[PATCH v2 0/6] Add support for AmLogic GXBB clock controller

[PATCH v2 0/6] Add support for AmLogic GXBB clock controller

[Michael Turquette]

This series is based on the AmLogic Meson8b rewrite/cleanup[0]. The
AmLogic GXBB is an ARMv8-based SoC, fed by a 24MHZ xtal, and it provides
several PLLs, muxes dividers and gates to drive CPUs and peripherals.

The main change from v1[1] is that I have moved all of the arch/arm64
changes to a separate patch series to be picked up by the amlogic
maintainers. This series will go through the clk tree and everyone will
meet up and be friends in linux-next, as usual. Additionally the last
patch includes a fix to set the CLK_IS_CRITICAL flag for clk81,
suggested by Kevin Hilman.

A stable, immutable branch based on -rc1 with this series is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-s905

While based on the Meson8b clock controller driver, this series adds
supports for Multi-phase Locked Loops (mpll) and support for PLLs with
fractional rates.

This series introduces support for the new clock types and the clock controller
platform_driver. I'm not sure about the names for the gate clocks, and
suggestions/patches are welcome.

Notably missing from this driver are the branch clocks (e.g. the mess of
muxes and dividers that come after the PLLs and MPLLs). I could have
guessed how things were wired up from the resources available to me, but
I'm hoping to get some improved documentation soon and then I'll go back
and fill them in.

[0] http://lkml.kernel.org/g/1465518467-23939-1-git-send-email-mturquette at baylibre.com
[1] Link: 1465518774-26924-1-git-send-email-mturquette at baylibre.com

Michael Turquette (6):
  clk: meson: only build selected platforms
  clk: meson: add peripheral gate macro
  clk: meson: add mpll support
  clk: meson: fractional pll support
  clk: gxbb: Document bindings for the GXBB clock controller
  clk: gxbb: add AmLogic GXBB clk controller driver

 .../bindings/clock/amlogic,gxbb-clkc.txt           |  36 +
 drivers/clk/Kconfig                                |   1 +
 drivers/clk/Makefile                               |   2 +-
 drivers/clk/meson/Kconfig                          |  19 +
 drivers/clk/meson/Makefile                         |   5 +-
 drivers/clk/meson/clk-mpll.c                       |  94 ++
 drivers/clk/meson/clk-pll.c                        |  32 +-
 drivers/clk/meson/clkc.h                           |  39 +
 drivers/clk/meson/gxbb.c                           | 954 +++++++++++++++++++++
 drivers/clk/meson/gxbb.h                           | 271 ++++++
 include/dt-bindings/clock/gxbb-clkc.h              |  12 +
 11 files changed, 1460 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
 create mode 100644 drivers/clk/meson/Kconfig
 create mode 100644 drivers/clk/meson/clk-mpll.c
 create mode 100644 drivers/clk/meson/gxbb.c
 create mode 100644 drivers/clk/meson/gxbb.h
 create mode 100644 include/dt-bindings/clock/gxbb-clkc.h

-- 
2.1.4

[PATCH v2 1/6] clk: meson: only build selected platforms

[Michael Turquette]

Break the AmLogic clock code up so that only the necessary parts are
compiled and linked. The core code is selected by both arm and arm64
builds with COMMON_CLK_AMLOGIC. The individual drivers have their own
config options as well.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
---
No change in v2.

 drivers/clk/Kconfig        |  1 +
 drivers/clk/Makefile       |  2 +-
 drivers/clk/meson/Kconfig  | 12 ++++++++++++
 drivers/clk/meson/Makefile |  4 ++--
 4 files changed, 16 insertions(+), 3 deletions(-)
 create mode 100644 drivers/clk/meson/Kconfig

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 53ddba26578c..30feb6b40305 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -208,6 +208,7 @@ config COMMON_CLK_OXNAS
 
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/meson/Kconfig"
 source "drivers/clk/mvebu/Kconfig"
 source "drivers/clk/qcom/Kconfig"
 source "drivers/clk/renesas/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index dcc5e698ff6d..af03eb2f6c05 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -65,7 +65,7 @@ ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)			+= mmp/
 endif
 obj-y					+= mvebu/
-obj-$(CONFIG_ARCH_MESON)		+= meson/
+obj-$(CONFIG_COMMON_CLK_AMLOGIC)	+= meson/
 obj-$(CONFIG_ARCH_MXS)			+= mxs/
 obj-$(CONFIG_MACH_PISTACHIO)		+= pistachio/
 obj-$(CONFIG_COMMON_CLK_NXP)		+= nxp/
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
new file mode 100644
index 000000000000..7bb19ad7369e
--- /dev/null
+++ b/drivers/clk/meson/Kconfig
@@ -0,0 +1,12 @@
+config COMMON_CLK_AMLOGIC
+	bool
+	depends on OF
+	depends on ARCH_MESON || COMPILE_TEST
+
+config COMMON_CLK_MESON8B
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	help
+	  Support for the clock controller on AmLogic S805 devices, aka
+	  meson8b. Say Y if you want peripherals and CPU frequency scaling to
+	  work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 901b5d435812..b3d60fecd846 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -2,5 +2,5 @@
 # Makefile for Meson specific clk
 #
 
-obj-y += clk-pll.o clk-cpu.o
-obj-y += meson8b-clkc.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o
+obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b-clkc.o
-- 
2.1.4

[PATCH v2 2/6] clk: meson: add peripheral gate macro

[Michael Turquette]

There are a series of peripheral and system gate clocks that fan out
from the clk81 signal. Add a helper macro to statically initialize these
gate clocks.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
---
No change in v2.

 drivers/clk/meson/clkc.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index f3f396168ba4..9436932880c0 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -73,6 +73,20 @@ struct meson_clk_cpu {
 int meson_clk_cpu_notifier_cb(struct notifier_block *nb, unsigned long event,
 		void *data);
 
+#define MESON_GATE(_name, _reg, _bit)					\
+struct clk_gate gxbb_##_name = { 						\
+	.reg = (void __iomem *) _reg, 					\
+	.bit_idx = (_bit), 						\
+	.lock = &clk_lock,						\
+	.hw.init = &(struct clk_init_data) { 				\
+		.name = #_name,					\
+		.ops = &clk_gate_ops,					\
+		.parent_names = (const char *[]){ "clk81" },		\
+		.num_parents = 1,					\
+		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED), 	\
+	},								\
+};
+
 /* clk_ops */
 extern const struct clk_ops meson_clk_pll_ro_ops;
 extern const struct clk_ops meson_clk_pll_ops;
-- 
2.1.4

[PATCH v2 3/6] clk: meson: add mpll support

[Michael Turquette]

MPLLs are adjustable rate clocks derived from PLLs. On both Meson8b and
GXBB they appear to be only derived from fixed_pll.

Add support for these clock types so that they can be added to their
respective drivers.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
---
No change in v2.

 drivers/clk/meson/Makefile   |  2 +-
 drivers/clk/meson/clk-mpll.c | 94 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/clkc.h     | 10 +++++
 3 files changed, 105 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/meson/clk-mpll.c

diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b3d60fecd846..7667218b5e46 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -2,5 +2,5 @@
 # Makefile for Meson specific clk
 #
 
-obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b-clkc.o
diff --git a/drivers/clk/meson/clk-mpll.c b/drivers/clk/meson/clk-mpll.c
new file mode 100644
index 000000000000..03af79005ddb
--- /dev/null
+++ b/drivers/clk/meson/clk-mpll.c
@@ -0,0 +1,94 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * MultiPhase Locked Loops are outputs from a PLL with additional frequency
+ * scaling capabilities. MPLL rates are calculated as:
+ *
+ * f(N2_integer, SDM_IN ) = 2.0G/(N2_integer + SDM_IN/16384)
+ */
+
+#include <linux/clk-provider.h>
+#include "clkc.h"
+
+#define SDM_MAX 16384
+
+#define to_meson_clk_mpll(_hw) container_of(_hw, struct meson_clk_mpll, hw)
+
+static unsigned long mpll_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct meson_clk_mpll *mpll = to_meson_clk_mpll(hw);
+	struct parm *p;
+	unsigned long rate = 0;
+	unsigned long reg, sdm, n2;
+
+	p = &mpll->sdm;
+	reg = readl(mpll->base + p->reg_off);
+	sdm = PARM_GET(p->width, p->shift, reg);
+
+	p = &mpll->n2;
+	reg = readl(mpll->base + p->reg_off);
+	n2 = PARM_GET(p->width, p->shift, reg);
+
+	rate = (parent_rate * SDM_MAX) / ((SDM_MAX * n2) + sdm);
+
+	return rate;
+}
+
+const struct clk_ops meson_clk_mpll_ro_ops = {
+	.recalc_rate = mpll_recalc_rate,
+};
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 9436932880c0..73f014691240 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -73,6 +73,15 @@ struct meson_clk_cpu {
 int meson_clk_cpu_notifier_cb(struct notifier_block *nb, unsigned long event,
 		void *data);
 
+struct meson_clk_mpll {
+	struct clk_hw hw;
+	void __iomem *base;
+	struct parm sdm;
+	struct parm n2;
+	/* FIXME ssen gate control? */
+	spinlock_t *lock;
+};
+
 #define MESON_GATE(_name, _reg, _bit)					\
 struct clk_gate gxbb_##_name = { 						\
 	.reg = (void __iomem *) _reg, 					\
@@ -91,5 +100,6 @@ struct clk_gate gxbb_##_name = { 						\
 extern const struct clk_ops meson_clk_pll_ro_ops;
 extern const struct clk_ops meson_clk_pll_ops;
 extern const struct clk_ops meson_clk_cpu_ops;
+extern const struct clk_ops meson_clk_mpll_ro_ops;
 
 #endif /* __CLKC_H */
-- 
2.1.4

[PATCH v2 4/6] clk: meson: fractional pll support

[Michael Turquette]

Fractional MPLLs are a superset of the existing AmLogic MPLLs. They add
in a couple of new bitfields for further dividing the clock rate to
achieve rates with fractional hertz.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
---
No change in v2.

 drivers/clk/meson/clk-pll.c | 32 ++++++++++++++++++++++++++++++--
 drivers/clk/meson/clkc.h    | 15 +++++++++++++++
 2 files changed, 45 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 60c6b94fe9b1..4adc1e89212c 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -53,7 +53,7 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
 	struct parm *p;
 	unsigned long parent_rate_mhz = parent_rate / 1000000;
 	unsigned long rate_mhz;
-	u16 n, m, od;
+	u16 n, m, frac = 0, od, od2 = 0;
 	u32 reg;
 
 	p = &pll->n;
@@ -68,7 +68,21 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
 	reg = readl(pll->base + p->reg_off);
 	od = PARM_GET(p->width, p->shift, reg);
 
-	rate_mhz = (parent_rate_mhz * m / n) >> od;
+	p = &pll->od2;
+	if (p->width) {
+		reg = readl(pll->base + p->reg_off);
+		od2 = PARM_GET(p->width, p->shift, reg);
+	}
+
+	p = &pll->frac;
+	if (p->width) {
+		reg = readl(pll->base + p->reg_off);
+		frac = PARM_GET(p->width, p->shift, reg);
+		rate_mhz = (parent_rate_mhz * m + \
+				(parent_rate_mhz * frac >> 12)) * 2 / n;
+		rate_mhz = rate_mhz >> od >> od2;
+	} else
+		rate_mhz = (parent_rate_mhz * m / n) >> od >> od2;
 
 	return rate_mhz * 1000000;
 }
@@ -155,6 +169,20 @@ static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	reg = PARM_SET(p->width, p->shift, reg, rate_set->od);
 	writel(reg, pll->base + p->reg_off);
 
+	p = &pll->od2;
+	if (p->width) {
+		reg = readl(pll->base + p->reg_off);
+		reg = PARM_SET(p->width, p->shift, reg, rate_set->od2);
+		writel(reg, pll->base + p->reg_off);
+	}
+
+	p = &pll->frac;
+	if (p->width) {
+		reg = readl(pll->base + p->reg_off);
+		reg = PARM_SET(p->width, p->shift, reg, rate_set->frac);
+		writel(reg, pll->base + p->reg_off);
+	}
+
 	p = &pll->n;
 	ret = meson_clk_pll_wait_lock(pll, p);
 	if (ret) {
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 73f014691240..53326c32e853 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -40,7 +40,10 @@ struct pll_rate_table {
 	u16		m;
 	u16		n;
 	u16		od;
+	u16		od2;
+	u16		frac;
 };
+
 #define PLL_RATE(_r, _m, _n, _od)					\
 	{								\
 		.rate		= (_r),					\
@@ -49,12 +52,24 @@ struct pll_rate_table {
 		.od		= (_od),				\
 	}								\
 
+#define PLL_FRAC_RATE(_r, _m, _n, _od, _od2, _frac)			\
+	{								\
+		.rate		= (_r),					\
+		.m		= (_m),					\
+		.n		= (_n),					\
+		.od		= (_od),				\
+		.od2		= (_od2),				\
+		.frac		= (_frac),				\
+	}								\
+
 struct meson_clk_pll {
 	struct clk_hw hw;
 	void __iomem *base;
 	struct parm m;
 	struct parm n;
+	struct parm frac;
 	struct parm od;
+	struct parm od2;
 	const struct pll_rate_table *rate_table;
 	unsigned int rate_count;
 	spinlock_t *lock;
-- 
2.1.4

[PATCH v2 5/6] clk: gxbb: Document bindings for the GXBB clock controller

[Michael Turquette]

Add documentations for the clock controller.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
---
No change in v2.

 .../bindings/clock/amlogic,gxbb-clkc.txt           | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
new file mode 100644
index 000000000000..ce06435d28ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -0,0 +1,36 @@
+* Amlogic GXBB Clock and Reset Unit
+
+The Amlogic GXBB clock controller generates and supplies clock to various
+controllers within the SoC.
+
+Required Properties:
+
+- compatible: should be "amlogic,gxbb-clkc"
+- reg: physical base address of the clock controller and length of memory
+       mapped region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
+used in device tree sources.
+
+Example: Clock controller node:
+
+	clkc: clock-controller at c883c000 {
+		#clock-cells = <1>;
+		compatible = "amlogic,gxbb-clkc";
+		reg = <0x0 0xc883c000 0x0 0x3db>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart_AO: serial at c81004c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0xc81004c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc CLKID_CLK81>;
+		status = "disabled";
+	};
-- 
2.1.4

[PATCH v2 6/6] clk: gxbb: add AmLogic GXBB clk controller driver

[Michael Turquette]

The gxbb clock controller is the primary clock generation unit for the
AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several
PLLs and the usual post-dividers, muxes, dividers and leaf gates that
are fed into various IP blocks in the SoC.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
---
Changed in v2:
* clk81 sets the CLK_IS_CRITICAL flag

 drivers/clk/meson/Kconfig             |   7 +
 drivers/clk/meson/Makefile            |   1 +
 drivers/clk/meson/gxbb.c              | 954 ++++++++++++++++++++++++++++++++++
 drivers/clk/meson/gxbb.h              | 271 ++++++++++
 include/dt-bindings/clock/gxbb-clkc.h |  12 +
 5 files changed, 1245 insertions(+)
 create mode 100644 drivers/clk/meson/gxbb.c
 create mode 100644 drivers/clk/meson/gxbb.h
 create mode 100644 include/dt-bindings/clock/gxbb-clkc.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 7bb19ad7369e..19480bcc7046 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -10,3 +10,10 @@ config COMMON_CLK_MESON8B
 	  Support for the clock controller on AmLogic S805 devices, aka
 	  meson8b. Say Y if you want peripherals and CPU frequency scaling to
 	  work.
+
+config COMMON_CLK_GXBB
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	help
+	  Support for the clock controller on AmLogic S905 devices, aka gxbb.
+	  Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 7667218b5e46..197e40175166 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b-clkc.o
+obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
new file mode 100644
index 000000000000..007b7157cf4b
--- /dev/null
+++ b/drivers/clk/meson/gxbb.c
@@ -0,0 +1,954 @@
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Michael Turquette <mturquette@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+
+#include "clkc.h"
+#include "gxbb.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+	PLL_RATE(24000000, 56, 1, 2),
+	PLL_RATE(48000000, 64, 1, 2),
+	PLL_RATE(72000000, 72, 1, 2),
+	PLL_RATE(96000000, 64, 1, 2),
+	PLL_RATE(120000000, 80, 1, 2),
+	PLL_RATE(144000000, 96, 1, 2),
+	PLL_RATE(168000000, 56, 1, 1),
+	PLL_RATE(192000000, 64, 1, 1),
+	PLL_RATE(216000000, 72, 1, 1),
+	PLL_RATE(240000000, 80, 1, 1),
+	PLL_RATE(264000000, 88, 1, 1),
+	PLL_RATE(288000000, 96, 1, 1),
+	PLL_RATE(312000000, 52, 1, 2),
+	PLL_RATE(336000000, 56, 1, 2),
+	PLL_RATE(360000000, 60, 1, 2),
+	PLL_RATE(384000000, 64, 1, 2),
+	PLL_RATE(408000000, 68, 1, 2),
+	PLL_RATE(432000000, 72, 1, 2),
+	PLL_RATE(456000000, 76, 1, 2),
+	PLL_RATE(480000000, 80, 1, 2),
+	PLL_RATE(504000000, 84, 1, 2),
+	PLL_RATE(528000000, 88, 1, 2),
+	PLL_RATE(552000000, 92, 1, 2),
+	PLL_RATE(576000000, 96, 1, 2),
+	PLL_RATE(600000000, 50, 1, 1),
+	PLL_RATE(624000000, 52, 1, 1),
+	PLL_RATE(648000000, 54, 1, 1),
+	PLL_RATE(672000000, 56, 1, 1),
+	PLL_RATE(696000000, 58, 1, 1),
+	PLL_RATE(720000000, 60, 1, 1),
+	PLL_RATE(744000000, 62, 1, 1),
+	PLL_RATE(768000000, 64, 1, 1),
+	PLL_RATE(792000000, 66, 1, 1),
+	PLL_RATE(816000000, 68, 1, 1),
+	PLL_RATE(840000000, 70, 1, 1),
+	PLL_RATE(864000000, 72, 1, 1),
+	PLL_RATE(888000000, 74, 1, 1),
+	PLL_RATE(912000000, 76, 1, 1),
+	PLL_RATE(936000000, 78, 1, 1),
+	PLL_RATE(960000000, 80, 1, 1),
+	PLL_RATE(984000000, 82, 1, 1),
+	PLL_RATE(1008000000, 84, 1, 1),
+	PLL_RATE(1032000000, 86, 1, 1),
+	PLL_RATE(1056000000, 88, 1, 1),
+	PLL_RATE(1080000000, 90, 1, 1),
+	PLL_RATE(1104000000, 92, 1, 1),
+	PLL_RATE(1128000000, 94, 1, 1),
+	PLL_RATE(1152000000, 96, 1, 1),
+	PLL_RATE(1176000000, 98, 1, 1),
+	PLL_RATE(1200000000, 50, 1, 0),
+	PLL_RATE(1224000000, 51, 1, 0),
+	PLL_RATE(1248000000, 52, 1, 0),
+	PLL_RATE(1272000000, 53, 1, 0),
+	PLL_RATE(1296000000, 54, 1, 0),
+	PLL_RATE(1320000000, 55, 1, 0),
+	PLL_RATE(1344000000, 56, 1, 0),
+	PLL_RATE(1368000000, 57, 1, 0),
+	PLL_RATE(1392000000, 58, 1, 0),
+	PLL_RATE(1416000000, 59, 1, 0),
+	PLL_RATE(1440000000, 60, 1, 0),
+	PLL_RATE(1464000000, 61, 1, 0),
+	PLL_RATE(1488000000, 62, 1, 0),
+	PLL_RATE(1512000000, 63, 1, 0),
+	PLL_RATE(1536000000, 64, 1, 0),
+	PLL_RATE(1560000000, 65, 1, 0),
+	PLL_RATE(1584000000, 66, 1, 0),
+	PLL_RATE(1608000000, 67, 1, 0),
+	PLL_RATE(1632000000, 68, 1, 0),
+	PLL_RATE(1656000000, 68, 1, 0),
+	PLL_RATE(1680000000, 68, 1, 0),
+	PLL_RATE(1704000000, 68, 1, 0),
+	PLL_RATE(1728000000, 69, 1, 0),
+	PLL_RATE(1752000000, 69, 1, 0),
+	PLL_RATE(1776000000, 69, 1, 0),
+	PLL_RATE(1800000000, 69, 1, 0),
+	PLL_RATE(1824000000, 70, 1, 0),
+	PLL_RATE(1848000000, 70, 1, 0),
+	PLL_RATE(1872000000, 70, 1, 0),
+	PLL_RATE(1896000000, 70, 1, 0),
+	PLL_RATE(1920000000, 71, 1, 0),
+	PLL_RATE(1944000000, 71, 1, 0),
+	PLL_RATE(1968000000, 71, 1, 0),
+	PLL_RATE(1992000000, 71, 1, 0),
+	PLL_RATE(2016000000, 72, 1, 0),
+	PLL_RATE(2040000000, 72, 1, 0),
+	PLL_RATE(2064000000, 72, 1, 0),
+	PLL_RATE(2088000000, 72, 1, 0),
+	PLL_RATE(2112000000, 73, 1, 0),
+	{ /* sentinel */ },
+};
+
+static const struct pll_rate_table gp0_pll_rate_table[] = {
+	PLL_RATE(96000000, 32, 1, 3),
+	PLL_RATE(99000000, 33, 1, 3),
+	PLL_RATE(102000000, 34, 1, 3),
+	PLL_RATE(105000000, 35, 1, 3),
+	PLL_RATE(108000000, 36, 1, 3),
+	PLL_RATE(111000000, 37, 1, 3),
+	PLL_RATE(114000000, 38, 1, 3),
+	PLL_RATE(117000000, 39, 1, 3),
+	PLL_RATE(120000000, 40, 1, 3),
+	PLL_RATE(123000000, 41, 1, 3),
+	PLL_RATE(126000000, 42, 1, 3),
+	PLL_RATE(129000000, 43, 1, 3),
+	PLL_RATE(132000000, 44, 1, 3),
+	PLL_RATE(135000000, 45, 1, 3),
+	PLL_RATE(138000000, 46, 1, 3),
+	PLL_RATE(141000000, 47, 1, 3),
+	PLL_RATE(144000000, 48, 1, 3),
+	PLL_RATE(147000000, 49, 1, 3),
+	PLL_RATE(150000000, 50, 1, 3),
+	PLL_RATE(153000000, 51, 1, 3),
+	PLL_RATE(156000000, 52, 1, 3),
+	PLL_RATE(159000000, 53, 1, 3),
+	PLL_RATE(162000000, 54, 1, 3),
+	PLL_RATE(165000000, 55, 1, 3),
+	PLL_RATE(168000000, 56, 1, 3),
+	PLL_RATE(171000000, 57, 1, 3),
+	PLL_RATE(174000000, 58, 1, 3),
+	PLL_RATE(177000000, 59, 1, 3),
+	PLL_RATE(180000000, 60, 1, 3),
+	PLL_RATE(183000000, 61, 1, 3),
+	PLL_RATE(186000000, 62, 1, 3),
+	PLL_RATE(192000000, 32, 1, 2),
+	PLL_RATE(198000000, 33, 1, 2),
+	PLL_RATE(204000000, 34, 1, 2),
+	PLL_RATE(210000000, 35, 1, 2),
+	PLL_RATE(216000000, 36, 1, 2),
+	PLL_RATE(222000000, 37, 1, 2),
+	PLL_RATE(228000000, 38, 1, 2),
+	PLL_RATE(234000000, 39, 1, 2),
+	PLL_RATE(240000000, 40, 1, 2),
+	PLL_RATE(246000000, 41, 1, 2),
+	PLL_RATE(252000000, 42, 1, 2),
+	PLL_RATE(258000000, 43, 1, 2),
+	PLL_RATE(264000000, 44, 1, 2),
+	PLL_RATE(270000000, 45, 1, 2),
+	PLL_RATE(276000000, 46, 1, 2),
+	PLL_RATE(282000000, 47, 1, 2),
+	PLL_RATE(288000000, 48, 1, 2),
+	PLL_RATE(294000000, 49, 1, 2),
+	PLL_RATE(300000000, 50, 1, 2),
+	PLL_RATE(306000000, 51, 1, 2),
+	PLL_RATE(312000000, 52, 1, 2),
+	PLL_RATE(318000000, 53, 1, 2),
+	PLL_RATE(324000000, 54, 1, 2),
+	PLL_RATE(330000000, 55, 1, 2),
+	PLL_RATE(336000000, 56, 1, 2),
+	PLL_RATE(342000000, 57, 1, 2),
+	PLL_RATE(348000000, 58, 1, 2),
+	PLL_RATE(354000000, 59, 1, 2),
+	PLL_RATE(360000000, 60, 1, 2),
+	PLL_RATE(366000000, 61, 1, 2),
+	PLL_RATE(372000000, 62, 1, 2),
+	PLL_RATE(384000000, 32, 1, 1),
+	PLL_RATE(396000000, 33, 1, 1),
+	PLL_RATE(408000000, 34, 1, 1),
+	PLL_RATE(420000000, 35, 1, 1),
+	PLL_RATE(432000000, 36, 1, 1),
+	PLL_RATE(444000000, 37, 1, 1),
+	PLL_RATE(456000000, 38, 1, 1),
+	PLL_RATE(468000000, 39, 1, 1),
+	PLL_RATE(480000000, 40, 1, 1),
+	PLL_RATE(492000000, 41, 1, 1),
+	PLL_RATE(504000000, 42, 1, 1),
+	PLL_RATE(516000000, 43, 1, 1),
+	PLL_RATE(528000000, 44, 1, 1),
+	PLL_RATE(540000000, 45, 1, 1),
+	PLL_RATE(552000000, 46, 1, 1),
+	PLL_RATE(564000000, 47, 1, 1),
+	PLL_RATE(576000000, 48, 1, 1),
+	PLL_RATE(588000000, 49, 1, 1),
+	PLL_RATE(600000000, 50, 1, 1),
+	PLL_RATE(612000000, 51, 1, 1),
+	PLL_RATE(624000000, 52, 1, 1),
+	PLL_RATE(636000000, 53, 1, 1),
+	PLL_RATE(648000000, 54, 1, 1),
+	PLL_RATE(660000000, 55, 1, 1),
+	PLL_RATE(672000000, 56, 1, 1),
+	PLL_RATE(684000000, 57, 1, 1),
+	PLL_RATE(696000000, 58, 1, 1),
+	PLL_RATE(708000000, 59, 1, 1),
+	PLL_RATE(720000000, 60, 1, 1),
+	PLL_RATE(732000000, 61, 1, 1),
+	PLL_RATE(744000000, 62, 1, 1),
+	PLL_RATE(768000000, 32, 1, 0),
+	PLL_RATE(792000000, 33, 1, 0),
+	PLL_RATE(816000000, 34, 1, 0),
+	PLL_RATE(840000000, 35, 1, 0),
+	PLL_RATE(864000000, 36, 1, 0),
+	PLL_RATE(888000000, 37, 1, 0),
+	PLL_RATE(912000000, 38, 1, 0),
+	PLL_RATE(936000000, 39, 1, 0),
+	PLL_RATE(960000000, 40, 1, 0),
+	PLL_RATE(984000000, 41, 1, 0),
+	PLL_RATE(1008000000, 42, 1, 0),
+	PLL_RATE(1032000000, 43, 1, 0),
+	PLL_RATE(1056000000, 44, 1, 0),
+	PLL_RATE(1080000000, 45, 1, 0),
+	PLL_RATE(1104000000, 46, 1, 0),
+	PLL_RATE(1128000000, 47, 1, 0),
+	PLL_RATE(1152000000, 48, 1, 0),
+	PLL_RATE(1176000000, 49, 1, 0),
+	PLL_RATE(1200000000, 50, 1, 0),
+	PLL_RATE(1224000000, 51, 1, 0),
+	PLL_RATE(1248000000, 52, 1, 0),
+	PLL_RATE(1272000000, 53, 1, 0),
+	PLL_RATE(1296000000, 54, 1, 0),
+	PLL_RATE(1320000000, 55, 1, 0),
+	PLL_RATE(1344000000, 56, 1, 0),
+	PLL_RATE(1368000000, 57, 1, 0),
+	PLL_RATE(1392000000, 58, 1, 0),
+	PLL_RATE(1416000000, 59, 1, 0),
+	PLL_RATE(1440000000, 60, 1, 0),
+	PLL_RATE(1464000000, 61, 1, 0),
+	PLL_RATE(1488000000, 62, 1, 0),
+	{ /* sentinel */ },
+};
+
+static const struct clk_div_table cpu_div_table[] = {
+	{ .val = 1, .div = 1 },
+	{ .val = 2, .div = 2 },
+	{ .val = 3, .div = 3 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ .val = 8, .div = 16 },
+	{ /* sentinel */ },
+};
+
+static struct meson_clk_pll gxbb_fixed_pll = {
+	.m = {
+		.reg_off = HHI_MPLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_MPLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.od = {
+		.reg_off = HHI_MPLL_CNTL,
+		.shift   = 16,
+		.width   = 2,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static struct meson_clk_pll gxbb_hdmi_pll = {
+	.m = {
+		.reg_off = HHI_HDMI_PLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_HDMI_PLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.frac = {
+		.reg_off = HHI_HDMI_PLL_CNTL2,
+		.shift   = 0,
+		.width   = 12,
+	},
+	.od = {
+		.reg_off = HHI_HDMI_PLL_CNTL2,
+		.shift   = 16,
+		.width   = 2,
+	},
+	.od2 = {
+		.reg_off = HHI_HDMI_PLL_CNTL2,
+		.shift   = 22,
+		.width   = 2,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "hdmi_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static struct meson_clk_pll gxbb_sys_pll = {
+	.m = {
+		.reg_off = HHI_SYS_PLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_SYS_PLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.od = {
+		.reg_off = HHI_SYS_PLL_CNTL,
+		.shift   = 10,
+		.width   = 2,
+	},
+	.rate_table = sys_pll_rate_table,
+	.rate_count = ARRAY_SIZE(sys_pll_rate_table),
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static struct meson_clk_pll gxbb_gp0_pll = {
+	.m = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.od = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 16,
+		.width   = 2,
+	},
+	.rate_table = gp0_pll_rate_table,
+	.rate_count = ARRAY_SIZE(gp0_pll_rate_table),
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static struct clk_fixed_factor gxbb_fclk_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor gxbb_fclk_div3 = {
+	.mult = 1,
+	.div = 3,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor gxbb_fclk_div4 = {
+	.mult = 1,
+	.div = 4,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor gxbb_fclk_div5 = {
+	.mult = 1,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor gxbb_fclk_div7 = {
+	.mult = 1,
+	.div = 7,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll gxbb_mpll0 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &meson_clk_mpll_ro_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll gxbb_mpll1 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &meson_clk_mpll_ro_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll gxbb_mpll2 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &meson_clk_mpll_ro_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+/*
+ * FIXME cpu clocks and the legacy composite clocks (e.g. clk81) are both PLL
+ * post-dividers and should be modeled with their respective PLLs via the
+ * forthcoming coordinated clock rates feature
+ */
+static struct meson_clk_cpu gxbb_cpu_clk = {
+	.reg_off = HHI_SYS_CPU_CLK_CNTL1,
+	.div_table = cpu_div_table,
+	.clk_nb.notifier_call = meson_clk_cpu_notifier_cb,
+	.hw.init = &(struct clk_init_data){
+		.name = "cpu_clk",
+		.ops = &meson_clk_cpu_ops,
+		.parent_names = (const char *[]){ "sys_pll" },
+		.num_parents = 1,
+	},
+};
+
+static u32 mux_table_clk81[]	= { 6, 5, 7 };
+
+static struct clk_mux gxbb_mpeg_clk_sel = {
+	.reg = (void *)HHI_MPEG_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 12,
+	.flags = CLK_MUX_READ_ONLY,
+	.table = mux_table_clk81,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_sel",
+		.ops = &clk_mux_ro_ops,
+		/*
+		 * FIXME bits 14:12 selects from 8 possible parents:
+		 * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+		 * fclk_div4, fclk_div3, fclk_div5
+		 */
+		.parent_names = (const char *[]){ "fclk_div3", "fclk_div4",
+			"fclk_div5" },
+		.num_parents = 3,
+		.flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
+	},
+};
+
+static struct clk_divider gxbb_mpeg_clk_div = {
+	.reg = (void *)HHI_MPEG_CLK_CNTL,
+	.shift = 0,
+	.width = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_sel" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),
+	},
+};
+
+/* the mother of dragons^W gates */
+static struct clk_gate gxbb_clk81 = {
+	.reg = (void *)HHI_MPEG_CLK_CNTL,
+	.bit_idx = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "clk81",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_div" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL),
+	},
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(dos, HHI_GCLK_MPEG0, 1);
+static MESON_GATE(isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(spicc, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(sar_adc, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(smart_card, HHI_GCLK_MPEG0, 11);
+static MESON_GATE(rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(sdhc, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(stream, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(async_fifo, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(sdio, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(abuf, HHI_GCLK_MPEG0, 18);
+static MESON_GATE(hiu_iface, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(i2s_spdif, HHI_GCLK_MPEG1, 2);
+static MESON_GATE(eth, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(demux, HHI_GCLK_MPEG1, 4);
+static MESON_GATE(aiu_glue, HHI_GCLK_MPEG1, 6);
+static MESON_GATE(iec958, HHI_GCLK_MPEG1, 7);
+static MESON_GATE(i2s_out, HHI_GCLK_MPEG1, 8);
+static MESON_GATE(amclk, HHI_GCLK_MPEG1, 9);
+static MESON_GATE(aififo2, HHI_GCLK_MPEG1, 10);
+static MESON_GATE(mixer, HHI_GCLK_MPEG1, 11);
+static MESON_GATE(mixer_iface, HHI_GCLK_MPEG1, 12);
+static MESON_GATE(adc, HHI_GCLK_MPEG1, 13);
+static MESON_GATE(blkmv, HHI_GCLK_MPEG1, 14);
+static MESON_GATE(aiu, HHI_GCLK_MPEG1, 15);
+static MESON_GATE(uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(nand, HHI_GCLK_MPEG1, 24);
+static MESON_GATE(dos_parser, HHI_GCLK_MPEG1, 25);
+static MESON_GATE(usb, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(vdin1, HHI_GCLK_MPEG1, 28);
+static MESON_GATE(ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(hdmi_intr_sync, HHI_GCLK_MPEG2, 3);
+static MESON_GATE(hdmi_pclk, HHI_GCLK_MPEG2, 4);
+static MESON_GATE(usb1_ddr_bridge, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(usb0_ddr_bridge, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(dvin, HHI_GCLK_MPEG2, 12);
+static MESON_GATE(uart2, HHI_GCLK_MPEG2, 15);
+static MESON_GATE(sana, HHI_GCLK_MPEG2, 22);
+static MESON_GATE(vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(clk81_a53, HHI_GCLK_MPEG2, 29);
+
+static MESON_GATE(vclk2_venci0, HHI_GCLK_OTHER, 1);
+static MESON_GATE(vclk2_venci1, HHI_GCLK_OTHER, 2);
+static MESON_GATE(vclk2_vencp0, HHI_GCLK_OTHER, 3);
+static MESON_GATE(vclk2_vencp1, HHI_GCLK_OTHER, 4);
+static MESON_GATE(gclk_venci_int0, HHI_GCLK_OTHER, 8);
+static MESON_GATE(gclk_vencp_int, HHI_GCLK_OTHER, 9);
+static MESON_GATE(dac_clk, HHI_GCLK_OTHER, 10);
+static MESON_GATE(aoclk_gate, HHI_GCLK_OTHER, 14);
+static MESON_GATE(iec958_gate, HHI_GCLK_OTHER, 16);
+static MESON_GATE(enc480p, HHI_GCLK_OTHER, 20);
+static MESON_GATE(rng1, HHI_GCLK_OTHER, 21);
+static MESON_GATE(gclk_venci_int1, HHI_GCLK_OTHER, 22);
+static MESON_GATE(vclk2_venclmcc, HHI_GCLK_OTHER, 24);
+static MESON_GATE(vclk2_vencl, HHI_GCLK_OTHER, 25);
+static MESON_GATE(vclk_other, HHI_GCLK_OTHER, 26);
+static MESON_GATE(edp, HHI_GCLK_OTHER, 31);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]		    = &gxbb_sys_pll.hw,
+		[CLKID_CPUCLK]		    = &gxbb_cpu_clk.hw,
+		[CLKID_HDMI_PLL]	    = &gxbb_hdmi_pll.hw,
+		[CLKID_FIXED_PLL]	    = &gxbb_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]	    = &gxbb_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]	    = &gxbb_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]	    = &gxbb_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]	    = &gxbb_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]	    = &gxbb_fclk_div7.hw,
+		[CLKID_GP0_PLL]		    = &gxbb_gp0_pll.hw,
+		[CLKID_MPEG_SEL]	    = &gxbb_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]	    = &gxbb_mpeg_clk_div.hw,
+		[CLKID_CLK81]		    = &gxbb_clk81.hw,
+		[CLKID_MPLL0]		    = &gxbb_mpll0.hw,
+		[CLKID_MPLL1]		    = &gxbb_mpll1.hw,
+		[CLKID_MPLL2]		    = &gxbb_mpll2.hw,
+		[CLKID_DDR]		    = &gxbb_ddr.hw,
+		[CLKID_DOS]		    = &gxbb_dos.hw,
+		[CLKID_ISA]		    = &gxbb_isa.hw,
+		[CLKID_PL301]		    = &gxbb_pl301.hw,
+		[CLKID_PERIPHS]		    = &gxbb_periphs.hw,
+		[CLKID_SPICC]		    = &gxbb_spicc.hw,
+		[CLKID_I2C]		    = &gxbb_i2c.hw,
+		[CLKID_SAR_ADC]		    = &gxbb_sar_adc.hw,
+		[CLKID_SMART_CARD]	    = &gxbb_smart_card.hw,
+		[CLKID_RNG0]		    = &gxbb_rng0.hw,
+		[CLKID_UART0]		    = &gxbb_uart0.hw,
+		[CLKID_SDHC]		    = &gxbb_sdhc.hw,
+		[CLKID_STREAM]		    = &gxbb_stream.hw,
+		[CLKID_ASYNC_FIFO]	    = &gxbb_async_fifo.hw,
+		[CLKID_SDIO]		    = &gxbb_sdio.hw,
+		[CLKID_ABUF]		    = &gxbb_abuf.hw,
+		[CLKID_HIU_IFACE]	    = &gxbb_hiu_iface.hw,
+		[CLKID_ASSIST_MISC]	    = &gxbb_assist_misc.hw,
+		[CLKID_SPI]		    = &gxbb_spi.hw,
+		[CLKID_I2S_SPDIF]	    = &gxbb_i2s_spdif.hw,
+		[CLKID_ETH]		    = &gxbb_eth.hw,
+		[CLKID_DEMUX]		    = &gxbb_demux.hw,
+		[CLKID_AIU_GLUE]	    = &gxbb_aiu_glue.hw,
+		[CLKID_IEC958]		    = &gxbb_iec958.hw,
+		[CLKID_I2S_OUT]		    = &gxbb_i2s_out.hw,
+		[CLKID_AMCLK]		    = &gxbb_amclk.hw,
+		[CLKID_AIFIFO2]		    = &gxbb_aififo2.hw,
+		[CLKID_MIXER]		    = &gxbb_mixer.hw,
+		[CLKID_MIXER_IFACE]	    = &gxbb_mixer_iface.hw,
+		[CLKID_ADC]		    = &gxbb_adc.hw,
+		[CLKID_BLKMV]		    = &gxbb_blkmv.hw,
+		[CLKID_AIU]		    = &gxbb_aiu.hw,
+		[CLKID_UART1]		    = &gxbb_uart1.hw,
+		[CLKID_G2D]		    = &gxbb_g2d.hw,
+		[CLKID_USB0]		    = &gxbb_usb0.hw,
+		[CLKID_USB1]		    = &gxbb_usb1.hw,
+		[CLKID_RESET]		    = &gxbb_reset.hw,
+		[CLKID_NAND]		    = &gxbb_nand.hw,
+		[CLKID_DOS_PARSER]	    = &gxbb_dos_parser.hw,
+		[CLKID_USB]		    = &gxbb_usb.hw,
+		[CLKID_VDIN1]		    = &gxbb_vdin1.hw,
+		[CLKID_AHB_ARB0]	    = &gxbb_ahb_arb0.hw,
+		[CLKID_EFUSE]		    = &gxbb_efuse.hw,
+		[CLKID_BOOT_ROM]	    = &gxbb_boot_rom.hw,
+		[CLKID_AHB_DATA_BUS]	    = &gxbb_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]	    = &gxbb_ahb_ctrl_bus.hw,
+		[CLKID_HDMI_INTR_SYNC]	    = &gxbb_hdmi_intr_sync.hw,
+		[CLKID_HDMI_PCLK]	    = &gxbb_hdmi_pclk.hw,
+		[CLKID_USB1_DDR_BRIDGE]	    = &gxbb_usb1_ddr_bridge.hw,
+		[CLKID_USB0_DDR_BRIDGE]	    = &gxbb_usb0_ddr_bridge.hw,
+		[CLKID_MMC_PCLK]	    = &gxbb_mmc_pclk.hw,
+		[CLKID_DVIN]		    = &gxbb_dvin.hw,
+		[CLKID_UART2]		    = &gxbb_uart2.hw,
+		[CLKID_SANA]		    = &gxbb_sana.hw,
+		[CLKID_VPU_INTR]	    = &gxbb_vpu_intr.hw,
+		[CLKID_SEC_AHB_AHB3_BRIDGE] = &gxbb_sec_ahb_ahb3_bridge.hw,
+		[CLKID_CLK81_A53]	    = &gxbb_clk81_a53.hw,
+		[CLKID_VCLK2_VENCI0]	    = &gxbb_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]	    = &gxbb_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]	    = &gxbb_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]	    = &gxbb_vclk2_vencp1.hw,
+		[CLKID_GCLK_VENCI_INT0]	    = &gxbb_gclk_venci_int0.hw,
+		[CLKID_GCLK_VENCI_INT]	    = &gxbb_gclk_vencp_int.hw,
+		[CLKID_DAC_CLK]		    = &gxbb_dac_clk.hw,
+		[CLKID_AOCLK_GATE]	    = &gxbb_aoclk_gate.hw,
+		[CLKID_IEC958_GATE]	    = &gxbb_iec958_gate.hw,
+		[CLKID_ENC480P]		    = &gxbb_enc480p.hw,
+		[CLKID_RNG1]		    = &gxbb_rng1.hw,
+		[CLKID_GCLK_VENCI_INT1]	    = &gxbb_gclk_venci_int1.hw,
+		[CLKID_VCLK2_VENCLMCC]	    = &gxbb_vclk2_venclmcc.hw,
+		[CLKID_VCLK2_VENCL]	    = &gxbb_vclk2_vencl.hw,
+		[CLKID_VCLK_OTHER]	    = &gxbb_vclk_other.hw,
+		[CLKID_EDP]		    = &gxbb_edp.hw,
+		[CLKID_AO_MEDIA_CPU]	    = &gxbb_ao_media_cpu.hw,
+		[CLKID_AO_AHB_SRAM]	    = &gxbb_ao_ahb_sram.hw,
+		[CLKID_AO_AHB_BUS]	    = &gxbb_ao_ahb_bus.hw,
+		[CLKID_AO_IFACE]	    = &gxbb_ao_iface.hw,
+		[CLKID_AO_I2C]		    = &gxbb_ao_i2c.hw,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const gxbb_clk_plls[] = {
+	&gxbb_fixed_pll,
+	&gxbb_hdmi_pll,
+	&gxbb_sys_pll,
+	&gxbb_gp0_pll,
+};
+
+static struct meson_clk_mpll *const gxbb_clk_mplls[] = {
+	&gxbb_mpll0,
+	&gxbb_mpll1,
+	&gxbb_mpll2,
+};
+
+static struct clk_gate *gxbb_clk_gates[] = {
+	&gxbb_clk81,
+	&gxbb_ddr,
+	&gxbb_dos,
+	&gxbb_isa,
+	&gxbb_pl301,
+	&gxbb_periphs,
+	&gxbb_spicc,
+	&gxbb_i2c,
+	&gxbb_sar_adc,
+	&gxbb_smart_card,
+	&gxbb_rng0,
+	&gxbb_uart0,
+	&gxbb_sdhc,
+	&gxbb_stream,
+	&gxbb_async_fifo,
+	&gxbb_sdio,
+	&gxbb_abuf,
+	&gxbb_hiu_iface,
+	&gxbb_assist_misc,
+	&gxbb_spi,
+	&gxbb_i2s_spdif,
+	&gxbb_eth,
+	&gxbb_demux,
+	&gxbb_aiu_glue,
+	&gxbb_iec958,
+	&gxbb_i2s_out,
+	&gxbb_amclk,
+	&gxbb_aififo2,
+	&gxbb_mixer,
+	&gxbb_mixer_iface,
+	&gxbb_adc,
+	&gxbb_blkmv,
+	&gxbb_aiu,
+	&gxbb_uart1,
+	&gxbb_g2d,
+	&gxbb_usb0,
+	&gxbb_usb1,
+	&gxbb_reset,
+	&gxbb_nand,
+	&gxbb_dos_parser,
+	&gxbb_usb,
+	&gxbb_vdin1,
+	&gxbb_ahb_arb0,
+	&gxbb_efuse,
+	&gxbb_boot_rom,
+	&gxbb_ahb_data_bus,
+	&gxbb_ahb_ctrl_bus,
+	&gxbb_hdmi_intr_sync,
+	&gxbb_hdmi_pclk,
+	&gxbb_usb1_ddr_bridge,
+	&gxbb_usb0_ddr_bridge,
+	&gxbb_mmc_pclk,
+	&gxbb_dvin,
+	&gxbb_uart2,
+	&gxbb_sana,
+	&gxbb_vpu_intr,
+	&gxbb_sec_ahb_ahb3_bridge,
+	&gxbb_clk81_a53,
+	&gxbb_vclk2_venci0,
+	&gxbb_vclk2_venci1,
+	&gxbb_vclk2_vencp0,
+	&gxbb_vclk2_vencp1,
+	&gxbb_gclk_venci_int0,
+	&gxbb_gclk_vencp_int,
+	&gxbb_dac_clk,
+	&gxbb_aoclk_gate,
+	&gxbb_iec958_gate,
+	&gxbb_enc480p,
+	&gxbb_rng1,
+	&gxbb_gclk_venci_int1,
+	&gxbb_vclk2_venclmcc,
+	&gxbb_vclk2_vencl,
+	&gxbb_vclk_other,
+	&gxbb_edp,
+	&gxbb_ao_media_cpu,
+	&gxbb_ao_ahb_sram,
+	&gxbb_ao_ahb_bus,
+	&gxbb_ao_iface,
+	&gxbb_ao_i2c,
+};
+
+static int gxbb_clkc_probe(struct platform_device *pdev)
+{
+	void __iomem *clk_base;
+	int ret, clkid, i;
+	struct clk_hw *parent_hw;
+	struct clk *parent_clk;
+	struct device *dev = &pdev->dev;
+
+	/*  Generic clocks and PLLs */
+	clk_base = of_iomap(dev->of_node, 0);
+	if (!clk_base) {
+		pr_err("%s: Unable to map clk base\n", __func__);
+		return -ENXIO;
+	}
+
+	/* Populate base address for PLLs */
+	for (i = 0; i < ARRAY_SIZE(gxbb_clk_plls); i++)
+		gxbb_clk_plls[i]->base = clk_base;
+
+	/* Populate base address for MPLLs */
+	for (i = 0; i < ARRAY_SIZE(gxbb_clk_mplls); i++)
+		gxbb_clk_mplls[i]->base = clk_base;
+
+	/* Populate the base address for CPU clk */
+	gxbb_cpu_clk.base = clk_base;
+
+	/* Populate the base address for the MPEG clks */
+	gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
+	gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
+
+	/* Populate base address for gates */
+	for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
+		gxbb_clk_gates[i]->reg = clk_base +
+			(u64)gxbb_clk_gates[i]->reg;
+
+	/*
+	 * register all clks
+	 */
+	for (clkid = 0; clkid < NR_CLKS; clkid++) {
+		ret = devm_clk_hw_register(dev, gxbb_hw_onecell_data.hws[clkid]);
+		if (ret)
+			goto iounmap;
+	}
+
+	/*
+	 * Register CPU clk notifier
+	 *
+	 * FIXME this is wrong for a lot of reasons. First, the muxes should be
+	 * struct clk_hw objects. Second, we shouldn't program the muxes in
+	 * notifier handlers. The tricky programming sequence will be handled
+	 * by the forthcoming coordinated clock rates mechanism once that
+	 * feature is released.
+	 *
+	 * Furthermore, looking up the parent this way is terrible. At some
+	 * point we will stop allocating a default struct clk when registering
+	 * a new clk_hw, and this hack will no longer work. Releasing the ccr
+	 * feature before that time solves the problem :-)
+	 */
+	parent_hw = clk_hw_get_parent(&gxbb_cpu_clk.hw);
+	parent_clk = parent_hw->clk;
+	ret = clk_notifier_register(parent_clk, &gxbb_cpu_clk.clk_nb);
+	if (ret) {
+		pr_err("%s: failed to register clock notifier for cpu_clk\n",
+				__func__);
+		goto iounmap;
+	}
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+			&gxbb_hw_onecell_data);
+
+iounmap:
+	iounmap(clk_base);
+	return ret;
+}
+
+static const struct of_device_id gxbb_clkc_match_table[] = {
+	{ .compatible = "amlogic,gxbb-clkc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gxbb_match_table);
+
+static struct platform_driver gxbb_driver = {
+	.probe		= gxbb_clkc_probe,
+	.driver		= {
+		.name	= "gxbb-clkc",
+		.of_match_table = gxbb_clkc_match_table,
+	},
+};
+
+static int __init gxbb_clkc_init(void)
+{
+	return platform_driver_register(&gxbb_driver);
+}
+module_init(gxbb_clkc_init);
+
+static void __exit gxbb_clkc_exit(void)
+{
+	platform_driver_unregister(&gxbb_driver);
+}
+module_exit(gxbb_clkc_exit);
+
+MODULE_DESCRIPTION("AmLogic S905 / GXBB Clock Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:gxbb-clkc");
+MODULE_AUTHOR("Michael Turquette <mturquette@baylibre.com>");
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
new file mode 100644
index 000000000000..a2adf3448b59
--- /dev/null
+++ b/drivers/clk/meson/gxbb.h
@@ -0,0 +1,271 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __GXBB_H
+#define __GXBB_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet are listed in comment blocks below.
+ * Those offsets must be multiplied by 4 before adding them to the base address
+ * to get the right value
+ */
+#define SCR				0x2C /* 0x0b offset in data sheet */
+#define TIMEOUT_VALUE			0x3c /* 0x0f offset in data sheet */
+
+#define HHI_GP0_PLL_CNTL		0x40 /* 0x10 offset in data sheet */
+#define HHI_GP0_PLL_CNTL2		0x44 /* 0x11 offset in data sheet */
+#define HHI_GP0_PLL_CNTL3		0x48 /* 0x12 offset in data sheet */
+#define HHI_GP0_PLL_CNTL4		0x4c /* 0x13 offset in data sheet */
+
+#define HHI_XTAL_DIVN_CNTL		0xbc /* 0x2f offset in data sheet */
+#define HHI_TIMER90K			0xec /* 0x3b offset in data sheet */
+
+#define HHI_MEM_PD_REG0			0x100 /* 0x40 offset in data sheet */
+#define HHI_MEM_PD_REG1			0x104 /* 0x41 offset in data sheet */
+#define HHI_VPU_MEM_PD_REG1		0x108 /* 0x42 offset in data sheet */
+#define HHI_VIID_CLK_DIV		0x128 /* 0x4a offset in data sheet */
+#define HHI_VIID_CLK_CNTL		0x12c /* 0x4b offset in data sheet */
+
+#define HHI_GCLK_MPEG0			0x140 /* 0x50 offset in data sheet */
+#define HHI_GCLK_MPEG1			0x144 /* 0x51 offset in data sheet */
+#define HHI_GCLK_MPEG2			0x148 /* 0x52 offset in data sheet */
+#define HHI_GCLK_OTHER			0x150 /* 0x54 offset in data sheet */
+#define HHI_GCLK_AO			0x154 /* 0x55 offset in data sheet */
+#define HHI_SYS_OSCIN_CNTL		0x158 /* 0x56 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL1		0x15c /* 0x57 offset in data sheet */
+#define HHI_SYS_CPU_RESET_CNTL		0x160 /* 0x58 offset in data sheet */
+#define HHI_VID_CLK_DIV			0x164 /* 0x59 offset in data sheet */
+
+#define HHI_MPEG_CLK_CNTL		0x174 /* 0x5d offset in data sheet */
+#define HHI_AUD_CLK_CNTL		0x178 /* 0x5e offset in data sheet */
+#define HHI_VID_CLK_CNTL		0x17c /* 0x5f offset in data sheet */
+#define HHI_AUD_CLK_CNTL2		0x190 /* 0x64 offset in data sheet */
+#define HHI_VID_CLK_CNTL2		0x194 /* 0x65 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c /* 0x67 offset in data sheet */
+#define HHI_VID_PLL_CLK_DIV		0x1a0 /* 0x68 offset in data sheet */
+#define HHI_AUD_CLK_CNTL3		0x1a4 /* 0x69 offset in data sheet */
+#define HHI_MALI_CLK_CNTL		0x1b0 /* 0x6c offset in data sheet */
+#define HHI_VPU_CLK_CNTL		0x1bC /* 0x6f offset in data sheet */
+
+#define HHI_HDMI_CLK_CNTL		0x1CC /* 0x73 offset in data sheet */
+#define HHI_VDEC_CLK_CNTL		0x1E0 /* 0x78 offset in data sheet */
+#define HHI_VDEC2_CLK_CNTL		0x1E4 /* 0x79 offset in data sheet */
+#define HHI_VDEC3_CLK_CNTL		0x1E8 /* 0x7a offset in data sheet */
+#define HHI_VDEC4_CLK_CNTL		0x1EC /* 0x7b offset in data sheet */
+#define HHI_HDCP22_CLK_CNTL		0x1F0 /* 0x7c offset in data sheet */
+#define HHI_VAPBCLK_CNTL		0x1F4 /* 0x7d offset in data sheet */
+
+#define HHI_VPU_CLKB_CNTL		0x20C /* 0x83 offset in data sheet */
+#define HHI_USB_CLK_CNTL		0x220 /* 0x88 offset in data sheet */
+#define HHI_32K_CLK_CNTL		0x224 /* 0x89 offset in data sheet */
+#define HHI_GEN_CLK_CNTL		0x228 /* 0x8a offset in data sheet */
+#define HHI_GEN_CLK_CNTL		0x228 /* 0x8a offset in data sheet */
+
+#define HHI_PCM_CLK_CNTL		0x258 /* 0x96 offset in data sheet */
+#define HHI_NAND_CLK_CNTL		0x25C /* 0x97 offset in data sheet */
+#define HHI_SD_EMMC_CLK_CNTL		0x264 /* 0x99 offset in data sheet */
+
+#define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
+#define HHI_MPLL_CNTL2			0x284 /* 0xa1 offset in data sheet */
+#define HHI_MPLL_CNTL3			0x288 /* 0xa2 offset in data sheet */
+#define HHI_MPLL_CNTL4			0x28C /* 0xa3 offset in data sheet */
+#define HHI_MPLL_CNTL5			0x290 /* 0xa4 offset in data sheet */
+#define HHI_MPLL_CNTL6			0x294 /* 0xa5 offset in data sheet */
+#define HHI_MPLL_CNTL7			0x298 /* MP0, 0xa6 offset in data sheet */
+#define HHI_MPLL_CNTL8			0x29C /* MP1, 0xa7 offset in data sheet */
+#define HHI_MPLL_CNTL9			0x2A0 /* MP2, 0xa8 offset in data sheet */
+#define HHI_MPLL_CNTL10			0x2A4 /* MP2, 0xa9 offset in data sheet */
+
+#define HHI_MPLL3_CNTL0			0x2E0 /* 0xb8 offset in data sheet */
+#define HHI_MPLL3_CNTL1			0x2E4 /* 0xb9 offset in data sheet */
+#define HHI_VDAC_CNTL0			0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL1			0x2F8 /* 0xbe offset in data sheet */
+
+#define HHI_SYS_PLL_CNTL		0x300 /* 0xc0 offset in data sheet */
+#define HHI_SYS_PLL_CNTL2		0x304 /* 0xc1 offset in data sheet */
+#define HHI_SYS_PLL_CNTL3		0x308 /* 0xc2 offset in data sheet */
+#define HHI_SYS_PLL_CNTL4		0x30c /* 0xc3 offset in data sheet */
+#define HHI_SYS_PLL_CNTL5		0x310 /* 0xc4 offset in data sheet */
+#define HHI_DPLL_TOP_I			0x318 /* 0xc6 offset in data sheet */
+#define HHI_DPLL_TOP2_I			0x31C /* 0xc7 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL2		0x324 /* 0xc9 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL3		0x328 /* 0xca offset in data sheet */
+#define HHI_HDMI_PLL_CNTL4		0x32C /* 0xcb offset in data sheet */
+#define HHI_HDMI_PLL_CNTL5		0x330 /* 0xcc offset in data sheet */
+#define HHI_HDMI_PLL_CNTL6		0x334 /* 0xcd offset in data sheet */
+#define HHI_HDMI_PLL_CNTL_I		0x338 /* 0xce offset in data sheet */
+#define HHI_HDMI_PLL_CNTL7		0x33C /* 0xcf offset in data sheet */
+
+#define HHI_HDMI_PHY_CNTL0		0x3A0 /* 0xe8 offset in data sheet */
+#define HHI_HDMI_PHY_CNTL1		0x3A4 /* 0xe9 offset in data sheet */
+#define HHI_HDMI_PHY_CNTL2		0x3A8 /* 0xea offset in data sheet */
+#define HHI_HDMI_PHY_CNTL3		0x3AC /* 0xeb offset in data sheet */
+
+#define HHI_VID_LOCK_CLK_CNTL		0x3C8 /* 0xf2 offset in data sheet */
+#define HHI_BT656_CLK_CNTL		0x3D4 /* 0xf5 offset in data sheet */
+#define HHI_SAR_CLK_CNTL		0x3D8 /* 0xf6 offset in data sheet */
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * Migrate them out of this header and into the DT header file when they need
+ * to be exposed to client nodes in DT: include/dt-bindings/clock/gxbb-clkc.h
+ */
+#define CLKID_SYS_PLL		  0
+/* CLKID_CPUCLK */
+#define CLKID_HDMI_PLL		  2
+#define CLKID_FIXED_PLL		  3
+#define CLKID_FCLK_DIV2		  4
+#define CLKID_FCLK_DIV3		  5
+#define CLKID_FCLK_DIV4		  6
+#define CLKID_FCLK_DIV5		  7
+#define CLKID_FCLK_DIV7		  8
+#define CLKID_GP0_PLL		  9
+#define CLKID_MPEG_SEL		  10
+#define CLKID_MPEG_DIV		  11
+/* CLKID_CLK81 */
+#define CLKID_MPLL0		  13
+#define CLKID_MPLL1		  14
+#define CLKID_MPLL2		  15
+#define CLKID_DDR		  16
+#define CLKID_DOS		  17
+#define CLKID_ISA		  18
+#define CLKID_PL301		  19
+#define CLKID_PERIPHS		  20
+#define CLKID_SPICC		  21
+#define CLKID_I2C		  22
+#define CLKID_SAR_ADC		  23
+#define CLKID_SMART_CARD	  24
+#define CLKID_RNG0		  25
+#define CLKID_UART0		  26
+#define CLKID_SDHC		  27
+#define CLKID_STREAM		  28
+#define CLKID_ASYNC_FIFO	  29
+#define CLKID_SDIO		  30
+#define CLKID_ABUF		  31
+#define CLKID_HIU_IFACE		  32
+#define CLKID_ASSIST_MISC	  33
+#define CLKID_SPI		  34
+#define CLKID_I2S_SPDIF		  35
+#define CLKID_ETH		  36
+#define CLKID_DEMUX		  37
+#define CLKID_AIU_GLUE		  38
+#define CLKID_IEC958		  39
+#define CLKID_I2S_OUT		  40
+#define CLKID_AMCLK		  41
+#define CLKID_AIFIFO2		  42
+#define CLKID_MIXER		  43
+#define CLKID_MIXER_IFACE	  44
+#define CLKID_ADC		  45
+#define CLKID_BLKMV		  46
+#define CLKID_AIU		  47
+#define CLKID_UART1		  48
+#define CLKID_G2D		  49
+#define CLKID_USB0		  50
+#define CLKID_USB1		  51
+#define CLKID_RESET		  52
+#define CLKID_NAND		  53
+#define CLKID_DOS_PARSER	  54
+#define CLKID_USB		  55
+#define CLKID_VDIN1		  56
+#define CLKID_AHB_ARB0		  57
+#define CLKID_EFUSE		  58
+#define CLKID_BOOT_ROM		  59
+#define CLKID_AHB_DATA_BUS	  60
+#define CLKID_AHB_CTRL_BUS	  61
+#define CLKID_HDMI_INTR_SYNC	  62
+#define CLKID_HDMI_PCLK		  63
+#define CLKID_USB1_DDR_BRIDGE	  64
+#define CLKID_USB0_DDR_BRIDGE	  65
+#define CLKID_MMC_PCLK		  66
+#define CLKID_DVIN		  67
+#define CLKID_UART2		  68
+#define CLKID_SANA		  69
+#define CLKID_VPU_INTR		  70
+#define CLKID_SEC_AHB_AHB3_BRIDGE 71
+#define CLKID_CLK81_A53		  72
+#define CLKID_VCLK2_VENCI0	  73
+#define CLKID_VCLK2_VENCI1	  74
+#define CLKID_VCLK2_VENCP0	  75
+#define CLKID_VCLK2_VENCP1	  76
+#define CLKID_GCLK_VENCI_INT0	  77
+#define CLKID_GCLK_VENCI_INT	  78
+#define CLKID_DAC_CLK		  79
+#define CLKID_AOCLK_GATE	  80
+#define CLKID_IEC958_GATE	  81
+#define CLKID_ENC480P		  82
+#define CLKID_RNG1		  83
+#define CLKID_GCLK_VENCI_INT1	  84
+#define CLKID_VCLK2_VENCLMCC	  85
+#define CLKID_VCLK2_VENCL	  86
+#define CLKID_VCLK_OTHER	  87
+#define CLKID_EDP		  88
+#define CLKID_AO_MEDIA_CPU	  89
+#define CLKID_AO_AHB_SRAM	  90
+#define CLKID_AO_AHB_BUS	  91
+#define CLKID_AO_IFACE		  92
+#define CLKID_AO_I2C		  93
+
+#define NR_CLKS			  94
+
+/* include the CLKIDs that have been made part of the stable DT binding */
+#include <dt-bindings/clock/gxbb-clkc.h>
+
+#endif /* __GXBB_H */
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
new file mode 100644
index 000000000000..f889d80246cb
--- /dev/null
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -0,0 +1,12 @@
+/*
+ * GXBB clock tree IDs
+ */
+
+#ifndef __GXBB_CLKC_H
+#define __GXBB_CLKC_H
+
+#define CLKID_CPUCLK		1
+#define CLKID_CLK81		12
+#define CLKID_ETH		36
+
+#endif /* __GXBB_CLKC_H */
-- 
2.1.4