[RFCv3 usb-next 2/3] usb: host: add a generic platform USB roothub driver

[chunfeng.yun@mediatek.com (Chunfeng Yun)]

On Tue, 2017-08-15 at 00:45 +0200, Martin Blumenstingl wrote:
> Many SoC platforms have separate devices for the USB PHY which are
> registered through the generic PHY framework. These PHYs have to be
> enabled to make the USB controller actually work. They also have to be
> disabled again on shutdown/suspend.
> 
> Currently (at least) the following HCI platform drivers are using custom
> code to obtain all PHYs via devicetree for the roothub/controller and
> disable/enable them when required:
> - ehci-platform.c has ehci_platform_power_{on,off}
> - xhci-mtk.c has xhci_mtk_phy_{init,exit,power_on,power_off}
> - ohci-platform.c has ohci_platform_power_{on,off}
> 
> These drivers are not using the generic devicetree USB device bindings
> yet which were only introduced recently (documentation is available in
> devicetree/bindings/usb/usb-device.txt).
> With this new driver the usb2-phy and usb3-phy can be specified directly
> in the child-node of the corresponding port of the roothub via
> devicetree. This can be extended by not just parsing PHYs (some of the
> other drivers listed above are for example also parsing a list of clocks
> as well) when required.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/usb/host/Kconfig            |   3 +
>  drivers/usb/host/Makefile           |   2 +
>  drivers/usb/host/platform-roothub.c | 180 ++++++++++++++++++++++++++++++++++++
>  drivers/usb/host/platform-roothub.h |  12 +++
>  4 files changed, 197 insertions(+)
>  create mode 100644 drivers/usb/host/platform-roothub.c
>  create mode 100644 drivers/usb/host/platform-roothub.h
> 

Tested-by: Chunfeng Yun<chunfeng.yun@mediatek.com>


> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index fa5692dec832..b8b05c786b2a 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -805,6 +805,9 @@ config USB_HCD_SSB
>  
>  	  If unsure, say N.
>  
> +config USB_PLATFORM_ROOTHUB
> +	bool
> +
>  config USB_HCD_TEST_MODE
>  	bool "HCD test mode support"
>  	---help---
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index cf2691fffcc0..dc817f82d632 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -29,6 +29,8 @@ obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
>  
>  obj-$(CONFIG_USB_PCI)	+= pci-quirks.o
>  
> +obj-$(CONFIG_USB_PLATFORM_ROOTHUB)	+= platform-roothub.o
> +
>  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
>  obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
>  obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
> diff --git a/drivers/usb/host/platform-roothub.c b/drivers/usb/host/platform-roothub.c
> new file mode 100644
> index 000000000000..70d2d97aa8b2
> --- /dev/null
> +++ b/drivers/usb/host/platform-roothub.c
> @@ -0,0 +1,180 @@
[...]