00:05.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01)
00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
00:08.0 ISA bridge: Contaq Microsystems 82c693
00:08.1 IDE interface: Contaq Microsystems 82c693
00:08.2 IDE interface: Contaq Microsystems 82c693
00:08.3 USB Controller: Contaq Microsystems 82c693
00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
00:05.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01) (prog-if 00 [VGA])
	Subsystem: Diamond Multimedia Systems FIRE GL 1000 PRO
	Flags: bus master, medium devsel, latency 32, IRQ 25
	Memory at 000000000a000000 (32-bit, non-prefetchable) [size=128K]
	Memory at 0000000009000000 (32-bit, non-prefetchable) [size=8M]
	Memory at 0000000009800000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at 000000000a040000 [disabled] [size=64K]

00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
	Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
	Flags: bus master, medium devsel, latency 32, IRQ 26
	I/O ports at 8000 [size=256]
	Memory at 000000000a060000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Expansion ROM at 000000000a050000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1

00:08.0 ISA bridge: Contaq Microsystems 82c693
	Flags: bus master, medium devsel, latency 0

00:08.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [Master])
	Flags: bus master, medium devsel, latency 0
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4 [size=4]
	I/O ports at 8480 [size=16]

00:08.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [])
	Flags: bus master, medium devsel, latency 0
	I/O ports at 0170 [size=8]
	I/O ports at 0374 [size=4]

00:08.3 USB Controller: Contaq Microsystems 82c693 (prog-if 10 [OHCI])
	Flags: bus master, medium devsel, latency 32
	Memory at 000000000a061000 (32-bit, non-prefetchable) [size=4K]

00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
	Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
	Flags: bus master, medium devsel, latency 32, IRQ 24
	I/O ports at 8400 [size=128]
	Memory at 000000000a062000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at 000000000a020000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 1

00:05.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01) (prog-if 00 [VGA])
	Subsystem: Diamond Multimedia Systems FIRE GL 1000 PRO
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (48000ns min, 48000ns max)
	Interrupt: pin A routed to IRQ 25
	Region 0: Memory at 000000000a000000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at 0000000009000000 (32-bit, non-prefetchable) [size=8M]
	Region 2: Memory at 0000000009800000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at 000000000a040000 [disabled] [size=64K]

00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
	Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at 8000 [size=256]
	Region 1: Memory at 000000000a060000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Expansion ROM at 000000000a050000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 ISA bridge: Contaq Microsystems 82c693
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:08.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 0
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=4]
	Region 4: I/O ports at 8480 [size=16]

00:08.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 0
	Region 0: I/O ports at 0170 [size=8]
	Region 1: I/O ports at 0374 [size=4]

00:08.3 USB Controller: Contaq Microsystems 82c693 (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at 000000000a061000 (32-bit, non-prefetchable) [size=4K]

00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
	Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 24
	Region 0: I/O ports at 8400 [size=128]
	Region 1: Memory at 000000000a062000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at 000000000a020000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-