From: sean.wang@mediatek.com (Sean Wang)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 5/7] watchdog: mtk: allow setting timeout in devicetree
Date: Sat, 10 Feb 2018 19:10:02 +0800 [thread overview]
Message-ID: <1518261002.9025.36.camel@mtkswgap22> (raw)
In-Reply-To: <20180210091911.3644-5-marcus.folkesson@gmail.com>
Hi, Marcus
The changes you made for dt-bindings and driver should be put into
separate patches.
And the property timeout-sec seems to be generic enough to all devices,
so why not add a common document to describe it and allow those devices
to refer to, like other dt-bindings for other kinds of devices usually
did.
Sean
On Sat, 2018-02-10 at 10:19 +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> By following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt, it also
> let us to set timout-sec property in devicetree.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 4 ++++
> drivers/watchdog/mtk_wdt.c | 2 +-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> index 5b38a30e608c..859dee167b91 100644
> --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> @@ -11,9 +11,13 @@ Required properties:
>
> - reg : Specifies base physical address and size of the registers.
>
> +Optional properties:
> +- timeout-sec: contains the watchdog timeout in seconds.
> +
> Example:
>
> wdt: watchdog at 10000000 {
> compatible = "mediatek,mt6589-wdt";
> reg = <0x10000000 0x18>;
> + timeout-sec = <10>;
> };
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 7ed417a765c7..fcdc10ec28a3 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -57,7 +57,7 @@
> #define DRV_VERSION "1.0"
>
> static bool nowayout = WATCHDOG_NOWAYOUT;
> -static unsigned int timeout = WDT_MAX_TIMEOUT;
> +static unsigned int timeout;
>
> struct mtk_wdt_dev {
> struct watchdog_device wdt_dev;
next prev parent reply other threads:[~2018-02-10 11:10 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-10 9:19 [PATCH v2 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 2/7] watchdog: sunxi: allow setting timeout " Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 3/7] watchdog: sirfsoc: " Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 4/7] watchdog: pnx4008: make use of timeout-secs provided " Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 5/7] watchdog: mtk: allow setting timeout " Marcus Folkesson
2018-02-10 11:10 ` Sean Wang [this message]
2018-02-10 12:43 ` Marcus Folkesson
2018-02-10 20:12 ` Marcus Folkesson
2018-02-11 1:52 ` Guenter Roeck
2018-02-11 7:46 ` Sean Wang
2018-02-11 11:17 ` Guenter Roeck
2018-02-10 9:19 ` [PATCH v2 6/7] watchdog: meson: " Marcus Folkesson
2018-02-10 9:19 ` [PATCH v2 7/7] watchdog: coh901327: make use of timeout-secs provided " Marcus Folkesson
2018-02-11 17:33 ` [v2, " Guenter Roeck
2018-02-22 14:00 ` [PATCH v2 " Linus Walleij
2018-02-10 14:29 ` [PATCH v2 1/7] watchdog: sama5d4: " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1518261002.9025.36.camel@mtkswgap22 \
--to=sean.wang@mediatek.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).