linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 1/3] watchdog: Add Meson GXBB Watchdog Driver
Date: Sun, 10 Jul 2016 11:11:04 +0200	[thread overview]
Message-ID: <1468141867-4172-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1468141867-4172-1-git-send-email-narmstrong@baylibre.com>

Add watchdog specific driver for Amlogic Meson GXBB SoC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/watchdog/Kconfig          |  10 ++
 drivers/watchdog/Makefile         |   1 +
 drivers/watchdog/meson_gxbb_wdt.c | 270 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 281 insertions(+)
 create mode 100644 drivers/watchdog/meson_gxbb_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9c41431..ad38cf5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -609,6 +609,16 @@ config QCOM_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called qcom_wdt.
 
+config MESON_GXBB_WATCHDOG
+	tristate "Amlogic Meson GXBB SoCs watchdog support"
+	depends on ARCH_MESON
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in Amlogic Meson GXBB SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called meson_gxbb_wdt.
+
 config MESON_WATCHDOG
 	tristate "Amlogic Meson SoCs watchdog support"
 	depends on ARCH_MESON
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 9bde095..a46bf09 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o
 obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
 obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
 obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
+obj-$(CONFIG_MESON_GXBB_WATCHDOG) += meson_gxbb_wdt.o
 obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
 obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
 obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
new file mode 100644
index 0000000..44d180a
--- /dev/null
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -0,0 +1,270 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT	30	/* seconds */
+
+#define GXBB_WDT_CTRL_REG			0x0
+#define GXBB_WDT_TCNT_REG			0x8
+#define GXBB_WDT_RSET_REG			0xc
+
+#define GXBB_WDT_CTRL_CLKDIV_EN			BIT(25)
+#define GXBB_WDT_CTRL_CLK_EN			BIT(24)
+#define GXBB_WDT_CTRL_EE_RESET			BIT(21)
+#define GXBB_WDT_CTRL_EN			BIT(18)
+#define GXBB_WDT_CTRL_DIV_MASK			(BIT(18) - 1)
+
+#define GXBB_WDT_TCNT_SETUP_MASK		(BIT(16) - 1)
+#define GXBB_WDT_TCNT_CNT_SHIFT			16
+
+struct meson_gxbb_wdt {
+	void __iomem *reg_base;
+	struct watchdog_device wdt_dev;
+	struct clk *clk;
+};
+
+static int meson_gxbb_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) | GXBB_WDT_CTRL_EN,
+	       data->reg_base + GXBB_WDT_CTRL_REG);
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) & ~GXBB_WDT_CTRL_EN,
+	       data->reg_base + GXBB_WDT_CTRL_REG);
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	writel(0, data->reg_base + GXBB_WDT_RSET_REG);
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				      unsigned int timeout)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+	unsigned long tcnt = timeout * 1000;
+
+	if (tcnt > GXBB_WDT_TCNT_SETUP_MASK)
+		tcnt = GXBB_WDT_TCNT_SETUP_MASK;
+
+	wdt_dev->timeout = timeout;
+
+	meson_gxbb_wdt_ping(wdt_dev);
+
+	writel(tcnt, data->reg_base + GXBB_WDT_TCNT_REG);
+
+	return 0;
+}
+
+static unsigned int meson_gxbb_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+	unsigned long reg;
+
+	reg = readl(data->reg_base + GXBB_WDT_TCNT_REG);
+
+	return ((reg >> GXBB_WDT_TCNT_CNT_SHIFT) -
+		(reg & GXBB_WDT_TCNT_SETUP_MASK)) / 1000;
+}
+
+static const struct watchdog_ops meson_gxbb_wdt_ops = {
+	.start = meson_gxbb_wdt_start,
+	.stop = meson_gxbb_wdt_stop,
+	.ping = meson_gxbb_wdt_ping,
+	.set_timeout = meson_gxbb_wdt_set_timeout,
+	.get_timeleft = meson_gxbb_wdt_get_timeleft,
+};
+
+static const struct watchdog_info meson_gxbb_wdt_info = {
+	.identity = "Meson GXBB Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static int __maybe_unused meson_gxbb_wdt_resume(struct device *dev)
+{
+	struct meson_gxbb_wdt *data = dev_get_drvdata(dev);
+
+	if (watchdog_active(&data->wdt_dev))
+		meson_gxbb_wdt_start(&data->wdt_dev);
+
+	return 0;
+}
+
+static int __maybe_unused meson_gxbb_wdt_suspend(struct device *dev)
+{
+	struct meson_gxbb_wdt *data = dev_get_drvdata(dev);
+
+	if (watchdog_active(&data->wdt_dev))
+		meson_gxbb_wdt_stop(&data->wdt_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops meson_gxbb_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(meson_gxbb_wdt_suspend, meson_gxbb_wdt_resume)
+};
+
+static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
+	 { .compatible = "amlogic,meson-gxbb-wdt", },
+	 { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
+
+static int meson_gxbb_wdt_probe(struct platform_device *pdev)
+{
+	struct meson_gxbb_wdt *data;
+	struct resource *res;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg_base))
+		return PTR_ERR(data->reg_base);
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk))
+		return PTR_ERR(data->clk);
+
+	clk_prepare_enable(data->clk);
+
+	platform_set_drvdata(pdev, data);
+
+	data->wdt_dev.parent = &pdev->dev;
+	data->wdt_dev.info = &meson_gxbb_wdt_info;
+	data->wdt_dev.ops = &meson_gxbb_wdt_ops;
+	data->wdt_dev.max_hw_heartbeat_ms = GXBB_WDT_TCNT_SETUP_MASK;
+	data->wdt_dev.min_timeout = 1;
+	data->wdt_dev.timeout = DEFAULT_TIMEOUT;
+	watchdog_set_drvdata(&data->wdt_dev, data);
+
+	/* Setup with 1ms timebase */
+	writel(((clk_get_rate(data->clk) / 1000) & GXBB_WDT_CTRL_DIV_MASK) |
+		GXBB_WDT_CTRL_EE_RESET |
+		GXBB_WDT_CTRL_CLK_EN |
+		GXBB_WDT_CTRL_CLKDIV_EN,
+		data->reg_base + GXBB_WDT_CTRL_REG);
+
+	meson_gxbb_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout);
+
+	ret = watchdog_register_device(&data->wdt_dev);
+	if (ret) {
+		clk_disable_unprepare(data->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_remove(struct platform_device *pdev)
+{
+	struct meson_gxbb_wdt *data = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&data->wdt_dev);
+
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static void meson_gxbb_wdt_shutdown(struct platform_device *pdev)
+{
+	struct meson_gxbb_wdt *data = platform_get_drvdata(pdev);
+
+	meson_gxbb_wdt_stop(&data->wdt_dev);
+}
+
+static struct platform_driver meson_gxbb_wdt_driver = {
+	.probe	= meson_gxbb_wdt_probe,
+	.remove	= meson_gxbb_wdt_remove,
+	.shutdown = meson_gxbb_wdt_shutdown,
+	.driver = {
+		.name = "meson-gxbb-wdt",
+		.pm = &meson_gxbb_wdt_pm_ops,
+		.of_match_table	= meson_gxbb_wdt_dt_ids,
+	},
+};
+
+module_platform_driver(meson_gxbb_wdt_driver);
+
+MODULE_ALIAS("platform:meson-gxbb-wdt");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic Meson GXBB Watchdog timer driver");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.7.0

  reply	other threads:[~2016-07-10  9:11 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-10  9:11 [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver Neil Armstrong
2016-07-10  9:11 ` Neil Armstrong [this message]
2016-07-10 16:02   ` [PATCH v3 1/3] watchdog: Add Meson GXBB Watchdog Driver Guenter Roeck
2016-07-10  9:11 ` [PATCH v3 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings Neil Armstrong
2016-07-10 16:02   ` Guenter Roeck
2016-07-10  9:11 ` [PATCH v3 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node Neil Armstrong
2016-07-10 16:03   ` Guenter Roeck
2016-07-12  4:12     ` Kevin Hilman
2016-08-04  0:27       ` Kevin Hilman
2016-08-04  0:29         ` Kevin Hilman
2016-08-15 20:40           ` Kevin Hilman
2016-08-16  1:51             ` Guenter Roeck
2016-08-16 13:10               ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468141867-4172-2-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).