/experimental) userspace libraries and utilities. > > > > Bottom line: the 4.14 kernel doesn't seem to detect my SCSI disks for > > some reason. All the recent patches (end of October time frame) for PCI > > on alpha (I *think* mostly having to do with addressing some weird kind > > of libata conflict) didn't make any difference. Just got a chance to try out 4.14 on an Alpha and look like firmware for built-in drivers are being treated differently. I presume you have a qlogic scsi driver. Make sure qlogic/1040.bin (or whatever is appropriate for your scsi driver) is listed under Drivers->Generic Driver Options->Include in-kernel firmware blobs. Cheers Michael.