From mboxrd@z Thu Jan  1 00:00:00 1970
From: jbrunet@baylibre.com (Jerome Brunet)
Date: Sun, 12 Nov 2017 21:10:10 +0100
Subject: [PATCH] net: phy: realtek: fix RTL8211F interrupt mode
In-Reply-To: <20171112200608.GA16892@lunn.ch>
References: <66991733-9d1a-dbd2-9857-bba1ffca1cf8@gmail.com>
 <20171112182521.GH30830@lunn.ch> <1510511808.3550.182.camel@baylibre.com>
 <20171112200608.GA16892@lunn.ch>
Message-ID: <1510517410.3550.187.camel@baylibre.com>
To: linus-amlogic@lists.infradead.org
List-Id: linus-amlogic.lists.infradead.org

On Sun, 2017-11-12 at 21:06 +0100, Andrew Lunn wrote:
> On Sun, Nov 12, 2017 at 07:36:48PM +0100, Jerome Brunet wrote:
> > On Sun, 2017-11-12 at 19:25 +0100, Andrew Lunn wrote:
> > > On Sun, Nov 12, 2017 at 04:16:04PM +0100, Heiner Kallweit wrote:
> > > > After commit b94d22d94ad22 "ARM64: dts: meson-gx: add external PHY
> > > > interrupt on some platforms" ethernet stopped working on my Odroid-C2
> > > > which has a RTL8211F phy.
> > > 
> > > Hi Jerome
> > > 
> > > Please could you test this. I Just want to be sure we don't introduce
> > > a regression by breaking the boards you tested on.
> > 
> > Sure I'll try it tomorrow.
> > 
> > When I tested this, I was more focused on the SoC side of it (the interrupt
> > controller itself) and whether the interrupt worked or not. The board (p200)
> > I
> > tested on used a micrel PHY and worked well ...
> 
> Hi Jerome
> 
> Ah, O.K. Do you have a board with a RTL8211?
I do have some. I'll confirm Heiner's report and fix tomorrow.

> If all your boards use a
> different PHY, there is no chance of a regression for you.
I'm not expecting any, quite the contrary actually

> 
> Thanks
> 	Andrew