Re: [PATCH v11 3/7] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF

[Jerome Brunet <jbrunet@baylibre.com>]

On Mon 25 Mar 2024 at 12:09, Neil Armstrong <neil.armstrong@linaro.org> wrote:

> In order to setup the DSI clock, let's make the unused VCLK2 clock path
> configuration via CCF.
>
> The nocache option is removed from following clocks:
> - vclk2_sel
> - vclk2_input
> - vclk2_div
> - vclk2
> - vclk_div1
> - vclk2_div2_en
> - vclk2_div4_en
> - vclk2_div6_en
> - vclk2_div12_en
> - vclk2_div2
> - vclk2_div4
> - vclk2_div6
> - vclk2_div12
> - cts_encl_sel
>
> vclk2 and vclk2_div uses the newly introduced vclk regmap driver
> to handle the enable and reset bits.
>
> In order to set a rate on cts_encl via the vclk2 clock path,
> the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
> to keep CCF from selection a parent.
> The parents of cts_encl_sel & vclk2_sel are expected to be defined
> in DT or manually set by the display driver at some point.
>
> The following clock scheme is to be used for DSI:
>
> xtal
> \_ gp0_pll_dco
>    \_ gp0_pll
>       |- vclk2_sel
>       |  \_ vclk2_input
>       |     \_ vclk2_div
>       |        \_ vclk2
>       |           \_ vclk2_div1
>       |              \_ cts_encl_sel
>       |                 \_ cts_encl	-> to VPU LCD Encoder
>       |- mipi_dsi_pxclk_sel
>       \_ mipi_dsi_pxclk_div
>          \_ mipi_dsi_pxclk		-> to DSI controller
>
> The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
> in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.
>
> The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
> DSI bitclock is the reference base clock to calculate the vclk2_div value
> when pixel clock is set on the cts_encl endpoint.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  drivers/clk/meson/Kconfig |  1 +
>  drivers/clk/meson/g12a.c  | 72 ++++++++++++++++++++++++++++++++++-------------
>  2 files changed, 53 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 8a9823789fa3..59a40a49f8e1 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -144,6 +144,7 @@ config COMMON_CLK_G12A
>  	select COMMON_CLK_MESON_EE_CLKC
>  	select COMMON_CLK_MESON_CPU_DYNDIV
>  	select COMMON_CLK_MESON_VID_PLL_DIV
> +	select COMMON_CLK_MESON_VCLK
>  	select MFD_SYSCON
>  	help
>  	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index 90f4c6103014..083882e53b65 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -22,6 +22,7 @@
>  #include "clk-regmap.h"
>  #include "clk-cpu-dyndiv.h"
>  #include "vid-pll-div.h"
> +#include "vclk.h"
>  #include "meson-eeclk.h"
>  #include "g12a.h"
>  
> @@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
>  		.ops = &clk_regmap_mux_ops,
>  		.parent_hws = g12a_vclk_parent_hws,
>  		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
> -		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
> +		.flags = CLK_SET_RATE_NO_REPARENT,
>  	},
>  };
>  
> @@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>  	},
>  };
>  
> @@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
>  };
>  
>  static struct clk_regmap g12a_vclk2_div = {
> -	.data = &(struct clk_regmap_div_data){
> -		.offset = HHI_VIID_CLK_DIV,
> -		.shift = 0,
> -		.width = 8,
> +	.data = &(struct meson_vclk_div_data){
> +		.div = {
> +			.reg_off = HHI_VIID_CLK_DIV,
> +			.shift   = 0,
> +			.width   = 8,
> +		},
> +		.enable = {
> +			.reg_off = HHI_VIID_CLK_DIV,
> +			.shift   = 16,
> +			.width   = 1,
> +		},
> +		.reset = {
> +			.reg_off = HHI_VIID_CLK_DIV,
> +			.shift   = 17,
> +			.width   = 1,
> +		},
> +		.flags = CLK_DIVIDER_ROUND_CLOSEST,
>  	},
>  	.hw.init = &(struct clk_init_data){
>  		.name = "vclk2_div",
> -		.ops = &clk_regmap_divider_ops,
> +		.ops = &meson_vclk_div_ops,
>  		.parent_hws = (const struct clk_hw *[]) {
>  			&g12a_vclk2_input.hw
>  		},
>  		.num_parents = 1,
> -		.flags = CLK_GET_RATE_NOCACHE,
> +		.flags = CLK_SET_RATE_GATE,
>  	},
>  };
>  
> @@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
>  };
>  
>  static struct clk_regmap g12a_vclk2 = {
> -	.data = &(struct clk_regmap_gate_data){
> -		.offset = HHI_VIID_CLK_CNTL,
> -		.bit_idx = 19,
> +	.data = &(struct meson_vclk_gate_data){
> +		.enable = {
> +			.reg_off = HHI_VIID_CLK_CNTL,
> +			.shift   = 19,
> +			.width   = 1,
> +		},
> +		.reset = {
> +			.reg_off = HHI_VIID_CLK_CNTL,
> +			.shift   = 15,
> +			.width   = 1,
> +		},
>  	},
>  	.hw.init = &(struct clk_init_data) {
>  		.name = "vclk2",
> -		.ops = &clk_regmap_gate_ops,
> +		.ops = &meson_vclk_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
>  			&g12a_vclk2_div2_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
>  			&g12a_vclk2_div4_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
>  			&g12a_vclk2_div6_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
>  			&g12a_vclk2_div12_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
>  		.ops = &clk_regmap_mux_ops,
>  		.parent_hws = g12a_cts_parent_hws,
>  		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
> -		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };
>  
> @@ -3717,15 +3742,22 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
>  		.ops = &clk_regmap_mux_ops,
>  		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
>  		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
> -		.flags = CLK_SET_RATE_NO_REPARENT,
> +		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> +/* Force as bypass by forcing a single /1 table entry, and not rely of boot value */

The comment here is not entirely accurate.

The table below will actually force to only use a 1 divider on
.set_rate(), not on boot, AFAICT.

The boot value will stay in the register until the first call to set_rate().

Considering this is quite fragile as it is, It would be nice to prefix
the updated comment with "FIXME"

> +static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
> +	{ .val = 0, .div = 1 },
> +	{ /* sentinel */ },
> +};
> +
>  static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
>  	.data = &(struct clk_regmap_div_data){
>  		.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>  		.shift = 0,
>  		.width = 7,
> +		.table = g12a_mipi_dsi_pxclk_div_table,
>  	},
>  	.hw.init = &(struct clk_init_data){
>  		.name = "mipi_dsi_pxclk_div",


-- 
Jerome

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic