From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Mon, 05 Feb 2018 10:51:19 +0100 Subject: [PATCH 08/19] clk: meson: add regmap to the clock controllers In-Reply-To: References: <20180131180945.18025-1-jbrunet@baylibre.com> <20180131180945.18025-9-jbrunet@baylibre.com> Message-ID: <1517824279.3153.42.camel@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org On Sat, 2018-02-03 at 19:53 +0100, Martin Blumenstingl wrote: > On Wed, Jan 31, 2018 at 7:09 PM, Jerome Brunet wrote: > > This change register a regmap in meson8b, gxbb and axg controllers. > > The clock are still accessing their registers directly through iomem. > > Once all clocks handled by these controllers have been move to regmap, > > the regmap register will be removed and replaced with a syscon request. > > maybe you can add a comment that some of the registers from this area > need to be accessed outside the clock driver (by the HDMI driver for > example - which is the case on GX and Meson8/8b IIRC) if you have to > re-spin this series I think it was mentioned in the cover letter, but you are right, I should mention it here as well. > > > Signed-off-by: Jerome Brunet > > Acked-by: Martin Blumenstingl