linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: afaerber@suse.de (Andreas Färber)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 3/4] ARM64: dts: meson-gx-p23x-q20x: enable the Bluetooth module
Date: Mon, 16 Jan 2017 01:47:19 +0100	[thread overview]
Message-ID: <042e2824-0772-cf27-ffa5-4c3b2af7c92b@suse.de> (raw)
In-Reply-To: <20170115223255.10350-4-martin.blumenstingl@googlemail.com>

Am 15.01.2017 um 23:32 schrieb Martin Blumenstingl:
> This takes the Bluetooth module out of reset (the reset line is
> connected to GPIOX_17) and enables uart_A which is used to configure the
> module.
> This is identical for all boards which inherit meson-gx-p23x-q20x:
> - GXL S905D P230
> - GXL S905D P231
> - GXM S912 Q200
> - GXM S912 Q201
> 
> To get the HCI interface up one has to install bluez-utils and run:
> hciattach -s115200 /dev/ttyAML1 bcm43xx 2000000 flow -
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> index 7a078bef04cd..7db779048091 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> @@ -48,6 +48,7 @@
>  / {
>  	aliases {
>  		serial0 = &uart_AO;
> +		serial1 = &uart_A;
>  	};
>  
>  	chosen {
> @@ -94,12 +95,21 @@
>  
>  	sdio_pwrseq: sdio-pwrseq {
>  		compatible = "mmc-pwrseq-simple";
> -		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> +		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
> +			      <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
>  		clocks = <&wifi32k>;
>  		clock-names = "ext_clock";
>  	};
>  };
>  
> +/* This is connected to the Bluetooth module of the wifi/BT combo chip: */
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins &uart_a_cts_rts_pins>;

Nit: <&uart_a_pins>, <&uart_a_cts_rts_pins> please, like you've done for
reset-gpios above.

Regards,
Andreas

> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +};
> +
>  /* This UART is brought out to the DB9 connector */
>  &uart_AO {
>  	status = "okay";
> 


-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)

  reply	other threads:[~2017-01-16  0:47 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-15 22:32 [PATCH 0/4] Bluetooth support for GXBB/GXL/GXM based devices Martin Blumenstingl
2017-01-15 22:32 ` [PATCH 1/4] tty: serial: meson: allow baud-rates higher than 115200 Martin Blumenstingl
2017-01-15 22:48   ` Andreas Färber
2017-01-18 21:44   ` Kevin Hilman
2017-01-15 22:32 ` [PATCH 2/4] ARM64: dts: meson-gx: add the serial CTS and RTS pin groups Martin Blumenstingl
2017-01-15 22:50   ` Andreas Färber
2017-01-18 21:52     ` Kevin Hilman
2017-01-15 22:32 ` [PATCH 3/4] ARM64: dts: meson-gx-p23x-q20x: enable the Bluetooth module Martin Blumenstingl
2017-01-16  0:47   ` Andreas Färber [this message]
2017-01-16  9:44     ` Martin Blumenstingl
2017-01-15 22:32 ` [PATCH 4/4] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-15 22:55   ` Andreas Färber
2017-01-18 11:25 ` [PATCH 0/4] Bluetooth support for GXBB/GXL/GXM based devices Martin Blumenstingl
2017-01-18 22:02   ` Kevin Hilman
2017-01-19 13:39     ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=042e2824-0772-cf27-ffa5-4c3b2af7c92b@suse.de \
    --to=afaerber@suse.de \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).