From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH u-boot] boards: amlogic: Fix boards README
Date: Wed, 27 Jun 2018 17:19:02 +0200 [thread overview]
Message-ID: <1530112742-13618-1-git-send-email-narmstrong@baylibre.com> (raw)
Fix typos and update the supported devices for all Amlogic boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm/mach-meson/Kconfig | 2 +-
board/amlogic/khadas-vim/README | 8 +++++++-
board/amlogic/libretech-cc/README | 12 +++++++++---
board/amlogic/odroid-c2/README | 5 +++++
board/amlogic/p212/README | 7 +++++++
5 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 9a06ccc..5364e9d 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -17,7 +17,7 @@ config MESON_GXL
select DM
select DM_SERIAL
help
- The Amlogic Meson GXL (S905X and S905X) is an ARM SoC with a
+ The Amlogic Meson GXL (S905X and S905D) is an ARM SoC with a
quad-core Cortex-A53 CPU and a Mali-450 GPU.
if MESON_GXBB
diff --git a/board/amlogic/khadas-vim/README b/board/amlogic/khadas-vim/README
index 7eaca72..0ccd8f5 100644
--- a/board/amlogic/khadas-vim/README
+++ b/board/amlogic/khadas-vim/README
@@ -4,7 +4,7 @@ U-Boot for Khadas VIM
Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion
Technology Co., Ltd with the following specifications:
- - Amlogic S905x ARM Cortex-A53 quad-core SoC @ 2GHz
+ - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
- 2GB DDR3 SDRAM
- 10/100 Ethernet
@@ -20,6 +20,12 @@ Currently the u-boot port supports the following devices:
- serial
- eMMC, microSD
- Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - USB Host
+ - ADC
U-Boot compilation
==================
diff --git a/board/amlogic/libretech-cc/README b/board/amlogic/libretech-cc/README
index c06a392..d007f58 100644
--- a/board/amlogic/libretech-cc/README
+++ b/board/amlogic/libretech-cc/README
@@ -4,13 +4,13 @@ U-Boot for LibreTech CC
LibreTech CC is a single board computer manufactured by Libre Technology
with the following specifications:
- - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 2GHz
+ - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
- 2GB DDR3 SDRAM
- - Gigabit Ethernet
+ - 10/100 Ethernet
- HDMI 2.0 4K/60Hz display
- 40-pin GPIO header
- - 4 x USB 2.0 Host, 1 x USB OTG
+ - 4 x USB 2.0 Host
- eMMC, microSD
- Infrared receiver
@@ -20,6 +20,12 @@ Currently the U-Boot port supports the following devices:
- serial
- eMMC, microSD
- Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - USB Host
+ - ADC
U-Boot compilation
==================
diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README
index b407c04..bed48c5 100644
--- a/board/amlogic/odroid-c2/README
+++ b/board/amlogic/odroid-c2/README
@@ -20,6 +20,11 @@ Currently the u-boot port supports the following devices:
- serial
- eMMC, microSD
- Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - ADC
u-boot compilation
==================
diff --git a/board/amlogic/p212/README b/board/amlogic/p212/README
index 979502d..ef5370c 100644
--- a/board/amlogic/p212/README
+++ b/board/amlogic/p212/README
@@ -20,6 +20,13 @@ Schematics are available from Amlogic on demand.
Currently the u-boot port supports the following devices:
- serial
- eMMC, microSD
+ - Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - USB Host
+ - ADC
u-boot compilation
==================
--
2.7.4
next reply other threads:[~2018-06-27 15:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-27 15:19 Neil Armstrong [this message]
2018-07-20 12:35 ` [U-Boot,u-boot] boards: amlogic: Fix boards README Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530112742-13618-1-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox